Post on 24-Nov-2020
Copyright © 2009 Alumil
M14500 Deluxe Light
V05.2009002
Γενικές Πληροφορίες | General Information
M14500 Deluxe Light
Alumil M14500 Deluxe Light
M14500 Deluxe Light
Alumil M14500 Deluxe LightV05.2009 003
Γενικές Πληροφορίες | General Information
ÐíåõìáôéêÜ Äéêáéþìáôá:ÐíåõìáôéêÜ Äéêáéþìáôá © 2009 ALUMIL A.E. Áðáãïñåýåôáé ç áíáäçìïóßåõóç, ïëéêÞ Þ ìåñéêÞ áíôéãñáöÞ êåéìÝíùí, öùôïãñáöéþí êáé ãåíéêüôåñá ðëçñïöïñéþí ðïõ ðåñéÝ÷ïíôáé óôéò óåëßäåò ôïõ åã÷åéñßäéïõ êáé äåí áðïôåëïýí áíáäçìïóßåõóç áðü Üëëåò ðçãÝò. ¼ëá ôá êåßìåíá, ãñáöéêÜ, åéêüíåò ðïõ ðáñïõóéÜæïíôáé óå ïðïéïäÞðïôå ôìÞìá ôïõ åã÷åéñßäéïõ áðïôåëïýí ðíåõìáôéêÞ éäéïêôçóßá ôïõ äçìéïõñãïý ôïõò. ÊÜèå áíáäçìïóßåõóç, ç áíáðáñáãùãÞ, óå ïðïéïäÞðïôå ìÝóï, ìåôÜ Þ Üíåõ åðåîåñãáóßáò, ðåñéå÷ïìÝíùí ôïõ åã÷åéñßäéïõ ÷ùñßò ðñïçãïýìåíç Ýããñáöç Üäåéá, äåí åðéôñÝðåôáé. Ç ìç åðéôñåðôÞ ÷ñÞóç ôïõ õëéêïý ôïõ åã÷åéñßäéïõ óçìáßíåé áõôüìáôá êáôáëïãéóìü åõèõíþí óýìöùíá ìå ôïí Í. 2121/93 êáé ôïõò êáíüíåò äéåèíïýò äéêáßïõ ðïõ éó÷ýïõí óôçí ÅëëÜäá.
ÁðïêÞñõîç Åõèýíçò:Ðñïóðáèïýìå íá êÜíïõìå áõôü ôï åã÷åéñßäéï êáé ôá ðåñéå÷üìåíá ôïõ áîéüðéóôá, áëëÜ ôõ÷üí áíáêñßâåéåò ìðïñåß íá ðñïêýøïõí. Ç åôáéñåßá äåí åõèýíåôáé ãéá ôõðïãñáöéêÜ ëÜèç, ðáñáëåßøåéò êáé áíáêñßâåéåò óå áõôü ôï åã÷åéñßäéï. Ïé ðëçñïöïñßåò óå áõôü ôï åã÷åéñßäéï õðüêåéíôáé óå áëëáãÞ ÷ùñßò ðñïåéäïðïßçóç.
Copyright Notice:Copyright © 2009 Alumil S.A. All rights reserved. None of the materials provided on this manual may be used, reproduced or transmitted, in whole or in part, in any form or by any means, electronic or mechanical, including photocopying, recording or the use of any information storage and retrieval system without permission in writing from the publisher.
Disclaimer of Liability: In preparation of this manual, every effort has been made to offer the most current, correct, and clearly expressed information possible. Nevertheless, inadvertent errors in information may occur. In particular but without limiting anything here, Alumil S.A. disclaim any responsibility for typographical errors and inaccuracy of the information that may be contained in this manual. The information in this manual is subject to change without notice to the User. Alumil S.A. and its authorized agents and dealers make no warranties or representations whatsoever regarding the quality, content, completeness, suitability, adequacy, sequence, accuracy, or timeliness of information contained in this manual.
General Information
1. Aluminium as a fabrication material
Aluminium has the capability of being extruded into complex shapes to exact tolerances. Aluminium can be formed into literally thousands of unique profiles, each one able to meet a number of specific structural and aesthetic requirements. It is this capability to provide simple elegant solutions to extremely complex design problems that has led to aluminium's enduring appeal. Aluminium is chosen for outside use because it is a stable, corrosion-resistant and light weight metal. One of aluminium's primary appeals to a specifier is its exceptional strength to weight ratio. At 2.7g/cm2, aluminium is 66% lighter than steel. It is also far less susceptible to brittle fractures. Indeed, when aluminium and steel structures are compared, aluminium's greater modulus of elasticity means that weight ratios of 1:2 are easily attained. It can also be processed at high cutting speeds and welded connections are not necessary. These advantages help to reduce fabrication time. Alumil constructions are realized with aluminium profiles extruded in the alloy EN AW 6060 according to EN 755-1. The mechanical characteristics conform to the standard EN 755-2, with a modulus
2 of elasticity of 70kN/mm .The tolerances are based on EN 755-3.
2. Contact with other materials
2.1 Metals
When two metals of differing electro-negativity values come into contact in humid conditions, an electrical tension and oxidizing are experienced by the more electro-negative metal. Aluminium is electro-negative compared to most metals. Unprotected steel rusts and attacks aluminium. In order to avoid corrosion on aluminium, an insulating barrier should be placed between the two metals. Contact with stainless steel on the other hand has not been found to be harmful to aluminium to date. Contact with copper and its alloys is extremely harmful to aluminium. It is absolutely necessary to insulate these two metals. Lead is also more electro-positive than aluminium and should be insulated as well.
2.2 Timber
Most timbers have no harmful effects on aluminium. Some such as oak and walnut however, produce acids which attach and damage aluminium. These effects occur especially in humid conditions or when the timber is not sufficiently dry. Insulation is recommended by using a bituminous paint. When you treat timber against humidity and insects you should check that the chemical substances used in the treatment are not harmful to aluminium. Products containing copper salts, mercury salts, and fluoride compounds are very harmful to aluminium and should be avoided. 2.3 Lime/Cement
In humid conditions, lime or cement reacts with aluminium (even when anodized) revealing superficial white spots on the surface of the metal after cleaning. It is advisable to protect the aluminium during installation with ALUMIL protective foil.
Γενικές Πληροφορίες
1. Το αλουμίνιο ως δομικό υλικό
Με την μέθοδο της διέλασης το αλουμίνιο έχει την δυνατότητα να δημιουργεί πολύπλοκες διατομές με ανοχές ακριβείας. Το αλουμίνιο μπορεί να μορφοποιηθεί σε πραγματικά απεριόριστο αριθμό μοναδικών προφίλ, καθένα από τα οποία ικανοποιεί ειδικές δομικές και αισθητικές απαιτήσεις. Αυτή η ικανότητα του υλικού να προσφέρει απέριττες και καλαίσθητες λύσεις σε ιδιαίτερα πολύπλοκα σχεδιαστικά προβλήματα το οδήγησε στην ηγετική θέση που κατέχει σήμερα. Το αλουμίνιο επιλέγεται για το εξωτερικό των κτιρίων γιατί είναι σταθερό, ανθεκτικό στη διάβρωση και ελαφρύ μέταλλο. Μια από τις πιο δελεαστικές ιδιότητες του αλουμινίου για τον μηχανικό, είναι ο καταπληκτικός λόγος αντίστασης/βάρους. Στα 2,7
2gr/cm , το αλουμίνιο είναι 66% πιο ελαφρύ από τον χάλυβα. Επίσης είναι ανθεκτικό σε ψαθυρή θραύση. Όταν γίνεται σύγκριση μεταξύ κατασκευών αλουμινίου και κατασκευών χάλυβα, ο μεγαλύτερος συντελεστής ελαστικότητας του αλουμινίου σημαίνει ότι ο λόγος βάρους 1:2 επιτυγχάνεται εύκολα. Ακόμη, μπορεί να κατεργαστεί με υψηλές ταχύτητες κοπής και οι συγκολλητές συνδέσεις δεν είναι απαραίτητες. Αυτά τα πλεονεκτήματα συμβάλλουν στην μείωση των χρόνων κατασκευής. Τα προφίλ που συνθέτουν τα συστήματα της Alumil είναι από κράμα ΕΝ AW 6060 σύμφωνα με το εναρμονισμένο πρότυπο (ΕΝ) 755-1. Τα μηχανικά χαρακτηριστικά συμμορφώνονται με το πρότυπο ΕΝ 755-2, με συντελεστή
2ελαστικότητας 70kN/mm . Οι ανοχές βασίζονται στο ΕΝ 755-3.
