C.3 (Rev.1 - Ed. 1 - 05) · cierre, facilita la instalación del accesorio y evita el gripaje entre...

Administrador

C.3 (Rev.1 - Ed. 1 - 05)

megalokr o mecesar

- 1 -

PRESENTACIÓN

se complace en presentar este nuevo catálogo de los accesorios MEGALOK en su afán de perfección y mejor servicio intentando dar la mayor información posible y ampliando su gama a las necesidades que creemos más frecuentes, fruto todo ello de nuestra constante línea de vanguardia en la variadísima producción de racordaje.

INTRODUCTION

is pleased to present you this new MEGALOK fittings catalogue, a result of our search for perfection and a better service, this catalogue tries to provide an information as complete as possible and to enlargen our product range covering the most essential needs. It is the result of our being in the lead in the very wide fitting production.

mecesa

mecesa

megalokr o mecesar

- 2 -

1.- MATERIALES DE CONSTRUCCIÓN

El racordaje MEGALOK de fabricación normal, se construye en tres tipos de materiales: Acero inoxidable grado 316, acero carbono y latón. En las instalaciones con tubería plástica, los anillos serán de nylón para racord de latón y de PTFE para racord de acero inoxidable. 2.- ACABADOS Los accesorios de acero inoxidable y latón se suministran decapados y pasivados y los de acero carbono fosfatados. Bajo pedido pueden suministrarse en otros tipos de acabados. 3.- SELECCIÓN DEL TUBO El tubo deberá tener un acabado superficial liso, exento de estrías con el fin de conseguir un perfecto ensamblaje de las dos anillas al mismo. Se recomienda tubo recocido ya que la menor dureza de este, respecto a los anillos, facilita así mismo un mejor cierre. 4.- DIMENSIONES

Los accesorios MEGALOK se utilizan para tubería en los dos tipos de dimensiones: Dimensiones en pulgadas (TUBE) desde 1/8”O.D. (3.17mm) a 1”O.D. (25.4mm). Dimensiones en milímetros desde 4 mm. a 25 mm. Se han previsto adaptadores mixtos para conectar tubería gas (PIPE) desde 1/8” (10.3mm) a 1/2” (21.3mm) a tubería milimétrica (TUBE) (ver Pág.19). 5.- DESIGNACIÓN PARA TES Y CRUCES Designación española D.E. (Spanish designation D.E.)

CRUZ T (CROSS) (TEE) MUY IMPORTANTE Rogamos tengan en cuenta que si no se especifica lo contrario, entenderemos sus pedidos como redactados según designación americana.

1.- MATERIALS

The usual MEGALOK fittings are made in three types of materials: 316 stainless steel, carbon steel and brass, in the plastic tubing systems, the ferrules will be in nylon for the brass fittings and in PTFE for the stainless steel fittings. 2.- FINISH The stainless steel and brass fittings are delivered pickled and pasivated and in carbon steel are delivered with a phosphate treatment. Under order we can deliver with other finish treatments. 3.- TUBE SELECTION The tube must have a smooth surface finish, without flute so as to achieve a perfect coupling of both ferrules. We recommend annealed tubing as its lower hardness in respect to the ferrules, makes easier a better sealing. 4.- DIMENSIONS

The MEGALOK fittings are used for piping in two dimensions types: Dimensions in inches from 1/8”O.D. (3.17mm) to1”O.D. (25.4mm) tube. Dimensions in millimetres from 4 mm. to 25 mm. We have prepared mixed adapters to connect gaz pipes from 1/8” (10.3mm.) to 1/2” (21.3mm.) with a milimetric tube (see page 19). 5.- DESIGNATION FOR TEES AND CROSSES Designación americana D.A. (American designation D.A.)

CRUZ TE (CROSS) (TEE) VERY IMPORTANT Please take account that if the contrary is not specified, we understand that your orders are placed following the American designation.

1 3

4

2

1 3

2

1 3

4

2

1 3

2

megalokr o mecesar

- 3 -

6.- DISEÑO

Los racores MEGALOK han sido cuidadosamente diseñados y fabricados para resistir las condiciones más exigentes.

6.- DESIGN

The MEGALOK fittings have been carefully designed and produced to resist the most demanding conditions.

