3M Adhesivos y Cinta
-
Upload
adhesipackage-sa-de-cv -
Category
Documents
-
view
235 -
download
0
description
Transcript of 3M Adhesivos y Cinta
3M™ Industrial Adhesives and Tapes
2
Table of Contents
3M™ Structural Adhesives 6-11
3M™ Scotch-Weld™ Epoxy, Acrylic, and Urethane Adhesives 6-7
Rite-Lok™ Cyanoacrylate Adhesives 8-9
Rite-Lok™ Anaerobic Adhesives 10-11
3M™ Adhesive and Tape classifications 4
Substrates and adhesion 5
3M™ Non-Structural Adhesives 12-16
3M™ Scotch-Weld™ Hot Melt Adhesives and Applicators 12
3M™ Scotch-Weld™ Contact Adhesives 13
3M™ Fastbond™ Contact Adhesives & Cylinder Spray Adhesives 13
3M™ Polyurethane and Hybrid Adhesives & Sealants 14
3M™ Aerosol Adhesives 15
3M™ Cleaners and Lubricants 16
3M™ Bonding Tapes 17-31
Tape Selection Guide 17-19
3M™ VHB™ Tapes 20-21
3M™ VHB™ Tapes for Signs 22
3M™ Double Coated Foam Tapes for Mounting 23
3M™ Double Coated Tapes 24-25
3M™ Removable/Repositionable Tapes 26
3M™ Adhesive Transfer Tapes 27-28
3M™ Extended Liner Tapes 29
3M™ Membrane Switch Adhesives 30
Scotch® ATG Adhesive Systems 31
Page 63M™ Structural Adhesives
Page 123M™ Non-Structural Adhesives
Page 173M™ Bonding Tapes
Page 323M™ Masking Solutions3M™ Masking Solutions 32-33
3M™ Masking Tapes 32
3M™ Duct Tapes and Cloth Tapes 33
3
For full products listing, please contact 3M.
Table of Contents
3M™ Surface Protection Solutions 41-43
3M™ Bumpon™ Protective Products – Molded Shapes, Polyurethane Rollstock 41
3M™ Clean-Walk Mats 42
3M™ Protective Tapes 42-43
3M™ Specialty Solutions 44-51
3M™ Specialty Tapes 44-45
3M™ Glass Cloth Tapes 46
3M™ Metal Foil Tapes 47
3M™ Polyester Tapes 48
3M™ Slick Surface Tapes 49
3M™ Vinyl and Polyethylene Tapes 50-51
3M™ Sound Damping Foils 51
Page 413M™ Surface Protection Solutions
Page 443M™ Specialty Solutions
Page 343M™ Packaging Solutions
Page 52Other TechnologiesOther Technologies 52-56
3M™ Performance Label Materials 52
3M™ Scotchmate™ and Dual-Lock™ Reclosable Fasteners 53-54
3M™ Flexographic Mounting Systems 55-56E-Series Tapes with Easy Mount AdhesiveEH-Series Adhesive to hold the edge on small diameter cylinders
3M™ Packaging Solutions 34-40
Scotch® and Tartan™ Box Sealing Tapes 34
Scotch® High Strength Tapes with Clean Removal 35
Scotch® High Strength Filament Tapes 36
Scotch® Manual Dispensers 37
3M-Matic™ Adjustable Case Sealers 38
3M™ Package Attachment and Label Protection Products 39
3M™ Padded Tape Products 39
3M™ ScotchPad™ Carry Handles 40
Numerical Product Index 57-58
4
3M™ Adhesive and Tape classifications – you really can’t say “glue” any moreAt one time, adhesive and glue were used synonymously. In industry today, however, designers and engineers are using terms like two-part low-odor acrylic, high bond tape, PUR systems, cyanoacrylate, and more. Glue is now considered to be something sticky which is no longer a characteristic of many adhesives.
3M adhesives can be classified in several ways.
Classify by form
3M adhesives are available as liquids, pastes, tapes, films, and shaped solids. Each has characteristics to be considered for application effectiveness and efficiency.
Liquids and pastes readily fill voids to enhance mechanical adhesion. Many liquids can be sprayed to cover large areas.
Films and pressure sensitive tapes offer advantages unique to their form:• Uniformthicknessthroughoutthejoint.• Confinementoftheadhesivetotheimmediatebondingarea.• Cleanbondingwithoutdrippingoroverflow.• Minimumadhesivewaste.• Die-cutintocomplexshapestofacilitatebondingofcomplexpartsor parts with narrow bonding surfaces.
Hot melts are supplied as solid sticks, cartridges, pellets, or similar shapes. Handling and storage is easy and neat.
Classify by strength
Another classification for industrial applications is by relative strength and solidification process. Generally, those adhesives that bond through a chemical reaction are stronger than those that bond through a physical change.
Structural adhesives bond by chemical reaction.
3M™ Structural Strength Adhesives bond the load-bearing parts of a product. As a rule of thumb, structural strength adhesives reach a minimum of 1,000 psi overlap shear strength. 3M formulations include the following:
• Epoxyadhesivesareavailableinoneandtwo-partliquidsandpstes. Of all 3M adhesives, these provide the highest strength and elevated temperature resistance.
• Acrylicadhesivesaretwo-partliquidsandpastestobondthewidest variety of substrates including hard-to-bond plastics and oily metals. The distinction is high strength bonding without the surface preparation needed for epoxies and urethanes.
•Urethaneadhesivesaregenerallylowercosttwo-partliquidsand pastes that cure quickly to an elastic bond in applications requiring flexibilitybetweendissimilarmaterials.Impactresistanceisa distinctive characteristic.
• Cyanoacrylateadhesivesarehighstrengthliquidformulationsknown as instant adhesives. On rigid plastic, glass, metal, rubber, and other low porosity substrates, they harden in seconds through reaction with surface moisture.
•Anaerobicadhesivesareliquidsthatcuretoatoughplasticinthe absence of oxygen and in the presence of metal. Typical applications include threadlocking, retaining, gasketing, and sealing.
Non-structural adhesives bond with a physical change.
Non-structural adhesives vary in strength from repositionable to strength equal to or greater than the strength of the substrate being bonded. These adhesives are typically less than 1000 psi and bond materials in cushions, gaskets, insulation, veneers, and general assembly. 3M formulations include the following:
• Hotmeltadhesivesmeltandflowunderheattowetthesubstrates and make bonds quickly upon cooling. Products are available with a variety of characteristics such as short set times, sprayable formulas, and permanent PSA properties. Applications range from sealing to bonding automotive interior trim.
• Rubberadhesivesaresolvent-basedorwater-basedandsolidify through evaporation of the carrier. Products are designed for adhesion to various substrates, application methods, and environmental resistance of the bonded product.
• Contactbondadhesivesareusuallyrolled,brushed,orsprayed on the two surfaces to be mated and permitted to become dry to the touch with a variety of open times. When the surfaces are pressed together, near ultimate bond strength is achieved.
Pressure sensitive adhesives
Pressure sensitive adhesives (PSAs) found in 3M tapes grip immediately to mating surfaces. With dwell time, the adhesive conforms to surface irregularities.
3M hybrid classifications
• Curinghotmelts(PolyurethaneReactive[PUR]adhesives)are moisture-curing urethanes that apply like a hot melt adhesive but cool to bond strength usually associated with two-part structural adhesives.
• Reclosablefastenerscombineadhesiveandmechanicalfastening principles. Pressure sensitive adhesive permanently bonds two reclosable mating strips to the substrates that need to be opened and closed multiple times.
3M™ Adhesive and Tape classifications
5
Substrates and adhesion
Substrates and adhesion – a surface phenomenon, so know surfaces wellAdhesives attach to the surfaces of two substrates, unlike a process that fuses substrates into a unified whole such as welding metal or solvent activation of plastics. In selecting a 3M adhesive or tape, surface condition must be considered: roughness, smoothness, porosity, coated, uncoated,cleanliness,flexibility,sizeofthepart,andsurfaceenergyofthe part.
Adhesivepaste,forexample,flowsreadilyintoaroughsurfaceforimproved effective adhesion. Flexible materials such as paper or thin gauge metal can be bonded with a thin adhesive transfer tape. Large rigid parts with smooth clean surfaces can be bonded with a variety of 3M products ranging from double coated foam tapes to two-part structuraladhesives.Someplasticshaveplasticizerswhichmigratetothesurfaceanddegradethebondovertime,soaplasticizer-resistantadhesive or tape is essential. If the substrate has been powder coat painted, the coating is the bonding surface rather than the substrate, and you would want to consider a 3M tape or adhesive developed specifically for that surface.
Surface energy ranges from high to low. To illustrate the concept of surface
energy, think of water on the unwaxed hood of a car. The unwaxed hood hashighsurfaceenergyandwateronthehoodflowsintopuddles.Incomparison, a waxed hood has low surface energy and the water beads up ratherthanflowsout.Similartowater,adhesiveonahighsurfaceenergysurfaceflowsand“wetsout”thesurface.“Wettingout”isrequiredtoforma strong bond.
As a rule of thumb, the higher the surface energy, the greater the strength of adhesion.
Specially formulated adhesives are available for low surface energy surfaces. The following illustrations and surface rankings give you an idea of relative surface energy.
Regardless of surface energy, the substrate must be unified, dry, and clean tomaximizeadhesivecontact.
Metal Surfaces(High Surface Energy)
High Surface EnergyPlastics (HSE)
Low Surface EnergyPlastics (LSE)
mJ/m2 Surfaces50 Kapton® Industrial Film47 Phenolic46 Nylon45 Alkyd Enamel43 Polyester43 Epoxy Paint43 Polyurethane Paint42 ABS42 Polycarbonate39 PVC Rigid38 Noryl® Resin38 Acrylic
mJ/m2 Surfaces1103 Copper840 Aluminum753 Zinc526 Tin458 Lead700-1100 Stainless Steel250-500 Glass
mJ/m2 Surfaces37 PVA36 Polystyrene36 Acetal33 EVA31 Polyethylene29 Polypropylene28 Polyvinyl
Fluoride Film18 PTFE Fluoropolymer
4 5 6
Note: These values are provided as a guide. Formulation modifications can substantially alter surface energies.
6
3M™ Structural Adhesives
3M™ Scotch-Weld™ Epoxy, Acrylic, and Urethane Adhesives
Load-bearing formulations for metals, rubber, glass and more
As an alternative to mechanical or fusion fastening, the reasons for 3M™ Scotch-Weld™ Epoxy, Acrylic and Urethane Adhesives are many: greater design latitude, cleaner lines, material substitution, less machining, lighter weight, more durability, and often less cost.
To meet application and end-use requirements, there are formulations for bonding steel, aluminum, copper, low surface energy plastics, rubber, glass, wood, masonry and more. Depending on adhesive, select from duo-pak cartridges, cans, tubes, pails, and drums.
Whatever properties you need – durable adhesion,flexibility,creepresistance,heatandenvironmental resistance, or void-filling – you’ll likely find a 3M™ Scotch-Weld™ Structural Adhesive to meet your requirements and expectations
With no surface preparation, 3M™ Scotch-Weld™ Structural Acrylic Adhesive DP8005 bonds the mitered corners of a simulated-wood composite plastic P.O.P. display, eliminating nails that would compromise appearance.
3M™ Scotch-Weld™ Epoxy Adhesive DP420 bonds steel couplings into aluminum tubing of a bicycle frame. Couplings are threaded
With a 400ml cartridge, the 3M™ EPX™ Pneumatic Applicator applies 3M™ Scotch-Weld™ Epoxy Adhesive DP420 to bond ABS components of an automotive breather valve. The toughened epoxy at the inlet port seals in the high pressure and air/fuel mixture.
3M™ Scotch-Weld™ Structural Adhesive EC2216 bonds honeycomb to aluminum for common applications in aerospace and transportation.
3M™ Scotch-Weld™ Epoxy Adhesive 2214 bonds and seals refrigerant coils with overlap shear strength of 4500 psi. One part eliminates metering and mixing
3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810 requires minimal surface preparation for bonding metal hinges into awning frames. Reaches handling strength in only 10 minutes.
7
3M™ Structural Adhesives
Product Information:Ep
oxy
Acry
lic
DP100 (Clear)
DP100 Plus (Clear)
DP100NS (Translucent)
DP100FR (White)
DP105 (Clear)
DP110 (Gray)
DP110 (Translucent)
DP125 (Gray)
DP125 (Translucent)
DP190 (Gray)
DP190 (Translucent)
DP270 (Black, Clear)
DP405(Black)
DP405LH(Off-white)
DP420LH(Off-white)
DP420 (Off-White)
DP420 (Black)
DP420NS (Black)
DP460 (Off-White)
DP460NS (Off-White)
DP920(Light tan)
EC2216* (Gray)
DP805 (Lt. Yellow)
DP807 (Lt. Yellow)
DP810 (Tan, Black)
DP8010NS (Off-White)
DP812(Lt. Yellow)
DP810NS(Tan)
DP820*(Lt. Yellow)
DP825 (Lt. Yellowto Lt. Amber)
DP8005(Off-White, Black)
DP8010(Off-White)
General PurposeRigid bonds
VeryflexibleColorless
General PurposeNon-sag
Flame RetardantUL94 V-0 rating
VeryflexibleColorless
General PurposeFlexible bonds
General PurposeFlexible bonds
High PerformanceVeryflexiblebonds
High PerformanceVeryflexiblebonds
High PerformanceFlexible bonds
High PerformanceFlexible bonds
Rigid potting compoundNon-corrosive
Short work life andfast cure
Low halogen version ofDP405
Low halogen version ofDP420
Tough durable bondsHigh impact resistance
Tough durable bondsHigh impact resistance
Tough durable bondsNon-sag
Tough durable bondsHigh impact resistance
Tough durable bondsNon-sag
Medium work life Bonds oily metal
High PerformanceVeryflexiblebonds
Fast strength build-upMinimal surface prep
Fast strength build-upMinimal surface prep
Tough durable bondsHigh impact resistance
Bonds polyolefins and lowsurface energy materials
Fast strength build-upMinimal surface prep
Tough durable bondsNon-sag
Medium work life Minimal surface prep
Medium work life Minimal surface prep
Bonds polyolefins and lowsurface energy materials
Bonds polyolefins and lowsurface energy materials
1:1
1:1
1:1
1:1
1:1
1:1
1:1
1:1
1:1
1:1
1:1
1.1
2:1
2:1
2:1
2:1
2:1
2:1
2:1
2:1
2.1
2:3
1.1
1.1
1.1
10.1
1.1
1.1
1.1
1.1
10.1
10.1
13,000
8,500
95,000
80,000
6,500
55,000
50,000
52,500
15,000
80,000
10,000
12,000
14,000
14,000
30,000
30,000
30,000
180,000
30,000
125,000
10,000
80,000
110,000
50,000
20,000
65,000
50,000
95,000
55,000
50,000
25,000
20,000
5 minutes
4 minutes
5 minutes
6 minutes
5 minutes
8 minutes
25 minutes
25 minutes
25 minutes
90 minutes
80 minutes
60 minutes
4 minutes
4 minutes
20 minutes
20 minutes
20 minutes
20 minutes
60 minutes
60 minutes
20 minutes
90 minutes
3 minutes
5 minutes
10 minutes
10 minutes
10 minutes
10 minutes
15 minutes
25 minutes
3 minutes
10 minutes
20 minutes
20 minutes
20 minutes
20 minutes
20 minutes
8 minutes
20 minutes
2.5 hours
2.5 hours
10 hours
6 hours
3 hours
10 minutes
10 minutes
2 hours
2 hours
2 hours
2 hours
4 hours
4 hours
3 hours
10 hours
10 minutes
10 minutes
20 minutes
2 hours
20 minutes
20 minutes
40 minutes
40 minutes
3 hours
2 hours
2
10
2
2
35
20
20
35
35
20
20
2
21
21
50
50
50
50
60
60
20
25
35
20
20
20
20
20
20
20
20
20
900 1,500 300
3,000 3,500 200
900 1,500 300
1,250 2,200 800
3,500 2,000 150
2,700 3,500 250
2,500 2,500 200
3,400 4,300 400
4,000 2,500 150
1,500 2,500 400
3,500 1,200 150
1,200 2,500 300
3,500 5,300 1,890
3,500 5,300 1,890
4,500 4,500 450
4,500 4,500 450
4,500 4,500 1,250
4,500 4,500 1,250
4,500 4,500 700
4,900 4,650 1,350
4,270 4,440 1,260
3,000 3,200 400
2,500 3,500 2,200
- 2,500 -
1,200 3,500 2,200
- 2,400 400
- 2,500 -
1,200 3,500 2,200
2,500 3,500 2,200
2,500 3,500 2,200
2,500 3,500 2,200
2,500 3,500 2,200
Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.*Available in Duo-Pak Cartridges only.
Product(Color)
Key Features Mix Ratio(Volume)
B:A
ApproximateViscosity
75°F (24°C)(cps)
ApproximateMixed Worklifeat 75°F (24°C)
ApproximateTime to Handling
Strength at 75°F (24°C)
AverageT-Peel at
75°F (24°C)(piw) -67°F 75°F 180°F
(-55°C) (24°C) (82°C)
Overlap Shear (psi)
8
To speed production and reliably assemble plastic and rubber, super fast curing Rite-Lok™ Cyanoacrylate Adhesives reach handling strength in 3-30 seconds. Also bond EPDM and other hard-to-bond substrates with confidence.
For coil termination, high temperature Rite-Lok™ Cyanoacrylate Adhesive HT700 resists continuous temperature up to 223°F (106°C) and intermittent exposure as high as 250°F (121°C).
For visual appeal, Rite-Lok™ Cyanoacrylate Adhesive LO100 is a low blooming formulation that bonds the plastic riser into a lipstick casing without chlorosis (white residue at the joint). Low odor reduces the need for sophisticated ventilation equipment.
With more than 30 Rite-Lok™ Cyanoacrylate Adhesives, you have choices for application success with surfaces that are dissimilar, porous, non-porous, rough, smooth, oily, clean, low surface energy, high energy, and more.
Consider one of the engineered grade Rite-Lok™ Cyanoacrylate Adhesives for productivity and performance in bonding difficult-to-bond plastics and rubbers to themselves or in combination with metals or composites.
Withauniquepolymer,rubber-toughenedRite-Lok™CyanoacrylateAdhesivescuretoaflexiblebondlinebetweendissimilarmaterialstomaximizeresistancetoimpact,peel,andthermalrecycling.Chooselowviscosityforclose-fittingpartsorhighviscosity for gap filling.
3M™ Structural Adhesives
Rite-Lok™ Cyanoacrylate AdhesivesChoices for instant performanceand productivity...flexible bond line, low bloom, low odor, more
Known as instant adhesives, Rite-Lok™Cyanoacrylate Adhesives offer more than arange of seconds-fast bonding for substratesranging from metal to plastic, wood torubber. These liquid and gel formulationsgive you a wide selection of other propertiesto help improve production and end use:
• Superfastcuring• Lowodor• Lowblooming• Hightemperatureresistance• Rubber-toughenedforimpactresistance• Flexibletoresistvibration• Engineeredgradeforhard-to-bondplastics and rubbers• Optimizedmetalbonding• Bondinginsensitivesurfaces• Gapfilling
9
3M™ Structural Adhesives
Product Information:
Full Cure (hours)
24
24
24
24
24
24
24
24
24
Product
SF100
LO100
PR851
PR54
EC100
SB95
SI1500
PR10
HT700
Typical Use
Fast cure, high strength with EPDM and other elastomers
Low-medium viscosity for fitting parts fitting parts
Medium viscosity with some gap filling
Fast cure, gel viscosity for max gap filling
General purpose, fast curing
Low viscosity for close fitting parts
High viscosity for gap filling
High viscosity for gap filling
Medium viscosity with some gap filling
Color
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Black
Clear
Markets
Automotive, appliance, leather working, hand tools, electronics, power tools
Cosmetic cases, appearance-critical applications, black substrates, close-up bonding
Automotive, appliance, hand tools, electronics, power tools
Automotive, appliance, electronics, hand tools, power tools
Automotive, general bonding, consumerproducts, toys, rubber/plastic assembly
Woodworking, luggage and fabric, hobby, costume jewelry, leather
Woodworking, luggage and fabric, hobby, costume jewelry, leather
Automotive, appliance, electric motors, hand tools, electronics, power tools
Appliance, electronics, electric motors,automotive, transformers
Chemical Typical
Ethyl Hybrid
Methoxyethyl
Ethyl Hybrid
Ethyl Hybrid
Ethyl
Ethyl Hybrid
Ethyl Hybrid
Ethyl Hybrid
Ethyl Hybrid
Type Viscosity (cps)
100
100
300
Gel
100
40
1500
3500
700
Temperature Range
-65° to 180°F(-54° to 82°C)
-65° to 160°F(-54° to 71°C)
-65° to 160°F(-54° to 71°C)
-65° to 180°F(-54° to 82°C)
-65° to 180°F(-54° to 82°C)
-65° to 180°F(-54° to 82°C)
-65° to 180°F(-54° to 82°C)
Continuous -65° to 200°F(-54° to 93°C)Intermittent-65° to 225°F(-54° to 107°C)
Continuous-65° to 223°F(-54° to 106°C)Intermittent-65° to 250°F(-54° to 121°C)
Time to Handling
3-30 sec.
10-60 sec.
10-35 sec.
3-60 sec.
10-40 sec.
2-20 sec.
5-60 sec.
20-90 sec.
15-40 sec.
Super Fast Cyanoacrylate Adhesives
Low Odor Cyanoacrylate Adhesives
Flexible Cyanoacrylate Adhesives
Engineered Grade Cyanoacrylate Adhesives
Surface Insensitive Cyanoacrylate Adhesives
General Purpose Cyanoacrylate Adhesives
Cyanoacrylate Primers, Activators, and Debonders
Rubber-Toughened Cyanoacrylate Adhesives
High Temperature Cyanoacrylate Adhesives
Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.
Cyanoacrylate accelerator with isopropyl alcohol formulation for insensitive plastics, cosmetically critical bond lines, and medical applications.
Cyanoacrylate debonder for cleanup.
Cyanoacrylate polyolefin primer for very fast bonding of difficult-to-bond polyethylene and polypropylene.
Adhesion promoter for use with silicone, Santoprene®, Viton® and EPDM.
California compliant version of AC78 (acetone based).
Cyanoacrylate general purpose accelerator will not attack plastics.
Cyanoacrylateacetone-basedacceleratorflashesoffrapidly;excellentadhesion;overspraymayattacksomeplastics.
AC12
AC68
AC77
AC78
AC79
AC113
AC452
10
Rite-Lok™ Threadlockers fill and seal threads completely to help stop corrosion, rust, and leaks. Securely hold even dissimilar metals.
Rite-Lok™ Retaining Compounds readily tighten tolerances in worn bearing seats, keyways, splines, tapers, shims, gears, and shafts. Fill voids completely to seal out moisture.
Rite-Lok™ Gasket Makers eliminate pre-cut or compression gaskets, or hold pre-cut gaskets in place during production. Seal without shimming effect or creeping.
Withafastandeasysqueeze,Rite-Lok™PipeSealantseliminate the cost and problems of shredding tapes, O-rings, and other mechanical sealants.
Tosavethecostofleakingfluidorgas,Rite-Lok™PipeSealants cure quickly to a tight, continuous seal without the creep and shrinkage of pastes.
Rite-Lok™ Threadlockers on threaded metal fasteners help keep production equipment up and running. You save the cost and time of disruptive, unscheduled downtime due to nuts, bolts, and screws that vibrate loose in such areas as gear housings and motor mounts.