2. Επαφή με άλλα υλικά
2.1 Μέταλλα
Όταν δύο μέταλλα με διαφορετική ηλεκτροαρνητικότητα (electro-negativity) έρχονται σε επαφή σε υγρό περιβάλλον, το πιο ηλεκτροαρνητικό από τα δύο, μέταλλο, υφίσταται μια ηλεκτρική και οξειδωτική τάση. Το αλουμίνιο είναι περισσοτερό ηλεκτροαρνητικό συγκρινόμενο με τα αλλα μέταλλα. Ο εκτεθειμένος (απροστάτευτος) χάλυβας, οξειδώνεται και επιτίθεται στο αλουμίνιο. Για να αποφευχθεί η διάβρωση του αλουμινίου, θα πρέπει να τοποθετείται μεταξύ των δύο μετάλλων ένα μονωτικό διαχωριστικό. Αντιθέτως, η επαφή με τον ανοξείδωτο χάλυβα, από όσα γνωρίζουμε μέχρι σήμερα, δεν φαίνεται να βλάπτει το αλουμίνιο. Η επαφή με τον χαλκό και τα κράματά του είναι εξαιρετικά επιζήμια για το αλουμίνιο και η προστασία με επιφανειακή μόνωση αυτών των δύο υλικών απαιτείται. Τέλος και ο μόλυβδος είναι πιο ηλεκτροθετικός από το αλουμίνιο και θα πρέπει να μονώνεται επίσης.
2.2 Ξύλο
Τα περισσότερα είδη ξυλείας δεν έχουν επιβλαβείς επιπτώσεις στο αλουμίνιο. Ορισμένα είδη ξυλείας όμως, όπως η δρυς και η καρυδιά, παράγουν οξέα τα οποία προσβάλλουν και φθείρουν το αλουμίνιο. Αυτά τα φαινόμενα παρατηρούνται κυρίως σε συνθήκες αυξημένης υγρασίας στο περιβάλλον ή όταν το ξύλο δεν είναι αρκετά στεγνό. Συνιστάται η μόνωση με την χρήση ασφαλτούχου χρώματος. Επίσης όταν το ξύλο υποβάλλεται σε επεξεργασίες για την προφύλαξή του από την υγρασία και τα έντομα, θα πρέπει να ελέγχεται ότι οι χημικές ουσίες που χρησιμοποιούνται για την κατεργασία δεν είναι επιβλαβείς για το αλουμίνιο. Προϊόντα που στην σύνθεσή τους περιέχεται στεατικός χαλκός, άλατα υδραργύρου και φθοριούχες ενώσεις, είναι πολύ επιβλαβή για το αλουμίνιο και θα πρέπει να αποφεύγονται.
2.3 Ασβέστης/Τσιμέντο
Σε συνθήκες υγρασίας, ο ασβέστης ή το τσιμέντο αντιδρούν με το αλουμίνιο (ακόμη και όταν είναι ανοδιωμένο) αποκαλύπτοντας επιφανειακές λευκές κηλίδες στην επιφάνεια του μετάλλου μετά τον καθαρισμό. Συνιστάται να προστατεύεται το αλουμίνιο κατά την τοποθέτηση με το προστατευτικό φιλμ της Alumil.
V05.2009004
Γενικές Πληροφορίες | General Information
M14500 Deluxe Light
Alumil M14500 Deluxe Light
M14500 Deluxe Light
Alumil M14500 Deluxe LightV05.2009 005
Γενικές Πληροφορίες | General Information
3.Surface treatment
The following colours are available:Anodised finish:
Natural colour etchedBronze colourSpecial anodised colours
The anodising process is carried out according to the EWAA-EURAS regulations.Painted finish:
WhiteBrownRAL coloursSable colours
The painting process is carried out in accordance to Qualicoat regulations.
4.Storage
To avoid superficial damage the following precautions should be taken:
4.1 Store the profiles in a dry area4.2 Avoid any contact with steel by protecting the profiles with
wrapping paper or plastic foil. In humid areas rust and steel burr can damage the surface finish.
4.3 Store the profiles horizontally in such a way as to eliminate the possibility of damaging or scratching the profiles while removing them.
4.4 Store the profiles in packed form.
5.Aluminium maintenance
Both anodised and painted aluminium should be cleaned on a regular basis. For rural areas that are not subjected to aggressive elements like air pollution or salty air, it is sufficient to clean the aluminium whenever you clean the glass. Lukewarm water should be with a non-aggressive, non-acetous detergent without ammonia for cleaning the aluminium. Then you should thoroughly rinse the aluminium with clear water and dry absorbing cloth. In urban areas or areas near to the sea, the aluminium should be cleaned more often and more thoroughly. Areas that are not exposed to rainfall should be cleaned more frequently than other surfaces. If water and mild detergents are not enough to clean the aluminium constructions there are detergents that have been specially developed for aluminium surfaces. These detergents contain light abrasive elements and can be used with a synthetic cleaning cloth. In all cases it is important to completely rinse surfaces with clear water and dry them thoroughly, especially the corners and the bottom profile. In order to protect and increase the life cycle of the aluminium, it may be treated with a very thin clear coat of water resistant film available from ALUMIL.
3.Επιφανειακή επεξεργασία
Είναι διαθέσιμα τα παρακάτω χρώματα:
Αποχρώσεις ανοδίωσης:
Φυσικό ματ χρώμαΜπρούτζινο χρώμαΕιδικές αποχρώσεις ανοδίωσης
Η διαδικασία ανοδίωσης γίνεται σύμφωνα με τις προδιαγραφές της EWAA-EURAS.
Χρώματα ηλεκτροστατικής βαφής:
ΛευκόΚαφέΧρώματα RAL Χρώματα SABLE
Η διαδικασία της ηλεκτροστατικής βαφής γίνεται σύμφωνα με τις προδιαγραφές της Qualicoat.
4.Αποθήκευση
Για την αποφυγή επιφανειακών φθορών πρέπει να παίρνονται οι παρακάτω προφυλάξεις:
4.1 Τα προφίλ να αποθηκεύονται σε χώρο που δεν υπάρχει υγρασία4.2Να αποφεύγεται οποιαδήποτε επαφή με χάλυβα, προστατεύοντας τα
προφίλ με χαρτί συσκευασίας ή πλαστική μεμβράνη. Σε υγρές περιοχές σκουριά και ρινίσματα χάλυβα μπορούν να προκαλέσουν φθορές στην επιφανειακή επεξεργασία.
4.3 Τα προφίλ πρέπει να αποθηκεύονται σε οριζόντια θέση με τρόπο που να αποκλείεται η πιθανότητα φθοράς ή γρατσουνίσματος κατά την μετακίνησή τους.
4.4 Τα προφίλ να αποθηκεύονται συσκευασμένα.
5.Συντήρηση του αλουμινίου
Τόσο το ανοδιωμένο όσο και το ηλεκτροστατικά βαμμένο αλουμίνιο, πρέπει να καθαρίζονται σε τακτά διαστήματα. Σε αγροτικές περιοχές που δεν επηρεάζονται από επιθετικά περιβαλλοντικά φαινόμενα όπως ατμοσφαιρική ρύπανση ή αλατώδες περιβάλλον, ο καθαρισμός μπορεί να γίνεται μαζί με τον καθαρισμό των τζαμιών. Για τον καθαρισμό του αλουμινίου συνιστάται η χρήση χλιαρού νερού και ενός «μαλακού» απορρυπαντικού που να μην είναι όξινο και να μην περιέχει αμμωνία. Μετά, πρέπει να ξεβγάζεται επιμελώς με νερό και να στεγνώνεται με ένα μαλακό απορροφητικό πανί. Σε αστικές ή παραθαλάσσιες περιοχές, ο καθαρισμός του αλουμινίου πρέπει να γίνεται πιο συχνά και με πολύ μεγάλη επιμέλεια. Οι επιφάνειες αλουμινίου που δεν εκτίθενται στην βροχή πρέπει να καθαρίζονται με μεγαλύτερη συχνότητα από τις εκτεθειμένες στην βροχή. Αν το νερό και τα μαλακά απορρυπαντικά δεν επαρκούν για τον καλό καθαρισμό του αλουμινίου, υπάρχουν και ειδικά για το αλουμίνιο απορρυπαντικά. Αυτά τα απορρυπαντικά περιέχουν ελαφρώς λειαντικά ψήγματα και μπορούν να χρησιμοποιηθούν σε συνδυασμό με ένα συνθετικό πανί καθαρισμού. Σε όλες τις περιπτώσεις είναι πολύ σημαντικό να ξεπλένονται καλά οι επιφάνειες και να στεγνώνονται επιμελώς, ειδικά οι γωνίες και τα προφίλ που έρχονται σε επαφή με το έδαφος. Για την προστασία και την επιμήκυνση του κύκλου ζωής του αλουμινίου, μπορεί να υποβάλλεται σε βελτιωτική επεξεργασία με ένα πολύ λεπτό επίχρισμα αδιάβροχου φιλμ, διαθέσιμο από την ALUMIL.