Básicamente consta de un cuerpo con asiento para el tubo, dos anillos de compresión y una tuerca cierre. La unión hermética del tubo al cuerpo del racord se realiza gracias a la presión ejercida por los dos anillos sobre el tubo al ser estos presionadas por la tuerca. La función principal del anillo anterior es la de cierre, mientras que la del anillo posterior es, además, la de fijación del tubo al racord. Por su especial concepción tanto en diseño, como en la variedad de materiales en que se construye así como en sus conexiones, le permite abarcar una amplia gama de aplicaciones como puede ser:

A) Aplicaciones en vacío, bajo y media presión, siendo especialmente adecuada para trabajos de alta presión o cualquier otro en los que se exija un trabajo duro.

B) Campo de la alimentación y laboratorios. C) Resistencia a los ácidos más corrosivos. D) Empleo en instalaciones hidráulicas y gases. E) Aptos para tuberías de acero inox., acero carbono,

cobre, plástico, etc. F) Pueden emplearse para altas temperaturas y

aplicaciones criogénicas. G) Resiste las vibraciones. H) Conexiones en roscas, NPT ANSI/ASME B1.20.1,

ISO 7 R-Rp y opcional en ISO 228 y métrica DIN 3852 (ver catálogo adicional MEGALOK conexiones DIN 3852 – B y X)

I) Fácil en el montaje ya que no necesita un especial cuidado en el apriete, su particular diseño le impide realizar aprietes excesivos y perjudiciales. Un especial acabado de la rosca de las tuercas de cierre, facilita la instalación del accesorio y evita el gripaje entre ambos elementos.

Basically they are formed by a body with a seat for tubing, two compression ferrules and one lock nut. The hermetical union of the tube to the fitting body is made by means of the 2 ferrules pressure upon the tube when pressed by the nut. The main function of the front ferrules is the sealing, while the back ferrule also fixes the tubing to the fitting. Thanks to its special design, the variety of materials in which it can be produced and also its connections, it can be used in a large number of applications:

A) To work in vacuum, low and middle pressure, and it is specially appropriate to work under high pressures or when hard work is needed.

B) In the food industry and laboratories. C) Resistant to corrosive acids. D) Can be used in hydraulic and gaz systems. E) Suitable for stainless steel , carbon steel, cooper

and plastic tubes, ect. F) Can be used in high temperatures and for

criogenic uses. G) Vibration resistant. H) Screwed connections: NPT ANSI/ASME B1.20.1,

ISO 7 R-Rp and optionally in ISO 228 and metric DIN 3852 connections (see additional catalogue of DIN 3852 – B and X MEGALOK connections).

I) Very easy in its assembling as it does not need special tightness, its special design does not allow excessive tightness that could be dangerous. Special design in the nut screw, that makes easier the installation of the fittings and avoids the sticking between both elements.

TUBO (TUBE)

TUERCA CIERRE (NUT)

ANILLO POSTERIOR – PATENTADO (BACK FERRULE) - REGISTERED

ANILLO ANTERIOR (FRONT FERRULE)

CUERPO ASIENTO TUBO (BODY)

megalokr o mecesar

- 4 -

7.- SISTEMA DE IDENTIFICACIÓN La referencia completa de cada elemento según sus características, viene especificada en los siguientes apartados. A.- MATERIAL Irá en la parte anterior de la referencia seguida de esta IDENTIFICACIÓNAcero inox. grado 316........................................ 316 Acero carbono.................................................... S Latón……………………………………………….. L B.- TIPO DE ACCESORIO Cada accesorio viene designado por tres letras que los identifican de los demás en su forma IDENTIFICACIÓNTe tubo............................................................... KTU Unión hembra..................................................... KUH Codo macho...…………………………………….. KCM Ver detalle en pág. 5y 6 C.- CONEXIÓN ROSCADA Las roscas en los accesorios vienen designadas con un número o letra según el tipo de rosca. Deberá indicarse después del material y antes del tipo de accesorio.

7.- IDENTIFICATION SYSTEM The complete reference of each element is detailed in the following paragraphs. A.- MATERIAL Will be specified in the front part of the reference: IDENTIFICATION316 stainless steel………………………………….. 316 Carbon steel…………………………………………. S Brass…………………………………………………. L B.- TYPE OF FITTING Each fitting has a three letter reference that differences its shape IDENTIFICATIONUnion tee…………….………………………………. KTU Female connector..…………………………………. KUH Male elbow..…………………………………………. KCM See detail in pages 5 and 6 C.- SCREWED CONNECTION The screws of the fittings have a number or letters of reference depending on the screw type. It will be placed after the material and before the fitting type.