3M™ Structural Adhesives
Rite-Lok™ Anaerobic AdhesivesThe easy choice for running a tight operation
When you need secure tight fits and seals to keep production up and running, Rite-Lok™Anaerobic Adhesives offer a wide selection of properties to help you save the time and cost of disruptive, unscheduled downtime due to leaks and loose fasteners.
For threadlocking, sealing, retaining, and gasketing, application is fast and easy with justatargetedsqueezeofabottleortube.Inthe absence of oxygen and in the presence of metal, the anaerobic formulation cures quickly to a tough plastic that fills, seals, and secures.
Rite-Lok™ Threadlockers weld fasteners in place for blind holes and thru holes and prevent loosening from vibration.
Rite-Lok™ Pipe Sealants seal instantly to stop leaks when applied to the threads or compression fittings of most metal or certainplastic pipes.
Rite-Lok™ Retaining Compounds bond andseal non-threaded cylindrical assemblies.
Rite-Lok™ Gasket Makers fill voids between metalflangesandcuretoatight,rigidorflexibleseal.
11
Seal to OperatingPressure (hours)
Pipe Sealant Anaerobic Adhesives
PS65
PS67
Product
Product
Product
Typical Use
Typical Use
Typical Use
Cured State
Full Cured(hours)
Note: The technical information and data should be considered representative only and should not be used for specification purposes.1 Hand tool for removal 2 Heat and hand tool for removal
3M™ Structural Adhesives
Product
Product
TL22
TL42
TL43
TL62
TL71
TL72
TL77
TL90
GM15
RT40
AC471
AC649
3989
Typical Use
Typical Use
Screwlock – Low removal torque for small fasteners less than a 1/4” (6mm) (HTR1)
Nutlock – Medium strength, general purpose (HTR1)
Oil tolerant, medium strength general purpose (HTR1)
Studlock – High strength with controlled torque tension (HHR2)
Permanent studlock for bolts and studs up to 1” (25mm) (HHR2)
High temperature studlock with gap filling for larger diameter coarse threaded parts (HHR2)
Heavy duty permanent for fasteners up to 1.5” (38mm) with coarse threads (HHR2)
Penetrating adhesive for pre-assembled fasteners and porosity sealing of welds (HHR2)
General purpose for applications requiring easy disassembly
Fast curing paste sealant for inactive surfaces such as stainless steel
White
Generalpurpose;flexibletowithstandvibration
Securesalltypesandsizesofbearings,shaftsandcylindrical parts
Fast-actingsurfacecleanerandprimerforusewithallanaerobicadhesives;sevendaypartlifeforpre-application
Acetone-basedgreenprimerforinactiveorverycoldsurfaces;30daypartlifeforpre-application
3M™Scotch-Weld™AnaerobicActivatortoacceleratecuring;drytime30-60seconds;solvent-based(flammableacetone)
Color
Color
Color
Color
Purple
Blue
Red
Green
Purple
Green
Size
Size
Size
Size
Size
50 ml tube250 ml tube
50, 250 ml btl.1 liter pipette
50, 250 ml btl.
50, 250 ml btl.1, 14 liter btl.
50, 250 ml btl.1, 14 liter btl.
50, 250 ml btl.1 liter btl.
50, 250 ml btl.1, 14 liter btl.
50, 250 ml btl.1 liter btl.
50 ml tube250 ml tube
50 ml tube250 ml tube
50 ml tube250 ml tube
2fl.oz./1gal.btl.
2,8fl.oz./1gal.btl.
4.5fl.oz.
Type Viscosity (cps)
Type Viscosity (cps)
Type Viscosity (cps)
Type Viscosity (cps)
1200
1200
3300
1600
500
7000
7000
20
Paste NA 4
Paste
600
Temperature Range
Temperature Range
Temperature Range
Temperature Range
Full Cured (hours)
-65° to 300°F(-54° to 149°C)
-65° to 450°F(-54° to 232°C)
-65° to 300°F(-54° to 149°C)
-65° to 300°F(-54° to 149°C)
-65° to 300°F(-54° to 149°C)
-65° to 400°F(-54° to 204°C)
-65° to 300°F(-54° to 149°C)
-65° to 400°F(-54° to 204°C)
24
Flexible
Flexible
Time toHanding
Time toHanding
Time toHanding
Time toHanding
<20 Min.
<60 Min.
<20 Min.
1-2 hours(15 min. - 2 hrs)
10 -15 min.
Threadlocker Anaerobic Adhesives
Gasket Maker Anaerobic Adhesives
Product Information:
Retaining Compound Anaerobic Adhesives
Anaerobic Adhesives Primers
12
For bonding the guide to a drawer bottom, 3M™ Scotch-Weld™ Hot Melt Adhesive 3738 provides high delivery rate and long bonding range to meet production requirements.
For versatility in P.O.P. assembly, 3M™ Scotch-Weld™ Hot Melt Adhesives bond a variety of plastics, woods, and light gauge metals.
For economical package sealing, 3M™ Scotch-Weld™ Hot Melt Adhesive 3762 is a versatile formulation with 35-second bonding range for production speed. Variety of tips for package types.
3M™ Non-Structural Adhesives
3M™ Scotch-Weld™ Hot Melt Applicator LT with 3M low temperature (265°F/129°C) adhesive effectively bonds heat-sensitive substrates such as styrene foam to itself, corrugated, or other surfaces without damaging the foam.
3M™ Scotch-Weld™ Hot Melt Adhesives and Applicators
Other Non-Structural Adhesives include
The 3M systems approach tohelp you improve productivityand lower costs
3M™ Scotch-Weld™ Hot Melt Adhesives and Applicators are advanced hand-held systems to help you improve productivity, lower cost, and minimizewaste.
Adhesives are 100% solids thermoplastic resins thatbecomefluidwhenheatedandquicklywetthe bonding surface. They cool, harden, and reach bond strength in seconds. You can move assemblies immediately to keep production flowing.Thishelpseliminateclamps,fixturingand drying, and saves time, energy and space.
Each adhesive is designed and preciselymanufactured for efficient use in one of the portable 3M™ Scotch-Weld™ Hot Melt Applicators. Bond wood, plastic, foam, fabric, cardboard, and more.
• 3M™ Scotch-Weld™ Plastic Adhesives
• 3M™ Scotch-Weld™ Rubber and Gasket Adhesives
• 3M™ Insulation and Light-Duty Adhesives
13
3M™ Scotch-Weld™ Contact Adhesives
3M™ Fastbond™ Contact Adhesives & Cylinder Spray Adhesives
3M™ Non-Structural Adhesives
3M™ Adhesives that are GREENGUARD™ Certified
3M’s commitment to the green movement extends far beyond GREENGUARD Certified adhesives. Our line of high-performance green products also includes a variety of high solids/low-VOC adhesives. So whatever your application, 3M has an adhesive that can help you meet your green goals and make long termeconomic sense.
GREENGUARD™ Certified includes
• 3M™Scotch-Weld™CylinderSpray Adhesive 94CA – conveniently packaged, low-VOC, solvent-based contact adhesive for laminating
• 3M™Fastbond™PressureSensitive Adhesive 4224NF – pressure sensitive water-based adhesive for foam, fabric and carpeting
• 3M™Fastbond™ContactAdhesive 30NF/30H – the industry standard in water-based contact adhesives
• 3M™Fastbond™FoamAdhesive100– fast-setting water-based adhesive for foam bonding
• 3M™Fastbond™InsulationAdhesive 49 – fast-setting, pressure-sensitive water-based adhesive for lightweight bonding
• 3M™Fastbond™ContactAdhesive 2000NF – immediate-bonding waterbased contact adhesive for laminating
Fastbond is the 3M trademark on a continually growing line of water-based adhesives. For example, 3M™ Fastbond™ Foam Adhesive 100 is a one-part, water-dispersed formulation for bonding many porous substrates to porous or non-porous substrates with minimal dry time.
For HPL countertop assembly, 3M™ Scotch-Weld™ Cylinder Spray Adhesive 94 CA dries quickly to reach postformable strength in 1-5 minutes. 1-15 minute open time providesflexibilityinassemblyspeed.Formulatedspecificallywithlowtelegraphingfor thin veneers and glossy laminates.
3M™ Fastbond™ Contact Adhesive30NF in pourable quart andone gallon plastic containers,5-gallon pail, and 52-gallon drum
Product Description SolidsWeight
(Approx.)
ConsistencyFlashPoint
(ClosedCup)
ColorDry Film
ApplicationMethod
BondingRange
Thinliquid
Thinliquid
30 minutesmaximum
30 minutesmaximum
•Rapidbuildup to a very high strength bond for metal •Resistsheat and continuous •Meets MIL-A-21366A, MMM-A-121
•Lowersolids, lower viscosity version of 1357 for automatic spray
1357
1357L
Brush,Spray
Spray
Gray- green, Light
Yellow
Gray- green
25%
18%
5361
5361
1991
1991
422
422
-14°F(-26°C)
-14°F
(-26°C)
Overlap ShearStrength (PSI)
Peel Strength (PIW)
75°F(24°C)
180°F(82°C)
75°F(24°C)
Product Information:
1 Birch plywood to birch plywood @ 0.1 inches/minute separation rate.2 Canvas to cold rolled steel @ 2.0 inches/minute separation rate.3M™ Hi-Strength 90 Bulk Adhesive is available in 5-gallon and 55-gallon containers. See page 43 for features and details.
Contact Adhesives
14
3M™ Polyurethane and Hybrid Adhesives & SealantsThe Power Line – Alternatives for bonding, filling, sealing, waterproofing and more
3M™ Polyurethane and Hybrid Adhesives & Sealants are advanced, one-part formulations that require no mixing or special application tools. 3M’s POWER Line products cure with atmospheric moisture to form durable, resilient, long-lasting bonds ideal for:
• Truck,trailer,busandothervehiclepanel mounting
• MarineOEMdeck-to-hulljoining,through-hull fastening, deck fitting and more
• Roofflashings,through-wallpipeandcable sealing and other construction applications
• Concretesealingandexpansionjointfilling
• Marineandspecialtyvehiclewindowbonding andglazing
• Manyotherapplicationsinawiderangeof industries
Fromtrailerrooftofloor,polyurethane3M™Scotch-Seal™AdhesiveSealant560moisturecuresrapidlytoaflexibleseal/bondbetweenexteriorskinsandmetalframework,andwoodflooringandframework.Tensilestrengthofupto580psiisenoughtoreplace mechanical fasteners in many situations.
3M™ Marine Adhesive Sealant 5200 Fast Cure cures completelyinonly24hourstoastrongflexiblesealforapplications above or below the waterline such as hull and stern joints, hull to deck seams, marine hardware and more.
3M™ 4000UVHybrid AdhesiveSealant Fast Cure•Veryhighstrength•ExcellentUV resistance for glazingapplications•Above/below waterline use•LowVOC•20-minuteskintime
3M™ 525 PolyurethaneConstruction Sealant
•Excellentforconcretesealing•Extremelypliableandflexible•90+minuteskintime
3M™ 535 PolyurethaneConstruction Sealant
•Excellentsealerfor concreteandflashing•Paintable•90-minuteskintime
3M™ 540 PolyurethaneSealant
•Excellentcosmeticsealer•Paintable•Smokeandflamerated•90-minuteskintime
3M™ 550 PolyurethaneAdhesive Sealant Fast Cure
•Multi-purposeadhesivesealant•Paintable•Above/belowwaterlineuse•60-minuteskintime
3M™ 551 PolyurethaneAdhesive Sealant
•Multi-purpose adhesive sealant•Mediumstrength•2-3hourskintime
3M™ 560 PolyurethaneAdhesive Sealant
•Panel-bonding adhesive•Veryhighstrength•Smokeandflame rated•50-minuteskintime
3M™ 5010 PolyurethaneMulti-Purpose Adhesive
•Minorgapfilling•Versatile,fast- grabbing, high strength adhesive•Excellentwater resistance•3-minuteskintime
3M™ 5200PolyurethaneAdhesive Sealant•Veryhighstrength•Watertightbonds•Above/below waterline use•48-hourskintime
3M™ 590 OEMPolyurethane GlassAdhesive Sealant•Structuralglass bonding•Crashtested (FMVSS 212)•3-hourdrive- away time•30-minuteskintime
3M™ 740Hybrid Sealant
•Excellentcosmetic sealant•ExcellentUV resistance•LowVOC•50-minuteskintime
3M™ 760 HybridAdhesive Sealant
•Excellentadhesion•Paintablewhenwet•Above/below waterline use•LowVOC•30-minuteskintime
3M™ Non-Structural Adhesives
15
3M™ Non-Structural Adhesives
At the touch of a finger – bonding power for substrates from paper to metal.
3M aerosol adhesives go to the job and arealways ready when needed. Only a finger’stouch puts a job-matched formulation to work on paper, plastic, cardboard, foam, metal, and more. With fast tack, long bonding range, and little or no soak-in,
3M™ Super 77™ Multipurpose Spray Adhesive is a versatile tool for bonding lightweight materials that include fabrics, plastics, soft foams, paper, cardboard, and thin gauge metals.
3M™ Hi-Strength 90 Spray Adhesive typically bonds edge banding in 60 seconds compared to 15-20 minutes for many typical bulk contact adhesives. Strength increases to an ultimate 230 psi in shear and 25 piw in peel.
3M™FoamFast74SprayAdhesivequicklybondsflexibleurethane or latex foams to themselves and many other materials. Bond reaches foam-tearing strength with a soft,non-dimpling bond line.
Product Features NetWeight(Oz.-
Grams)
PeelStrength3
(PIW)
OverlapShear
Strength2
(PSI)
HeatResistance
in °F2
CACompliant5
Sq. Ft.Coverage @ 1 gram dry
wt/sq.ft (per can)1
%Solids
SprayPattern
OneSurface
TwoSurface
Bonding Range
15.1
22
9.4
13.5
25
19.1
12.9
13
18
74
106
27
70
119
97
70
65
76
11
9
4
10
5
7
16
13
25
170
180
110
230
150
190
300
250
240
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
•Repositionablewithaggressivetack•Bondpolyethylenefilm,foamandcarpet•Blue•Fasttackwithfoam-tearingstrength•Softnon-dimplingglueline•ClearorOrange•“Tape-like”PSAbonds•Nobleeding,stainingorwrinkling•Clear•Multi-purposewithhightemperatureresistance•Strongone-surfacebonds•Clear•Highcoverage,lowsoak-in•Fast,aggressivetackforbondingmany lightweight materials•Clear•Bondsmostinsulation,includingexpanded polystyrene and extruded polystyrene•Willnotattackfoamboard•Clear•Neoprene-basedcontactadhesivewith plasticizerresistance•Bondssupportedvinyl,leather,mostrubber, most plastics, laminate and wood•Yellow•Fast,highperformancecontactbondstrength•Adhereswood,highpreesurelaminate,metal, polyethylene, polypropylene and more •Translucent•Highstrengthwoodtolaminatebonding•Clear
Blue 72 SprayAdhesive
Foam Fast 74Spray Adhesive
Repositionable75 Spray Adhesive
Hi-Tack 76 SprayAdhesive
Super 77MultipurposeSpray Adhesive
Polystyrene Foam Insulation 78 Spray Adhesive
Rubber & Vinyl 80Spray Adhesive
Hi-Strength 90Spray Adhesive
Hi-Strength 94WoodworkingLaminate SprayAdhesive
1 min -8 hrs
30 sec -15 min
15 sec -1 hr
2 min -10 min
15 sec -15 min
1 min -15 min
NR
NR
NR
1 min -1 wk
30 sec -15 min
15 sec -3 hrs
2 min -1 hrs
15 sec -30 min
1 min -15 min
3 min -30 min
1 min -10 min
1 min -30 min
Up to 100
Up to 300
Up to 100
Up to 300
Up to 300
Up to 300
Up to 600
Up to 600
Up to 300
VariableWeb
VariableWeb
Mist
VariableWeb
Mist
VariableWeb
Web
VariableWeb
VariableWeb
17.33 - 490
16.9 - 480
10.25 - 290
18.1 - 515
16.75 -475
17.9 - 508
19 - 539
17.6 - 500
14.8 - 420
Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.
1 1 g/sq ft of adhesive coverage may not be enough for a some products. Higher strength applications may need as much as 2.5 grams dry wt/sq ft. Convert sq ft coverage by dividing by 2.5.2 Testing based on ASTM D3163 with birch plywood, 1 inch overlap, 1.5 - 2.5 gm/sq.ft (dry adhesive wt.)3 Testing based on ASTM D1876-01 with coated canvas, pulled at 12 in/mn.4 SAFT Shear Adhesion Failure Test with birch plywood, 1 inch overlap, 100 grams used, temperature start at 90F and ramped 10F every 10 mn. until complete failure.5 California Compliant per California Air Resources Board Consumer Product Rules for Aerosol AdhesivesNR = Not Recommended
Product Information:
3M™ Aerosol Adhesives
16
3M™ Silicone Lubricant lubricates cutting tools and tables. Fast, easy application helps prevent buildup of adhesive, wax, inks, and paints. Won’t stain or become gummy.
Freeingrustednuts,bolts,andfrozenthreadedpartsareonlya few of the many applications for 3M™ 5-Way Penetrant.
Product
Silicone Lubricant
5-Way Penetrant
Citrus Base Cleaner
Adhesive Remover
Sticker and Marker Remover
Multi-Surface Wipes
•Lubricatescuttingtoolsandtables•Helpspreventbuildupofglues,wax,inks,paints•Won’tstainorbecomegummy•FDAlistedingredients*
•Penetrates,lubricates,demoisturizes,cleansandhelpspreventrust•Freesrusted,frozennuts•“Driesout”electricalapparatus•Inhibitscorrosionandpittingofmoldingdiesandextensionscrews
•Multi-purpose,citrus-scentedcleanerremovesgrease,dirt,oilandadhesiveoversprayfromequipment•Softensliquidadhesiveandtaperesidue
•Specificallyformulatedtoremoveadhesivefrommanysubstrateswithnoresidue•Citrus-scented•Alsoavailableinbulk(55,5,and1gallon)
•SameasaerosolAdhesiveRemoverbutmorepreciseapplicationwithpentip
•Convenient,pre-moistened,pleasantscent•Large,thickanddurableforcleaningwithlittleeffort•Noneedtorinseorwashhandsafteruse
Description Temperature Resistance
350°F (177°C)
N/A
N/A
N/A
N/A
N/A
*FDA Listed Ingredients: The ingredients of this product, when dried after application, are listed as indirect food contact additives when used with minimal opportunity for exposure.See 21 CFR 178.3570, 178.3910, and 181.28
Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.
3M™ Cleaners and LubricantsConvenience and a fistfulof work power for maintenanceand production
In thousands of factories and plants, theseaerosol chemicals are proven daily to savetime and effort in maintenance and production.Lubricating, cleaning, inhibiting rust, andother tough jobs become finger-touch easy.Compact container fits in a tool box to goreadily to any job site and can help youreduce storage space and cost. Withtargeted application you get more useableproduct for your money.
3M aerosol chemicals contain no methylenechloride,chlorofluorocarbons(CFCs),or1,1,1-trichlorethane (methyl chloroform).
3M™ Non-Structural Adhesives
Product Information:
17
Rubber or Acrylic Adhesive
3M tapes and fasteners feature advanced 3M rubber or acrylic adhesive formulations.Each has characteristics that affect production and end use performance.
Adhesive
Bonding Surface
Initial Contact (Minimal Contact) After Rubdown (More Contact) After Dwell Time (Excellent Contact)
Adhesive
Bonding Surface
Adhesive
Bonding Surface
Dwell Time – Hours
Adhe
sion
High
Low
Rubber
Acrylic
27844201
Finding the Optimum Tape
To help you make sure of finding the optimum tape for your particular application, you’ll want to consider several factors: rubber or acrylic adhesive, surface energy and contact, stress conditions, end use environment, and substrate characteristicssuchassize,rigidity,thickness,and weight.
Rubber Adhesives
High initial adhesion
Some adhesion buildup
Good shear strength
Moderate temperature resistance
Good solvent resistance
Fair UV resistance
Moderate durability
Acrylic Adhesives
Fair initial adhesion
Gradual adhesion buildup
High shear strength
High temperature resistance
Excellent solvent resistance
Excellent UV resistance
Excellent durability
Rubber vs. Acrylic AdhesiveBond Buildup On Metal Surfaces
Rubber or Acrylic Adhesive
To make rubber adhesives, natural or synthetic rubbers are made tacky by mixing with various compounds. Individual elements do notchange;componentsaresimplymixedtogether to produce an adhesive.
To make acrylic adhesives, plastic compounds aresynthesizedtoobtainspecificchemicalstructures that are tacky. Acrylics can be formulated to produce specific performance characteristics.
Adhesive Surface Contact
Applyingfirmpressuretothebondincreasesadhesiveflowandcontactformoresecurebonding.Time and temperature will typically further increase contact and adhesion values.
3M™ Bonding Tapes
Tape Selection Guide
18
Substrate characteristics
• Thinmaterial
• Flexiblematerialor small rigid parts
• Lightweight
• Thinbondline
•Thickmaterial
•Stifforrigidmaterial
•Mediumtoheavyweight
•Irregularsurfaces
•Gapfilling
• Sealing
Thin Tapes Thick Tapes
General performance characteristics of 3M tapes
Specific performance characteristics by 3M product line
3M™ Adhesive Transfer Tapes
•Thinnestbondlines
•Highshearstrengthadhesiveavailable
•Selecttapescanbedispensedwith Scotch® ATG Applicator for convenience
3M™ Double Coated Tapes
•Carrierforeasierhandling
•Dimensionalstability
•Manyofferremovability
3M™ Double Coated Foam Tapes
•Carrierforeasierhandling
•Dimensionalstability
•Mountingandholdingforindoor applications
3M™ VHB™ Tapes
•Carrierforeasierhandling
•Dimensionalstability
•Mounting,holdingandjoiningfor outdoor applications
•Highbondstrengthandenvironmental resistance
3M™ Bonding Tapes
Substrate characteristics thatdetermine thin or thick tape
You will find information on these two pages to help you narrow tape choices to two or three possibilities for evaluation and testing.
First of all, define the substrates you want to bond. All substrates have characteristics that determine how well a substrate can be bonded with a particular adhesive for performance in a specific environment. Substrate characteristics suchasthickness,rigidity,size,andweightwill help determine your choice between two general groupings of 3M tapes: thin or thick. Each group has general performance characteristics. Thin and thick tapes are thenfurthercategorizedintoproductlineseach differentiated by specific performance characteristics.
Depending on the tape line, a choice of 3Madhesive types is available to meet differentdesign, production, and end use requirements
19
3M™ Bonding Tapes
Adhesive Family Characteristics
100 High Temperature Acrylic 300 High Tack Acrylic 400 Acrylic Adhesive
100MP High Performance Acrylic
300FR Flame Retardant
420 Acrylic Adhesive
100HT Ultra High Temperature Acrylic300LSE Low Surface Energy Acrylic
430 Acrylic Adhesive
200MP High Performance Acrylic
300MP High Tack Acrylic
700 Series Synthetic Rubber
340 High Tack Acrylic
800 Series Natural Rubber
350 High Performance Acrylic
900R Miscellaneous Rubber Adhesive Group
375 High Performance
1000 Series Repositionable Acrylic
Screen Printable Adhesive
220 Industrial Acrylic
290 Low Outgassing Acrylic
• Upto450°Fshort-termheatresistanceand excellent solvent resistance.• Highpeelstrengthcomparedtootheracrylic formulations.• Exceptionalshearstrengthevenatelevated temperatures.• Exhibitslowoutgassingcharacteristics.
• Upto250°Fshort-termheatresistance.• Highinitialadhesionespeciallytolow surface energy plastics.• Quickflowingtospeedlaminationoftextured plastics, foams, fabrics, and coated papers.