EN 10211
EN 12020-1
EN 12020-2
EN 12046
EN 12152
EN 12153
EN 12154
EN 12155
EN 12179
EN 12207
EN 12208
EN 12210
EN 12211
EN 12400
EN 12519
EN 12567
EN 13049
EN 13115
EN 13141
Θερμικές γέφυρες σε κτιριακές κατασκευές - Ροές θερμότητας και επιφανειακές θερμοκρασίες - Μέρος 1-2
Αλουμίνιο και κράματα αλουμινίου - Διελασμένο προφίλ ακριβείας από κράματα EN AW-6060 και EN AW-6063 - Μέρος 1: Τεχνικές συνθήκες για έλεγχο και παράδοση
Αλουμίνιο και κράματα αλουμινίου - Διελασμένο προφίλ ακριβείας από κράματα EN AW-6060 και EN AW-6063 - Μέρος 2: Ανοχές διαστάσεων και μορφή
Δυνάμεις χειρισμού - Μέθοδος δοκιμής - Μέρος 1-2
Υαλοπετάσματα - Αεροδιαπερατότητα - Απαιτήσεις επιδόσεων και ταξινόμηση
Υαλοπετάσματα - Αεροπερατότητα - Μέθοδος δοκιμής
Υαλοπετάσματα - Υδατοστεγανότητα - Απαιτήσεις απόδοσης και ταξινόμηση
Υαλοπετάσματα - Υδατοστεγανότητα - Εργαστηριακή δοκιμή υπό στατική πίεση
Υαλοπετάσματα - Αντίσταση στην ανεμοπίεση - Μέθοδος δοκιμής
Παράθυρα και πόρτες - Αεροπερατότητα - Ταξινόμηση
Παράθυρα και πόρτες - Υδατοπερατότητα - Ταξινόμηση
Παράθυρα και πόρτες - Αντίσταση στην ανεμοπίεση - Ταξινόμηση
Παράθυρα και πόρτες - Αντίσταση στην ανεμοπίεση - Μέθοδος δοκιμής
Παράθυρα και πόρτες - Μηχανική ανθεκτικότητα - Απαιτήσεις και ταξινόμηση
Παράθυρα και πόρτες για πεζούς - Ορολογία
Θερμική απόδοση παραθύρων και θυρών - Προσδιορισμός της θερμικής μετάδοσης με τη μέθοδο θερμής πλάκας - Μέρος 1
Παράθυρα - Κρούση με μαλακό και βαρύ σώμα - Μέθοδος δοκιμής, απαιτήσεις ασφαλείας και ταξινόμηση
Παράθυρα - Ταξινόμηση μηχανικών ιδιοτήτων - Φορτία που εξασκούνται κάθετα, κατά την στρέψη και κατά την λειτουργία
Αερισμός κτιρίων - Δοκιμές επίδοσης συστατικών μερών / προϊόντων για αερισμό κατοικιών - Μέρος 1-8
Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations (ISO 10211:2007) Parts 1-2
Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection and delivery
Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2: Tolerances on dimensions and form
Operating forces - Test method - Part 1: Windows Part 2: Doors
Curtain walling - Air permeability - Performance requirements and classification
Curtain walling - Air permeability - Test method
Curtain walling - Watertightness - Performance requirements and classification
Curtain walling - Watertightness - Laboratory test under static pressure
Curtain walling - Resistance to wind load - Test method
Windows and doors - Air permeability - Classification
Windows and doors - Watertightness - Classification
Windows and doors - Resistance to wind load - Classification
Windows and doors - Resistance to wind load - Test method
Windows and pedestrian doors - Mechanical durability - Requirements and classification
Windows and pedestrian doors - Terminology
Thermal performance of windows and doors - Determination of thermal transmittance by hot box method - Part 1-2
Windows - Soft and heavy body impact - Test method, safety requirements and classification
Windows - Classification of mechanical properties - Racking, torsion and operating forces
Ventilation for buildings - Performance testing of components/products for residential ventilation Parts 1-8
European standards and reference materialΕυρωπαϊκά πρότυπα και προδιαγραφές
V05.2009006
Γενικές Πληροφορίες | General Information
M14500 Deluxe Light
Alumil M14500 Deluxe Light
EN 13123
EN 13124
ENV 13420
EN 13501
EN 13541
EN 14351
EN 14600
EN 14608
EN 14609
Παράθυρα, πόρτες κ;αι εξώφυλλα - Αντίσταη στις εκρήξεις - Απαιτήσεις και ταξινόμηση - Μέρος 1-2
Παράθυρα, πόρτες και εξώφυλλα - Αντοχή σε εκρήξεις - Μέθοδοι δοκιμής - Μέρος 1-2
Παράθυρα - Συμπεριφορά μεταξύ διαφορετικών κλιμάκων - Μέθοδος δοκιμής
Ταξινόμηση δομικών προϊόντων και στοιχείων σχετικά με την φωτιά - Μέρος 1-5
Ύαλος για δομική χρήση - Υαλοστάσια ασφαλείας - Δοκιμές για ταξινόμηση της αντίστασης σε πίεση λόγω έκρηξης
Παράθυρα και πόρτες - Πρότυπο προϊόντος, χαρακτηριστικά επίδοσης - Μέρος 1: Παράθυρα και εξωτερικά συστήματα θυρών για πεζούς χωρίς χαρακτηριστικά πυραντίστασης ή/και διαρροής καπνού
Συστήματα θυρών και ανοιγόμενα παράθυρα με χαρακτηριστικά πυραντίστασης ή/και ελέγχου καπνού - Απαιτήσεις και ταξινόμηση
Παράθυρα - Προσδιορισμός της αντίστασης σε κατακόρυφο φορτίο
Παράθυρα - Προσδιορισμός της αντίστασης σε στατική στρέψη
Windows, doors and shutters - Explosion resistance - Requirements and classification Parts 1-2
Windows, doors and shutters - Explosion resistance - Test method Parts 1-2
Windows - Behaviour between different climates - Test method
Fire classification of construction products and building elements Parts 1-5
Glass in building - Security glazing - Testing and classification of resistance against explosion pressure
Windows and doors - Product standard, performance characteristics
Doorsets and openable windows with fire resisting and/or smoke control characteristics - Requirements and classification
Windows - Determination of the resistance to racking
Windows - Determination of the resistance to static torsion
European standards and reference materialΕυρωπαϊκά πρότυπα και προδιαγραφές
M14500 Deluxe Light
Alumil M14500 Deluxe LightV05.2009 007
Γενικές Πληροφορίες | General Information
V05.2009008
Γενικές Πληροφορίες | General Information
M14500 Deluxe Light
Alumil M14500 Deluxe Light
1. Explanation of symbols:
= Not a stock item*= Transom cleat
= Transom, cleat adjustable
I = Couple Cleat
= Reinforcing plate for corners
= Reinforcing plate for joints
= Crimp cleatC
= Nail cleatN
= Spring cleat
= End cover
S
= Corner cleat, adjustable
= Alignment cornerA
1.Επεξήγηση των συμβόλων:
= Τάπα
= Σύνδεσμος τραβέρσας/ταφ
= Ρυθμιζόμενος σύνδεσμος τραβέρσας
I = Προφίλ ενίσχυσης και πυρήνα
= Πλάκα ενίσχυσης για γωνίες
= Πλάκα ενίσχυσης σύνδεσης “T”
= Γωνία σύνδεσης πρεσσαριστήC
= Γωνία σύνδεσης καρφωτήN
= Γωνία σύνδεσης κουμπωτήS
= Γωνία σύνδεσης μεταβλητή
= Γωνία επιπεδότηταςA
= Οδηγός διάτρησης
= Πρεσσάκι
= Μονωτικό υλικό
= ΕιδικόSp
= Κονδύλι
= Ματσόλα από καουτσούκ
= Πριόνι
= στιγμιαία κόλλα
= μονωτική ταινία
= Εξωτερική περίμετρος
= Drill Jig
= Punching Tool
= Sealant
= SpecialSp
= Milling bit
= Rubber mallot
= Saw
= Instant glue
= Sealing tape
= External perimeter
= Profile
= Weight
= Προφίλ
= Βάρος
= Page number
= Αριθμός σελίδας
= Moment of inertia x-x
= Ροπή αδρανείας x-x
= Moment of inertia y-y
= Ροπή αδρανείας y-y
* = Δεν υπάρχει απόθεμα
= Μέγιστο πλάτος
= Μέγιστο ύψος
= Width
= Height
V05.2009 009
Βασικά χαρακτηριστικάBasic characteristics
M14500 Deluxe Light
Alumil M14500 Deluxe Light
V05.2009010
Γενικές Πληροφορίες | General Information
M14500 Deluxe Light
Alumil M14500 Deluxe Light
Τεχνικά χαρακτηριστικά
Κράμα αλουμινίου...............................................AlMgSi (EN AW 6060)Σκληρότητα........................................................12 Webster ή 70 HB minimumΕλάχιστο πάχος Βαφής (Η/Β).............................75μm minimumΠάχος διατομών (min-max)................................1,2 – 1,4 mmΈλεγχος διαστάσεων διατομών..........................Σύμφωνα με EN DIN 12020-2
Διαστάσεις φύλλου (Πλάτος\Ύψος)..................32 \ 82,3 mm
Μέγιστο βάρος υαλοπινάκων.............................120 Kg ανά φύλλο Είδος στεγάνωσης.............................................