NPT (ANSI/ASME B1.20.1) ISO 7 R-Rp BSP (DIN 3852 B y X) METRICO (DIN 3852 B y X) CONEXIÓN IDENTIFICACIÓN CONEXIÓN IDENTIFICACIÓN CONEXIÓN IDENTIFICACIÓN CONEXIÓN IDENTIFICACIÓN

(CONNECTION) (IDENTIFICATION) (CONNECTION) (IDENTIFICATION) (CONNECTION) (IDENTIFICATION) (CONNECTION) (IDENTIFICATION)

1/8”….. 1 1/8”….. G 1 1/8”….. P 1 M 8 x 1 ….. BC 1/4”….. 2 1/4”.…. G 2 1/4”….. P 2 M10 x 1 ….. CC 3/8”….. 3 3/8”….. G 3 3/8”….. P 3 M12 x 1.5….. DE 1/2”….. 4 1/2”….. G 4 1/2”….. P 4 M14 x 1.5….. FE 3/4”….. 5 3/4”….. G 5 3/4”….. P 5 M16 x 1.5….. GE 1”….. 6 1”….. G 6 1”….. P6 M18 x 1.5….. HE M20 x 1.5….. IE M22 x 1.5….. KE M24 x 1.5….. LE M26 x 1.5….. NE M27 x 2 ….. PG M30 x 1.5….. RE M30 x 2 ….. RG M33 x 2 ….. SG D.- TUBO La identificación del tubo a conectar en el accesorio se indica después de la designación del tipo de accesorio.

D.- TUBE The reference of the tubing to be connected with the fitting is giver after the type of fitting reference.

PULGADAS (TUBE) PULGADAS (PIPE) (INCHES) (INCHES) M.M. Ø Ext. IDENT. Ø Ext. IDENT. Ø Ext. IDENT.

(OUTSIDE DIAMETER) (IDENTIFICATION) (OUTSIDE DIAMETER) (IDENTIFICATION) (OUTSIDE DIAMETER) (IDENTIFICATION)

1/8”….. 03 1/8”….. 1 4….. 04 3/16”… 05 1/4”.…. 2 6….. 06 1/4”….. 07 3/8”….. 3 8….. 08 5/16”… 08 1/2”….. 4 10….. 10 3/8”….. 09 12….. 12 1/2”….. 13 14….. 14 5/8”….. 58 16….. 16 3/4”….. 19 18….. 18 7/8”….. 23 20….. 20 1”….. 26 22….. 22 25….. 25 Ejemplo de aplicación: REF. 316-1 KUH06 Example:

316 1 KUH 06 316 1 KUH 06 Material │ │ │ │ Material │ │ │ │ Conexión 1/8”NPT │ │ │ Connection 1/8”NPT │ │ │ Unión hembra │ │ Female connector │ │ Tubo Ø ext. 6 m.m. │ Outside diameter of tube 6 m.m. │