• Upto250°Fshort-termheatresistance.• Goodlowtemperatureperformanceand peel strength on many surfaces.• Excellentadhesiontouncoatedpapers.• ClarityandUVresistanceforwindowlabel applications.
• Upto500°Fshort-termheatresistanceand outstanding solvent resistance.• Higherpeelstrengththanmostotheracrylic formulations.• Exceptionalshearstrengthevenatelevated temperatures.
• Meetsvariousflameretardancystandards such as UL94 V-O/2, F.A.R. 25.853, and FMVSS 302.• Similaradhesivepropertiestoadhesive 300 family.• Goodadhesiontoawidevarietyofsurfaces including LSE plastics, foams, and fabrics.
• Upto300°Fshort-termheatresistance.• Hightackadhesive.
• Upto550°Fshort-termheatresistanceand outstanding solvent resistance.• Higherpeelstrengththanmostotheracrylic formulations.• Exceptionalshearstrengthevenatelevated temperatures.
• Upto300°Fshort-termheatresistance.• Outstandingadhesiontolowsurfaceenergy plastics, powder coated paints, and lightly oiled metals.• Goodchemicalandhumidityresistance.
• Upto350°Fshort-termheatresistance.• Leadforhightemperaturesplicing.
• Upto400°Fshort-termheatresistanceand excellent solvent resistance.• Outstandingadhesiontometalandhigh surface energy plastics.• Excellentshearstrengthtoresistslippage and edge lifting.• Short-termrepositionabilityforplacement accuracy.
• Upto250°Fshort-termheatresistancefor automotive interior applications.• Designedespeciallytobondmostplastics and foams.• Economicalattachmentofgraphics.
• Upto200°Fshort-termheatresistance.• Goodadhesiontolowsurfaceenergy substrates.• Forindoorandroomtemperature applications.
• Upto180°Fshort-termheatresistance.• Excellentbondingtofoamandother substrates.• Hightack;mediumshear.
• Upto200°Fshort-termheatresistance.• Offersgoodadhesiontoavarietyof surfaces.• Forindoorandroomtemperature applications.
• Upto450°Fshort-termheatresistance.• Excellentsolventresistanceandadhesion to LSE materials.
• Excellentinitialadhesionandhighbondto a variety of foams.• Utilityrubber-basedadhesiveidealforthe foam fabricating industry.
• Upto300°Fshort-termheatresistance• Bondsawidevarietyofsubstrates• Goodinitialtack
• Goodholdingtomanysurfaces.• Cleanremoval.
• Forselectiveplacementofpressure sensitive adhesive using screen print technology.• EitherUVcurableorwater-basedare available.
• Upto350°Fshort-termheatresistanceand good chemical resistance.• Goodshearstrengthandchemicalresistance for general purpose industrial applications.• Goodadhesiontomostmetalandhigh surface energy plastics.
• Upto450°Fshort-termheatresistance.• ExceedsmostOEMspecificationsfor outgassing and long-term performance.• Highpeelstrengthcomparedtootheracrylic formulations.• Exceptionalshearstrengthevenatelevated temperatures.
20
Product Information:
3M™ Primers
3M™ VHB™ Tapes securely bond stainless steel scuff stripstoaluminumwingflapsdespiteextremeground-to-airtemperature swings of 150°F to -40°F (65°C to -40°C).
For assembly efficiency, die-cut pieces of 3M™ VHB™ Tapes bond components in a waterresistant video camera case. The foam conforms to help seal the unit.
Mirrored ceiling panels are held in place with 3M™ VHB™ Tapes rather than screws. This helps maintain a clean, smoothappearancewithoutdistortingthereflectivesurfaces.
For ease of assembly and precise fit, die-cut 3M™ VHB™ Tapes bond and seal components throughout a GPS unit.
3M™ VHB™ Tape bonds on contact with no drying time or fixturing and saves processing steps such as drilling, screwing, welding, cleanup, and refinishing.
Product
AP 111
Solvent
Isopropylalcohol (IPA)
Active Ingredients
Less than 5%by weight
VOC’s
5.91 lbs. /gallon(708 g/l)
Color
Clear
Flashpoint
52°F (11°C)
Coverage
19 m2/l (800 ft2/gal) based on .002” wet coating thickness depending on method of application.
Application Ideas
Promote better adhesion for bare metals and painted surfaces.
Replace rivets, screws and other mechanical fasteners
For more than 25 years, industries worldwidehave been using 3M™ VHB™ Tapes for highholding power in static and dynamic loads.Viscoelastic properties absorb shock anddistribute stress evenly for bonding powerthat helps eliminate mechanical fastening inmany jobs.
In the ever growing product line, there are3M™ VHB™ Tapes for bonding and sealingaluminum, steel, glass, painted and powdercoated surfaces, and plastics such as acrylicand polycarbonate. Flexibility compensatesfor differential thermal expansion so you caneven bond many dissimilar materials withconfidence.
3M™ VHB™ Tapes bond the lens on contact in a fish finder and seal against water, moisture, salt, and more. Bonding power eliminates mechanical fasteners for a smooth, clean surface. Viscoelastic properties help absorb shock and vibration for bond reliability.
3M™ Bonding Tapes
3M™ VHB™ Tapes
Note: The technical information and data provided here should be considered representative or typical only and should not be used for specification purposes. User should evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for user’s method of application.
Product
AP 115
Solvent
Isopropylalcohol andwater
Active Ingredients
Less than 1%by weight
VOC’s
6.08 lbs. /gallon(728 g/l)
Color
Clear
Flashpoint
53°F (12°C)
Application Temp.
50°F - 100°F(10°C - 38°C)
Coverage
20-25sq.ft.per4fl.oz.bottle(1.8 - 2.3 sq. m per 118 ml bottle)
Application Ideas
Promote better adhesion for glass.
Product
Primer 94
Solids
6%
VOC’s
Approx. 6.3 lbs. /gal. (755 g/l)less H20 and exempt solvents
Color
Clear light yellow-clear dark orange
Flashpoint
-4°F (-20°C)0.C.
Viscosity
35+/-5cps
Coverage
600 sq. ft.(211 sq. m/l) per gallon
Application Ideas
Promote better adhesion for a variety of plastic surfaces such as polyethylene, polypropylene, ABS, PET/PBT blends.
21
3M™ VHB Tapes
•Clear,acrylicconstructionforjoining transparent material
•White,closed-cellacrylicfoamcarrier•Goodadhesiontopolypropyleneand many powder paints
•Clearadhesivetransfertape•Highshearstrengthadhesive•UL746C
Product Information:Co
nfor
mab
le F
oam
Tap
esCo
nfor
mab
le F
oam
Tap
esCl
ear
Application Ideas
Note: The technical information and data provided here should be considered representative or typical only and should not be used for specification purposes. User should evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for user’s method of application.
* 5958FR meets FAR 25.853 (a) 12 sec – vertical burn, Appendix F, Part 1 (a) (ic).
ProductNumber
TapeThicknessw/o linerMils (mm)
Liner Type
Adhesive Type
Description TemperatureResistance
Minutes DaysHours Weeks
SolventResistance
RelativeAdhesion
HSE LSE
4926
4936
4936F
4941
4941F
4956
4956F
4991
4919F
4947F
4979F
5915
5925
5930
5952
5958FR*
5962
4943F
4957F
4611
4646
4655
4914
4920
4930
4950
4929
4949
4955
4959
4945
4946
4951
4932
4952
4905
4910
F9460 PC
F9469 PC
F9473 PC
A
A
F
A
D
A
F
F
F
F
F
D
D
D
D
D
D
C
C
D
D
D
A
A
A
A
C
C
C
C
A
B
C
A
A
D
D
E
E
E
15 (0.4)
25 (0.64)
25 (0.64)
45 (1.1)
45 (1.1)
62 (1.6)
62 (1.6)
90 (2.3)
25 (0.64)
45 (1.1)
62 (1.6)
16 (0.4)
25 (0.64)
32 (0.8)
45 (1.1)
40 (1.0)
62 (1.6)
45 (1.1)
62 (1.6)
45 (1.1)
25 (0.64)
62 (1.6)
10 (0.25)
15 (0.4)
25 (0.64)
45 (1.1)
25 (0.64)
45 (1.1)
80 (2.0)
120 (3.0)
45 (1.1)
45 (1.1)
45 (1.1)
25 (0.64)
45 (1.1)
20 (0.5)
40 (1.0)
2 (0.05)
5 (0.13)
10 (0.25)
•Gray,closed-cellacrylicfoamcarrier
•Conformable
•Goodadhesiontomanypaintedmetals
•Plasticizerresistantchannels.
•UL746C
•Blackversionof4936Ftape
•Blackversionof4941Ftape
•Blackversionof4956Ftape
Multi-purposeacrylic
Multi-purposeacrylic
Generalpurposeacrylic
Generalpurposeacrylic
Generalpurposeacrylic
Modifiedacrylic
Low-tempacrylic
Low-tempacrylic
LSE
100MP
300°F 200°F(149°C) (93°C)
High
High
High
High
High
High
High
High
High
High
High Med.
High Med.
High Low
High Low
High Low
High Low
High Low
High Low
High Low
High High
•Bondandsealpolycarbonatelensover LCD.•Bondandsealplasticwindowstopre- painted control panels/switch gear.•Mountvinylwiringductsandconduit channels.•Seamvinylbanners.
•Bondstoavarietyofplasticsandpaintsystems.•Variousbondingapplicationsforback-litsigns.•GoodadhesiontomanypaintedBond •Bondarchitecturalsignstoframes.• Bondpowderpaintedmetalstiffenerstooffice desks and file cabinets.
•Bondantennas.•Bondautomatictolltagstovehicle.
•Pre-powdercoatpaintapplications: hat channels and stiffeners.
•Attachstiffenersinairconditioners, office furniture and telecommunications equipment.
•Bondpowderpaintedmetalstiffenersto office desks and file cabinets.•Bondpolypropyleneandpolystyrene.
•Bonddecorativemetaltrim.•Bondflexiblecircuitstoaluminum rigidizersorheatsinks.
•Attachvinyltrim.•Bondvinylextrusions.
•Mountbacklittranslucentsigns.•Edge-bondresinfilledglass.
•Lowtemperatureinstalledproducts.
•Black,closed-cellacrylicfoamcarrier• VeryconformableVariousbonding•Goodadhesiontomanypainted surfaces, including powder coated paint•UL746C
•Darkgray,closed-cellacrylic foam carrier •Hightemperatureresistanceacrylic•UL746C
•GrayConformablefoam•Applyaslowas32°F(0°C)
•White,closed-cellacrylicfoamcarrier•All-purposeadhesiveacrylicequipment.•UL746C
•White,closed-cellacrylicfoamcarrier•Plasticizerresistant
•Filmlinerversionof4945•UL746C
•White,closed-cellacrylicfoamcarrier•Applyaslowas32˚F(0˚C)
•Blackversionof4930
•Blackversionof4950
•White,closed-cellacrylicfoamcarrier•All-purposeadhesive•UL746C
Tran
sfer
300°F 200°F(149°C) (93°C)
300°F 200°F(149°C) (93°C)
300°F 200°F(149°C) (93°C)
300°F 200°F(149°C) (93°C)
300°F 200°F(149°C) (93°C)
500°F 300°F(260°C) (149°C)
300°F 200°F(149°C) (93°C)
200°F 160°F(93°C) (71°C)
400°F 300°F(232°C) (149°C)
450°F 300°F(204°C) (149°C)
300°F 200°F(149°C) (93°C)
250°F 200°F(121°C) (93°C)
Liner Types:A – 3 mil 54# Densified Kraft PaperB – 5 mil Clear Polyethylene FilmC – 2 mil Polyester FilmD – 5 mil Red Polyethylene FilmE – 4 mil 58# Polycoated Kraft PaperF – 5 mil Red Printed Polyethylene Film
Relative Adhesion:HSE – High Surface EnergyLSE – Low Surface Energy
Multi Purpose Acrylic: Bonds to a wide range of materials including metals, glass, and high and medium surface energy plastics and paints. Resistsmigrationofplasticizersinvinylsubstrates.
Modified Acrylic: Bonds to medium low surface energy paints and plastics, including many powder coated paints in addition to the substrates listed with the multi-purpose acrylic adhesive (except plasticizedvinyl).
General Purpose Acrylic: Bonds to most higher surface energy substrates including metal, glass, and high surface energy plastics.
Low Temperature Acrylic: Bonds down to 32° F (0°C) compared to 50°F(10°C) for most acrylic adhesives. Bonds most high surface energy substrates including metal, glass, and high surface energy plastics.
Low Surface Energy: High performance synthetic adhesive bonds to manylower surface energy substrates, including many plastics and powdercoated paints, plus smooth general purpose substrates.
100MP: Bonds with higher peel strength than most other acrylicformulations. Up to 500°F (260°C) short term heat resistance.
3M™ Bonding Tapes
22
3M™ VHB™ Tapes for SignsReliable and immediate bonding
For indoor and outdoor signage, 3M™ VHB™Tapes hold immediately without the workof screws and the mess and curing time ofliquid adhesives.
•Bondmetals,plastics,glass,foamboard, and more•Invisiblefasteningforsmooth,attractive surfaces 3M™ VHB™ Tape provides durable bonding in outdoor applications.
Clear 3M™VHB™ Tape permanently bonds aluminum letters to glass and appears almost invisible from behind the pane.
3M™ VHB™ Tape
3M™ VHB™Tape (silaneprimer used on glass)
Glass
Aluminum letter
Note: This technical information and data should be considered representative or typical only and should not be used for specification purposes.
UnpaintedAluminum and Steel
Acrylic,Polycarbonate
Expanded RigidPVC Board
FlexibleVinyl
Unpainted Aluminum and Steel
Painted Surfaces (drywall, metal, wood, concrete)
Acrylic, Polycarbonate
Glass
Transparent Applications
5952
5952
5952
5952
4910
5952
5952
5952
5952
4910
5952
5952
5952
5952
-
4910
4910
4910
4910
-
3M™ Bonding Tapes
23
Product Information:
3M™ Double Coated Foam Tapes for MountingFlexible foam carriers fill gapsand help bond irregular surfaces
In bonding rough or irregular surfaces, 3M™ Double Coated Foam Tapes fill gaps and distribute stress uniformly over the bonded area. Depending on the specific tape, the result is a bond line that seals, cushions and damps vibration, resists impact, withstands a wide temperature range, and provides good insulating qualities. To meet your requirements, select from rubber or acrylic adhesive, and a choice of different foam carriers: urethane, vinyl, elastomeric, polyethylene, or acrylic.
To replace screws and liquid adhesives, 3M™ Multipurpose Mounting Tape 4016 bonds immediately to many indoor surfaces, even permanently mounting a plastic soap dispenser to a mirror.
3M™ Double Coated Urethane Foam Tapes bond plastic signs to painted cinder block. The foam fills gaps between irregular surfaces. Various foam thicknesses are available for surface conformance based on the degree of roughness.
To permanently mount a coat rack to a textured wall, 3M™ Extra Thick Multipurpose Mounting Tape 4008 bonds on contact and fills gaps between the surfaces.
3M™ Double Coated Polyethylene Foam Tapes effectively bond plastic extrusion price channels to grocery shelves.
Uret
hane
Poly
ethy
lene
Viny
lAc
rylic
3M™ Bonding Tapes
ApplicationIdeas
Bond acoustic panels to walls. Mount air fresheners.Mount soap dispensers.Mount interior signs and nameplates.Attach wire clips to various surfaces.Mount electrical channel to wall.
Mount indoor signs, nameplates and wall corner protectors to irregular surfaces.
Attach hooks, wire clips and racks. Mount retail shelf price channels.Mount pen holders.
Mount nameplates on awards and novelties.Point of purchase displays and signs.
Removable P.O.P. displays.Signs.Exhibits and trade shows.Nameplates.
Note: The technical information and data provided here should be considered representative or typical only and should not be used for specification purposes. User should evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for user’s method of application.
ProductNumber
40044008401640264032
4052
4056
4085
4408
44164432
44624466
44924496
4658F
TapeThicknessMils (mm)
250 (6.4)125 (3.2)62 (1.6)62 (1.6)31 (0.8)
31 (0.8)
62 (1.6)
45 (1.1)
125 (3.2)
62 (1.6)31 (0.8)
31 (0.8)62 (1.6)
31 (0.8)62 (1.6)
31 (0.8)
Liner Type
A
E
A
B
C
D
Adhesive Type
100
100
740
430
745
430
100
Description
• Off-white,open-cellurethane foam carrier •Highshearadhesivewith high temperature resistance
•Blackversionof4032tape
•Blackversionof4016and 4026 tapes
•Off-white,open-cellurethane foam carrier •Hightackadhesive
•Black,closed-cellvinyl foam carrier
•Whiteorblack,closed-cellvinyl foam carrier
•Whiteorblack,closed-cell polyethylene foam carrier •Hightackadhesive
•Whiteorblack,closed-cell polyethylene foam carrier •Highshearadhesivewithhigh temperature resistance
•Clearclosedfoamacrylic removable foam tape•Cleanremovabilityfrommany substrates
TemperatureResistanceMinutes DaysHours Weeks
380°F 220°F(193°C) (104°C)
380°F 220°F(193°C) (104°C)
200°F 125°F(93°C) (52°C)
200°F 150°F(93°C) (66°C)
158°F 120°F(70°C) (49°C)
180°F 158°F(82°C) (70°C)
212°F 175°F(100°C) (80°C)
Resistance
Medium
Medium
Medium
Medium
Medium
Medium
High
Relative Adhesion HSE LSE
High Low
High Low
High High
High Low
High High
High Low
High Low
Liner Types:
A – 3 mil 62# Densified Kraft paper – Green plaid
B – 3 mil Densified Kraft paper – White
C – 4 mil 58# Polycoated Kraft paper – Tan
D – 2 mil Polyester film – Clear
E – 3 mil Densified Kraft paper – Tan
Relative Adhesion:
HSE – High Surface Energy
LSE – Low Surface Energy
24
A variety of carriers for easy handling and dispensing
3M™ Double Coated Tapes
3M™ Double Coated Tapes are engineered with adhesive on both sides of paper, film or tissue. This increases the dimensional stability of the adhesive for easy handling and application.
Depending on your production volume, you can apply tape by hand or with automatic high-volume dispensers. Select paper, polyester film or other synthetic carriers to help meet your special needs. Different adhesives – rubber, silicone or acrylic – can be on opposite sides of the carrier to join different materials. Your choice of properties include high temperature resistance, conformability to irregular surfaces, high initial adhesion, high shear strength, and more.
With differential adhesive, the silicone adhesive side of 3M™ Double Coated Tape adheres to a silicone rubber keypad. Acrylic adhesive side adheres to a plastic base.
For precise fit, 3M™ Double Coated Tape is pre-applied tofoamgasketingmaterialsandthendie-cuttosize.Thishelps increase dimensional stability of the part to facilitate assembly.
Product Information:
3M™ Bonding Tapes
TemperatureResistanceMinutes DaysHours Weeks
300°F 250°F(149°C) (121°C)
500°F 300°F (260°C) (149°C)
250°F 150°F (121°C) (65°C)
250°F 180°F (121°C) (82°C)
300°F 200°F (149°C) (93°C)
250°F 195°F (120°C) (90°C)
150°F 120°F (65°C) (49°C)
350°F 250°F (177°C) (121°C)
248°F 185°F (120°C) (85°C)
185°F 158°F (85°C) (70°C)
300°F 185°F (150°C) (93°C)
AdhesiveFamily
200MPHigh Perf
100HTLUltra HighTemp
300 HighStrength
300LSE HighStrength
300MP HighStrength
340 HighStrength
350 HighStrength
375 HighPerform-ance
ProductNumber
9492MP
9495MP
9077
444
9009
9019
9490LE
9495LE
9183
9690
9690B
9824
9828
9500PC
9086
9087
9088
9088FL
TapeThicknessw/o linerMils (mm)
2.5 (0.06)
5.7 (0.14)
2.0 (0.05)
3.8 (0.10)
1.9 (0.05)
1.1 (0.03)
6.7 (0.17)
6.7 (0.17)
6.3 (0.16)
5.6 (0.14)
5.6 (0.14)
3.1 (0.08)
4 (0.10)
5.6 (0.14)
7.5 (0.17)
10.2 (0.22)
8.3 (0.22)
8.3 (0.22)
CarrierType*
PET
PET
Non-Woven
PET
PET
PET
PET
PET
Non-Woven
PET
PET
PET
PET
PET
Tissue
PVC
PET
PET
LinerType
58# PCK
58# PCK
Heat ResistantDK White
55# DK
55# DK
55# DK
58# PCK
58# PCK
DK White
83# PCK
83# PCK
55# DK
55# DK
61.5#PCK
GlassinePaper
GlassinePaper
GlassinePaper
PP
Description
•2.5milversionof9495MP
•Excellentpeelstrengthonhighsurface energy plastics and metals
• Excellentheatresistanceinhigh temperature environments. • Linerwithstandslead-freesolderreflow temperatures.
• Hightackacrylicadhesivewith densified kraft liner
•Thindoublecoatforapplications where thickness is critical
•Ultra-thindoublecoatforapplications where thickness is critical
•300MPadhesiveonfaceside, 300LSE adhesive on the other
•300LSEadhesiveonbothsides for low surface energy surfaces
• Hightensilestrengthnon-woventape with high strength adhesive, removable from many surfaces.
•Excellentadhesiontomostplastics and foams
• 9690witha0.5milblack polyester carrier
•Hightack,generalpurpose acrylic adhesive
•Hightack,acrylicadhesivewith good adhesion to many foams
•Highperformanceonawide array of surfaces
•Goodinitialtack
SolventResistance
High
High
Low
Low
Medium
Medium
High
Medium
Relative Adhesion HSE LSE
High Low
High Low
High High
Med. Med.
High High
High High
High High
High High
ApplicationIdeas
• Automotivedecorativetrimattachment.
•Graphicattachment.•High-pressurelaminatebonding.
• Forhigherprocessingandoperating temperatures applications, Ideal for FPC attachments.
•Gasketattachment.•Goodadhesiontomostplastics.
•Gasketattachmentinhand-held devices and laptops.•Plasticfilmlamination/bonding.
•Gasketattachmenttolowsurface energy surfaces.
•Plasticextrusionattachment.
•Cleanlyremovableadhesivefor recycling parts.
•Foamlamination.•Gasketattachment.
• LEDlensattachmentforcellular phones and pagers.
•Generalpurposelaminating.• Foamlamination.•Gasketattachment.
• LEDlensattachmentforcellular phones and pagers.
•POPdisplays.•Metalfabrication.•Sportsequipment.• Indoor/outdoorsigns.
25
3M™ Double Coated Tapes (continued)
Relative Adhesion: HSE – High Surface Energy, LSE – Low Surface Energy*PET is polyester, PP is polypropylene.
Note: The technical information and data provided here should be considered representative or typical only and should not be used for specification purposes. User should evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for user’s method of application.
Product Information:
3M™ Bonding Tapes
AdhesiveFamily
400MPAcrylic
420Acrylic
700SyntheticRubber
800NaturalRubber
900Misc.
Silicone
Misc.