ΤΕΧΝΙΚΑ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ ΤΩΝ ΚΑΤΑΣΚΕΥΩΝ ΤΗΣ ΣΕΙΡΑΣ
Είδος κύλισης...................................................Διπλό ράουλο 32mm από teflon, επάνω σε ανοξείδωτο οδηγό
Περιμετρική, με δύο σειρές από βουρτσάκια μεμβράνης Hi-Fin
Βασικά χαρακτηριστικά:
Φύλλο πλάτους 32 mm
Οδηγός κύλισης από ανοξείδωτο ατσάλι για ομαλότερη και αθόρυβη κύλιση
Κορυφαία περιμετρική στεγάνωση με δυο σειρές βουρτσάκια μεμβράνης (Hi-Fin)
Αντικρύσματα κλειδαριάς ενσωματωμένα στον οδηγό για περισσότερη ασφάλεια
Δυνατότητα εφαρμογής κλειδαριάς “χούφτας” ή τύπου “in-line”
Δυνατότητα διπλής υάλωσης έως και 20 mm
Κατασκευαστικές δυνατότητες της σειράς:
Επάλληλο (με ή χωρίς σίτα)Χωνευτό εσωτερικό (τζάμι ή τζάμι και παντζούρι ή τζάμι με σίτα και παντζούρι)Χωνευτό εξωτερικό (τζάμι ή τζάμι και παντζούρι ή τζάμι με σίτα και παντζούρι)
Πιστοποιήσεις
Ο σχεδιασμός , η διαδικασία παραγωγής, και ο ποιοτικός έλεγχος όλων των διατομών της Αλουμύλ έχουν πιστοποιηθεί με το Ευρωπαϊκό πρότυπο ISO 9001.
Η διαδικασία βαφής σε όλα τα βαφεία της Αλουμύλ είναι πιστοποιημένη και διενεργείται σύμφωνα με τα Ευρωπαϊκά πρότυπο βαφής QUALICOAT και RAL (GSB).
Basic characteristics:
Sash width 32 mm Inox steel roller driver for easier and smoother sliding (near zero friction). Use of screw corners in guides without chambers allows sturdy connection and reduces overall frame weight Perimetrical sealing with two rows of high density brushes. Single point lock, with backset application inside the frame's sliding guide. Option of using an “in-line” lock for increased security Supports double glazing up to 20mm
Aluminum alloy............................................................AlMgSi (EN AW 6060)Hardness.....................................................................12 Webster or 70 HB minimumMinimum Powder Coating Thickness............................75μm minimumProfile thickness (min-max)..........................................1,2 – 1,4 mmProfile Geometry Control...............................................EN DIN 12020-2 Compliant
Sash. Dimensions.........................................................32 \ 82,3mm..................................................................Sliding..........................................................................32mm double teflon rollers on steel inox guide................Glazing type..................................................................Single or double up to 20 mmMaximum glazing weight...............................................120 Kg per sashSealing.........................................................................Perimetrical, with two rows of high density brushes
TECHNICAL SPECIFICATIONS OF SYSTEM TYPOLOGIES
Technical characteristics
Product Line Construction Options:
Interlocking (with or without a fly-screen) Internal Fusible (glazing or glazing with shutter or glazing with shutter and fly-screen)External Fusible (glazing or glazing with shutter or glazing with shutter and fly-screen)
Certifications:
The design, the production process, and the quality control of all profiles produced by Alumil are certified with ISO 9001.
The process of electrostatic powder coating is certified by QUALICOAT and RAL (GSB) in all plantsOperated by Alumil.
M14500 Deluxe Light
Alumil M14500 Deluxe LightV05.2009 011
Γενικές Πληροφορίες | General Information
V05.2009012
Ηχομόνωση |Sound insulation
M14500 Deluxe Light
Alumil M14500 Deluxe Light
Values in accordance with EN ISO 717-1Τίμες σύμφωνα με EN ISO 717-1
Glass thickness Sound resistanceglass only
Sound resistanceglass and frame
(Rw) (Rw)(mm)
Πάχοςυαλοπινάκων
Ηχομόνωσηυαλοπινάκων
Ηχομόνωσηυαλοπινάκων και πλαίσιο
7* 35 dB 32 dB
9* 37 dB 34 dB
11* 38 dB 35 dB
13* 39 dB 36 dB
6*/12/4 34 dB 31 dB
6*/12/6 37 dB 34 dB
8*/12/5 38 dB 35 dB
8*/12/8 40 dB 37 dB
* Acoustic PVB laminated safety glass
* Κρύσταλλα ασφαλείας υψηλής ηχομόνωσης (PVB)
M14500 Deluxe Light
Alumil M14500 Deluxe LightV05.2009 013
Θερμομόνωση |Thermal insulation
6,76
Values in accordance with EN ISO 10077-2Τίμες σύμφωνα με EN ISO 10077-2
UFG
190,
0011
0,10
U =1,46 W/(m.K)EF
Φ =-20,9 W/mAD
E F
D
C
V05.2009014
Γενικές Πληροφορίες | General Information
M14500 Deluxe Light
Alumil M14500 Deluxe Light
M14500 Deluxe Light
Alumil M14500 Deluxe LightV05.2009 015
ÅõñåôÞñéï Ðñïößë Profile Index
V05.2009016
Περίληψη Προφίλ |Profile Overview
M14500 Deluxe Light
Alumil M14500 Deluxe Light
132
775
664
747
470
526
465
511
669
384
590
713
0,27
10,13
7,75
9,25
1,45
1,68
0,99
1,84
1,14
0,63
1,60
1,75
0,02
2,90
8,62
2,67
8,81
8,36
12,76
13,73
23,79
4,10
12,71
20,74
74,60
351
374
337,80
247,80
240,80
233,10
224,00
293,60
157,30
275,90
283,60
7,2025,00
65,5028,40
59,2058,00
65,5025,80
80,0024,90
76,8024,70
100,0024,90
90,0024,90
110,0024,90
60,0024,90
87,0024,90
101,1024,90
gr/mcm4 cm4mm
22M9010
M9228
M9223
M9218
M9338
M9338A
M9342
M9353
M9356
M9357
M9368
M9534
mm mm
22
20
22
23
24
24
23
24
24
23
24
520
608
483
582
306
947
841
336
1122
422
1004
1,75
1,09
1,69
1,95
1,72
19,28
12,28
0,92
22,92
1,43
4,11
10,48
11,07
9,96
12,26
0,32
3,39
2,33
0,52
7,49
1,42
22,84
249,10
278,50
255,10
215,40
160,30
370,90
199,90
138,20
447,60
131
525
83,0024,90
84,5024,90
83,2524,90
82,3024,90
39,8021,00
83,0028,40
70,0025,80
19,8024,90
82,3032,00
33,1031,10
37,8078,20
gr/mcm4 cm4mm
24M9538
M9559
M9558
M9553
M12217
M14218
M14219
M14226
M14250
M14254
M14501
mm mm
23
23
24
20
22
22
21
21
22
20
M14500 Deluxe Light
Alumil M14500 Deluxe LightV05.2009 017
Περίληψη Προφίλ |Profile Overview
2340,370,40130,6024,5019,40M12353 21
V05.2009018
Περίληψη Προφίλ |Profile Overview
M14500 Deluxe Light
Alumil M14500 Deluxe Light
1430
713
447
5,80
2,05
1,45
72,75
4,34
3,77
736,80
256,60
247,90
37,80118,20
34,1039,50
33,1053,80
gr/mcm4 cm4mm
20M14502
M14504
M14503
mm mm
21
21
M14500 Deluxe Light
Alumil M14500 Deluxe LightV05.2009 019
Ðñïößë Profiles
Ì14501
M14502
78,20
118,20
37,8
037
,80
120.1041000
40,00
40,00
M12217
21,00
39,8
0
311.12217..