megalokr o mecesar

- 5 -

UNIÓN TUBO A ROSCA MACHO KUM Pág. 7

MALE CONNECTOR

UNIÓN REDUCCIÓN TUBO

KUR Pág. 11

REDUCING UNION

UNIÓN TUBO A ROSCA HEMBRA

KUH Pág. 8

FEMALE CONNECTOR

ENLACE TUBO REDUCCIÓN

KRE Pág. 11

REDUCER

PASAMURO TUBO A ROSCA MACHO

KPM Pág. 9

BULKHEAD MALE CONNECTOR

UNIÓN TUBO

KUT Pág. 12

UNION

PASAMURO TUBO A ROSCA HEMBRA

KPH Pág. 9

BULKHEAD FEMALE CONNECTOR

CODO TUBO

KUC Pág. 12

UNION ELBOW

PASAMURO TUBO KPT Pág. 10

BULKHEAD UNION

TE TUBO

KTU Pág. 12

UNION TEE

TAPÓN TUBO KTT Pág. 10

CAP

CRUZ TUBO

KCU Pág. 12

UNION CROSS

TAPÓN PLUG KTP Pág. 10

PLUG

CODO TUBO A ROSCA MACHO

KCM Pág. 13

MALE ELBOW

TETILLA KTF Pág. 10

INSERT

CODO TUBO A ROSCA HEMBRA

KCH Pág. 14

FEMALE ELBOW

megalokr o mecesar

- 6 -

TE UNIÓN A ROSCA MACHO CENTRAL

KTC Pág. 15

MALE BRANCH TEE

CODO MIXTO PIPE KCS Pág. 19

MALE PIPE WELD ELBOW

TE UNIÓN A ROSCA MACHO LATERAL

KTL Pág. 15

MALE RUN TEE

ENLACE MIXTO TUBO KSW Pág. 19

TUBE SOCKET WELD UNION

TE UNIÓN A ROSCA HEMBRA CENTRAL

KCT Pág. 16

FEMALE BRANCH TEE

CODO MIXTO TUBO KSS Pág. 19

TUBE SOCKET WELD ELBOW

TE UNIÓN A ROSCA HEMBRA LATERAL

KLT Pág. 16

FEMALE RUN TEE

TUERCA EXAGONAL KET Pág. 20

NUT

ENLACE TUBO A ROSCA MACHO

KEM Pág. 17

MALE ADAPTER TUBE

TUERCA GRAFILADA KTG Pág. 20

KNURLED NUT

ENLACE TUBO A ROSCA MACHO

KEH Pág. 18

FEMALE ADAPTER TUBE

ANILLO POSTERIOR KFP Pág. 20

BACK FERRULE

ENLACE MIXTO PIPE KBE Pág. 19

MALE PIPE WELD CONNECTOR

ANILLO ANTERIOR KFA Pág. 20

FROT FERRULE

megalokr o mecesar

- 7 -

KUM UNIÓN TUBO A ROSCA MACHOMALE CONNECTOR

Conex. Dimensiones Peso (1) 100 Und. Conex. Dimensiones Peso (1) 100 Und. Ref. Conex. NPT Rosca Tubo A B Kg. Lbs.

Ref. Conex. BSPT Rosca Tubo A B Kg. Lbs.