ProductNumber
415
9420
9576/B/R/Y
9795
9795B
9377
9443NP
401M
401M
9816L9816M9816H
9817L9817M9817H
9731
4377-504377-85
9599
9448HK
9888T
9080HL
9941
CT-6348
TapeThicknessw/o linerMils (mm)
4 (0.1)
4 (0.1)
4 (0.1)
5.6 (0.14)
5.6 (0.14)
11 (0.25)
6 (0.15)
9 (0.23)
6 (0.06)
3.5 (0.09)
3.3 (0.08)
5.5 (0.14)
2 (0.05)3.3 (0.085)
5 (0.2)
6.3 (0.16)
5.9 (0.15)
6.3 (0.16)
3.9 (0.10)
3.5 (0.09)
CarrierType*
PET
PET
PP
PET
PET
PP
HDPE
Paper
paper
PET
PET
Non-woven
Non-woven
Non-woven
Non-woven
Non-woven
Non-woven
LinerType
60# DK
60# DK
60# DK
83# PCK
83# PCK
58# PCK
62# DK
54# DK
54# DK
60#74# Kraft14pt board
60#74# Kraft14pt board
PET/PCK
PET/PCK
DK White
DK White
DK White
DK White
DK White
DK White
Description
• Hightackadhesiontopaperand many other surfaces
•415witha0.5milredcarrier
•Availableintransparent,black,redor yellow carrier
•Doublecoatedversionof3MTape9695 for foam lamination and graphic attachment
•Thinblackpolyestercarrierforimproved handling, die-cutting
•Flameretardantwithspecially formulated black acrylic based adhesive on one side and rubber based adhesive on the other.
•Hightackwithgoodadhesionto most plastics
•Thickflatstockpapercarrier
•Smoothadhesiveonbothsides
•Generalpurpose,hightack, rubber-based adhesive.
•Exposedsideisacrylic,linersideis rubber-based. Excellent quick stick and adhesion to high and low energy surfaces.
• Highperformanceacrylicadhesive/ silicone adhesive, double linered
• Thinnercaliperoptionsofacrylic/silicone adhesive, double linered.
•Highadhesiontoavarietyofmaterials• LowVOC
High adhesion to variety of materials (available in black color, 9448HKB).
Thin non-woven carrier for dimensional stability and improved handling.
General purpose strong bonding adhesive.
Thin caliper double-coated non-woven tape.
Thin caliper double-coated non-woven tape.
TemperatureResistanceMinutes DaysHours Weeks
180°F 150°F(82°C) (65°C)
165°F 125°F(75°C) (52°C)
300°F 250°F(149°C) (121°C)
250°F 180°F(121°C) (82°C)
180°F 150°F(82°C) (65°C)
180°F 150°F(82°C) (65°C)
200°F 150°F(93°C) (65°C)
150°F 120°F(65°C) (49°C)
Acrylic: Acrylic: 220°F 175°F(105°C) (80°C)Rubber:175°F 120°F(80°C) (49°C)
350°F 250°F(177°C) (121°C)
300°F 250°F(149°C) (121°C)
200°F 180°F(93°C) (82°C)
248°F 176°F(120°C) (80°C)
248°F 176°F(120°C) (80°C)
250°F 195°F(120°C) (90°C)
180°F 150°F(82°C) (65°C)
180°F 150°F(82°C) (65°C)
SolventResistance
Medium
Medium
Medium
Medium
Medium
Medium
Medium
Medium
Medium
Medium
Medium
Medium
Medium
Low
Low
Relative Adhesion HSE LSE
Med. Low
Med. Low
Med. Low
N/A N/A
High High
High Med.
High Med.
High High
High High
High High
High High
High High
High High
High Med.
Med. Low
Application Ideas
•Splicepapers,filmsandfoils.
•Splicing,corestarting,miscellaneous joint and bonding, hand tearable.
•LEDlensattachmentforcellphones.
•Carpetinstallationbondingcarpetto interiorfloorboards.
•Assemblecomputerinkcartridges.•Bondingpolyethylene.•Corestartingonmetalcores.
•Mountprintingplates.
•Corestarting/endtabbingofpapers, films and foils.
•Generalpurposefoamorrubber•laminating(60”)•Generalpurposelaminatingof Fabricated parts
•Siliconekeypadattachment.•Printertonercartridgerefurbishing.
•Siliconekeypadattachment.
•Suitableforautomotiveinterior applications.
•Signs,nameplates,foamsand gasket attachment.
•Foamlamination,generalpurpose attachment.
•Foamlamination,generalpurpose attachment.
•Generalpurposebonding, Point-of-purchase, excellent for foam/felt lamination.
•Generalpurposebonding,lowcaliper tape, paper/print applications.
26
3M™ Removable/Repositionable TapesVersatility for many substrates onon-off and open-close applications
3M™ Removable/Repositionable Tape seals hosiery bags for shipment and display but also lets the customer open and reclose the bag as necessary.
High tack side of 3M™ Removable/Repositionable Tape 9415 “permanently” adheres to cores for winding up paper or film. Low tack side releases the paper or film when unwinding.
Some 3M™ Removable/Repositionable Tapesfeature a “permanent” adhesive on one side of a film or tissue carrier and a removable/repositionable adhesive on the other side.
Other tapes in the line offer different levels of adhesion on each side. And others feature equal adhesive strength on each side for reliable attachment but with easy separation for repositioning or multiple openings and closings.You can join substrates that include glass, metals, wood, paper, painted surfaces, and many plastics.
With linered versions, you can initially join one side to a surface while the other side is covered with the liner, ready to be joined later to the second surface. Linerless versions are used for bonding both surfaces at the same time.“Permanent”
pressure sensitiveadhesive
Release liner
Carrier
Repositionablepressure sensitiveadhesive
Product Information:
3M™ Bonding Tapes
AdhesiveNumber
665
666
4451
4658F
9415PC
9416
9425
9425HT
9449S**
AdhesiveType
1070
1070
700
100
400/1000*
400/1000*
420/1050*
420/1050*
1000
TapeThicknessw/o linerMils (mm)
2.5 (0.06)
3.5 (0.09)
32 (0.8)
31 (0.8)
2 (0.05)
1.5 (0.04)
5.5 (0.14)
5.0 (0.13)
0.4 (0.01)
LinerType
Linerless
LDPE
60# PCK
PET
78# PCK
78# PCK
58# PCK
58# PCK
55# DK
Description
•ClearUPVCfilmcarrier•Slightdifferentialtack
•ClearUPVCfilmcarrier•Slightdifferentialtack
•Polyethylenefoamwith synthetic rubber adhesive
•Clear,closedfoamacrylic foam tape
•1milpolyesterfilmcarrier•Hightack/lowtack
• Translucentwhitetissuecarrier•Hightack/lowtack
• ClearUPVCfilmcarrier• Hightack/mediumtack
• Hightack/mediumtack•PETfilmcarrier
• Laminatestovarioussubstratesto make them repositionable
TemperatureResistanceMinutes DaysHours Weeks
125°F 100°F(52°C) (38°C)
125°F 100°F(52°C) (38°C)
150°F 120°F(66°C) (49°C)
212°F 175°F(100°C) (80°C)
180°F 150°F(82°C) (65°C)
180°F 150°F(82°C) (65°C)
125°F 100°F(52°C) (38°C)
250°F 200°F(121°C) (93°C)
150°F 120°F(66°C) (49°C)
SolventResistance
Medium
Medium
Medium
High
Low
Low
Low
High
Low
HSE LSE
High Low
Med. Med.
High Med.
High Low
Med./ Low Low
High Low
High Low
Med. Med.
Low Low
Rem
ovab
le/R
epos
ition
able
Note: The technical information and data provided here should be considered representative or typical only and should not be used for specification purposes. User should evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for user’s method of application.
*Secondnumberreflectsremovable/repositionableadhesiveside.**3M™ Adhesive Transfer Tape
ApplicationIdeas
•Closepolybags.Attachbottle outserts.•Attachmicroscopeslidestoholder.
•Attachchemicallysensitivefilmto test sticks.
• Optionoffoamifyouwant removability.• Temporarysign.
• RemovableP.O.P.displays,signs, exhibitions, and nameplates.
• Corestarting/endtabbing.Hold credit cards in mailers. Close envelopes.
• Removablelabelsandphotos.
• Closepolybagsandenvelopes. Core starting/end tabbing. Backlit signs. Attach labels, novelties, posters, P.O.P. displays.
• Sameas9425butwithhigher temperature performance.
• Easyremovalwithlittleorno residue.
27
Neat, precise application and high performance in a variety of applications
3M™ Adhesive Transfer Tapes are rolls of pressure sensitive adhesive pre-applied to a special release liner.
For application, the tape is simply pressed, adhesive side down, to a surface and the liner is peeled off.
A variety of adhesive properties and liners are available to meet requirements for applications such as nameplate attachment to high and low surface energy plastics, appliance graphic overlays that perform in high temperatures, foam gasketing, web splicing, and more.
With high cohesive strength, 3M™ Adhesive 200MP bonds aggressively with excellent temperature resistance. Meets the non-fogging specifications of the automotive industry.
Release liner
Pressuresensitiveadhesive
Forbondingflexiblevinylinsuchapplicationsasdoorgaskets, 3M™ Adhesive Transfer Tape F9465PC resists the effectofplasticizersthattendtomigratefromthevinyl.
3M™ Adhesive Transfer Tape 465 has the grab strength for manyprintingsplices,includingflyingsplices,zerospeedand manual overlap. Can be used with a variety of paper grades.
3M™ Lami nating Adhesive 300LSE is the solution for low energy surfaces such as polyolefins and powder coat paint. Graphics hold securely and stand up to tough environmental conditions.
3M™ Adhesive Transfer Tape 467MP is used to laminate metal foil to a circuit board to reduce interference on electronic circuitry.
3M™ Adhesive Transfer Tapes provide conformability in a variety of foam laminating applications. The acrylic adhesive also provides high shear strength and good environmentalaging properties.
For graphic beauty, 3M™ Acrylic Adhesive 100 attaches graphics in closed environments. With low odor, reduced outgassing and low fogging, it is used extensively in the automotive, aerospace, and appliance industries.
3M™ Adhesive Transfer Tapes
3M™ Bonding Tapes
28
Relative Adhesion:HSE – High Surface EnergyLSE – Low Surface Energy
Note: The technical information and data provided here should be considered representative or typical only and should not be used for specification purposes. User should evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for user’s method of application.
Product Information:
3M™ Bonding Tapes
F9460PC
F9469PC
F9473PC
9082
9085
2 (0.05)
5 (0.13)
10 (0.25)
2 (0.05)
5 (0.13)
1 (0.025)
• Papersplicingandgeneraloffice and commercial joining.• Validationlabelsandparking permits on car windows.
AdhesiveFamily
TapeThicknessw/o linerMils (mm)
LinerType
DescriptionProductNumber
TemperatureResistance
Minutes DaysHours Weeks
SolventResistance
RelativeAdhesion
HSE LSE
ApplicationIdeas
• Highshearstrength,hightemperature resistance•ULlisting746C
• Excellentheatresistanceinhightemperature environments
• Forapplicationsthatrequireboth higher processing and operating temperatures such as lead-free solderreflowprocesses.
• Adhesivetransfertapeversionof9077, Linerwithstandslead-freesolderreflow temperatures.
• Highperformance,hightemperature formulation•Rotarydie-cuttableliner
• Flameretardanttransfertapewithrotary die-cuttable liner
• Flameretardanttransfertapewith moisture-stable liner liner
• Whiteadhesive• Highopacity
• Hightack,excellentadhesiontoLSEplastics and foams
• 5.0milversionof9471fortexturedsurfaces
• Highbondtoplasticswithhightemperature holding
•Hightack,highshearandhightemperature performance•ExcellentadhesiontoLSEplastics
•Hightack•Excellentadhesiontomostpaperstocks•Flexibleto-60˚F
• Industrialjoiningandmetal fabrication.
• Forhigherprocessingandoperating temperatures applications such as lead-freesolderreflowprocesses.
• Generalindustrialjoining.• Industrystandardforgraphic attachment and die-cut parts.
• Automotive,aeropace,andbuilding construction.
• Gasketattachment,foamfabric and/or coated papers. High adhesion custom labels.
• Bondgraphicstopowdercoatings, LSE plastics and oily metal.• GeneralindustrialbondingofLSE materials.
• Laminatehighperformanceplastics and difficult substrates.• Splicemetalcoils.
High
High
High
High
High
High
Medium
Medium
Low
High Low
High Low
High Low
High Low
High Low
High High
High High
High High
High High
500°F 300°F (260°C) (149°C)
530°F 350°F (277°C) (17°C)
500°F 300°F (260°C) (149°C)
400°F 300°F (204°C) (149°C)
180°F 150°F (82°C) (65°C)
250°F 150°F (121°C) (65°C)
300°F 200°F (149°C) (93°C)
450°F 300°F (232°C) (149°C)
250°F 180°F (121°C) (82°C)
100MP 58# PCK
100HT White DK
100HTL 9079 2 (0.05)
467MP 2 (0.05)
468MP 5 (0.13)
Heat ResistantDK White
350 HighHolding
83#/58# PCK
300LSE HighStrength
300HighStrength
55# DK9459W 1.5 (0.04)
61# PCK9472 2 (0.05)
62# PCK
55# DK
300FRFlamRetardant
55# DK9372DKW 2 (0.05)
60# DK9471 2 (0.05)
83# PCK9372W
9375W
2 (0.12)
55# DK9458 1 (0.025)
55# DK
60# DK
50# PCK
200MPHigh Perf
58# PCK
400 Acrylic
8132LE
8153LE
9471LE
9472LE
2 (0.05)
3.5 (0.09)
2 (0.05)
5 (0.13)
9442
9445
9482PC
9485PC
2 (0.05)
5 (0.13)
2 (0.05)
5 (0.13)463
465
9457
2 (0.05)
29
3M™ Extended Liner TapesVersatile pressure sensitive adhesive on easy-to-remove liners
3M™ Extended Liner Tapes offer the adhesiveversatility of 3M tapes but with liners wider than the adhesive. This leaves an easy-to-lift edge for convenient and easy liner removal. With the variety of adhesives, you have a selection of performance characteristics such as high tack for coated papers and plastics, low tack for temporary attachment, high temperature resistance, and more. Apply manually or with equipment matched to your production volume requirements.
Depending on adhesive type, 3M™ Extended Liner Tapes are applied to envelopes, polybags, boxes, or tubes. User simply peels off liner to expose the adhesive for an immediate,secure closure.
3M™ Extended Liner Tapes are available with a release liner wider than the adhesive. This provides an easy-to-grab edge for convenient liner removal.
3M™ Extended Liner Tapes 450XL, 450EK and 465XL immediately bond product information “outserts” to polyethylene bottles. Holds tightly but can be cleanly removed.
A variety of automatic and semi-automatic equipment is available for higher volume applications. For example, apply tape to business forms, literature, bounce back and businessreply cards.
3M™ Bonding Tapes
Product Information:
AdhesiveType
340
400
600
760
770
ProductNumber
466XL
450EK
450XL
920XL
9926XL
465XL
9934XL
476XL
9925XL3
TapeThicknessw/o linerMils (mm)
2 (0.05)
1 (0.025)
1 (0.025)
1 (0.025)
1 (0.025)
2 (0.05)
4 (0.10)
6 (0.16)
2.5 (0.065)
LinerType
62# DK white with black print
78# ExtensibleKraft whitewithout print
60# DK tan with green print
40# DK white with red print
62# DK white with red print
43# DK white with black print
Description
•Hightack•Permanent
•Generalpurpose
• HightacktoLSE materials
• Hightack,double coated film
• Tissuereinforced•Highinitialadhesion to a wide variety of materials
TemperatureResistance
Minutes Days Hours Weeks
180°F 150°F (82°C) (65°C)
250°F 180°F (121°C) (82°C)
150°F 120°F (65°C) (49°C)
150°F 120°F (65°C) (49°C)
150°F 100°F (65°C) (41°C)
SolventResistance
Medium
Medium
Medium
Medium
Low
Relative Adhesion HSE LSE
High HIGH
Med. Low
High HIGH
High HIGH
Med. Med.
ApplicationIdeas
Coated papers and low surface energy (LSE) plastics. Overnight envelopes. Features an end-of-roll indicator tab for automated dispensing.
Pharmaceutical outsert attachment. For applications requiring a more tear resistant liner.
Pharmaceutical outsert attachment. General paper attachment.
Sealflapsonpoly-bagsandenvelopes.Pressuresensitive edging on business forms, literature, photos, posters, and labels.
Economical alternative for general paper-to-paper applications.
Sealflapsonovernightenvelopes.Pressuresensitiveedging on business forms. General commercial joining applications. For attaching materials that require more adhesive thickness. Larger outsert attachments.
P.O.P. displays. Difficult splicing applications, shelf talkers, price tags, polyethylene foam bonding. indirect food-contact applications.2
Heavy-duty sealing. Mounting of promotional items. Core starting. Closure of overnight boxes, tubes and envelopes. Indirect food-contact applications.2
General mounting. P.O.P. items. Attaching tags and labels. Core starting. Permanent bonding paper-to-paper, business forms, traffic tickets, novelty items and literature. Indirect food-contact applications.2
Note: The technical information and data provided here should be considered representative or typical only and should not be used for specification purposes. User should evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for user’s method of application.
2 FDA acceptable dry ingredients listed as indirect food-contact additives when used in food packing with minimal opportunity for exposure.3 Non-liner side is adhesive coated full width.
Relative Adhesion:HSE – High Surface Energy,LSE – Low Surface Energy
30
Note: Technical information and data should be considered representative or typical only and should not be used for specification purposes.
Long life formulations for top to bottom reliability
3M offers a full range of adhesives with application-specific configurations for die-cut laminations, circuit layer assembly, switch spacers, metal dome placement, lead protection, and switch mounting.
With exceptionally high cohesive strength, 3M adhesives resist slippage, oozing,lifting,channeling,andbucklingforlong-termresistancetothestresses of switch activation. Adhesives also reliably resist high humidity, chemicals, and other challenging conditions.
3M™ Membrane Switch Adhesives
3M™ Membrane Switch Adhesives have been proven for over 20 years to resist high humidity and moisture, extreme temperature ranges, UV light, chemicals, household cleaners, and detergents.
Key Panel Graphics
3M™ Adhesive Transfer Tape
3M™ Membrane Switch Spacer
3M™ Adhesive Transfer Tape
Top Switch Circuit
Bottom Switch Circuit
Backer Board
Product Information:
3M™ Bonding Tapes
Description
Double-linered 300MP. High bond to low surface energy plastics.
Double-linered 467MP.
Double-linered 468MP.
Double-linered467MPwithheavylay-flatlinerforaddedstiffnessandeaseofhandling.
Double-linered468MPwithheavylay-flatlinerforaddedstiffness,controlledkiss-cutting and ease of handling.
Meetsrequirementsofmostkeyboardsandflexcircuitlaminations.
Same as 7945MP but with printed primary liner.
Same as 7953MS except with heavy liner.
Meetrequirementsofmostkeyboardsandflexcircuitlaminations.
Metallizedvaporcoatandwhitecolortoeliminatefloodcoats.
Sheet form of 7956MWS.
Meetrequirementsofmostkeyboardsandflexcircuitlaminations.
Thicker version of 7956MWS.
Sheet form of 7966MWS.
The9000seriesofproductshasalay-flatlineroneachsidewhichimprovesdie-cutting and handling of intricate die-cut parts.
Adhesiveononeside;whitepolyestercarrierforlightmanagement.
Adhesive on one side of clear polyester carrier.
Thick version of 7991MPW.
Single side spacers aid in the construction of membranes with circuitry, i.e. to protect leads, hold domes in place, or build custom spacers.
Liner Type
58# PCK/58# PCK
58# PCK/58# PCK
58# PCK/58# PCK
83# PCK/58# PCK
83# PCK/58# PCK
58# PCK/58# PCK
58# PCK/58# PCK
83# PCK
58# PCK/58# PCK
58# PCK
58# PCK/58# PCK
58# PCK/58# PCK
58# PCK/58# PCK
58# PCK/58# PCK
58# PCK
58# PCK/58# PCK
94# PCK/94# PCK
94# PCK/94# PCK
94# PCK/94# PCK
94# PCK/94# PCK
94# PCK/94# PCK
94# PCK
94# PCK
94# PCK
94# PCK
94# PCK
94# PCK
Product Number
7951
7952MP
7955MP
7962MP
7965MP
7945MP
7953MP
7953HL
7956MP
7956MWS
7956WDL
7957MP
7959MP
7961MP
7966MWS
7966WDL
9045MP
9056MP
9057MP
9059MP
9061MP
7991MPW
7992MP
7992MPW
7993MP
7995MP
7997MP
AdhesiveFamily
300MP
200MP
200MP
200MP
Tape orSpacerThickness
2 mils
2 mils
5 mils
2 mils
5 mils
5 mils
3.5 mils
3.5 mils
6 mils
6 mils
6 mils
7 mils
9 mils
11 mils
9 mils
9 mils
5 mils
6 mils
7 mils
9 mils
11 mils
2 mils
4 mils
4 mils
3 mils
5 mils
7 mils
Layer thickness(mils) Adhesive/Carrier/Adhesive
2/0/0
2/0/0
5/0/0
2/0/0
5/0/0
2/1/2
1.5/0.5/1.5
1.5/0.5/1.5
2/2/2
2/2/2
2/2/2
2/3/2
2/5/2
2/7/2
2/2/5
2/2/5
2/1/2
2/2/2
2/3/2
2/5/2
2/7/2
1/1/0
2/2/0
2/2/0
2/1/0
2/3/0
2/5/0Sing
le C
oate
d Sp
acer
sDo
uble
Coa
ted
Spac
ers
Doub
le-l
iner
ed A
dhes
ive
Tran
sfer
Tap
es
31
Finger touch application of pressure sensitive adhesive
Versatility, convenience and speed. That’swhat you get with the Scotch® ATG AdhesiveSystem for assembly operations in businessesranging from appliance and printing toP.O.P. and electronics. Readily bond, join,mount, or laminate materials such as paper,plastics, metal, foam and more.
With Scotch® ATG Adhesive Applicators,a touch of the finger triggers a quick,controlled application of Scotch® ATG Tapeat the same time as the liner rewinds intothe applicator. There is no mess and nocleanup. 3M advanced acrylic adhesive bondson contact and is formulated with a choiceof properties such as high temperatureresistance, differential tack, adhesion tolow surface energy plastic, and more.
Scotch® ATG Applicator 700 for 3/4”, 1/2”, and 1/4” wide tape (1/4” adapter purchased separately).
Scotch® ATG Applicator 714 for 1/4” wide tape.
Scotch® ATG Applicator 752 for 3/4”, 1/2”, and 1/4” wide tape (1/4” adapter purchased separately).
Scotch® ATG Applicator 3662 for 2” wide tape.
Save time and effort with the Scotch® ATG Adhesive System. You apply a precise strip of adhesive at the same time as the liner rewinds into the applicator.
Scotch® ATG 700 Applicator with Scotch® ATG Tape 924 makes fast work of folder assembly. Pressure sensitive adhesive bonds immediately and the folder pocket is ready to hold contents.
High performance Scotch® ATG Tape 926 bonds foam cushioning inside a portable power tool carrying case.
Leader permits fast,easy loading
Pressure sensitiveadhesive
Release liner
Scotch® ATG Adhesive Systems
3M™ Bonding Tapes
Product Information:
ApplicationIdeas
Attach fabric swatches in sample books.
Assemble point-of-purchase displays.Bond trim strips to furniture or luggage.Bond labels to plastic toys.Attach gaskets or foams.
Bond fabric or trim to window blinds.Splice aluminum coils.Bond foam insulation.Mount nameplates on award plaques.
Attach photos to layouts.Attach labels.
Seal pocket in folders.Bond mat board in picture frames.Splice paper, films, foils.General purpose bindery attaching.
Attach credit card in mailer.Core start/end tab paper, films and foils.Attach temporary labels.
Note: The technical information and data provided here should be considered representative or typical only and should not be used for specification purposes. User should evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for user’s method of application.