M9223
59,2
0
58,00
V05.2009020
Προφίλ |Profiles
M14500 Deluxe Light
Alumil M14500 Deluxe Light
40,00
120.1041000 120.1041000
M14504 34,10
39,5
0
180.1425000
32,00
82,3
0
M14250M14503
M14226 24,90
19,8
0
M14250
33,10
53,8
0
311.14503..
M12353
M14500 Deluxe Light
Alumil M14500 Deluxe LightV05.2009 021
Προφίλ |Profiles
311.14503..
180.1900000
19,40
24,5
0
311.14504..
140.1126000
M14219 M14218
28,40
83,0
0
M9218
M14254
33
,10
31,10
25,80
70,0
0
311.14219..
M9010
7,20
25,00
65,5
0
M9228
V05.2009022
Προφίλ |Profiles
M14500 Deluxe Light
Alumil M14500 Deluxe Light
25,80 28,40
65,5
0
311.14254..
140.1119000
140.1119000140.1119000
M9538
82,9
0
M9338
80,0
0
ÐÑÏÖÉË ÐÁÍÔÆÏÕÑÉÙÍ - SHUTTERS PROFILE
60,0
0
67,1
0
16,6 pcs/m27,8 kg/m
M9553
82,3
0
67,9
0
14,70 pcs/m28,55 kg/m
M9368
87,0
0
65,2
0
15,3 pcs/m29 kg/m
M9558
67,3
0
83,3
0
14,8 pcs/m27,9 kg/m
14,8 pcs/m27,7 kg/m
M9353
90,0
0
79,9
0
12 pcs/m26,13 kg/m
M14500 Deluxe Light
Alumil M14500 Deluxe LightV05.2009 023
24,90
24,90
24,90
24,90 24,90 24,90
Προφίλ |Profiles
M9534
24,90
91,0
0
M9356
99,7
0
25,00
M9357 M9559
72,3
0
M9338A
24,70
58,7
0
110,
00
100,
00
68,2
0
101,
10
49,7
060,0
0
84,6
0 77,2
0
14,7 pcs/m26,9 kg/m
10 pcs/m27,35 kg/m
10,9 pcs/m27,8 kg/m
20 pcs/m27,7 kg/m
13,8 pcs/m28,4 kg/m
17 pcs/m28,94 kg/m
V05.2009024
Προφίλ |Profiles
M14500 Deluxe Light
Alumil M14500 Deluxe Light
ÐÑÏÖÉË ÐÁÍÔÆÏÕÑÉÙÍ - SHUTTERS PROFILE
M9342
24,90
25,00
25,00
M14500 Deluxe Light
Alumil M14500 Deluxe LightV05.2009 025
TõðïëïãιέςÔypologies
A2
D2
A1
A3
A4B3 B4 B5
B2
B1
C1
C2
C3
C4
D1
D3 D4D3A D4A
D4B
D5
B3 B4 B5 B3B4B5
B2
B1
G1
D1A
D2A
V05.2009026
Τυπολογία|Typology
M14500 Deluxe Light
Alumil M14500 Deluxe Light
E2
E1
E3
E4
A3
A2
A1
A4 A3A4
A1
A2
G1
E1
E2
F1
E4
M14500 Deluxe Light
Alumil M14500 Deluxe LightV05.2009 027
Τυπολογία|Typology
V05.2009028
Τυπολογία|Typology
M14500 Deluxe Light
Alumil M14500 Deluxe Light
M14500 Deluxe Light
Alumil M14500 Deluxe LightV05.2009 029
ÔïìÝòSections
R=1:1
A1
600-02-104-00 600.0214500
32,00 32,008,00
78,20
82,3
027
,80
10,0
072
,30
M14250
M14501
M14250
M14503
660.1214000
660.1226600
660.1214000
200.
0402
301
290.0000..
200.
0402
301
620.
6900
70*
V05.2009030
ÔïìÝò|Sections
M14500 Deluxe Light
Alumil M14500 Deluxe Light
120.1041000
1801425000
620.
6900
70*
620.
6900
70*
311.14503..
180.1900000
140.1126000
180.
1900
000
A2
32,00 32,008,00
78,20
82,3
027
,80
10,0
072
,30
M14250
M14501
M14250
M14503
M12217
660.1226600
M14500 Deluxe Light
Alumil M14500 Deluxe LightV05.2009 031
ÔïìÝò|Sections
120.1041000
311.12217..
311.14503..
1801
4250
..
1801
4250
..
620.
6900
70*
620.
6900
70*
620.
6900
70*
140.1126000
200.
0402
301
200.
0402
301
A3
78,2
0
82,3027,80
10,00 72,30
M14250M14501
32,0
0
V05.2009032
ÔïìÝò|Sections
M14500 Deluxe Light
Alumil M14500 Deluxe Light
620.690070*
620.690070*
620.690070*
180.1900000
180.1900000
180.1425000
290.
0000
...
125.
1041
0..
140.1126000
200.0402301
200.0402301
M14250
M14250
M14503
M14503
82,30
90,50
32,0
0
72,0
0
A4
M14500 Deluxe Light
Alumil M14500 Deluxe LightV05.2009 033
ÔïìÝò|Sections
180.1900000
180.1900000
1801425000
311.09073..
290.
0000
2..
290.
0000
...
1801425000
180.1900000
311.09073..620.690070* 620.690070*
620.690070* 620.690070*
200.0402301
200.0402301
200.0402301
200.0402301
140.1126000
140.1126000
32,00 32,008,00
72,00
82,3
027
,80
10,0
072
,30
M14250M14250
M14501
M9368
C1
660.0026800
V05.2009034
ÔïìÝò|Sections
M14500 Deluxe Light
Alumil M14500 Deluxe Light
290.0000...
180.1900000180.1900000
600.0214500600.0214500
660.1214000
620.
6900
70*
18014250001801425000
620.
6900
70*
620.
6900
70*
620.
6900
70*
620.
6900
70*
200.
0402
301
200.
0402
301
140.1126000140.1126000
660.0026800
32,00 32,008,00
72,00
82,3
027
,80
10,0
072
,30
M14501
M14250M14250
M9368
C2
M14500 Deluxe Light
Alumil M14500 Deluxe LightV05.2009 035
ÔïìÝò|Sections
1801425000
620.
6900
70*
620.
6900
70*
620.
6900
70*
620.
6900
70*
620.
6900
70*
180.1900000
1801425000
200.
0402
301
200.
0402
301
140.1126000140.1126000
M14
250
M14
250
M92
23
M90
10
M92
23
M90
10
M93
68
82,3
035
,00
32,0032,00 8,00
72,00
C3
660.0026800
V05.2009036
ÔïìÝò|Sections
M14500 Deluxe Light
Alumil M14500 Deluxe Light
290.0000...
620.
6900
70*
620.
6900
70*
620.
6900
70*
620.
6900
70*
180.
1900
000
1801425000
200.
0402
301
200.
0402
301
1801425000
180.
1900
000
140.1126000 140.1126000
M14
504
M93
68
M14
250
M14
250
M14
250
M14
250
M93
68
82,3
017
,80
82,3
0
32,0032,00 8,00
72,00
M14
504
C4
M14500 Deluxe Light
Alumil M14500 Deluxe LightV05.2009 037
ÔïìÝò|Sections
290.0000200
290.0000...
311.14504.. 311.14504..
1801425000
180.1900000
240.8100001
180.1425000
620.
6900
70*
620.
6900
70*
180.1900000
200.
0402
301
200.
0402
301
240.8100001
200.
0402
301
200.
0402
301
140.1126000 140.1126000
140.1126000 140.1126000
M14
504
M14
250
M14
250
82,3
017
,80
82,3
0
V05.2009038
ÔïìÝò|Sections
M14500 Deluxe Light
Alumil M14500 Deluxe Light
G1
290.0000...
140.1126000
1801425000
311.14504..
180.1900000
240.8100001
620.
6900
70*
180.1900000
290.0000...
200.
0402
301
200.
0402
301
200.
0402
301
200.