1 KUM 03 1/8 1/8 30.3 13.3 1.53 3.37 G 1 KUM 03 1/8 1/8 30.3 13.3 1.53 3.37 2 KUM 03 1/4 1/8 35.3 13.3 2.33 5.13 G 2 KUM 03 1/4 1/8 35.3 13.3 2.33 5.13 3 KUM 03 3/8 1/8 36.3 13.3 2.93 6.45 G 3 KUM 03 3/8 1/8 36.3 13.3 2.93 6.45 1 KUM 04 1/8 4 31.3 13.9 1.65 3.63 G 1 KUM 04 1/8 4 31.3 13.9 1.65 3.63 2 KUM 04 1/4 4 36.3 13.9 2.53 5.56 G 2 KUM 04 1/4 4 36.3 13.9 2.53 5.56 3 KUM 04 3/8 4 37.3 13.9 3.23 7.1 G 3 KUM 04 3/8 4 37.3 13.9 3.23 7.1 1 KUM 05 1/8 3/16 31.3 13.9 1.76 3.87 G 1 KUM 05 1/8 3/16 31.3 13.9 1.76 3.87 2 KUM 05 1/4 3/16 36.3 13.9 2.76 6.07 G 2 KUM 05 1/4 3/16 36.3 13.9 2.76 6.07 3 KUM 05 3/8 3/16 37.3 13.9 3.52 7.74 G 3 KUM 05 3/8 3/16 37.3 13.9 3.52 7.74 2 KUM 06 1/4 6 38.1 15.5 2.9 6.38 G 2 KUM 06 1/4 6 38.1 15.5 2.9 6.38 3 KUM 06 3/8 6 39.1 15.5 3.73 8.2 G 3 KUM 06 3/8 6 39.1 15.5 3.73 8.2 4 KUM 06 1/2 6 43.6 15.5 7.13 15.68 G 4 KUM 06 1/2 6 43.6 15.5 7.13 15.68 2 KUM 07 1/4 1/4 38.1 15.5 3 6.6 G 2 KUM 07 1/4 1/4 38.1 15.5 3 6.6 3 KUM 07 3/8 1/4 39.1 15.5 4 8.8 G 3 KUM 07 3/8 1/4 39.1 15.5 4 8.8 4 KUM 07 1/2 1/4 43.6 15.5 7.3 16.06 G 4 KUM 07 1/2 1/4 43.6 15.5 7.3 16.06 2 KUM 08 1/4 8 (2) 38.8 16.5 3.44 7.56 G 2 KUM 08 1/4 8 (2) 38.8 16.5 3.44 7.56 3 KUM 08 3/8 8 (2) 39.8 16.5 4.84 10.64 G 3 KUM 08 3/8 8 (2) 39.8 16.5 4.84 10.64 1 KUM 09 1/8 3/8 35.8 17.3 3.13 6.89 G 1 KUM 09 1/8 3/8 35.8 17.3 3.13 6.89 2 KUM 09 1/4 3/8 40.3 17.3 4.33 9.53 G 2 KUM 09 1/4 3/8 40.3 17.3 4.33 9.53 3 KUM 09 3/8 3/8 40.8 17.3 5.73 12.61 G 3 KUM 09 3/8 3/8 40.8 17.3 5.73 12.61 4 KUM 09 1/2 3/8 45.3 17.3 8.33 18.33 G 4 KUM 09 1/2 3/8 45.3 17.3 8.33 18.33 1 KUM 10 1/8 10 36.3 17.3 4 8.8 G 1 KUM 10 1/8 10 36.3 17.3 4 8.8 2 KUM 10 1/4 10 40.8 17.3 4.7 10.34 G 2 KUM 10 1/4 10 40.8 17.3 4.7 10.34 3 KUM 10 3/8 10 41.9 17.3 6 13.2 G 3 KUM 10 3/8 10 41.9 17.3 6 13.2 4 KUM 10 1/2 10 45.3 17.3 8.5 18.7 G 4 KUM 10 1/2 10 45.3 17.3 8.5 18.7 2 KUM 12 1/4 12 43.3 22.5 5.54 12.18 G 2 KUM 12 1/4 12 43.3 22.5 5.54 12.18 3 KUM 12 3/8 12 43.8 22.5 6.64 14.60 G 3 KUM 12 3/8 12 43.8 22.5 6.64 14.60 4 KUM 12 1/2 12 47.3 22.5 9.34 20.54 G 4 KUM 12 1/2 12 47.3 22.5 9.34 20.54 5 KUM 12 3/4 12 50.3 22.5 13.54 29.78 G 5 KUM 12 3/4 12 50.3 22.5 13.54 29.78 2 KUM 13 1/4 1/2 43.3 22.5 5.77 12.69 G 2 KUM 13 1/4 1/2 43.3 22.5 5.77 12.69 3 KUM 13 3/8 1/2 43.8 22.5 6.87 15.11 G 3 KUM 13 3/8 1/2 43.8 22.5 6.87 15.11 4 KUM 13 1/2 1/2 47.3 22.5 9.07 19.95 G 4 KUM 13 1/2 1/2 47.3 22.5 9.07 19.95 5 KUM 13 3/4 1/2 50.3 22.5 14.87 32.71 G 5 KUM 13 3/4 1/2 50.3 22.5 14.87 32.71 3 KUM 58 3/8 5/8 44.3 24.1 7.86 17.29 G 3 KUM 58 3/8 5/8 44.3 24.1 7.86 17.29 4 KUM 58 1/2 5/8 47.8 24.1 11.06 24.33 G 4 KUM 58 1/2 5/8 47.8 24.1 11.06 24.33 3 KUM 16 3/8 16 44.3 24.1 7.86 17.29 G 3 KUM 16 3/8 16 44.3 24.1 7.86 17.29 4 KUM 16 1/2 16 47.8 24.1 11.06 24.33 G 4 KUM 16 1/2 16 47.8 24.1 11.06 24.33 3 KUM 18 3/8 18 45.8 24.1 9.13 20.08 G 3 KUM 18 3/8 18 45.8 24.1 9.13 20.08 4 KUM 18 1/2 18 49.3 24.1 12.53 27.56 G 4 KUM 18 1/2 18 49.3 24.1 12.53 27.56 5 KUM 18 3/4 18 50.3 24.1 16.93 37.24 G 5 KUM 18 3/4 18 50.3 24.1 16.93 37.24 3 KUM 19 3/8 3/4 45.8 24.1 10.12 22.26 G 3 KUM 19 3/8 3/4 45.8 24.1 10.12 22.26 4 KUM 19 1/2 3/4 49.3 24.1 13.72 30.18 G 4 KUM 19 1/2 3/4 49.3 24.1 13.72 30.18 5 KUM 19 3/4 3/4 50.3 24.1 17.92 39.42 G 5 KUM 19 3/4 3/4 50.3 24.1 17.92 39.42 6 KUM 19 1 3/4 56.3 24.1 17.82 39.20 G 6 KUM 19 1 3/4 56.3 24.1 17.82 39.20 3 KUM 20 3/8 20 47.3 25.6 10.73 23.6 G 3 KUM 20 3/8 20 47.3 25.6 10.73 23.6 4 KUM 20 1/2 20 50.8 25.6 14.43 31.74 G 4 KUM 20 1/2 20 50.8 25.6 14.43 31.74 5 KUM 20 3/4 20 51.8 25.6 18.53 40.76 G 5 KUM 20 3/4 20 51.8 25.6 18.53 40.76 6 KUM 20 1 20 56.8 25.6 21.23 46.7 G 6 KUM 20 1 20 56.8 25.6 21.23 46.7 4 KUM 22 1/2 22 50.6 25.7 15.5 34.1 G 4 KUM 22 1/2 22 50.6 25.7 15.5 34.1 5 KUM 22 3/4 22 51.6 25.7 19.7 43.34 G 5 KUM 22 3/4 22 51.6 25.7 19.7 43.34 4 KUM 23 1/2 7/8 50.8 25.7 15.77 34.69 G 4 KUM 23 1/2 7/8 50.8 25.7 15.77 34.69 5 KUM 23 3/4 7/8 51.8 25.7 19.97 43.93 G 5 KUM 23 3/4 7/8 51.8 25.7 19.97 43.93 5 KUM 25 3/4 25 57.9 31.3 20.62 45.36 G 5 KUM 25 3/4 25 57.9 31.3 20.62 45.36 6 KUM 25 1 25 61.9 31.3 23.12 50.86 G 6 KUM 25 1 25 61.9 31.3 23.12 50.86 5 KUM 26 3/4 1 57.9 31.3 21.02 46.24 G 5 KUM 26 3/4 1 57.9 31.3 21.02 46.24 6 KUM 26 1 1 61.9 31.3 23.52 51.74

