Post on 22-Jul-2020
® ®HideTech PRO SYSTEM FOR larcore HONEYCOMB PANELHanging pieces PRO-3 and PRO-4: hanger and bracket. Typologies.
Polígono Industrial de Bayas. C/ Ircio. Parcelas R72-77 - 09200 Miranda de Ebro, Burgos. SPAINTel.: +34 947 333 320 - Fax: +34 947 324 913 - info@alucoil.com - www.alucoil.com
JANUARY 2018
Grupo AlibéricoAlucoil
®
Grupo AlibéricoAlucoil
®
®
Alu
co
il D
OC
UM
EN
TS
® ® ®Alucoil HideTech PRO system is a non-visible fixing system for larcore panels. Hide fixing is achieved through single pieces (hangers and brackets), machined from the same extruded aluminium profile EN AW 6060 alloy.
ACCESSORIES:
(1)HideFix 64090
Ø6'4x9mm Alu/A2 special rivet for fixing ®PRO-4 and PRO-4R brackets to larcore
panel.
DIN 933 M5x12mm A2/50
Hex head screw for accurate height regulation of the panels. It will be placed into PRO-4R bracket metric thread.
DIN 7504-K Ø4'8x22mm A2/50
Self-drilling screw for dilation control installed in PRO-4R holes or slotted holes as appropriate.
(1) ®HideFix 64090 Alucoil rivet could only be used for ®larcore panels which total thickness is ≥ 14mm and
which aluminium skins thickness is ≥ 0'5mm.
HANGING PIECESDepending on their function and position, system´s hanging pieces are the following:
PRO-4: Standard bracket. Attached to the inner skin of the panel using 4 rivets, this piece would allow installation, of the panel, into the hangers.
PRO-4R: Regulation bracket. Attached to the inner skin of the panel using 4 rivets, this piece allows panel installation into the hangers, height regulation and dilations control.
PRO-3A: Long hanger. It is fixed to substructure profiles and links them to bracket pieces. This hanger would accommodate 2 brackets and will be placed in panel joints and central positions.
PRO-3B: Short hanger. It is fixed to substructure profiles and links them to bracket pieces. This hanger will be placed in simple positions where only one bracket is required.
PLACING OF PIECES
(x): Fixed point
(↔): Dilation point
PRO-4R
(↔) (x) (↔)(x)
PRO-4R PRO-4R PRO-4RPRO-4
PRO-3A
PRO-3B
PRO-3A
(x)
(↔)
(↔)
(↔) (↔)(x)(x)
61
22.4
250
250
22
.4
61
22.4
100
100
22
.4
thickness=3mm
PRO-4 PRO-4
PRO-3A
61 6
1
75
22
.4
Ø6.5
22.4
61 6
1
75
22
.4
75
Ø6.5
22.4
thickness=3mm
75
thickness=3mm