0402
301
140.1126000
660.1226600
40,00 32,00
118,20
82,3
027
,80
10,0
072
,30
M14250
M14250
M14502
M14226
32,00
D1
180-
19-0
00-0
0
600-02-104-00
M14250
M14503
250.
0622
0..
M14500 Deluxe Light
Alumil M14500 Deluxe LightV05.2009 039
ÔïìÝò|Sections
120.1041000
290.0000...
311.14503..
620.
6900
70*
620.
6900
70*
180.1900000180.1900000
660.
1214
000
600.0214500 1801425000
620.
6900
70*
200.
0402
301
200.
0402
301
140.1126000
D2
180-
19-0
00-0
0
40,00 32,00
118,20
82,3
027
,80
10,0
072
,30
M14250
M14250
M14502
M14226
32,00 8,00
660.12266..
180-19-000-00
M14250
M14503
V05.2009040
ÔïìÝò|Sections
M14500 Deluxe Light
Alumil M14500 Deluxe Light
120.1041000
1801425000
620.
6900
70*
620.
6900
70*
620.
6900
70*
180.1900000
311.14503..
140.1126000
250.
0622
0..
200.
0402
301
200.
0402
301
32,0
0
118,
20
37,80
M14250
M14502
M14226
32,0
08,
00
82,3027,80
10,00 72,30
M14250
D3
M14500 Deluxe Light
Alumil M14500 Deluxe LightV05.2009 041
ÔïìÝò|Sections
120.
1041
000
620.690070*
620.690070*
620.690070*
620.690070*
180.1900000
140.1126000
1801425000
250.06220..
290.
0000
...
200.0402301
200.0402301
82,30
90,50
32,0
0
32,0
0
M14250
M14250
M14226
M14503
M14503
82,30
90,50
D4
V05.2009042
ÔïìÝò|Sections
M14500 Deluxe Light
Alumil M14500 Deluxe Light
1801425000
620.690070*311.09073..
311.14503..
180.1900000
620.690070*
180.1900000
140.
1126
000
140.1126000
250.06220..
290.
0000
...
290.
0000
...
200.0402301
200.0402301
200.0402301
200.0402301
600.0120100
M14218
25,80
40,00 32,00
118,20
82,3
027
,80
10,0
072
,30
M14250
M14502
25,80 11,10
D1A
180-
19-0
00-0
0
600-02-104-00
M14250
M14503
M14500 Deluxe Light
Alumil M14500 Deluxe LightV05.2009 043
ÔïìÝò|Sections
120.1041000
660.1214000
620.
6900
70*
620.
6900
70*
620.
6900
70*
620.
0301
20*
180.1900000
311.14503..1801425000
600.0214500
140.1126000
250.06220..
290.0000...
660.1226600
200.
0402
301
200.
0402
301
140.1119000
D2A
M14218
118,20
82,3
027
,80
10,0
072
,30
M14250
M14502
25,80 11,10
180-19-000-00
M14250
M14503
32,00
V05.2009044
ÔïìÝò|Sections
M14500 Deluxe Light
Alumil M14500 Deluxe Light
120.1041000
660.1226600
140.1126000
620.
6900
70*
180.190000062
0.69
0070
*
620.
6900
70*
1801425000
620.
0301
20*
250.
0622
0..
140.1119000
311.14503..
200.
0402
301
200.
0402
301
32,0
0
118,
20
37,80
M14502
28,4
58,
45
82,3027,80
10,00 72,30
M14218
M14250
D3A
M14500 Deluxe Light
Alumil M14500 Deluxe LightV05.2009 045
ÔïìÝò|Sections
120.
1041
000
620.690070*
620.690070*
620.690070*
620.690070*
620.030120*
180.1900000
1801425000140.1126000
290.
0000
...
250.06220..
200.0402301
200.0402301
140.1119000
82,30
90,50
32,0
0
32,0
0
M14503
M14503
M14218
M14250
82,30
90,50
D4A
V05.2009046
ÔïìÝò|Sections
M14500 Deluxe Light
Alumil M14500 Deluxe Light
1801425000
180.1900000
620.690070*
290.
0000
...
290.
0000
...
620.030120*
250.06220..
311.14503..
311.14503..
200.0402301
200.0402301
200.0402301
200.0402301
140.
1126
000
140.
1126
000
140.1119000
82,30
90,50
82,30
90,50
32,0
0
32,0
0
M14503
M14503
M14218
M14250
M14500 Deluxe Light
Alumil M14500 Deluxe LightV05.2009 047
ÔïìÝò|Sections
D4B
180.1900000
1801425000
620.690070*
620.030120*
620.690070*
290.
0000
...
290.
0000
...
620.690070*
620.690070*
250.06220..
311.14503..
311.14503..
200.0402301
200.0402301
200.0402301
200.0402301
140.
1126
000
140.
1126
000
140.1119000
180.1900000
32,0
0
118,
20
37,80
M 14502
28,4
5
82,30 27,80
10,0072,30
M14218
M14250
D5
V05.2009048
ÔïìÝò|Sections
M14500 Deluxe Light
Alumil M14500 Deluxe Light
120.
1041
000
620.690070*
620.690070*
620.690070*
620.030120*
250.06220..
290.
0000
...
140.1126000
180.1425000
200.0402301
200.0402301
140.1119000
600-02-145-00
180-
19-0
00-0
0
32,00
118,20
82,3
027
,80
10,0
072
,30
M14250
M14502
600-02-104-00
M14250
M14503
600-02-104-00
M14250
M14503
B1
M14500 Deluxe Light
Alumil M14500 Deluxe LightV05.2009 049
ÔïìÝò|Sections
120.1041000
660.1214000
620.
6900
70*
660.1226600 660.1226600
1801425000
600.0214500
140.1126000
290.0000...
311.14503.. 311.14503..
200.
0402
301
200.
0402
301
180-19-000-00
32,00
118,20
82,3
027
,80
10,0
072
,30
M14250
M14502
180.1900000
M14250
M14503
M14250
M14503
B2
V05.2009050
ÔïìÝò|Sections
M14500 Deluxe Light
Alumil M14500 Deluxe Light
120.1041000
660.1226600660.1226600
620.
6900
70*
620.
6900
70*
1801425000
200.
0402
301
200.
0402
301
311.14503.. 311.14503..
140.1126000
B3
32,0
0
118,
20
82,3027,80
10,00 72,30
M14250
M14502
M14500 Deluxe Light
Alumil M14500 Deluxe LightV05.2009 051
ÔïìÝò|Sections
120.
1041
000
620.690070*
180.1900000
620.690070*
1801425000
290.
0000
...
200.0402301
200.0402301
140.1126000
M14250
M14250
M14503
M14503
82,30
90,50
32,0
0
72,0
0
B4
V05.2009052
ÔïìÝò|Sections
M14500 Deluxe Light
Alumil M14500 Deluxe Light
180.1425000180.1900000
620.690070*
620.690070*
180.1900000
140.
1126
000
290.
0000
...
290.
0000
...
311.14503..
311.14503..
200.0402301
200.0402301
200.0402301
200.0402301
140.
1126
000
M14250
M14250
M14503
M14503
82,30
90,50
32,0
0
72,0
0
B5
M14500 Deluxe Light
Alumil M14500 Deluxe LightV05.2009 053
ÔïìÝò|Sections
140.
1126
000
290.
0000
...
290.
0000
...
620.690070*
620.690070*
180.1900000
180.1900000
311.14503..
311.14503..
200.0402301
200.0402301
200.0402301
200.0402301
140.
1126
000
32,00 32,008,00
118,20
82,3
027
,80
10,0
072
,30
M14250
M14250
M14502
M14226
32,00
M9368
8,00
E1
V05.2009054
ÔïìÝò|Sections
M14500 Deluxe Light
Alumil M14500 Deluxe Light
180.1425000
290.0000...
600.0214500600.0214500600.0214500
660.00268000
180.1900000
660.1214000
660.0026800 620.
6900
70*
180.1900000
620.
6900
70*
250.06220..
200.
0402
301
200.
0402
301
140.1126000
32,00 32,008,00
118,20
82,3
027
,80
10,0
072
,30
M14250M14250
M14502
M14226
32,00
M9368
8,00
E2
M14500 Deluxe Light
Alumil M14500 Deluxe LightV05.2009 055
ÔïìÝò|Sections
250.06220..
1801425000
620.
6900
70*
620.
6900
70*
620.
6900
70*
180.1900000
620.
6900
70*
200.
0402
301
200.
0402
301
140.1126000
M14
502
M92
23
M90
10 M92
23
M14
226
M93
68
M14
250
35,0
082
,30
32,0032,00 8,00
118,20
32,008,00
E 3
250.