G 6 KUM 26 1 1 61.9 31.3 23.52 51.74

(1) (2) PAG. 21

megalokr o mecesar

- 8 -

KUH UNIÓN TUBO A ROSCA HEMBRAFEMALE CONNECTOR


Ref. Conex. BSP Rosca Tubo A B Kg. Lbs.

1 KUH 03 1/8 1/8 28.8 13.3 1.33 2.93 G 1 KUH 03 1/8 1/8 28.8 13.3 1.33 2.93 2 KUH 03 1/4 1/8 33.8 13.3 1.83 4.03 G 2 KUH 03 1/4 1/8 33.8 13.3 1.83 4.03 3 KUH 03 3/8 1/8 35.3 13.3 3.8 8.37 G 3 KUH 03 3/8 1/8 35.3 13.3 3.8 8.37 1 KUH 04 1/8 4 29.8 13.9 1.53 3.36 G 1 KUH 04 1/8 4 29.8 13.9 1.53 3.36 2 KUH 04 1/4 4 34.3 13.9 2.23 4.90 G 2 KUH 04 1/4 4 34.3 13.9 2.23 4.90 3 KUH 04 3/8 4 35.8 13.9 3.82 8.41 G 3 KUH 04 3/8 4 35.8 13.9 3.82 8.41 1 KUH 05 1/8 3/16 29.8 13.9 1.72 3.78 G 1 KUH 05 1/8 3/16 29.8 13.9 1.72 3.78 2 KUH 05 1/4 3/16 34.3 13.9 2.41 5.3 G 2 KUH 05 1/4 3/16 34.3 13.9 2.41 5.3 3 KUH 05 3/8 3/16 35.8 13.9 3.89 8.56 G 3 KUH 05 3/8 3/16 35.8 13.9 3.89 8.56 2 KUH 06 1/4 6 36.1 15.5 2.63 5.78 G 2 KUH 06 1/4 6 36.1 15.5 2.63 5.78 3 KUH 06 3/8 6 37.6 15.5 3.93 8.64 G 3 KUH 06 3/8 6 37.6 15.5 3.93 8.64 4 KUH 06 1/2 6 42.6 15.5 5.63 12.38 G 4 KUH 06 1/2 6 42.6 15.5 5.63 12.38 2 KUH 07 1/4 1/4 36.1 15.5 2.8 6.16 G 2 KUH 07 1/4 1/4 36.1 15.5 2.8 6.16 3 KUH 07 3/8 1/4 37.6 15.5 4.1 9.2 G 3 KUH 07 3/8 1/4 37.6 15.5 4.1 9.2 4 KUH 07 1/2 1/4 42.6 15.5 5.8 12.76 G 4 KUH 07 1/2 1/4 42.6 15.5 5.8 12.76 2 KUH 08 1/4 8 (2) 36.8 16.5 3.24 7.128 G 2 KUH 08 1/4 8 (2) 36.8 16.5 3.24 7.128 3 KUH 08 3/8 8 (2) 38.3 16.5 4.54 9.98 G 3 KUH 08 3/8 8 (2) 38.3 16.5 4.54 9.98 1 KUH 09 1/8 3/8 33.3 17.3 3.5 7.71 G 1 KUH 09 1/8 3/8 33.3 17.3 3.5 7.71 2 KUH 09 1/4 3/8 37.8 17.3 4.13 9.09 G 2 KUH 09 1/4 3/8 37.8 17.3 4.13 9.09 3 KUH 09 3/8 3/8 39.3 17.3 5.43 11.95 G 3 KUH 09 3/8 3/8 39.3 17.3 5.43 11.95 4 KUH 09 1/2 3/8 44.3 17.3 6.93 15.25 G 4 KUH 09 1/2 3/8 44.3 17.3 6.93 15.25 1 KUH 10 1/8 10 33.3 17.3 3.5 7.71 G 1 KUH 10 1/8 10 33.3 17.3 3.5 7.71 2 KUH 10 1/4 10 37.8 17.3 4.4 9.68 G 2 KUH 10 1/4 10 37.8 17.3 4.4 9.68 3 KUH 10 3/8 10 39.3 17.3 5.8 12.76 G 3 KUH 10 3/8 10 39.3 17.3 5.8 12.76 4 KUH 10 1/2 10 44.3 17.3 7.3 16.06 G 4 KUH 10 1/2 10 44.3 17.3 7.3 16.06 2 KUH 12 1/4 12 40.3 22.5 5.24 11.52 G 2 KUH 12 1/4 12 40.3 22.5 5.24 11.52 3 KUH 12 3/8 12 41.3 22.5 6.74 14.82 G 3 KUH 12 3/8 12 41.3 22.5 6.74 