Relative Adhesion: HSE – High Surface Energy, LSE – Low Surface Energy
AdhesiveType
300HighTack
350High Performance
400GeneralPurpose
400/1000Respositional
ProductNumber
976
969
926
970XL
924
987*
928
TapeThicknessw/o linerMils (mm)
2 (0.05)
5 (0.13)
5 (0.13)
1 (0.025)
2 (0.05)
1.7 (0.040)
2 (0.05)
AdhesiveTransfer TapeEquivalent
927
950
9485PC
920XL
465
9498
9416
Description
•Hightack•Excellentadhesionto most plastics
•Highperformance• Excellenttemperature and solvent resistance
•Generalpurpose•Excellentadhesionto most paper stocks
•Differentialtack•Repositionable
TemperatureResistanceMinutes DaysHours Weeks
250°F 150°F(121°C) (65°C)
450°F 300°F(232°C) (149°C)
250°F 180°F(121°C) (82°C)
180°F 150°F(82°C) (65°C)
Resistance
Medium
High
Medium
Medium
Relative Adhesion HSE LSE
High High
High High
Med. Low
High/ Low/ Low Low
32
Holding power, line sharpness,and removal the way you want
In this simplified line, you will find a range of such characteristics as adhesive holding power, line sharpness, and clean removal to meet different application requirements for virtually every industrial and consumer application. 3M products also feature...
•Instantadhesionatatouch
•Easytearwithoutstretchingorpulling
•Controlledunwind...nottooeasyortoohard
•Conformabilitytostretchandadherearound curves
For attaching production records during assembly, warranty cards, or other temporary communications, 3M™ Masking Tapes 203, 2307, 200, and 2214 are cost-effective options.
Some masking tapes leave a ragged paint edge that may require rework. 3M™ Masking Tapes feature a thin, smooth backing for a sharp paint line.
A quick easy wrap of 3M™ Masking Tape bundles plastic or metal pipes and other items. Select from wide range of temperature resistance to meet storage or transport conditions.
With an engineered balance of crepe and adhesive, 3M™ Masking Tapes conform to compound surfaces and around curves without tearing the backing.
OtherOther
3M 3M
Product Adhesion to Steeloz./in.(N/100 mm)
Color(s) TotalThicknessmils (mm)
Tape Structure(Backing/Adhesive)
Tensile Strengthlbs./in. (N/100mm)
Elongation at Break %
TemperatureResistance°F (°C)
Comments
Product Information:
Low Temperature (Holding, Bundling and Sealing)
Medium Temperature (Paint Masking)
High Temperature (Paint Masking)
200
2214
2321
23081
2141
26931
4.4 (0.11)
5.2 (0.13)
6.3 (0.16)
5.3 (0.13)
6.7 (0.17)
8.5 (0.21)
25 (27)
22 (24)
41 (44)
35 (38)
27 (29)
46 (50)
19 (333)
22 (385)
27 (472)
22 (385)
24 (420)
26 (455)
8
9
8
10
10
10
Good instant adhesion.
Good for holding and bundling.
Good paint lines.
Good transfer resistance.
Stain resistant.
Veryaggressiveholding;excellentformulti-bake paint cycles.
Crepe Paper/Rubber
Crepe Paper/Rubber
Crepe Paper/Rubber
Crepe Paper/Rubbe
Crepe Paper/Rubber
Mini-Crepe Paper Synthetic
Tan
Tan
Tan
Tan
Tan
Tan
Up to 200°F (93°C)*
Up to 150°F (66°C)*
Up to 250°F (121°C)*
Up to 250°F (121°C)*
Up to 350°F (177°C)*
Up to 325°F (163°C)*
Note: This technical information and data should be considered representative or typical only and should not be used for specification purposes.
1Meets ASTM D6123/D6123M-97 *Up to 30 minutes
1Meets ASTM D6123/D6123M-97 *Up to 30 minutes
*Up to 30 minutes
3M™ Masking Tapes
3M™ Masking Solutions
33
Product Adhesion to Steeloz./in.(N/100 mm)
Color(s) TotalThicknessmils (mm)
Tape Structure(Backing/Adhesive)
Tensile Strengthlbs./in. (N/100mm)
Elongation at Break %
TemperatureResistance°F (°C)
Comments
Product Information:
8979
8979N
3939
3900
3903
1910C
12.6 (0.33)
12.6 (0.33)
9.0 (0.23)
17.7 (0.19)
6.3 (0.16)
6.0 (0.15)
52 (57)
52 (57)
55 (60)
56 (62)
20 (21)
97(106)
36 (643)
36 (643)
25 (438)
22 (385)
14 (245)
11 (197)
21
21
17
15
150
12
Up to 6 months clean removal from most opaque surfaces indoors or outdoors. Will not delaminate or deteriorate for up to a year. Excellent water resistance. Unique slate blue color lets customer know they have used the right tape. Tested according to UL 723, HUD and BOCA Codes.
Samefeaturesas8979andmeetsASMENQA-1(supercedesANSI N45.2.2 and NRC 1.38 Para. 2C Div A3.5. (1)(A)) and MIL-STD-2041D(SH). Copy of certificate in each carton. Tested according to UL 723, HUD and BOCA Codes.
Variety of widths, versatile for many applications. Tested according to UL 723, HUD and BOCA Codes.
General purpose duct tape, temporary repairs, color-coding. Tested according to UL 723, HUD and BOCA Codes.
General purpose duct tape for color coding and marking. Embossed vinyl backing for easy tear.
Economical choice for sealing, holding and marsting.
Polyethylene overcloth scrim/rubber
Polyethylene overcloth scrim/rubber
Polyethylene overcloth scrim/rubber
Polyethylene overcloth scrim/rubber
Vinyl/rubber
Polyethylene overcloth scrim/rubber
Black, Olive,Slate blue
Slate blue, Red
Silver
Black, Blue,Olive, Red,Silver, White,Yellow
Black, Blue,Gray, Green,Red, White,Yellow
Black, Silver
Up to 200°F (93°C)
Up to 200°F (93°C)
Up to 200°F (93°C)
Up to 200°F (93°C)
Up to 250°F (121°C)
Up to 200°F (93°C)
Note: This technical information and data should be considered representative or typical only and should not be used for specification purposes.
3M™ Duct Tapes and Cloth TapesDependability and versatility forbundling, sealing, reinforcing, and more
Features include:•Handtearable•Hightensilestrength•Conformability
3M™ Performance Plus Duct Tape 8979 and nuclear grade 8979N... the best performing 3M™ Duct Tapes under the sun:
•Removecleanlyforuptosixmonthsfrom most opaque surfaces even after exposure to sun and outdoor weathering•Stayonforuptooneyearwithout deterioration•Savetimeandhassleofremovingstickyor dried-on residue•Strongwaterproofbackingresistswear, abrasion, moisture, and weathering
Write on the surfaces of many 3M™ Duct Tapes with pen or marker to leave a reminder or mark and identify works-in-progress, components, items bundled, and more.
For temporary capping of pipes or conduit, 3M™ Performance Plus Duct Tapes 8979 and 8979N conform and adhere to metal and plastic. Strong backing keeps out water and dirt for up to a year even in outdoor storage.
For a tight seal in many containment situations, 3M™ Performance Plus Duct Tape 8979 attaches heavy poly draping, closes cuffs, and then removes cleanly when the job is finished.
For bundling a wide variety of items, 3M™ Duct Tapes with natural rubber adhesive and high tensile strength backings adhere on contact and hold securely.
Waterproof backing of 3M™ Performance Plus Duct Tape 8979 resists moisture and rain for up to a year.
3M 8979Equal
WeatheringExposure
TypicalDuct Tape
Best in class tapes for indoor/outdoor use, offering clean removal and long term weatherability
Heavy duty tapes for demanding contractor, MRO and industrial job site applications
Utility and general use tapes for lighter duty applications
3M™ Masking Solutions
34
Product Adhesion toSteeloz./in.(N/100 mm)
Tape Structure(Backing/Adhesive)
TotalThicknessmils (mm)
BackingThicknessmils (mm)
Tensile Strengthlbs./in. (N/100mm)
Elongationat Break %
Comments
Product Information:
ASTM Test Method: D-3652 D-3330D-3652 D-3759 D-3759
Scotch® Box Sealing Tape
Tartan™ Box Sealing Tape
311
313
353
355
371
372
373
375
302
305
369
2.05 (.052)
2.55 (.065)
1.9 (.048)
3.43 (.089)
1.9 (.048)
2.2 (.056)
2.5 (.064)
3.1 (.079)
1.6 (.040)
1.8 (.046)
1.6 (.041)
Available in Clear and Tan
Available in Clear and Tan
Available in Clear and Tan
Available in Clear and Tan
Available in Clear, Tan, Blue, Green, Orange, Red, White, and Yellow
Available in Clear and Tan
Available in Clear, Tan, Blue, Green, Orange, Red, White, and Yellow
Available in Clear and Tan
Available in Clear and Tan
Available in Clear and Tan
Available in Clear and Tan
–
–
110
130
160
160
160
160
116
–
160
22 (24)
24 (26)
45 (49)
78 (85)
45 (44)
45 (49)
50 (55)
55 (60)
18 (20)
–
30 (32)
25 (438)
35 (613)
25 (437)
67 (1174)
22 (385)
26 (455)
30 (525)
35 (613)
23 (402)
21 (368)
19 (333)
1.1 (.028)
1.6 (.041)
1.0 (.025)
2.0 (.051)
1.2 (.030)
1.4 (.035)
1.6 (.041)
2.0 (.051)
1.0 (.025)
1.0 (.025)
1.0 (.025)
Polypropylene/Acrylic
Polypropylene/Acrylic
Polyester/Synthetic Rubber
Polyester/Synthetic Rubber
Polypropylene/Synthetic Rubber
Polypropylene/Synthetic Rubber
Polypropylene/Synthetic Rubber
Polypropylene/Synthetic Rubber
Polypropylene/Acrylic
Polypropylene/Acrylic
Polypropylene/Synthetic Rubber
Note: This technical information and data should be considered representative or typical only and should not be used for specification purposes.
Dependability for food and beverage, electronics, e-fulfillment, pharmaceuticals, and more
With choices of polyester or polypropylenebackings and rubber or acrylic adhesives,you have dependability for a wide variety ofboxtypes,sizes,contents,handlingsituations, and storage conditions.
•Builttoughtoresistscorelinebreakingand center seam splitting even when boxes are handled rough
•Reliabilityevenwiththestressesofover packed or under packed boxes
•Quick,easyapplicationbyhand,manual dispensers, or 3M-Matic™ Case Sealers
•Choiceoflengths,widths,andcolorstomeet specific needs
In vacuum lift applications, Scotch® Box Sealing Tapes provide the necessary high initial holding power for secure closure.
Consistent quality of Scotch® Box Sealing Tapes means less interruptions on your packaging line and a favorable response at the receiving end.
Scotch® Box Sealing Tapes with polyester backing and synthetic rubber adhesive resist moisture in storage and shipping.
Scotch® and Tartan™ Box Sealing Tapes
3M™ Packaging Solutions
35
Product Total Thicknessmils (mm)
Backing Adhesive Adhesion toSteeloz/in(N/100mm)
Reinforcement Tensile Strengthlbs./in. (N/100mm)
Color Typical Use
Product Information:
ASTM Test Method: D-3330 D-3759 D-3759
Reinforced Strapping Tape
8896
8898
8915
8916
8916V
8919
Synthetic Rubber Resin
Synthetic Rubber Resin
Synthetic Rubber Resin
Synthetic Rubber Resin
Synthetic Rubber Resin
Natural Rubber Resin
Blue/Ivory
Blue/Ivory
Clear
Clear
Blue/Clear
Clear
Secure,StabilizeParts
Secure,StabilizeParts
Secure,StabilizeParts
Secure,StabilizeParts
Secure,StabilizeParts
Secure,StabilizeParts
160 (2800)
160 (2800)
170 (2980)
170 (2980)
210 (3678)
380 (6650)
4.6 (.12)
4.6 (.12)
6.0 (.15)
6.0 (.15)
6.8 (.17)
7.0 (.18)
75 (82)
75 (82)
60 (65)
65 (71)
75 (82)
70 (76)
None
None
Glass Yarn
Glass Yarn
Glass Yarn
Glass Yarn
TensilizedPolypropylene
TensilizedPolypropylene
Scotchpro™ Film
Scotchpro™ Film
Scotchpro™ Film
Scotchpro™ Film
Note: This technical information and data should be considered representative or typical only and should not be used for specification purposes.
Scotch® High Strength Tapes with Clean RemovalSecure and stabilize with no mess, no cleanup for appliances, furniture, electronics, and more
These high strength tapes not only hold securely but remove cleanly with no stickyresidue and tape slivers for cleanup.
•Easy,neatremovalfromunpaintedand painted metal, glass, vinyl, many plastics, and more
•Nostainingorghostingonmostsurfaces
•Choiceofstrongpolypropylenebackingor glass yarn reinforcement for the demands of various jobs, for example:
•Holdplasticrefrigeratordrawerswith Scotch® Film Strapping Tape 8896 •Keepheavywasherlidsorovendoors closed with Scotch® Filament Tape 8916V or 8919. •Securethelastlapofmetalcoilswith Scotch® Film Strapping Tape 8916
For refrigerators, Scotch®CleanRemovalTapesofferchoicesforsecuringandstabilizinginsideandout.Filamenttapesholddoors closed during transit, including stainless steel or powder coated. Film strapping tapes hold foam corners and rubber cords during shipment, and keep plastic drawers closed during manufacturing and through in-store display and home delivery.
Scotch® Film Strapping Tape 8898 bonds firmly to many plastics surfaces, such as those found with computers and peripherals, but leaves no sticky residue when removed.
For maximum impact resistance, Scotch® Filament Tape 8919 secures hinged doors of heavy appliances during shipping. Rubber resin adhesive resists staining on most surfaces.
3M™ Packaging Solutions
36
Streamlined selection for application success
Up to 120 lbs./in. Up to 270 lbs./in. Up to 600 lbs./in.
Palletunitizing
Carpetbundling
PVC pipebundling
Rerodbundling
Graphicsfriendly
L and C-clipclosures
Metalcoiltabbing
Stabilizingloose parts
Product Tensile Strength*
8932** 95 lbs./in.Glass yarn reinforced
8934** 100 lbs./in.Glass yarn reinforced
860** 110 lbs./in.Tensilizedpolypropylene
862 120 lbs./in.Tensilizedpolypropylene,polypropylenereinforced
Product Tensile Strength*
8898 160 lbs./in.Glass yarn reinforced
897 170 lbs./in.Glass yarn reinforced
8651 175 lbs./in.Tensilizedpolypropylene,polypropylenereinforced,clear to see through
880/880NR 270 lbs./in.Polyester yarn reinforced, synthetic or natural rubber
Product Tensile Strength*
893 300 lbs./in.Glass yarn reinforced
898/898NR 380 lbs./in.Glass yarn reinforced, synthetic or natural rubber, first choice for L and C-clip closures of non-RSC boxes
8919 380 lbs./in.Glass yarn reinforced, clean removal
890NR 600 lbs./in.Glass yarn reinforced, natural rubber, high strengthfilament product
* ASTM Test Method D-3759 ** Tartan BrandNote: This technical information and data should be considered representative or typical only and should not be used for specification purposes.
Three questions to make strengthselection as easy as 1, 2, 3
1. What is your application? Bundling,palletizing,non-RSCboxclosing, color coding, reinforcing, coil tabbing, unitizing,combining,securing,other.
2. How much tensile strength do you need? Tensile strength is the tape’s resistance to breakage when pulled from opposite ends.
3. What type of adhesive do you need? Natural rubber for hard-to-stick-to surfaces, synthetic rubber for a variety of other surfaces, or clean removal.
Answers will probably take you to one of twelve 3M™ High Strength Tapes in the streamlined selection. If your application requires a unique solution or tape characteristic, please review the following pages.
Scotch® High Strength Filament Tapes
3M™ Packaging Solutions
37
Scotch® Manual DispensersEasy dispensing for manufacturing, office, commercial, and retail jobs
All Scotch® Manual Dispensers for box sealing tapes, filament tapes, film tapes, label protection tapes, and pouch tapes are application-designed to meet the needs of the customer. Select from a variety of hand-held and heavy duty pull-and-tear table top dispensers. The following table also includes more specializeddispensers:definitelengthdispensers,semi-automaticfilamenttapedispensersandstretchabletapedispenserswhichdeliverthetapetotheproduct adhesive side up.
Scotch® Box Sealing Tape Dispensers Hand-held dispensers for use with specially formulated Scotch® Box Sealing Tapes.
Scotch® Filament Dispensers Hand-held dispensers for use with Scotch® High Strength Filament Tapes.
Scotch® Label Protection DispensersTabletop and portable dispensers designed specificallyfor 3M™ Label Protection and Pouch Tapes.
Scotch® Filament Tape DispenserHand-held dispenser for applying up to 18mm wide L-clip or C-clip of Scotch® High Strength Filament Tapes to close boxes.
Scotch® Box Sealing Tape Dispensers Hand-held dispensers for use with specially formulated Scotch® Box Sealing Tapes.
Scotch® Filament Dispensers Semi-automatic dispensers for use with Scotch® High Strength Filament Tapes.
Scotch® Definite Length DispensersDispensers that deliver a uniform length of 3M™ Narrow Width Tape and Scotch® Filament Tapes every time quickly and easily.
Scotch® Bag SealersAppliestapeinanadhesive-to-adhesiveflagseal.
Scotch® Box Sealing Tape Dispensers Hand-held dispensers for use with specially formulated Scotch® Box Sealing Tapes.
Scotch® Filament Dispensers Hand-held dispensers for use with Scotch® High Strength Filament Tapes.
Scotch® Heavy-Duty DispensersManual heavy-duty dispensers for use with 3M™ Narrow Width Film Tapes.
Scotch® Stretchable Tape DispenserHand-held dispenser with tensioning/stretching brake for use with 3M™ Stretchable Tapes.
3M™ Packaging Solutions
H-123
H-190
H-192
H-183
H-128
H-130
H-133H-38
H-131
H-10
H-12
H-120
C-22
M-707
M-727M-96
M-920
P400
C-23
C-25
S-634
S-63
H-180
H-171
H-1755
H-129
H-128
H-122
H-320
38
Productivity with quick heightand width adjustments
With quick manual adjustment, these rugged units reliably and accurately seal runs of the samesizecartonsforavarietyofmarkets:foodand beverage, medical devices, pharmaceutical, electronics, retail, manufacturing, and distribution centers.
•Patented3M™AccuGlide™2+and3Taping Heads securely apply tape with low impact to protect even lightweight cases and their contents
120af – Adjustable side belt drive for sealing lightweight, narrow cases at up to 27/minute with 36-48mm tape. Automaticallyfoldstopminorandmajorflaps
700aks – Especially designed for sealing larger RSCs such as used in the appliance, electronics, and bedding industries. Forreliablesealing,theadjustablekingsizetopandbottombelt drive dependably conveys uniform cases up to 25.5” wide by 36” high at up to 40/minute. Includes 72mm tape width 3M™ AccuGlide™ 3 Taping Head.
800ab–Sealsbottomflapsonlyatupto40cases/minute.Adjustable side belt drive conveys a wide range of RSC sizesandweights:lengthsof6”andmore;4.25-21.5”widths;4.75”tounlimitedheights.
700a – Advanced features to seal uniform cases up to 40/minute. Dual masts with dual lead screws for stability and uniform height adjustments. Adjustable top and bottom belt drive system for reliable conveyance of heavier or tall/light boxes. Compression rollers position each box for precise tape sealing.
800asb – Same adjustable side belt drive as the 800a but designed for boxes as small as 6” long, 3.9” wide, and 2.75” high. Seals up to 30 cases/minute with 36mm tape.
200a – Durable bottom belt drive for up to 40 RSCs/minute. Dual masts with dual lead screws for stability and uniform height adjustments. Durable and cost efficient for basic case sealing – the most popular 3M-Matic™ Adjustable Case Sealer.
800a – Adjustable side belt drive for a wide range of RSC sizesandweights:lengthsof6”andmore;4.5-21.5”widths;4.75-24.5”heights.Sealsupto40cases/minutewith 36-48mm wide Scotch® Box Sealing Tapes.
800af–Automaticallyfoldstopminorandmajorflapsandtightly seals cases with 36-48mm tape at up to 28 cases/minute. Spring loaded drive with twin gear motors for heavy duty performance.
3M-Matic™ Adjustable Case Sealers
3M™ Packaging Solutions
39
3M™ Package Attachment and Label Protection Products
3M™ Padded Tape Products
Keep shipping labels legible,clean, and attractive
3M™ Pouch Tapes feature a perimeter ofpressure sensitive adhesive around the edgeof non-tacky film. The adhesive sticks topackages creating a film pouch to contain andprotect shipping documents as well as smallparts and promotional items.
Read-through 3M™ Label Protection Tapeshold labels in place, keeping them legible,clean, and intact.
Application areas for both product lines:•Foodandbeverage•Generalmanufacturing•Mailrooms•Merchandisingandpromotions•Produce•Retail
Variety of tape products in pre-cut, easy-to-use strips on a pad
For application convenience, the quick tackbenefits of 3M pressure sensitive adhesivetape technology are available in severalpadded products.
Tape strips•Recouperageorbundling•Identificationandmarkingtags
Document Control – Rugged Scotch® Polyester Film tape 356 with long-aging adhesive protects labels in harsh or outdoor environments against water, UV, chemicals, and abrasion.
3M™ ScotchPad™ Custom Tape Pads 809G are available in awidevarietyofsizesandcolors.Theycanbeusedinmanyapplications including repairing of paper or poly bags.
Label Attachment and Protection – Scotch® Britegard™ Film Tape 823. Bright yellow directs the eye to the label. Best choice for protection of print on carbonless labels.
3M™ ScotchPad™ Custom Printed Tape Pads 809GP can be printed with a custom message in a wide variety ofsizes.
Attach premiums and small parts packets – Scotch® Custom Printed Pouch Tape 828CP securely attaches and seals product samples, small parts packets, merchandise, premiums, literature, catalogs, or brochures.
3M™ ScotchPad™ Hang Tabs are clear, sturdy plastic with pressure sensitive adhesive that sticks to most surfaces. Handy for shrinkwrap packages as well as in-store repair of damaged packaging such as torn punches in chipboard header cards.
Versatile and portable tape pads – 3M™ Scotchpad™ Pouch Tape Pad 830 is the same as Scotch® Pouch Tape 824 but in a compact, easy and ready-to-use pad. No dispenser needed.
3M™ ScotchPad™ Custom Printed Marking and Identification Tags 818CP hold up under rough handling for labeling, banding, pricing, or UPC applications.
3M™ Packaging Solutions
40
Product Adhesion to Steeloz./in.
(N/100 mm)
Tape Structure(Backing/Adhesive)
TotalThicknessmils (mm)
TensileStrengthlbs./in.
(N/100 mm)
BackingThickness mils (mm)
Elongationat Break
%
Comments
Product Information:
Note: This technical information and data should be considered representative or typical only and should not be used for specification purposes.
ASTM Test Method: D-3652 D-3652 D-3330 D-3759 D-3759
Easy to apply and use handleswith custom branding andpromotional messages
Pressure sensitive adhesive at each end of afilm strip bonds securely on contact to thesides of a product or package, creating anadhesive-free loop between for carrying.Non-sticky paper loop can be customprinted with product information such asbar codes, logos, or promotional messages.
Loop area is available in colors or withcustom printing using up to 4 colors
Applications include bundling multi-packsof lightweight goods, carrying productssuch as small appliances, toys, and hardwareitems, combining and providing a handlefor awkward-to-carry items such as pillows,secure closure of “tuck-in” boxes (eg. bakerygoods) – all while providing a handle.