0622
0..
V05.2009056
ÔïìÝò|Sections
M14500 Deluxe Light
Alumil M14500 Deluxe Light
290.00002..
180.1425000
180.
1900
000 62
0.69
0070
*
620.
6900
70*
620.
6900
70*
620.
6900
70*
660.1226600660.1226600
200.
0402
301
200.
0402
301
140.1126000
M93
68
M14
250
M14
250
M14
250
M14
250
180.
1900
000
M93
68
82,3
017
,80
82,3
0
32,0032,00 8,00
118,20
M14
504
M14
250
M14
250M 1
4226
M14
226
32,008,00
E 4
M14
504
M14500 Deluxe Light
Alumil M14500 Deluxe LightV05.2009 057
ÔïìÝò|Sections
250.
0622
0..
290.0000...
311.14504.. 311.14504..311.14504..
1801
4250
00
240.8100001
180.
1900
000
620.
6900
70*
620.
6900
70*
620.
6900
70*
1801
4250
0014
0.11
2600
00
250.
0622
0..
290.0000...
200.
0402
301
200.
0402
301
240.8100001 240.8100001
200.
0402
301
200.
0402
301
140.
1126
000
32,0
032
,00
8,00
118,
20
82,3027,80
10,00 72,30
M14250
M14250
M14502
M14226
32,0
0
M9368
8,00
F1
V05.2009058
ÔïìÝò|Sections
M14500 Deluxe Light
Alumil M14500 Deluxe Light
180.1900000
620.690070*
620.690070*
620.690070*
620.690070*29
0.00
00...
1801425000
250.
0622
0..
200.0402301
200.0402301
140.1126000
M14500 Deluxe Light
Alumil M14500 Deluxe LightV05.2009 059
ÊïðÝò Cutting Analysis
R=Free
Y= H - 56 mm
ÐËÁÔÏÓ ÖÕËËÏÕWIDTH OF SASH
ÕØÏÓ ÖÕËËÏÕHEIGTH OF SASH
X= W + 18
mm ÐËÁÔÏÓ ÖÕËËÏÕWIDTH OF SASH
Y= H + 17 mm 1
ÕØÏÓ ÖÕËËÏÕHEIGTH OF SASH
2
X= A + 91 mm
2
X
W
Y H
A
W
X
M14250
M14501
M14250
M14250
M14503
M14250
M14501
600-02-104-00
M14250
M14501
M14250
M14501M12217
Y H1 H
V05.2009060
Κοπές|Cutting Analysis
M14500 Deluxe Light
Alumil M14500 Deluxe Light
AW
X4
Y H
W
600-02-104-00
M14250
M14501
M14250
M14501M12217
Y H1 H
M14250
M14501 M14250
M14250
M14503
ÐËÁÔÏÓ ÖÕËËÏÕWIDTH OF SASH
ÕØÏÓ ÖÕËËÏÕHEIGTH OF SASH
X= W + 75
mm ÐËÁÔÏÓ ÖÕËËÏÕWIDTH OF SASH
ÕØÏÓ ÖÕËËÏÕHEIGTH OF SASH
4
X= A + 147
mm 4
Y= H - 56 mm
Y= H + 17 mm 1
M14501
M14503
M14250
M14500 Deluxe Light
Alumil M14500 Deluxe LightV05.2009 061
Κοπές|Cutting Analysis
H1
H
M14
250
M14250
M14
501
M 9
368
M14
501
M14
250
M14
250
Y
M14
250
M92
23
M92
23
M14
504
M93
68
M14
250
M14
250
M14
250
M14
250
M14
504
M14
250
M14
250M
9223
M92
10
M92
23
M92
10
M 9
368
M92
10
ÕØÏ
Ó Ö
ÕËË
ÏÕ
HEI
GTH
OF
SA
SH
X=
W -
88m
m
ÐË
ÁÔÏ
Ó Ö
ÕËË
ÏÕ
WID
TH O
F S
AS
H
ÕØÏ
Ó Ö
ÕËË
ÏÕ
HEI
GTH
OF
SA
SH
2
Y= H
- 5
6 m
m
Y= H
+ 1
7 m
m
1
X 2
W
X 2
YH
X 2
V05.2009062
Κοπές|Cutting Analysis
M14500 Deluxe Light
Alumil M14500 Deluxe Light
M14250
M14502
M 14226
M14250
M14250
M14503
M14503
M14502
M14250
M14250
M14
250
M14502
M14226
ÐËÁÔÏÓ ÖÕËËÏÕWIDTH OF SASH
ÕØÏÓ ÖÕËËÏÕHEIGTH OF SASH
X= W + 18
mm ÐËÁÔÏÓ ÖÕËËÏÕWIDTH OF SASH
ÕØÏÓ ÖÕËËÏÕHEIGTH OF SASH
2
X= A + 91
mm 2
Y= H - 56 mm
Y= H + 17 mm 1
Y H1 H
A
W
X
X
Y H
W
M14500 Deluxe Light
Alumil M14500 Deluxe LightV05.2009 063
Κοπές|Cutting Analysis
X
W
M14250
M14250
M14503
M14503
M14250
M14250
M14503
M14503
M14250
M14502
W
A
M14502
X
ÐËÁÔÏÓ ÖÕËËÏÕWIDTH OF SASH
ÕØÏÓ ÖÕËËÏÕHEIGTH OF SASH
X= W + 93,00
mm ÐËÁÔÏÓ ÖÕËËÏÕWIDTH OF SASH
ÕØÏÓ ÖÕËËÏÕHEIGTH OF SASH
3
X= A + 165
mm 3
Y= H - 56 mm
Y= H + 17 mm 1
Y H 180-
19-0
00-0
0
M14250
M14502
600-02-104-00
M14250
M14503
600-02-104-00
M14250
M14503
180-19-000-00
M14250
M14502
M14250
M14503
M14250
M14503
H1 H
V05.2009064
Κοπές|Cutting Analysis
M14500 Deluxe Light
Alumil M14500 Deluxe Light
ÕØÏÓ ÖÕËËÏÕHEIGTH OF SASH
X= W - 63 mmÐËÁÔÏÓ ÖÕËËÏÕWIDTH OF SASH
ÕØÏÓ ÖÕËËÏÕHEIGTH OF SASH
X
Y H
W
M14250
M14502
M14250
M14502
M14226
M9368 H1 HY
Y= H - 56 mm
Y= H + 17 mm 1
M14250
M14250
M14502
M14226
M9368
M14502
M9223
M9010
M9223
M9010
W
X
M14500 Deluxe Light
Alumil M14500 Deluxe LightV05.2009 065
Κοπές|Cutting Analysis
ÕØÏ
Ó Ö
ÕËË
ÏÕ
HEI
GTH
OF
SA
SH
X=
W -
88,
00Ð
ËÁ
ÔÏÓ
ÖÕË
ËÏ
ÕW
IDTH
OF
SA
SH
ÕØÏ
Ó Ö
ÕËË
ÏÕ
HEI
GTH
OF
SA
SH
2m
m
YH
Y= H
- 5
6 m
m
Y= H
+ 1
7 m
m
1
M14
502
M14250
M14
502
M14226
M9368
H1
H
M92
23
M90
10
M93
68
M14
250
M14
250
M14
250
M14
250
M 1
4504
M14
250
M14
250
M14
226
M14
226
M14502
Y
XX
W
M14
254
V05.2009066
Κοπές|Cutting Analysis
M14500 Deluxe Light
Alumil M14500 Deluxe Light
M14250
M14
250
M14250
M 1
4502
Y
H1
H
M14
250
M14
503
M14
250
M14
503
M14
503
M14
250
M14
502
X
WA
M14
504
M14
503
M14
503
M14
250
M14
250
ÕØÏ
Ó Ö
ÕËË
ÏÕ
HEI
GTH
OF
SA
SH
ÐË
ÁÔÏ
Ó Ö
ÕËË
ÏÕ
WID
TH O
F S
AS
H
ÕØÏ
Ó Ö
ÕËË
ÏÕ
HEI
GTH
OF
SA
SH
Y= H
- 5
6 m
m
Y= H
+ 1
7 m
m
1
ÐË
ÁÔÏ
Ó Ö
ÕËË
ÏÕ
WID
TH O
F S
AS
H
X=
A +
296
6m
m
X=
W +
223
6m
m
YH
X
W
M14500 Deluxe Light
Alumil M14500 Deluxe LightV05.2009 067
Κοπές|Cutting Analysis
V05.2009068
Κοπές|Cutting Analysis
M14500 Deluxe Light
Alumil M14500 Deluxe Light
M14500 Deluxe Light
Alumil M14500 Deluxe LightV05.2009 069
ÅîáñôÞìáôá Accessories
R=Free
V05.2009070
Εξαρτήματα |Accessories
M14500 Deluxe Light
Alumil M14500 Deluxe Light
120 10 410 00
|Screw corner|Aluminum
Γωνία σύνδεσης βιδωτή
140 11 190 00
|Aluminum |Aluminum
|Spring cleat Γωνία σύνδεσης κουμπωτή140 11 260 00
|Spring cleat Γωνία σύνδεσης κουμπωτή
180 14 250 00
|Alignment corner
|Polyamide
Γωνία επιπεδότητας
Πολυαμίδιο
180 19 000 00
|Alignment corner
|Steel
Γωνία επιπεδότητας
Ατσάλι
600 01 201 00
|Aluminum
Ράυλο μονό για σίτα |Single wheel for fly-scr.