14.82 4 KUH 12 1/2 12 46.3 22.5 8.04 17.68 G 4 KUH 12 1/2 12 46.3 22.5 8.04 17.68 5 KUH 12 3/4 12 48.3 22.5 13.04 28.68 G 5 KUH 12 3/4 12 48.3 22.5 13.04 28.68 2 KUH 13 1/4 1/2 40.3 22.5 5.67 12.47 G 2 KUH 13 1/4 1/2 40.3 22.5 5.67 12.47 3 KUH 13 3/8 1/2 41.3 22.5 7.07 15.55 G 3 KUH 13 3/8 1/2 41.3 22.5 7.07 15.55 4 KUH 13 1/2 1/2 46.3 22.5 8.47 18.63 G 4 KUH 13 1/2 1/2 46.3 22.5 8.47 18.63 5 KUH 13 3/4 1/2 48.3 22.5 13.47 29.63 G 5 KUH 13 3/4 1/2 48.3 22.5 13.47 29.63 3 KUH 58 3/8 5/8 41.8 24.1 8.96 19.71 G 3 KUH 58 3/8 5/8 41.8 24.1 8.96 19.71 4 KUH 58 1/2 5/8 46.8 24.1 10.46 23.01 G 4 KUH 58 1/2 5/8 46.8 24.1 10.46 23.01 3 KUH 16 3/8 16 41.8 24.1 8.96 19.71 G 3 KUH 16 3/8 16 41.8 24.1 8.96 19.71 4 KUH 16 1/2 16 46.8 24.1 10.46 23.01 G 4 KUH 16 1/2 16 46.8 24.1 10.46 23.01 3 KUH 18 3/8 18 41.8 24.1 10.53 23.16 G 3 KUH 18 3/8 18 41.8 24.1 10.53 23.16 4 KUH 18 1/2 18 46.8 24.1 12.53 27.56 G 4 KUH 18 1/2 18 46.8 24.1 12.53 27.56 5 KUH 18 3/4 18 48.3 24.1 18.53 40.76 G 5 KUH 18 3/4 18 48.3 24.1 18.53 40.76 3 KUH 19 3/8 3/4 41.8 24.1 12.32 27.1 G 3 KUH 19 3/8 3/4 41.8 24.1 12.32 27.1 4 KUH 19 1/2 3/4 46.8 24.1 14.02 30.84 G 4 KUH 19 1/2 3/4 46.8 24.1 14.02 30.84 5 KUH 19 3/4 3/4 48.3 24.1 20.32 44.7 G 5 KUH 19 3/4 3/4 48.3 24.1 20.32 44.7 6 KUH 19 1 3/4 57.3 24.1 25.11 55.31 G 6 KUH 19 1 3/4 57.3 24.1 25.11 55.31 3 KUH 20 3/8 20 42.8 25.6 13.23 29.1 G 3 KUH 20 3/8 20 42.8 25.6 13.23 29.1 4 KUH 20 1/2 20 47.8 25.6 15.23 33.5 G 4 KUH 20 1/2 20 47.8 25.6 15.23 33.5 5 KUH 20 3/4 20 49.3 25.6 21.73 47.8 G 5 KUH 20 3/4 20 49.3 25.6 21.73 47.8 6 KUH 20 1 20 57.3 25.6 22 48.46 G 6 KUH 20 1 20 57.3 25.6 22 48.46 4 KUH 22 1/2 22 47.6 25.7 22.5 49.56 G 4 KUH 22 1/2 22 47.6 25.7 22.5 49.56 5 KUH 22 3/4 22 49.1 25.7 23 50.6 G 5 KUH 22 3/4 22 49.1 25.7 23 50.6 4 KUH 23 1/2 7/8 47.8 25.7 22.8 50.22 G 4 KUH 23 1/2 7/8 47.8 25.7 22.8 50.22 5 KUH 23 3/4 7/8 49.3 25.7 23.1 50.82 G 5 KUH 23 3/4 7/8 49.3 25.7 23.1 50.82 5 KUH 25 3/4 25 53.4 31.3 24.02 52.84 G 5 KUH 25 3/4 25 53.4 31.3 24.02 52.84 6 KUH 25 1 25 62.4 31.3 31.32 68.9 G 6 KUH 25 1 25 62.4 31.3 31.32 68.9 5 KUH 26 3/4 1 53.4 31.3 24.52 53.94 G 5 KUH 26 3/4 1 53.4 31.3 24.52 53.94 6 KUH 26 1 1 62.4 31.3 32.52 71.74