Weight capacity of 3M™ ScotchPad™ Carry Handles range from10-35poundsdependingonthehandlesizeandthelength of the adhesive contacting the product or package.
For multi-packs and awkward to hold packages and products. 3M™ ScotchPad™ Carry Handles add comfortable grab-and-go convenience as an added incentive for customers to buy.
With custom printing 3M™ ScotchPad™ Carry Handles build brand recognition and display UPCs, coupons, and special offers.
Synthetic rubber adhesive on each end of a 3M™ Carry Handle grips securely to plastic and many other product and package surfaces. Rugged polypropylene/paper handle conforms to contours for full strength bonding over the contact area.
Handles on a pad for peeland apply convenience.
3M™ ScotchPad™ Carry Handles
3M™ Packaging Solutions
8325
8326
8327
8328
3.2 (.081)
3.2 (.081)
3.5 (.089)
3.5 (.089)
Custom printed carry handle
White, unprinted carry handle
Custom printed heavy duty carry handle
White, unprinted heavy duty carry handle
160
160
130
130
55 (61)
55 (61)
78 (85)
78 (85)
35 (613)
35 (613)
67 (174)
67 (174)
2.0 (.051)
2.0 (.051)
2.0 (.051)
2.0 (.051)
Polypropylene/Paper/Synthetic Rubber
Polypropylene/Paper/Synthetic Rubber
Polyester/Paper/Synthetic Rubber
Polyester/Paper/Synthetic Rubber
41
1A-20: Acrylic - high strength adhesion to high energy surface. R-25: Synthetic Rubber - ideal for low surface energy substrates. R-30: Natural Rubber - excellent adhesion to a wide variety of surfaces.260# (lb./ream) white silicone coated paper with printed 3M Bumpon Logo.
Note: This technical information and data should be considered representative or typical only and should not be used for specification purposes.
R-30R-30 A-20
62 (1.6)
31 (0.8)
125 (3.2)
62 (1.6)
31 (0.8)
70 Shore A
70 Shore A
70 Shore A
70 Shore A
70 Shore A
Natural Rubber(R-30) 3.6 (0.09)
Natural Rubber(R-30) 3.6 (0.09)
Synthetic Rubber (R-25)
2.0 (0.05)
Synthetic Rubber (R-25)
2.0 (0.05)
Synthetic Rubber (R-25)
2.0 (0.05)
Polyurethane
Polyurethane
Polyurethane
Polyurethane
Polyurethane
R-30R-30R-30R-30A-20R-30
R-30R-30
R-30R-30R-30
3M™ Bumpon™ Protective Products – Molded Shapes, Polyurethane RollstockTake the edge off noise, put an end to scratches
Wherever slamming, scratching, nicking, scuffing, sliding, vibration, or noise could be a problem for your product – or make your product a problem – 3M™ Bumpon™ Protective Products provide a margin of safety. You have a choice of permanently resilient pads, feet, buttons, strips, bumpers, or spacers.
•Pressuresensitiveadhesivesbondfastand permanently when pressed to most clean, dry, and smooth surfaces•Resilientelastomerwillnotdryout,rot,or embrittle;cushionsanddampsnoiseindefinitely•Highcoefficientoffrictionresistsskiddingon most surfaces•Containsnocorrosiveplasticizerorvulcanizing agent to chemically mar surfaces•Easytoapply:separatefromlinerand“bump- it-on” with no screws, rivets or application equipment
3M™ Bumpon™ Protective Product SJ5312 is a clear cylinder that blends with glass or acrylic cutting boards and similar applications requiring near invisibility. Resists yellowing with age.
3M™ Bumpon™ Protective Products rollstock is available in a wide range of lengths and widths with a choice of acrylic, rubber, and synthetic rubber adhesives for bonding to virtually any surface.
Product Information
Product
Product
SJ5012SJ5076SJ5312
SJ5816
SJ5832
SJ6208
SJ6216
SJ6232
SJ5003SJ5009SJ5017SJ5027SJ5306SJ5532
SJ5007SJ5008
SJ5018SJ5023SJ5514
Color
Color
White, Gray, Brown, BlackBlackTransparent
Black, Brown
Black, Brown
Black
Black
Black
White, Gray, Brown, BlackBlack, White, Gray, BrownWhite, Black, Gray, BrownBlack, Gray, BrownTransparentWhite, Black
White, BlackWhite, Gray, Brown, Black, TransparentWhite, Gray, Black, BrownWhite, Gray, Brown, BlackBlack, White, Gray, Brown
Adhesive1
Tape Construction
Backing Facestock Caliper mils (mm)
Shape
CylindricalCylindricalCylindrical
HemisphereHemisphereHemisphereHemisphereHemisphereHemisphere
Tapered SquareTapered Square
Tapered SquareTapered SquareTapered Square
0.500 (12.7)0.315 (8.0)0.140 (3.6)
0.440 (11.2)0.880 (22.4)0.750 (19.1) 0.630 (16.0)0.375 (9.5)1.880 (47.8)
0.413 (10.4)0.500 (12.7)
0.500 (12.7) 0.812 (20.6)0.812 (20.6)
0.140 (3.6)0.110 (2.8 )0.140 (3.6)
60# Paper2 2.0 (0.05)
60# Paper2 2.0 (0.05)
60# Paper2 3.6 (0.09)
60# Paper2 3.6 (0.09)
60# Paper2 3.6 (0.09)
0.200 (5.1)0.400 (10.2)0.380 (9.7)0.312 (7.9) 0.150 (3.8)0.660 (16.8)
0.098 (2.5)0.125 (3.1)
0.230 (5.8)0.300 (7.6)0.520 (13.2)
Width in. (mm)
707075
22
22
55
55
55
7070707570
7070
707070
Versatile foot style for use on high-energy surfaces.Flat top, nonskid for appliances and electronics.Universal color matching. Nonslip. Ideal for picture framing.
UL94HBrecognized.
UL94HBrecognized.
Fast bonding, permanent adhesion.UL94HBrecognized.
Fast bonding, permanent adhesion.UL94HBrecognized.
Fast bonding, permanent adhesion.UL94HBrecognized.
Good energy absorption on impact.Protects wall from door knob.Recessed center, like screw-in bumper.Cushions heaver items like glass or liftgate.Smaller, energy absorbing with small contact point.Large, ideal for door stops.
Nested on pad for fast removal.Popular, thin nonskid for appliances or electronics.
Larger height, smaller top surface for heat dissipation.For larger appliances and electronics.Larger, high profile for heat dissipation.
Comments
Comments
Height in. (mm)
Liner Type and Type Thickness mils (mm)
Adhesive Type andThickness mils (mm)
Product HardnessASTM D-2240
Hardness (Shore A)
Adhesion in Steeloz./0.5in.
Cylindrical
5800 Series
6200 Series
3M™ Surface Protection Solutions
TRANSPARENT
CLEAR
HEMISPHERE
CYLINDRICAL
SQUARE
HEXAGON
Hemisphere
Square
Molded Shapes
Polyurethane Rollstock
42
3M™ Clean-Walk Mats
3M™ Protective Tapes – Short Term
Capture dirt on contact before tracking it from one area to another
Between areas within a plant or between the plant and the office these adhesive mats capture dirt on contact from shoe soles, wheels, and other passing objects.
•Individuallytabbedsheetsremoveeasilyto expose a fresh sheet•Individuallynumberedsheetsensureone sheet removal at a time•Largeadhesiveareaallowstwofullsteps
Unframed mats adhere to most smooth, clean anddryfloorssuchastileorconcrete.Removescleanly.
Framed mats are adhered to a plastic frame. Frame’s nonskid back maintains position on carpet and other surfaces. Replacement pads/mats install easily to the reusable frame.
Short-term protection against scratching, marring, chipping, abrasion, and UV
These rugged 1 to 5 mil tapes adhere and conform to protect product surfaces during production, packaging, shipping and installation. Tack level varies depending on the tape. All remove cleanly once the product is in the hands of the end user.
A variety of backings are available and each offers key characteristics:
Polyethylene Tapes•Transparentwithgoodabrasionresistance•Cost-effective
UV Tapes•Transparentorbluewithenhancedoutdoor UV resistance
Carpet Tapes•Transparentwitheasyunwind
Cold Seal®* Tapes•Clearfilmsealstoitselfforpackagingsmall parts
Co-Extruded “A” Tapes•Punctureresistanceandbreakstrength surpass many typical LDPE films
Co-Extruded Black/White Tapes•UVresistanceupto6monthsPolyesterTapes•Bestchoiceforclaritywithexcellentheatand puncture resistance
Polypropylene Tapes•Goodresistancetoheat,abrasion,andUV
Topreservethecleanlinessandappearanceoffloorsandcarpets,3M™Clean-WalkMatsreducetheamountofdirtpassing between areas.
During manufacturing and transport, transparent 3M™ Polyethylene Protective Tapes protect many finished automotive interior surfaces from abrasion, nicks, and scratches. Clear acrylic adhesive holds with very low tack for easy removal.
To help ensure a scratch-free surface for the end user, 3M™ Co-Extruded “A” Tape is applied after final finishing to sinks, spas, and countertops prior to packaging. Enhanced abrasion and puncture resistance protects the surface through shipping and installation. Tape then removes cleanly.
Unframed Mats
Framed Mats
3M™ Surface Protection Solutions
43
3M™ Protective Tapes – Short Term
2 (0.05)2 (0.05)3 (0.08)
3 (0.08)
4 (0.10)5 (0.13)
Product
210421263112
3125
41675112
4F794F94
31U26C/UV
2E93EZ
240425A10
44S56W
Tape Structure(Backing/Adhesive)
Polyethylene/AcrylicPolyethylene/AcrylicPolyethylene/Acrylic
Polyethylene/Acrylic
Polyethylene/AcrylicPolyethylene/Acrylic
Total Thicknessmils (mm)
Adhesion to Steel oz./in.width
173
5
183
1520
7
25
12
9
Very lowModerate
Low
Moderate
HighLow
Moderate
Very high
Very lowVery low
Moderate
HighHigh
450450450
450
450450
600600
450
600
600600
800
Tack Level
Glass. CRT screens. LED, LCD screens.Slightly textured plastics, steel garage doors, metal extrusions and painted building panels.Smooth, gloss, painted building panels.Premask for vinyl pinstriping, decals and emblems.Cut-to-length metal sheets in fabrication, shipping and storage.Semi-gloss, painted metals and plastic surfaces.Textured decorative laminates and vinyl. Woodgrain laminates, matte plastics.Mirror-finishstainless,specularanodizedaluminum.Automotive applications such as: paint mutilation, tail lights, lens covers and window glass.
Elongation at Break %
Application Ideas
Based on ASTM Test Method: D-3652 D-3330 D-3759
Polyethylene Tapes
Nominal Results
4 (0.10)4 (0.10)
3 (0.08)
2 (0.05)
2 (0.05)3 (0.08)
4 (0.10)
Polyethylene/AcrylicPolyethylene/Acrylic
Polyethylene/Acrylic
Polyethylene/Acrylic
Polyethylene/Acrylic
Co-Extruded/AcrylicCo-Extruded/Acrylic
Flame retardant carpet tape complies to F.A.R. 25.853 (appendix F, part 25).Flame retardant carpet tape complies with IMO resolution A-653 (16) for cruise lines.
Forflatfinishedvinylandaluminumwindowframes,flatfinishedpaintedmetalsandplastics.
Automotive carpets, fabric seals and headliners.
High-gloss coated metals, glass, CRT screens.Specularanodizedaluminum.Brightannealedorpolishedstainless.
White tape for painted metals, plastic surfaces and automotive clearcoat paint finishes.
Retardant Tapes
UV Tapes
Selected tapes are available in transparent, blue, white and black/white.** Value measured as a cohesive bond strength in units. Note:This technical information and data should be considered representative or typical only and should not be used for specification purposes.
Product Information:
Covered with 3M™ UV Protective Tape, plastic surfaces such as refrigerator dairy doors or vegetable crispers stay new looking through transit and display in the store.
3M™ Protective Tape applied to the metal control panel of a stove protects the paint against abrasion, scratches, and dirt during subsequent assembly steps, warehousing, and shipping.
3M™ UV Protective Tapes protect automotive mirror finishes from abrasion and marring. UV-stable backing resists the effect of UV exposure for up to 3 months.
Applied over automotive lights, 3M™ Co-Extruded Black/White Tapes offer UV resistance for up to 6 months while protecting the glass and other surfaces from abrasion and scratching
Carpet Tapes
Co-Extruded “A” Tapes
Polypropylene Tapes
3M™ Surface Protection Solutions
44
Selection simplicity for a wide variety of applications
With more than 120 product solutions, the portfolio of 3M™ Specialty Tapes presents customers with numerous characteristics to evaluate in making the optimum choice for an application.
To help simplify and streamline the selection process, six products have been highlighted for their versatility. These Specialty Six solve 80% of customer application needs. The six represent the key backings that comprise much of the 3M™ Specialty Tapes line: glass cloth, metal foil, polyester, slick surface (PTFE), and vinyl.
Primary Customer Applications Key ProductKey Product Solutions
3M™ Polyester Tape 850
3M™ Aluminum Foil Tape 425
3M™ Polyester Tape 850
3M™ Polyester Tape 850
3M™ Glass Cloth Tape 361
3M™ Glass Cloth Tape 361
3M™ Damping Foil 2552
3M™ Vinyl Tape 471
3M™ PTFE Film Tape 5490
3M™ Vinyl Tape 471
3M™ PTFE Film Tape 5490
3M™ PTFE Film Tape 5490
3M™ Aluminum Foil Tape 425
Shielding 3M™ Aluminum Foil Tape 425
3M™ Vinyl Tape 471
SplicingReliably hold a seam together between two materials.
SealingReliably seal surfaces in many special or
unique applications.
EnhancingMark for color-coding, safety, or aesthetics to
enhance the workplace.
ShieldingShield sensitive surfaces from harsh chemicals,
and heat or cold.
ConductingEffectively conduct heat or cold from
one surface to another.
Reducing noiseMinimizethenoiseofvibrationorsurfaces
hitting or rubbing against each other.
3M™ Specialty Tapes
3M Specialty Solutions
45
Product Information:
Vinyl Tapes
Aluminum Foil Tapes
Polyester Tapes
Slick Surface Tapes
Damping Foils
Glass Cloth Tapes
• Easilyapplycolor-coding,markings,andidentificationtoaisles,lanes,hazardareas,
tools, and equipment
• “Colorthroughout”constructionresistsscrapes,wear,andchemicals
•Finelinepaintmasking
•Protectsurfacesagainstabrasionandchemicals
• Adddecorativetrimthatalsoreinforcesandseals
• Splicewithhighvisibility
• Sealrivetedseams
•Highthermalconductivityenhancesefficiencyofheatingorcooling
•Highheatreflectivitytoprotecttemperaturesensitivematerialsagainstheatdamageandhotspots
•Protectpartsfromflamedamage
•Sealandprotectfromdustandmoisture
•Solventresistanttosealandprotectsensitivesurfaces
•ResistUVdegradationforlong-termperformance
•Makebuttandothersplicesthatrequirehightensilestrengthandthincaliper
•Seal,protect,andreinforceinawidevarietyofapplications
•Color-codeordecoratewithlong-termholding
•Transparencywithcleanremovalandlong-termclarity
•Broadtemperaturerange
•Lowcoefficientoffrictionforaslippery,self-lubricatingsurface
•Wrapwebrollerswithaslippery,lowenergysurfaceforsmoothermaterialmovement
•Coverwebformeredgestominimizefrictionduringfolding
•Antistickforreadyreleaseandcleanupofhotplastic;preventplasticfilmfromstickingtoheatbar
•Protectsurfacesagainstheat,chemicals,andfriction
•Reducestructure-bornenoiseinmetalandcompositepanelsandsupportstructures
•Reducevibrationalfatiguetodecreasewearandtearonpartsandlowertheriskofpart
loosening and displacement
•Convertsvibrationalenergytonegligibleheatthatreadilydissipates
•Pressuresensitiveforeasyapplication
•Eliminatestiffenersinsomedesigns
•Effectivelydampwithaslittleas10%surfacecoverage
•Tensilestrength7xhigherthantypicalpolyestertapes
•Protectsurfacesagainstabrasionandhightemperatures
•Thermalspraymasking
•Splicefabricandothertexturedsurfaceswhenhightensilestrengthisnecessary
•ProtectagainsthightemperaturetopassFAAflameresistanceregulations
4
6
3
2
5
13M™
Vinyl Tape 471
3M™Aluminum Foil
Tape 425
3M™Polyester Film
Tape 850
3M™PTFE Film Tape
5490
3M™Damping Foil
2552
3M™Glass Cloth Tape
361
3M Specialty Solutions
46
Forseamingandsealingpanelsinaircraftcargobays,3M™GlassClothTape398FRexceedsflameretardantstandardsF.A.R.25.853 (a) and F.A.R. 25.855 (d). Pressure sensitive acrylic adhesive bonds on contact to many surfaces. High adhesion is secure for extended periods. Rugged cloth surface resists wear from heavy bags.
High tensile strength with choice of other properties
With a choice of high tensile strength glass cloth and silicone, acrylic, or rubber adhesives, this line meets demanding applications for Aerospace, Automotive, Commercial Vehicle, Construction, Marine, and more.
Depending on the specific tape, you have achoice of characteristics:
•PassFAAflameresistanceregulations•Protectsurfacesagainstabrasion•Temperatureresistanceuptomorethan 450°F (232°C) for one hour – even higher for intermittent exposures
3M™ Traction Tape 5401 enhances friction on web rollers to help maintain constant traction and tension for the web material from start-up through wind-up.
With high tensile strength and rubber adhesive, 3M™ Glass Cloth Tape 365 reliably splices fabrics and other textured surfaces.
For thermal spray and plasma spray masking, 3M™ Glass Cloth Tape 361 with silicone adhesive performs reliably at up to450°F(232°C).PassesFAAflameresistanceregulations.
1 F.A.R. 25.853(a) 2 F.A.R. 25.855(d) Note: This technical information and data should be considered representative or typical only and should not be used for specification purposes.
Product Information:
TemperatureRange°F (°C)
ProductColor
361/White
398FR/White
398FRP/White
5401/Tan
Glass Cloth/Silicone
Glass Cloth/Acrylic(Film Liner)
Glass Cloth/Acrylic(Film Liner)
Fiberglass ReinforcedSilicone/Silicone
5.4 (0.14)
5.0 (0.13)
5.0 (0.13)
8 (0.2)
7.5 (0.19)
7.0 (0.18)
7.0 (0.18)
9.3 (0.24)
38 (42)
38 (52)
38 (52)
12 (13)
182 (3190)
130 (2452)
130 (2452)
220 (3853)
10
7
7
7
-65 to 450°F(-54 to 232°C)
-20 to 250°F(-29 to 121°C)
-20 to 250°F(-29 to 121°C)
Up to 300°F
General purpose glass cloth tape.1
Meets F.A.A. burn requirements. 1, 2
Skip-slit liner for case at application.
Printed backing version of 398FR tape.1, 2
Non-stick traction surface.(150°C)
Tape Structure(Backing/Adhesive)
BackingThicknessmils (mm)
CommentsTotalThicknessmils (mm)
Adhesionto Steeloz./in.(N/100 mm)
TensileStrengthlbs./in.(N/100 mm)
Elongationat Break %
Glass Cloth Tapes
ASTM Test Method: D-3652 D-3652 D-3330 D-3759 D-3759
3M™ Glass Cloth Tapes
3M Specialty Solutions
47
3M™ Metal Foil Tapes
3M™ Aluminum Foil Tape bonds on contact as heat shielding inside an oven door. Helps keep the exterior cool to the touch behind the handle and around the window perimeter.
Choice of high performancefoil tapes
With a choice of conformable backings and adhesives, this line of tapes meets demanding applications in Aerospace, Appliance, Transportation, Construction, Automotive, and MRO (Maintenance and Repair) segments.
3M™ Aluminum Foil Tapes•Resistflame,moisture,weather,UV degradation, and most chemicals•Thermallyconductiveforheating/cooling efficiency•Heatandlightreflective
3M™ Aluminum Foil Reinforced Tapes•Flexibleflame-resistantwrapfor wires and hoses•Longwearing,tearandpunctureresistant•Flameandheatresistant
3M™ Lead Foil Tapes•Electricallyconductive•Acidresistantforplatingmasking•RadiopaqueforX-raymarkers
With aggressive adhesive and dead soft aluminum, Scotch® Foil Tape 3311 seals and secures seams and joints for long-term durability. UL 723 Listed for duct sealing and general repairs.
With conformability and chemical resistance, 3M™ Aluminum Foil Tapes protect aircraft windows during harsh chemical paint stripping.
3M™ FSK Facing Tape 3320 is engineered specifically as a vapor retardant tape to seal mineral wool foil-faced insulation, bare sheet metal ducts, and blanket style fiberglass duct insulation.
3M Specialty Solutions
1 Can be qualified to L-T-80B, SAE-AMS-T-23397 2 Meets U.L.723,Class L File R 7311 3 F.A.R.25.853 (a) 4 Meets U.L.746C File E122798Note: This technical information and data should be considered representative or typical only and should not be used for specification purposes.
HVAC & Refrigeration Aluminum Foil Tapes
Lead Foil Tapes
420
421
Lead/Rubber
Lead/Rubber
4.7 (0.12)
4.0 (0.10)
6.8 (0.17)
6.3 (0.16)
45 (49)
31 (34)
20 (350)
15 (263)
12
14
-60 to 225°F(-54 to 106°C)
-60 to 225°F(-54 to 106°C)
Linered plating tape.
Unlinered plating tape.
Product Information:
TemperatureRange°F (°C)
ProductColor
425
427
433
3311
Aluminum/Acrylic
Aluminum/Acrylic
Aluminum/Silicone
Aluminum/Rubber
2.8 (0.07)
2.8 (0.07)
2.0 (0.05)
2.0 (0.05)
4.6 (0.12)
4.6 (0.12)
3.6 (0.09)
3.6 (0.09)
47 (51)
50 (55)
40 (43.8)
90 (98)
30 (525)
30 (525)
20 (350)
17 (298)
8
8
3.5
3
-65 to 300°F(-54 to 149°C)
-65 to 300°F(-54 to 149°C)
-65 to 600°F(-54 to 316°C)
-10 to 180°F(-23 to 82°C)
Most versatile aluminum tape.1, 2, 3, 4
Linered version 425 tape. 2, 3, 4
MIL-T-47014.3
UL 723 listed, linered.
Tape Structure(Backing/Adhesive)
BackingThicknessmils (mm)
CommentsTotalThicknessmils (mm)
Adhesionto Steeloz./in.(N/100 mm)
TensileStrengthlbs./in.(N/100 mm)
Elongationat Break %
Premium Performance Aluminum Foil Tapes
ASTM Test Method: D-3652 D-3652 D-3330 D-3759 D-3759
48
For butt splices on many low surface energy materials such as polyethylene. 3M™ Super Bond Film Tape 396 provides the thin caliper, and tensile strength of polyester and high immediate adhesion and holding strength of rubber adhesive.
Thin caliper with long-term high dimensional strength
With a choice of thin backing calipers and adhesives, this line of tapes meets demanding applications for Graphic Arts, Photography, Metal Finishing, and Electronics. Applications range from splicing silicone-treated paper to low profile decorative trim.