600 02 145 00
|Aluminum
Ράυλο διπλό |Double rollers
650 14 500 00
|Aluminum
Αμορτισέρ |Buffer for sliding doors
650 09 218 00
|Aluminum
Αμορτισέρ |Buffer for sliding doors
600 01 140 00
|Aluminum
Ράυλο μονό |Single roller
660 00 268 00
|Aluminum
Στόπερ φιλητού |Buffer
660 12 266 00
|Aluminum
Κεντρικό στεγανωτικό |Central seal
M14500 Deluxe Light
Alumil M14500 Deluxe LightV05.2009 071
Εξαρτήματα |Accessories
|Base for
|Aluminum
630 12 201 00
Âάóç ãëώóóáς ãéá êëåéäáñéά CLUB tongue
630 14 108 00
| TongueΓλώσσα κλέιδαριας Club
|InoxΑνοξειδωτο ατσάλη
630 20 108 00
| TongueΓλώσσα κλέιδαριας Club
|InoxΑνοξειδωτο ατσάλη
311 00 600 02 (λευκό)311 00 600 03 (μάυρο)
|End coverΤάπα ίσιου αγκίστρου
|PolyamideΠολυαμίδιο
|White|Black311 00 110 05 (καφέ)
Τάπα οβάλ |End cover
311 00 110 02 (λευκό)311 00 110 03 (μάυρο)311 00 110 04 (γκρι)
|PolyamideΠολυαμίδιο
|White|Black|Grey|Brown 311 14 503 03 (μάυρο)
|End coverΤάπα αγκίστρου
|PolyamideΠολυαμίδιο
|Black
311 12 217 00 (μάυρο)
|End coverΤάπα πρόσθετου κάσας
|PolyamideΠολυαμίδιο
|Black
311 14 219 02 (λευκό)311 14 219 03 (μάυρο)
|End cover for M14219Σύνδεσμος χωρίσματος σίτας για Μ14219
|PolyamideΠολυαμίδιο
|White|Black 311 14 254 03 (μάυρο)
Τάπα φιλητού για Μ14254
|PolyamideΠολυαμίδιο
|End cover for M14254
|Black
311 14 504 00 (μάυρο)
|End coverΤάπα φιλητού
|PolyamideΠολυαμίδιο
|Black 311 12 101 00
Ðëáóôéêό åðéêάëõøçς áíôéêñίóìáôïς|End cov.|PolyamideΠολυαμίδιο
630 12 202 00
Ìåôáöïñέáς êίíçóçς ãéá óðáíéïëέôá |Operator|PolyamideΠολυαμίδιο
620 03 406 03-No6 (μάυρο)620 03 406 04 -No6 (γκρι)620 03 407 03-No7(μάυρο)620 03 407 04-No7 (γκρι)
|Brush with membraneÂïõñôóάêé ìåìâñάíçς
|Black
|Black|Grey
|Grey
630 31 180 00
|Mechanism for
sliding doors|Aluminum
Ìçχáíéóìός óõñïìέíïõ
610 19 706 03 610 19 707 02 (λευκό)
(μάυρο)
Ëáâç ìéêñç åîùôåñéêç euris |Finger pull|PolyamideΠολυαμίδιο
V05.2009072
Εξαρτήματα |Accessories
M14500 Deluxe Light
Alumil M14500 Deluxe Light
610 46 630 02 (λευκό)610 46 630 03 (μάυρο)610 46 630 09 (ασημί)
|Εnd coverËáâή åîùô. êáðάêé euris
|Aluminum|Inline door locker for sliding doors
630 40 643 01 630 40 643 02 (λευκό)
(ασημί)
ÊëåéäáñéÜ
|Silver|White
440 40 641 00-600mm/15mm (ασημί)440 41 641 00-1600mm/15mm (ασημί)
|Mechanism IN LINEÌçχáíéóìός IN LINE |SteelΑτσάλι
|Silver|Silver
440 50 509 01 μονού σημείου|Mecha
nism IN LINE single pointÌçχáíéóìός IN LINE
|SteelΑτσάλι
|Aluminum
|Silver
|White|Black
610 19 638 02 (λευκό) 610 19 638 03 (μάυρο)610 19 638 11 (ασημί)
|Finger pull fix in×ούöôá êïõìðùôή απλή |Silver
|White|Black
|Aluminum
610 46 067 02 (λευκό)610 466 66 03 (μάυρο)610 46 601 09 (ασημί)
|Finger pull×ούöôá κίíçóçς|Aluminum
|Silver
|White|Black
|Black|White
415 07 229 11 416 07 229 03 (μάυρο)416 72 290 02 (λευκό)
(ασημί)
|Handle for windows×εñïύëé ìçχáíéóìïύ
|Aluminum
|Silver
|White|Black
290 00 002 00 / 2mm πράσινο290 00 003 00 / 3mm καφέ290 00 004 00 / 4mm μπορντό290 00 005 00 / 5mm μάυρο
|Glazing wedgeΤακάκι τζαμίου |PVCPVC
610 09639 00 (ασημί) 610 19 639 00 (μάυρο)610 96 390 00 (λευκό)
|Finger pull fix out×oύöôá êïõìðùôή απλή εξω
|Silver
|White|Black
|Aluminum
M14500 Deluxe Light
Alumil M14500 Deluxe LightV05.2009 073
Εξαρτήματα |Accessories
660 12 140 00
|Stainless steel driverÁíïîåίäùôïς ïäçãός|PolyamideΠολυαμίδιο
800 12 000 00
|Manual punch mashineΠρεσάκι χειρός
800 12 001 00
|Pneumatic punch mashineΠρεσάκι áέñïς
620 69 104 04-No4 (γκρι)620 69 105 03-No5 (μάυρο)620 69 105 04-No5 (γκρι)620 69 106 02-No6 (λευκό)620 69 106 03-No6 (μάυρο)620 69 106 04-No6 (γκρι)620 69 107 03-No7 (μάυρο)620 69 107 04-No7 (γκρι)620 69 108 02-No8 (λευκό)620 69 108 03-No8 (μάυρο)620 69 108 04-No8 (γκρι)620 69 100 02-No10(λευκό)620 69 100 03-No10(μάυρο)620 69 100 04-No10(γκρι) |Brush
620 69 112 03-No12(μάυρο)620 69 112 04-No12(γκρι)620 69 118 02-No18(λευκό)620 69 118 03-No18(μάυρο)620 69 118 04-No18(γκρι)Âïõñôóάêé απλό
|Black
|Black
|Grey
|Grey
|White
V05.2009074
Εξαρτήματα |Accessories
M14500 Deluxe Light
Alumil M14500 Deluxe Light
PVC
200 03 030 00 3mm (μάυρο)200 03 004 00 4mm (μάυρο)200 03 005 00 5mm (μάυρο)200 03 007 00 7mm (μάυρο)200 03 008 00 8mm (μάυρο)200 03 010 00 10mm(μάυρο)
|Wedge Gasket Λάστιχο σφήνα
|Black|Black|Black|Black|Black|Black
EPDM
200 04 023 01 / 2-4mm (μάυρο)200 04 045 01 / 4-6mm (μάυρο)200 04 067 01 / 6-8mm (μάυρο)
|Glazing Gasket Λάστιχο σφήνα
|Black|Black|Black
EPDM
250 06 220 32 (λευκό)250 06 220 33 (μάυρο)
|Gasket for fly-screen
Λάστιχο αντικωνουπικού |Black|White
|Glazing
EPDM
240 81 000 01 (μάυρο) |BlackΛάστιχο φούσκ φιλητούá
M14500 Deluxe Light
Alumil M14500 Deluxe LightV05.2009 075
Εξαρτήματα |Accessories