Post on 19-Sep-2018
www.spray.es | www.Multi-Lube.com
El recientemente desarrollado sistema de pulverización AutoJet HP170 ha sido específicamente diseñado para aplicaciones en las que las líneas con variaciones de velocidad requieren una cantidad constante de lubricante por m2. El sistema AutoJet HP170 funciona a velocidades de línea de hasta 300 m/min. proporcionando una cantidad pre-establecida de lubricante distribuida de manera uniforme a través de la bobina sin importar cuál sea la velocidad del motor. Nuestros controladores de modulación por ancho de pulsos (PWM, por sus siglas en inglés) y boquillas de pulverización PulsaJet ajustan el flujo del lubricante a las variaciones de velocidad durante la operación: el resultado logrado es una aplicación consistente, de principio a fin. Desde velocidades lentas hasta velocidades rápidas y viceversa, la cantidad que usted pre-establezca será la cantidad que usted obtendrá.Es muy fácil configurar y operar el sistema. Sólo ingrese la cantidad de lubricante requerida, seleccione la cantidad de boquillas en base al ancho de la bobina y ¡presione marcha! El avanzado controlador AutoJet, permite que las boquillas de pulverización PulsaJet con coeficientes de reducción de más de 1:100, garanticen que el nivel de aplicación sea siempre perfecto. Los pulverizadores totalmente hidráulicos pueden utilizarse para la mayoría de aplicaciones, aunque para aceites extremadamente viscosos también contamos con una boquilla asistida por aire. El sistema HP170 sirve para la mayoría de aceites a base de ceras, tales como Fuchs Anticorit, PL3802-39S y Anticorit RP4107S. Estos tipos de aceites contienen ceras en su formulación, lo que los hace más tixotrópicos, permitiéndoles así permanecer en la bobina bajo cualquier condición. Sin embargo, los aceites a base de ceras deben aplicarse a temperaturas elevadas, a veces superiores a los 55°C. El sistema HP710 cuenta con control de temperatura incorporado, lo que permite al operador seleccionar la temperatura del aceite correcta en el proceso.
IDEAL PARA
• Pulverizar aceites a base de ceras (tales como Fuchs Anticorit) y
otros aceites de alta viscosidad
• Pulverizar aceites en operaciones de rajado/corte y retroceso
• Pulverizar en aplicaciones con variaciones de velocidad altas Panel de control
Lubricador de bobina para chapa de 2.200 mm de ancho
Unidad base que muestra el tanque térmico, el calentador y el mezclador incorporados
AutoJet® System HP170Sistema de pulverización de aceites con control de temperatura de alta precisión
ESPECIFICACIONES
Sistema con control de temperatura, con recirculación de aceite
Calentador interno (temperatura de aplicación de 60°C)
Control del nivel de flujo mediante modulación por ancho de pulsos (PWM)Tanque de 150 litros con agitador y sensor de nivel de líquido
No se requiere aire comprimido
DImENSIONES y PESOS
SIStEmA DE PulvErIzACIóN AutOJEt HP170
Disponible para todos los anchos de bandas
Tipo de boquilla: Boquilla atomizadora de aire o hidráulica PulsaJet
SISTEMA DE PULVERIZACION AUTOjET® HP 170
Bulletin Nr. 1.616-SP (01/2014)· © 2014 Spraying Systems Deutschland GmbH Subject to technical changes · Duplication and reproduction - even in part - is prohibited
Spraying Systems Spain Agustin Lara, 1 bis 28023 Madrid
Tel: +34 91 357 40 20 Fax: +34 91 357 43 03 E-Mail: info@spray.es Internet: www.spray.es
E.C.O. # CHANGESNO: E.C.O. WAS DATE REQ. BY CHECK UNLESS OTHERWISE SPECIFIED:
DIMENSIONS GIVEN IN MILLIMETERS.
DO NOT SCALE DRAWING, WORK TO DIMENSIONS.
TOLERANCES
WHOLE NUMBER 1
CONFIDENTIALDES. BY: SCALE:
DR. BY: CH. BY:
DWG. NO.
DATE: SHT: SIZE:
Belmhel 1 / 12Belmhel
Assembly Spraying Unit
31/01/2012 1 1 OF A3
FIRST ANGLE
A Division of Spraying Systems Co.Rte Blanche-13120 Gardanne
Tel *33.4.42.50.92.89 Fax *33.4.42.50.92.90
This drawing is the exclusive property of AutoJet technologies bvba, Gent, Belgium and is provided withoutconsiderations than the agreement and condition that it is not to be reproduced, copied or otherwise disposed of, directly or indirectly, and exept upon the direction of AutoJet technologies bvba, it is not to be used in whole orin part to assist in making or to furnish any information for the making of drawings, prints, apparatus or parts thereof.
DESCRIPTION:
ONE PLACE DECIMALS 0.5
TWO PLACE DECIMALS 0.05
ANGULAR DIMENSIONS 1
PJ-F620015-301
REMOVE ALL BURRS
ASSEMBLY, DRILL, PUNCH,& COMMERCIAL STOCKSIZES NOT INCLUDED IN
THE TOLERANCES.
1300
1866
740
382.5
Oil Outlet1"BSP
Oil Inlet1"BSP
Cabezal pulverizador(dentro del lubricador de bobina)
pulveriza el aceite en chapas o láminas de metal
Comuníquese con su ingeniero local de Spraying Systems en www.spray.es oder www.Multi-Lube.com
E.C.O. #
CHANGES
NO: E.C.O.WAS
DATE REQ. BY CHECK UNLESS OTHERWISE SPECIFIED:
DIMENSIONS GIVEN IN MILLIMETERS.DO NOT SCALE DRAWING, WORK TO DIMENSIONS.
TOLERANCES
WHOLE NUMBER1
CONFIDENTIAL DES. BY:
SCALE:
DR. BY:
CH. BY:
DWG. NO.
DATE:
SHT:SIZE:
Belmhel1 / 12
Belmhel
Assembly Spraying Unit
31/01/20121 1 OF
A3
FIRST ANGLE
A Division of Spraying Systems Co.
Rte Blanche-13120 Gardanne
Tel *33.4.42.50.92.89 Fax *33.4.42.50.92.90
This drawing is the exclusive property of AutoJet
technologies bvba, Gent, Belgium and is provided without
considerations than the agreement and condition that it is
not to be reproduced, copied or otherwise disposed of,
directly or indirectly, and exept upon the direction of
AutoJet technologies bvba, it is not to be used in whole or
in part to assist in making or to furnish any information for
the making of drawings, prints, apparatus or parts thereof.
DESCRIPTION:
ONE PLACE DECIMALS 0.5
TWO PLACE DECIMALS 0.05
ANGULAR DIMENSIONS 1
PJ-F620015-301
REMOVE ALL BURRS
ASSEMBLY, DRILL, PUNCH,
& COMMERCIAL STOCK
SIZES NOT INCLUDED IN
THE TOLERANCES.
1300
1866
740
382.5
Oil Outlet1"BSP
Oil Inlet1"BSP