•Backingcalipersfromasthinas0.9milup to 5 mils, all with very high dimensional strength
•Tensilestrengthsrangingfrom20lbs./in. (0.9 mil) to 150 lbs./in. (5 mils) – some of the strongest backings available
•Pressuresensitiveacrylic,rubber,silicone, and S/R blend adhesives to meet specific requirements. For example, acrylic with transparent backing for clarity and long-term holding;siliconeforhightemperaturesand cleanremoval;rubberforplatingchemical resistance
For marking splice location, 3M™ Polyester Tape 850 is available in red, black, white, silver, and gold. Transparent is also available to blend with the web stock. Pressure sensitive acrylic adhesive grabs on contact and holds butt splices securely. High tensile strength backing resists web handling stresses.
With thin caliper, high tensile strength polyester backing and the excellent shear strength of silicone adhesive, 3M™ Polyester Tape 8402 works well for butt splicing silicone-treated papers
3M™ Polyester Tapes
3M Specialty Solutions
1L-T-100B 2A-A-59298 3F.A.R. 25.853 (a) Note: This technical information and data should be considered representative or typical only and should not be used for specification purposes.
Product Information:
TemperatureRange°F (°C)
ProductColor
396/Transparent
850/Transparent
850/White/Red/Blk
853/Transparent
Polyester/Rubber
Polyester/Acrylic
Polyester/Acrylic
Polyester/Acrylic
1.4 (0.04)
0.9 (0.02)
0.9 (0.02)
0.9 (0.02)
4.1 (0.10)
1.9 (0.05)
1.9 (0.05)
1.9 (0.05)
170 (190)
30 (33)
30 (33)
48 (52)
22 (24)
24 (26)
27 (30)
32 (35)
40 (44)
43 (47)
30 (33)
30 (33)
40 (44)
33 (36)
34 (595)
33 (578)
44 (772)
28 (490)
53 (928)
150 (2627)
30 (525)
30 (525)
55 (963)
48 (840)
100
120
150
115
130
130
100
100
110
83
43 (753)
25 (440)
28 (491)
24 (421)
140
120
120
102
40 to 200°F(4 to 93°C)-60 to 300°F(-50 to 150°C)-60 to 300°F(-50 to 150°C)-60 to 300°F(-50 to 150°C)
-60 to 300°F(-50 to 150°C)
-60 to 425°F(-50 to 218°C)
-60 to 425°F(-50 to 218°C)
-60 to 400°F(-50 to 204°C)
-60 to 400°F(-50 to 204°C)
-60 to 400°F(-50 to 204°C)
-60 to 400°F(-50 to 204°C)
-60 to 425°F(-50 to 218°C)
-60 to 425°F(-50 to 218°C)
-60 to 400°F(-50 to 204°C)
Adhesion to low energy surfaces.
Splicing, holding, sealing, highly transparent.3
Splicing, holding, decorating, color-coding, sealing.Solvent resistant adhesive.1, 2, 3
Splicing many release coated papers.
Adheres well to silicone.
Adheres well to silicone.
High temperature coating.
High temperature coating.
High temperature coating.
High temperature label protection.
High temperature applications.
High temperature applications.
Powder coat masking, economical high temperature applications.
Tape Structure(Backing/Adhesive)
BackingThicknessmils (mm)
CommentsTotalThicknessmils (mm)
Adhesionto Steeloz./in.(N/100 mm)
TensileStrengthlbs./in.(N/100 mm)
Elongationat Break %
General Industrial Tapes
ASTM Test Method: D-3652 D-3652 D-3330 D-3759 D-3759
Release Surface and Liner Splicing Tapes
8401/TranslucentCream
8402/Green
8403/Green
8901/Blue
8902/Blue
8905/Blue
8911/Transparent
8951/Blue
8952/8952L/Blue
8992/8992L/Green
Polyester/Siliconewith Rubber
Polyester/Silicone
Polyester/Silicone
Polyester/Silicone
Polyester/Silicone
Polyester/Silicone
Polyester/Silicone
Polyester/Silicone
Polyester/Silicone
Polyester/Silicone
1.0 (0.03)
0.9 (0.02)
1.5 (0.04)
0.9 (0.02)
2.0 (0.05)
5.0 (0.13)
1.0 (0.03)
1.0 (0.03)
2.0 (0.05)
2.0 (0.05)
1.9 (0.05)
1.8 (0.05)
2.3 (0.06)
2.6 (0.06)
3.4 (0.09)
6.5 (0.17)
2.7 (0.07)
2.7 (0.07)
3.5 (0.09)
3.3 (0.08)
49
3M™ Slick Surface Tapes
Corrugated boxes slide more easily down a chute lined with abrasion-resistant 3M™ UHMW-PE Tapes.
Low coefficients of friction withchoice of other characteristics
3M™ Slick Surface Tapes meet many applica-tion requirements for Printing, Aerospace, Auto-motive, and MRO (Maintenance and Repair).
3M™ PTFE Tapes•Self-lubricatingwithlowcoefficientoffriction to help improve web processing•Resistsupto400°F(204°C)forlong performance on heat sealing machines•Anti-stickforeasycleanupofhotplastic•Chemical-resistantbarrier•Silicone-freeadhesiveavailable
3M™ UHMW-PE Tapes•Abrasionresistanttoprotectchutes,guide rails, and containers from wear•Lowcoefficientoffrictionfor“slipplane” effect between surfaces to reduce noise•Anti-stickforreadyreleaseofmanyinksand adhesives
Conformable, self-lubricating 3M™ PTFE Tape 5480 helps the movement of web materials in many types of roller wrapping applications
For automotive noise reduction, 3M™ UHMW-PE Tape 5425 provides a “slip plane” effect between incompatible surfaces to help reduce squeaks and rattles.
In shrink wrapping operation, 3M™ PTFE Glass Cloth Tape 5451 helps protect the bar underneath where the hot wire seals the plastic film.
Note: All UHMW-PE tapes come on a paper liner. Note:This technical information and data should be considered representative or typical only and should not be used for specification purposes.
Product Information:
TemperatureRange°F (°C)
ProductColor
5151/Lt.Brown
5153/Lt.Brown
5451/Brown
5453/Brown
5180/Gray
5181/Gray
5480/Gray
5481/Gray
5490/Gray
5491/Gray
5498/Brown
PTFE GC/Silicone
PTFE GC/Silicone
PTFE GC/Silicone
PTFE GC/Silicone
PTFE/Silicone
PTFE/Silicone
PTFE/Silicone
PTFE/Silicone
PTFE/Silicone
PTFE/Silicone
PTFE/Rubber
3.0 (0.08)
5.3 (0.13)
3.2 (0.08)
6.0 (0.15)
2.0 (0.05)
5.0 (0.13)
2.0 (0.05)
5.0 (0.13)
2.0 (0.05)
5.0 (0.13)
2.0 (0.05)
4.5 (0.11)
6.8 (0.17)
5.6 (0.14)
8.2 (0.21)
3.5 (0.09)
6.5 (0.17)
3.7 (0.09)
6.8 (0.17)
3.7 (0.09)
6.7 (0.17)
4.0 (0.10)
30 (33)
35 (38)
28 (30.6)
55 (56)
25 (28)
35 (39)
20 (22)
32 (35)
27 (29)
35 (38)
48 (53)
100 (1760)
150 (2600)
100 (1760)
175 (3065)
30 (525)
75 (1300)
27 (473)
49 (858)
22 (385)
40 (700)
19 (332)
5
5
5
5
100
100
140
335
150
200
105
-100 to 400°F (-73 to 204°C)
-100 to 400°F (-73 to 204°C)
-100 to 400°F (-73 to 204°C)
-100 to 400°F (-73 to 204°C)
Tape Structure(Backing/Adhesive)
BackingThicknessmils (mm)
CommentsTotalThicknessmils (mm)
Adhesionto Steeloz./in.(N/100 mm)
TensileStrengthlbs./in.(N/100 mm)
Elongationat Break %
PTFE Tapes (Polytetrafluoroethylene)
Glass Cloth
Skived Film
Extruded Film
ASTM Test Method: D-3652 D-3652 D-3330 D-3759 D-3759
-65 to 400°F (-54 to 204°C)
-65 to 400°F (-54 to 204°C)
-65 to 400°F (-54 to 204°C)
-65 to 400°F (-54 to 204°C)
-65 to 400°F (-54 to 204°C)
-65 to 400°F (-54 to 204°C)
40 to 300°F (4 to 149°C)
General purpose.
General purpose.
Roller wrapping tape.
Heavy-duty roller wrapping tape.
Lay-flatbacking.
Lay-flatbacking.
Silicone-free adhesive.
275
300
100
175
175
175
General purpose.
General purpose.
Heat seal tape.
Heat seal tape.
Film
UHMW-PE Tapes (Ultra High Molecular Weight — Polyethylene)
6.7 (0.17)
11.7 (0.30)
4.5 (0.11)
7.0 (0.18)
6.5 (0.17)
5.0 (0.13)
26 (28)
26 (28)
30 (33)
75 (82)
75 (82)
50 (55)
30 (526)
55 (963)
45 (788)
40 (696)
40 (696)
40 (696)
-30 to 225°F (-34 to 107°C)
-30 to 225°F (-34 to 107°C)
-30 to 225°F (-34 to 107°C)
-30 to 225°F (-34 to 107°C)
-30 to 225°F (-34 to 107°C)
-30 to 225°F (-34 to 107°C)
General purpose tape.
Excellent abrasion resistance.
Solvent resistant adhesive.
High tack adhesive.
Black version 5430 tape.
Thin version 5430 tape.
5.0 (0.13)
10.0 (0.25)
3.0 (0.08)
5.0 (0.13)
5.0 (0.13)
3.0 (0.08)
5421/Transparent
5423/Translucent
5425/Transparent
5430/Transparent
9324/Black
9325/Transparent
UHMW-PE/Rubber
UHMW-PE/Rubber
UHMW-PE/Acrylic
UHMW-PE/Acrylic
UHMW-PE/Acrylic
UHMW-PE/Acrylic
3M Specialty Solutions
50
3M™ Vinyl and Polyethylene TapesMark, identify, color-code,seal seams, and more
These rugged tapes adhere aggressively and remove cleanly from most surfaces for a wide variety of applications in Automotive, MRO (Maintenance and Repair), Construction, Marine, Commercial Vehicle, and other industries.
Applicationsincludemarkinghazardsandaisles, color-code piping, fine line paint masking, decorative trim, high visibility splicing, and more.
•“Colorthroughout”constructionresists scrapes, wear, weathering, and chemicals
•Widevarietyofcolorsplustransparent
•Flexiblebackingwithaggressiveadhesive bonds, conforms, and seals even with irregular surfaces
•Removescleanlywithoutleavingadhesive behind to clean up
•Stretchestomoldtocontours
Product Information:
TemperatureRange°F (°C)
ProductColor
471/Various
471+/Indigo
4712/Various
472/Black
5700/Black and White Stripes
5702/Black andYellow Stripes
766/Black and Yellow Stripes
767/Red and White Stripes
470/Tan
484/Tan
764/Various
Vinyl/Rubber
Vinyl/Rubber
Vinyl/Rubber
Vinyl/Rubber
Vinyl/Rubber
Vinyl/Rubber
Vinyl/Rubber
Vinyl/Rubber
Vinyl/Rubber
Vinyl/Rubber
Vinyl/Rubber
4.1 (0.10)
4.1 (0.10)
4.1 (0.10)
9.0 (0.23)
4.2 (0.11)
4.2 (0.11)
4.0 (0.10)
4.0 (0.10)
6.3 (0.16)
5.7 (0.14)
4.1 (0.10)
5.2 (0.13)
5.3 (0.13)
5.3 (0.13)
10.4 (0.26)
5.5 (0.14)
5.4 (0.14)
5.0 (0.125)
5.0 (0.125)
7.1 (0.18)
7.2 (0.18)
5.0 (0.125)
23 (25)
35 (38)
34 (37)
23 (25)
19 (21)
19 (21)
18 (21)
18 (21)
26 (28)
20 (22)
18 (21)
16 (280)
14 (243)
16 (280)
32 (560)
15 (260)
15 (260)
13 (228)
13 (228)
20 (350)
20 (350)
13 (228)
130
191
190
270
170
170
180
180
180
220
180
40 to 170°F (4 to 77°C)
Up to 250°F (121°C)
40 to 170°F (4 to 77°C)
Up to 225°F (107°C)
40 to 170°F (4 to 77°C)
40 to 170°F (4 to 77°C)
60 to 85°F (15 to 27°C)
60 to 85°F (15 to 27°C)
Up to 170°F (77°C)
Up to 170°F (77°C)
60 to 85°F (15 to 27°C)
Tape Structure(Backing/Adhesive)
BackingThicknessmils (mm)
CommentsTotalThicknessmils (mm)
Adhesionto Steeloz./in.(N/100 mm)
TensileStrengthlbs./in.(N/100 mm)
Elongationat Break %
Premium Performance Vinyl Tapes
Hazard Identification Tapes — Premium Performance Permanent
Hazard Identification Tapes — General Performance Temporary
Electroplating and Anodizing
General Purpose Vinyl Tapes
ASTM Test Method: D-3652 D-3652 D-3330 D-3759 D-3759
Conformable and clean removal.Black, Blue, Brown, Green, Orange, Purple, Red, Transparent, White, Yellow.
Superior conformability, sharp paint line, clean removal.
Linered version of 471.42# premium paper liner.
Abrasion resistant.High temperature resistant.
Adhesive side printing.Critical applications.
Adhesive side printing.Critical applications.
Non-critical applications.
Non-critical applications.
Chemical resistance.1
Lower adhesion than 470 Tape.
Non-critical applications.Black, Blue, Brown, Gray, Green, Orange, Purple, Red, Transparent, White, Yellow.
For fine line paint masking, 3M™ Vinyl Tape 471 provides sharp paint lines and the clean removal of a firm rubber adhesive.
For color-coding pipes with 3M™ Vinyl Tapes, select from either nine vivid colors or transparent to let underlying color show through. Backing is colored throughout to help maintain ready visibility.
3M™VinylTapesclearlymarklanes,corridorsandhazardousor no-go areas in factories, warehouses, and hospitals. Durable vinyl backing resists abrasion, scuffing, moisture, weathering, acids, and alkaline chemicals for long service life.
To highlight low hanging objects, protruding equipment, or steps, 3M™ Vinyl Tape 5702 combines yellow and black for a striped combination that calls for attention.
1HH-T-0025, Amend 2 2 MIL-T-22085 Amend 3, Type IVNote: This technical information and data should be considered representative or typical only and should not be used for specification purposes.
3M Specialty Solutions
51
1Viscoelastic polymer 2 Optimum damping temperature 3 The specimen passed the requirements of FAR 25.853 (a)(1)(ii) per AMDT.25-83 tested in composite on aluminum backer.Note: This technical information and data should be considered representative or typical only and should not be used for specification purposes.
1HH-T-0025, Amend 2 2 MIL-T-22085 Amend 3, Type IVNote: This technical information and data should be considered representative or typical only and should not be used for specification purposes.
3M™ Sound Damping Foils
3M™ Damping Foil 435 between the ribs and stringers of an aircraft fuselage helps reduce vibrational fatigue and noise inside the passenger cabin.
Reduce noise and vibration in many applications
With pressure sensitive viscoelastic acrylic polymer on dead soft aluminum foil, 3M™ Sound Damping Foils quiet noise and reduce vibration in many areas for Aerospace, Automotive, Appliances, Construction, and MRO (Maintenance and Repair).
•Reducestructure-bornenoiseinmetaland composite panels and support structures
•Optimizedacrylicconvertsvibrationalenergy to negligible heat that readily dissipates
•Reducevibrationalfatiguetodecreasewear and tear on parts and lower the risk of part loosening and displacement
•Effectivedampingwithaslittleas10% surface coverage
•Pressuresensitiveforeasyself-fixturing application
•Longagingperformance
•Goodperformanceoverawide temperature range
•Lineredconstructionprovidesabilityto die-cut product
Applied with a 3M™ PA-1 Wiper to the inside of a car door, 3M™ Damping Foil 2552 effectively damps noise and vibration with aslittleas10%surfacecoverage.Optimizedacryliconadeadsoftaluminumconstraininglayerconvertsvibrationalenergytonegligible heat that readily dissipates.
3M™ Damping Foil 2552 on the inside of a washing machine reduces structure-borne noise and reduces vibrational fatigue to decrease the risk of part loosening and displacement.
Product Information:
Product Information:
TemperatureRange°F (°C)
TemperatureRange°F (°C)
ProductColor
ProductColor
2552/Silver
480/Transparent
481/Black
4811/White
483/Various
Aluminum/VEP1
Polyethylene/ AcrylicPolyethylene/ RubberPolyethylene/ RubberPolyethylene/ Rubber
10.0 (0.25)
3.8 (0.10)
7.7 (0.20)
7.5 (0.18)
3.9 (0.10)
15 (0.38)
5.1 (0.13)
9.8 (0.25)
9.5 (0.24)
5.3 (0.13)
65 (72)
22 (24)
32 (35)
30 (36)
12 (13)
80 (1400)
10 (180)
15 (260)
15 (260)
11 (190)
15
277
510
490
240
-25 to 175°F (-32 to 80°C)2
20 to 170°F (-7 to 77°C)
20 to 170°F (-7 to 77°C)
Up to 170°F (77°C)
Up to 170°F (77°C)
Tape Structure(Backing/Adhesive)
Tape Structure(Backing/Adhesive)
BackingThicknessmils (mm)
BackingThicknessmils (mm)
Comments
Comments
TotalThicknessmils (mm)
TotalThicknessmils (mm)
Adhesionto Steeloz./in.(N/100 mm)
Adhesionto Steeloz./in.(N/100 mm)
TensileStrengthlbs./in.(N/100 mm)
TensileStrengthlbs./in.(N/100 mm)
Elongationat Break %
Elongationat Break %
Damping Foils
ASTM Test Method:
ASTM Test Method:
D-3652
D-3652
D-3652 D-3330
D-3330
D-3759
D-3759
D-3759
D-3759
General purpose vibration damping3
Acrylic adhesive.
Preservation sealing tape.2
Preservation sealing tape.
Black, Blue, Green, Red, Transparent, White, Yellow
3M Specialty Solutions
Polyethylene Tapes
D-3652
52
3.83.13.83.13.13.12.84.12.8
3M™ Performance Label MaterialsTechnology and capability foridentifying, informing, tracking,warning, protecting, and securing.
With 3M adhesives, topcoats, facestocks and liners, you can mix and match to achieve about 150,000 combinations. That means technology and solutions for most labeling requirements for notebook and desktop computers, printers, peripherals, mobile phones, and more. 3M also helps you put that technology to work just about anywhere in the world with global service, expertise, and a customer-focused attitude.
ComprehensivelistingofULrecognizedand RoHS compliants labels.
3M™ Performance Label Materials with Structured Adhesive – With unique microchannelsthroughoutthestructuredadhesive,airflowsfreelyfrombetweenthe label adhesive and substrate. Hand-applied large labels go on smoothly and stay that way permanently without unsightly wrinkles and bubbles.
Application
Certification, Instruction, or Warning Label
Identification andInformation Label
Thermal transfer printable, with adhesion to difficult surfaces for life of the product.
Cost effective thermal transfer printable, with adhesion to many surfaces for life of the product.
Thermal Transfer Polyester with High Holding Adhesive 350
Thermal Transfer Polyester with High Structured Adhesive 350 for bubble-free lamination
Thermal Transfer Polyester with High Precision Adhesive 310
787178687872
7220SA7214SA
7815781678187875
Unique Application Needs ColorProduct Family/Description Product Thickness (Face/Adhesive only)
mils
Identifying/Informing/Warning
Gloss whiteGloss whiteMatte platinumGloss whiteBrushed SilverMatte whiteGloss whiteMatte silverPlatinum
4.04.03.03.2
3.63.6
3.03.02.9
2.92.92.8
3.0
2.0
2.8
2.8
1.8
2.1
1.0
Ultra clear
Gloss clear
Clear
Gloss clear
Matte clear
Gloss clear
PCB TrackingLabel
Laser MarkableLabel Material
Tamper indicatingLabel
Masking
Overlaminate
Barcode printable with high temperature resistance. Survives solder processing.
High temperature resistance. Thermal transfer printable.
Laser etchable film, durable label construction May be suitable for DoD UID - A “unique identifier” containing data elements used to track Department of Defense parts through their life cycles.
Tamper indicating stocks designed to provide a “void” message in the facestock when removal is attempted.
Tamper indicating material designed to provide triangle pattern when removal is attempted.Tamper evident material destructs if attempts are made to remove from substrate. Thermal transfer printable.Tamper evident material destructs if attempts are made to remove from substrate. Dot matrix printable.
Ultra clear, printable label material for lens protection applications. Low tack adhesive with clean removability.
High tack adhesive with ultra clean removal.
Protects surface of label from abrasion, sunlight, chemicals, or moisture. Film liner offers excellent graphic appearance.
High Temperature Polyimide (Kapton™) with High Temp Adhesive 100
High Temperature Acrylate with High Temp Adhesive 150
Laser Etch Acrylate with High Holding Adhesive 350
VOID Tamper Indicating Polyester with High Holding Adhesive 350
VOID Tamper Indicating Polyester with Tackified Adhesive P1410
Triangle Tamper Indicating Polyester with Tackified Adhesive P1410Destructible Vinyl with High Holding Adhesive 350Destructible Vinyl with High Holding Adhesive 200
Highly Transparent Polyester with Removable Adhesive
Thermal Transfer Polyester with Ultra Removable Adhesive R3500Press Printable Polypropylene with Ultra Removable Adhesive R3500
Non-topcoated Polyester with High Performance Adhesive P1400Thermal Transfer Polyester withHigh Tack Adhesive 400Non-topcoated Polyester withHigh Tack Adhesive 400
7381/78667380
FMV02
FMV01202FMV01402
7613T
7885
76991
FM1542
FP0862
OFM010N
7744FL
7730FL
Matte whiteMatte whiteMatte whiteMatte white
Matte black on whiteMatte silver on black
Gloss whiteMatte whiteBright silver
Bright silverGloss whiteMatte white
Matte white
Tracking
Securing
Protecting
7811-DMI 7812-TTL80013921
78477848
Other Technologies
Product Information:
53
Product Information:
Product Number
TemperaturePerformance2
Wt. in gramsTemp: °F (C°)
Product Type
Adhesive Type
CommentsEngagedThickness1
Inches (mm)
Material ClosureLife
Flam
e-re
sist
ant
Acry
lic
PSA
Plai
nbac
kSy
nthe
tic
Rubb
er
Adhe
sive
Plai
nbac
k (N
o ad
hesi
ve)
Acry
lic A
dhes
ive SJ3572
SJ3571
SJ3576SJ3577
SJ3518FRSJ3519FR
SJ3586FRSJ3587FR
SJ3526NSJ3527N
SJ3401SJ3402
SJ3418FRSJ3419FR
SJ3506SJ3507
SJ3000
HookLoop
HookLoop
HookLoop
HookLoop
HookLoop
HookLoop
HookLoop
HookLoop
Back to Back
Hook andLoop
Nylon
Polyester
Flame resistant nylon
Flame resistant Polyester
Nylon
Nylon
Flame resistant nylon
Polypropylene Polyester
Polypropylene Polyester
5,000+
1,000+
5,000+
1,000+
5,000+
5,000+
5,000+
<25
<25
High temperature
High temperature
Syntheticrubber
Syntheticrubber
Syntheticrubber
None
None
Acrylic
None
0.15 (3.8)
0.15 (3.8)
0.15 (3.8)
0.17 (4.3)
0.15 (3.8)
0.13 (3.3)
0.13 (3.3)
0.04 (1.0)
0.06 (1.5)
1,000g200°F (93°C)
1,000g200°F (93°C)
500g100°F (38°C)
500g100°F (38°C)
500g100°F (38°C)
1,000g220°F (104°C)
1,000g220°F (104°C)
500g120°F (49°C)
500g120°F (49°C)
Certified to GM3618M and GM2743M Type II. Loop available with strong splice providing continuous product and liner when removed from roll. Order special splice as SJ3571FS or SJ3571FSR for splice marked with blue tape. Paper liner product ordered as SJ3571P or SJ3572P.
Excellent for outdoor or humid conditions. Certified to GM 3618M.
Flame resistant (meets FAR 25.853). Meets Boeing BMS 8-285G, Type III, Class 1.
Good for outdoor or high humidity conditions. Flame resistant (meets FAR 25.853). Meets Boeing BMS 8-285G, Type IV, Class 1.
One roll (1” x 4.9 yd.) each of SJ3526N and SJ3527N, order MP3526N/27N. Paper liner product ordered as SJ3526NP or SJ3527NP.
Certified to GM2743M Type II. One roll (1” x 4.9 yd.) each of SJ3401 and SJ3402. Order MP3401/02. Sew-on.
Flame resistant (meets FAR 25.853). Certified to Boeing BMS 8-285G, Type II, Class 2, Sew-on.
Available in white. Thin profile with high shear strength.
Available in red and black. Good for bundling and cable ties.
3M™ Scotchmate™ Thin Reclosable Fasteners
Standardcolors:Nylon-black,whiteandbeige;Polyester-blackandolive.Maximumwidthsare4”,exceptfor3M™Scotchmate™ReclosableFastenersSJ3506andSJ3507whichareavailablein 6” widths. All products come in 50 yard rolls.
Footnotes: 1) Engaged thickness is for hook and loop with the same backcoating engaged to each other. Any of these 3M™ Scotchmate™ Reclosable Fasteners also be engaged with 3M™ Dual Lock™ Reclosable Fasteners providing a quick grab closure with high strength and limited cycle life. 2) Able to support indicated weight in a one square inch system static overlap shear to aluminum for 10,000 minutes (approximately 1 week), at indicated temperature.
Suitable for indoor and outdoor use
•Attachmentofpanelsordisplays,adhesive bonds to a wide variety of surfaces•Enablethousandsofeasyopeningsand closings with your attachment•Easyinstallationinjust3steps...clean,Peel and stick
Ideal for display and signage, transportation and automotive.
Solution for temporary and permanent attachment
Light to medium weight
Medium to heavy weight
3M™ Scotchmate™ and Dual-Lock™ Reclosable Fasteners
Other Technologies
54
Product Number
TemperaturePerformance4
Wt. in gramsTemp: °F (C°)
Product Type
Engaged Thickness3
Inches (mm)
CommentsColor Backcoating2
Adhesive
Lead
Acr
ylic
PSA
No a
dhes
ive
coat
ing
3M™
Acr
ylic
PSA
3M™
Acr
ylic
Pre
ssur
e Se
nsiti
ve A
dhes
ive
(PSA
)Le
adSy
nthe
tic R
ubbe
r PSA
SJ3552
SJ3550
SJ3551
SJ3562
SJ3560SJ3561
SJ3752
SJ3781
SJ3751
SJ3542
SJ3540
SJ3541
SJ3462
SJ3460
SJ3461
SJ4570
SJ4575
SJ4580
170
250
400
170
250400
170
250
400
170
250
400
170
250
400
705
705
705
Black
Clear
Black
Black
Clear
Clear
Black
Clear
White Acrylic
Clear Acrylic
White Acrylic
Synthetic Rubber
None
Clear Acrylic
Clear Acrylic
Clear Acrylic
0.23 (5.7)
0.23 (5.7)
0.23 (5.7)
0.23 (5.7)
0.15 (3.9)
0.10 (2.5)
0.10 (2.5)
0.12 (3.0)
1,000g200°F (93°C)
1,000g200°F (93°C)
1,000g200°F (93°C)
500g120°F (49°C)
1,000g200°F (93°C)
500g158°F (70°C)
500g158°F (70°C)
1,000g200°F (93°C)
Conformable, tacky adhesive adheres better to slightly textured or irregular surfaces. SJ3552V is packaged for clean room use.One roll (1” x 4.9 yd.) each of SJ3551 and SJ3552 can be ordered as MP3551/3552.
Product with high strength Scotchmate splice is SJ3550SM.SJ3550V is packaged for clean room use.
One roll (1” x 4.9 yd.) each of SJ3551 and SJ3552 can be orderedas MP3551/3552.
Translucent fastener with aggressive, tacky adhesive for general bonding to most medium and high energy surfaces.
Two rolls (1” x 4.9 yd.) of SJ3560 can be ordered as MP3560.Product with continuous liner and product splice is SJ3560FS.
Conformable, tacky adhesive for general bonding. Adheres better to slightly textured or irregular surfaces. Certified to GM3618M, Daimler Chrysler PF-8858, Ford WSB M15P35 Type III.
Certified to GM3618M, Daimler Chrysler PF-8543, PF-8858, Ford WSB M15P35 Type III.
Product with continuous liner and product splice is SJ3781FS. Certified to GM3618M, Daimler Chrysler PF-8543, PF-8858, Ford WSB M15P35 Type III.
For indoor use or attachment to low surface energy substrates. One roll (1” x 4.9 yd.) each of SJ3541 and SJ3542 can be ordered as MP3541/3542. SJ3542V is packaged for clean room use. SJ3540V is packaged for clean room use.One roll (1” x 4.9 yd.) each of SJ3541 and SJ3542 can be ordered as MP3541/3542. SJ3541V is packaged for clean room use.
For attachment to fabrics via sewing, or to wood and similar substrates using staples. Excellent UV resistance in a translucent product, allowing substrate color to be easily seen through the fastener.
Thin adhesive bonds well to low surface energy substrates.One roll (5/8” x 10’) of SJ4570 can be ordered as MP4570.
Black, bonds well to LSE substrates.
Aggressive, tacky adhesive for general bonding to most medium and high energy surfaces. Excellent for outdoor and high humidity conditions. Certified to Ford WSB M15P35 Type III.
3M™ Dual Lock™ Low Profile Reclosable Fasteners
Product Information:
Footnotes:1) Type 400 is not recommended to be engaged to other type 400 fasteners. As well, type 170 should not be engaged with type 170.2) Acrylic PSAs are best suited for outdoor or high humidity applications for medium to high energy surfaces.3) Engaged thickness is for products with the same backcoating. You can mix products with different backcoatings to obtain an even greater variety of engaged thicknesses. Any of these 3M™ Dual Lock™ Reclosable Fasteners can be engaged with 3M™ Scotchmate™ Reclosable Fasteners providing a quick grab closure with high strength and limited cycle life.4) Able to support indicated weight in a one square inch system static overlap shear for 10,000 minutes, at indicated temperature.
Notes:Suggest 4 square inches of fastener per pound of load as a starting point for evaluation of long term performance. Suggest type 250 engaged to type 250 as a starting point for evaluations. Tensile strength increases in the following order: 170/250 < 250/250 < 170/400 < 250/400. Maximum widths are 6”. All products available on 50 yard rolls except 3M™ Dual Lock™ Reclosable Fasteners SJ3756, SJ3789 and SJ3757 which are 45 yards and SJ3481 which comes in four foot strips.
This information should be considered representative only, for help in narrowing the list of possible fasteners for further and more detailed evaluation, and should not be used for specification purposes. User is responsible for determining whether the 3M product is fit for the desired end use. Refer to specific product technical data sheets for more detailed product performance information.
Other Technologies
55
3M™ Flexographic Mounting Systems
E-Series Tapes with Easy Mount Adhesive
EH-Series Adhesive to hold the edge on small diameter cylinders
Forhalftoneworkwheredotgainisaconcern,asoftertapeoptimizesreproduction. When solids and dots share the plate, a combination tape can properly balance the result. When your customer wants solid ink and crisp lines, you’ll want firm, high density mounting tape.
From the wide 3M selection, you can find the adhesives, foams, and thicknesses for the print quality that customers demand and expect. You’ll also find choices to meet your handling requirements for:
•Mountingeaseandpositioningaccuracy•Easy,cleanremovalfromplateandcylinder
On easy with reduced air entrapmentUnlikeflatorpebbledliners,E-Serieslinersarecrosshatchedonbothsideswithuniquemicrochannelsthatallowairtoflowthroughouttheadhesive.Improvedairflowvirtuallyeliminatesairbubbleproblemsforeasier
3M EH-Series Tapes combine the air-release of 3M E-Series Tapes with higher plate side adhesion to resist edge lifting on cylinder diameters as small as 2”.
application. Air releases from between the tape and plate, and between the tape and cylinder or sleeve for virtually bubble-free mounting. Setup is faster with smoother surfaces for cleaner print quality and higher productivity.
Microscopic view of adhesive surface measured with interferometer
Easy Mount Adhesive Pebbled Liner Flat Liner
Stays on with reduced edge-liftingExclusive 3M plate-side adhesive maintains tight contact between tape and plate to dramatically reduce edge lifting. Saves the prep time, downtime, and labor of sealing plate edges.
Peels off easily to reduce plate damageE-series tapes grip tightly but peel off so easily you can virtually eliminate plate back treatment. You’re less likely to damage plates, so you can save time, labor, and money
Bubble-free print quality•Preventblemishesinscreenandprocess printing•Helpassureproperregistration
Other Technologies
56
13 Series 3M™ Cushion-Mount™ Plus Medium Soft Combination Printing Tapes
19 Series 3M™ Cushion-Mount™ Plus Soft Combination Printing Tapes
12 Series 3M™ Cushion-Mount™ Plus Light Combination Printing Tapes
11 Series 3M™ Cushion-Mount™ Plus Process Printing Tapes
17 Series 3M™ Cushion-Mount™ Plus Medium Firm Combination Printing Tapes
15 Series 3M™ Cushion-Mount™ Plus Medium Firm Combination Printing Tapes
10 Series 3M™ Cushion-Mount™ Plus Standard Combination Printing Tapes
ProductNumber
Description Plates Cylinders FeaturesColorApplicationThicknessInches mm
Manufactured TargetThicknessInches mm
3M™ Flexomount™ Solid Printing Tapes
18 Series 3M™ Cushion-Mount™ Plus Firm Combination Printing Tapes
3M™
Sol
id P
rintin
g Ta
pes
411DL412DL447DL
413DL414DL
E1815H, E1815,1815ME1820H, E1820,1820M
E1715H, E1715E1720H, E1720,1720M
E1515H, E1515E1520H, E1520
E1315H, E1315E1320H, E1320
E1215H, E1215E1220H, E1220
E1915H, E1915,E1915HS, 1915ME1915S
E1920H, E1920,1920M
E1920S, 1920SE1920HS
E1115H, E1115,1115
E1115-15H, E1115-15, 1115-15
E1120H, E1120, 1120
E1120-20, 1120-20
1120K
E1015H, E1015, 1015, 1015M
E1015-15H, E1015-15,1015-15
E1020H, E1020,1020, 1020M, 1020R
E1020-20H, E1020-20,1020-20
E1040, 1040, E1040H
E1060, 1060, E1060H
0.015 0.380.020 0.510.010 0.25
0.015 0.380.020 0.51
0.015 0.380.020 0.51
0.015 0.380.020 0.51
0.015 0.380.020 0.51
0.015 0.380.020 0.51
0.015 0.380.020 0.51
0.015 0.38
0.020 0.51
0.020 0.51
0.015 0.38
0.015 0.38
0.020 0.51
0.020 0.51
0.020 0.51
0.015 0.38
0.015 0.38
0.020 0.51
0.020 0.51
0.040 1.02
0.060 1.52
0.015 0.380.020 0.510.010 0.25
0.015 0.380.020 0.51
0.017 0.430.022 0.56
0.017 0.430.022 0.56
0.017 0.430.022 0.56
0.017 0.430.020 0.51
0.017 0.430.022 0.56
0.017 0.43
0.022 0.56
0.022 0.56
0.017 0.43
0.015 0.38
0.022 0.56
0.020 0.51
0.017 0.43
0.015 0.38
0.022 0.56
0.020 0.51
0.042 1.07
0.062 1.57
Gray double coated tape with a soft rubber adhesive on each side of a vinyl carrier. Available in single and double liner.
Black double coated tapewith a firm rubber adhesiveon each side of a vinyl carrier.Available only in double liner.
Differential acrylate adhesivesystem on each side of afoam carrier, protected by a release liner on one side.
Differential acrylate adhesivesystem on each side of a foam carrier, protected by a release liner on one side.
Differential acrylate adhesivesystem on each side of a foam carrier, protected by a release liner on one side.
Differential acrylate adhesivesystem.
Differential acrylate adhesivesystem on each side of afoam carrier, protected by arelease liner on one side.
Differential acrylate adhesivesystem on each side of a foamcarrier, protected by a releaseliner on one side.
Differential acrylate adhesivesystem on each side of a foamcarrier, protected by a releaseliner on one side.
Soft support improves tonereduction when process andhalftone images predominate.
Better tone reproduction than the standard combination printing tapes.
Clean removal from plate and print cylinder.
Differential acrylate adhesivesystem on each side of a foam carrier, protected by a release liner on one side.
P/RP/RP/R
P/RP/R
PP
P
PP
PP
PP
P
P
P
P
P
P
P
P
P
P
P
P/R
PP
SS/S/K
SS/S/K
SS/S/K
SS/S/K
SS/S/K
SS/S/K
SS/S/KSS/S/KSS/S/K
SS/S/KSS/S/K
SS/S/KSS/S/K
SS/S/K
SS/S/KSS/S/K
SS/S/KSS/S/K
SS/S/KSS/S/K
SS/S/K
SS/S/K
SS/S/K
SS/S/K
SS/S/K
SS/S/K
SS/S/K
SS/S/K
GrayGrayGray
BlackBlack
BlueBlue
Teal
PurplePurple
YellowYellow
OrangeOrange
Pink
Pink
Pink
Tan
Tan
Tan
Tan
Tan
White
White
White
White
White
White
Gray vinyl tapes with high adhesion.
Helps reduce edge lifting.
Helpsminimizepinholingonsolidwork.
Black vinyl - lower adhesion.
Higher temperature and solvent resistance.
Helpsminimizepinholingonsolids.
Better solid ink density than the standard combination printing tapes.Clean removal from plate and print cylinder.
Qualityresultswhenplatecontainsslightly more solids in a combination of solid and halftone images.
High quality, medium combination print.
High quality, medium-softcombination print.
Most versatile 3M™ Cushion-Mount™ Plus Tapes.
Effectively prints most types of flexographicprinting.
3M™
Com
bina
tion
Prin
ting
Tape
s3M
™ P
roce
ss P
rintin
g
E - Air Release Liner M - Modified Plate Side Adhesion DL - Double Liner S - Urethane Sleeve K - High sleeve side adhesion for composite sleeves.SS - Stainless Steel Cylinder R - Rubber Plates P - Photopolymeric Plates EH - High Plate Side Adhesion
NOTE: This technical information and data should be considered representative or typical only and should not be used for specification purposes.
Product Information:
Other Technologies
57
Numerical Product Index
2E93EZ 43
4F79 43
4F94 43
5-Way 16
25A10 43
30NF/30H 13
31U26C/UV 43
44S56W 43
49 13
72 15
74 15
75 15
76 15
77 15
78 15
80 15
90 15
94 15
94CA 13
100 13
120af 38
200 32
200a 38
232 32
302 34
305 34
311 34
313 34
353 34
355 34
361 45
361 46
369 34
371 34
372 34
373 34
375 34
396 48
398FR 46
398FRP 46
401M 25
401M 25
411DL 56
412DL 56
413DL 56
414DL 56
415 25
420 47
421 47
425 45
425 47
427 47
433 47
444 24
447DL 56
450EK 29
450XL 29
463 28
465 28
465XL 29
466XL 29
467MP 28
468MP 28
470 50
471 45
471 50
476XL 29
480 51
481 51
483 51
484 50
525 14
535 14
540 14
550 14
551 14
560 14
590 14
665 26
666 26
700a 38
700aks 38
740 14
760 14
764 50
766 50
767 50
800a 38
800ab 38
800af 38
800asb 38
850 45
850 48
850 48
853 48
860 36
862 36
880/880NR 36
890NR 36
893 36
897 36
898/898NR 36
920XL 29
924 31
926 31
928 31
969 31
970XL 31
976 31
987 31
1015-15 56
1015M 56
1020, 1020M, 1020R 56
1020-20 56
1115 56
1120K 56
1357 13
1357L 13
1720M 56
1815M 56
1820M 56
1910C 33
1920M 56
2000NF 13
2104 43
2126 43
2141 32
2214 32
2308 32
2404 43
2552 45
2552 51
2693 32
3112 43
3125 43
3311 47
3900 33
3903 33
3921 52
3939 33
3989 11
4000UV 14
4004 23
4008 23
4016 23
4026 23
4032 23
4052 23
4056 23
4085 23
4167 43
4224NF 13
4377-50 25
4377-85 25
4408 23
4416 23
4432 23
4451 26
4462 23
4466 23
4492 23
4496 23
4611 21
4646 21
4655 21
4658F 23
4658F 26
4712 50
4811 51
4905 21
4910 21
4914 21
4919F 21
4920 21
4926 21
4929 21
4930 21
4932 21
4936 21
4936F 21
4941 21
4941F 21
4943F 21
4945 21
4946 21
4947F 21
4949 21
4950 21
4951 21
4952 21
4955 21
4956 21
4956F 21
4957F 21
4959 21
4979F 21
4991 21
5010 14
5112 43
5151 49
5153 49
5180 49
5181 49
5200 14
5401 46
5421 49
5423 49
5425 49
5430 49
5451 49
5453 49
5480 49
5481 49
5490 45
5490 49
5491 49
5498 49
5700 50
5702 50
5915 21
5925 21
5930 21
5952 21
5958FR* 21
5962 21
7214SA 52
7220SA 52
7380 52
7381/7866 52
7613T 52
76991 52
7730FL 52
7744FL 52
7811-DMI 52
7812-TT 52
7815 52
7816 52
7818 52
7847 52
7848 52
7868 52
7871 52
7872 52
7875 52
7885 52
7945MP 30
7951 30
7952MP 30
7953HL 30
7953MP 30
7955MP 30
7956MP 30
7956MWS 30
7956WDL 30
7957MP 30
7959MP 30
7961MP 30
7962MP 30
7965MP 30
7966MWS 30
7966WDL 30
7991MPW 30
7992MP 30
7992MPW 30
7993MP 30
7995MP 30
7997MP 30
8132LE 28
8153LE 28
8325 40
8326 40
8327 40
58
Numerical Product Index
8328 40
8401 48
8402 48
8403 48
8651 36
8896 35
8898 35
8898 36
8901 48
8902 48
8905 48
8911 48
8915 35
8916 35
8916V 35
8919 35
8919 36
8932 36
8934 36
8951 48
8952 48
8979 33
8979N 33
8992 48
9009 24
9019 24
9045MP 30
9056MP 30
9057MP 30
9059MP 30
9061MP 30
9077 24
9079 28
9080HL 25
9082 28
9085 28
9086 24
9087 24
9088 24
9088FL 24
9183 24
9324 49
9325 49
9372DKW 28
9372W 28
9375W 28
9377 25
9415PC 26
9416 26
9420 25
9425 26
9425HT 26
9442 28
9443NP 25
9445 28
9448HK 25
9449S 26
9457 28
9458 28
9459W 28
9471 28
9471LE 28
9472 28
9472LE 28
9482PC 28
9485PC 28
9490LE 24
9492MP 24
9495LE 24
9495MP 24
9500PC 24
9576 25
9599 25
9690 24
9690B 24
9731 25
9795 25
9795B 25
9816H 25
9816L 25
9816M 25
9817H 25
9817L 25
9817M 25
9824 24
9828 24
9888T 25
9925XL 29
9926XL 29
9934XL 29
9941 25
AC113 9
AC12 9
AC452 9
AC471 11
AC649 11
AC68 9
AC77 9
AC78 9
AC79 9
Adhesive Remover 16
AP 111 20
AP 115 20
C-22 37
C-23 37
C-25 37
Citrus Base Cleaner 16
CT-6348 25
DP100 7
DP100 Plus 7
DP100FR 7
DP100NS 7
DP105 7
DP110 7
DP110 7
DP125 7
DP125 7
DP190 7
DP190 7
DP270 7
DP420 7
DP420 7
DP420NS 7
DP460 7
DP460NS 7
DP8005 7
DP8010 7
DP8010NS 7
DP805 7
DP807 7
DP810 7
DP810NS 7
DP812 7
DP820* 7
DP825 7
E1015-15H, E1015-15 56
E1015H, E1015, 1015 56
E1020-20H, E1020-20 56
E1020H, E1020 56
E1040, 1040, E1040H 56
E1060, 1060, E1060H 56
E1115-15, 1115-15 56
E1115-15H 56
E1115H, E1115 56
E1120-20, 1120-20 56
E1120H, E1120, 1120 56
E1215H, E1215 56
E1220H, E1220 56
E1315H, E1315 56
E1320H, E1320 56
E1515H, E1515 56
E1520H, E1520 56
E1715H, E1715 56
E1720H, E1720 56
E1815H, E1815 56
E1820H, E1820 56
E1915H, E1915 56
E1915HS, 1915M 56
E1915S 56
E1920H, E1920 56
E1920HS 56
E1920S, 1920S 56
EC100 9
EC2216 7
F9460PC 28
F9469PC 28
F9473PC 28
FM1542 52
FMV01202 52
FMV01402 52
FMV02 52
GM15 11
H-10 37
H-12 37
H-120 37
H-122 37
H-123 37
H-128 37
H-128 37
H-129 37
H-130 37
H-131 37
H-171 37
H-1755 37
H-180 37
H-183 37
H-190 37
H-192 37
H-320 37
H-38 H-133 37
HT700 9
L8001 52
LO100 9
M-707 37
M-727 37
M-920 37
M-96 37
Multi-Surface Wipes 16
OFM010N 52
P400 37
PP0862 52
PR10 9
PR54 9
PR851 9
Primer 94 20
PS65 11
PS67 11
S-63 37
S-634 37
SB95 9
SF100 9
SI1500 9
Silicone Lubricant 16
SJ3000 53
SJ3401 53
SJ3402 53
SJ3418FR 53
SJ3419FR 53
SJ3460 54
SJ3461 54
SJ3462 54
SJ3506 53
SJ3507 53
SJ3518FR 53
SJ3519FR 53
SJ3526N 53
SJ3527N 53
SJ3540 54
SJ3541 54
SJ3542 54
SJ3550 54
SJ3551 54
SJ3552 54
SJ3560 54
SJ3561 54
SJ3562 54
SJ3571 53
SJ3572 53
SJ3576 53
SJ3577 53
SJ3586FR 53
SJ3587FR 53
SJ3751 54
SJ3752 54
SJ3781 54
SJ4570 54
SJ4575 54
SJ4580 54
SJ5003 41
SJ5007 41
SJ5008 41
SJ5009 41
SJ5012 41
SJ5017 41
SJ5018 41
SJ5023 41
SJ5027 41
SJ5076 41
SJ5306 41
SJ5312 41
SJ5514 41
SJ5532 41
SJ5816 41
SJ5832 41
SJ6208 41
SJ6216 41
SJ6232 41
Sticker and Marker Remover 16
TL22 11
TL42 11
TL43 11
TL62 11
TL71 11
TL72 11
TL77 11
TL90 11
Industrial Adhesives and Tapes Division3M Technologies (S) Pte Ltd
Product Use:Many factors beyond 3M’s control and uniquely within user’s knowledge and control can a�ect the use and performance of a 3M product in a particular application. Given the variety of factors that can a�ect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user’s method of application.
Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price.
Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.