G 6 KUH 26 1 1 62.4 31.3 32.52 71.74

(1) (2) PAG. 21

megalokr o mecesar

- 9 -

KPM PASAMURO TUBO A ROSCA MACHOBULKHEAD MALE CONNECTOR

Conex. Dimensiones Peso (1) 100 Und. Conex. Dimensiones Peso (1) 100 Und. Ref. Conex. NPT Ros. Tubo A B C øD Kg. Lbs.

Ref. Conex. BSPT Ros. Tubo A B C øD Kg. Lbs.

1 KPM 03 1/8 1/8 46.3 13.3 12 8.5 2.43 5.35 G 1 KPM 03 1/8 1/8 46.3 13.3 12 8.5 2.43 5.35 1 KPM 04 1/8 4 47.8 13.9 12 10 3.33 7.32 G 1 KPM 04 1/8 4 47.8 13.9 12 10 3.33 7.32 1 KPM 05 1/8 3/16 47.8 13.9 12 10 3.52 7.74 G 1 KPM 05 1/8 3/16 47.8 13.9 12 10 3.52 7.74 1 KPM 06 1/8 6 50.1 15.5 13 11.6 4 8.8 G 1 KPM 06 1/8 6 50.1 15.5 13 11.6 4 8.8 2 KPM 06 1/4 6 54.6 15.5 13 11.6 4.53 9.96 G 2 KPM 06 1/4 6 54.6 15.5 13 11.6 4.53 9.96 1 KPM 07 1/8 1/4 50.1 15.5 13 11.6 4.2 9.24 G 1 KPM 07 1/8 1/4 50.1 15.5 13 11.6 4.2 9.24 2 KPM 07 1/4 1/4 54.6 15.5 13 11.6 4.7 10.34 G 2 KPM 07 1/4 1/4 54.6 15.5 13 11.6 4.7 10.34 1 KPM 08 1/8 8 (2) 53.8 16.5 14 13.5 5.54 12.18 G 1 KPM 08 1/8 8 (2) 53.8 16.5 14 13.5 5.54 12.18 2 KPM 08 1/4 8 (2) 56.8 16.5 14 13.5 5.64 12.48 G 2 KPM 08 1/4 8 (2) 56.8 16.5 14 13.5 5.64 12.48 2 KPM 09 1/4 3/8 58.3 17.3 14 14.7 7.43 16.34 G 2 KPM 09 1/4 3/8 58.3 17.3 14 14.7 7.43 16.34 3 KPM 09 3/8 3/8 58.8 17.3 14 14.7 7.73 17 G 3 KPM 09 3/8 3/8 58.8 17.3 14 14.7 7.73 17 2 KPM 10 1/4 10 58.8 17.3 15 16.5 9.1 20 G 2 KPM 10 1/4 10 58.8 17.3 15 16.5 9.1 20 3 KPM 10 3/8 10 59.3 17.3 15 16.5 9.4 20.68 G 3 KPM 10 3/8 10 59.3 17.3 15 16.5 9.4 20.68 3 KPM 12 3/8 12 64.3 22.5 16 19.5 11.74 25.82 G 3 KPM 12 3/8 12 64.3 22.5 16 19.5 11.74 25.82 4 KPM 12 1/2 12 67.8 22.5 16 19.5 13 28.6 G 4 KPM 12 1/2 12 67.8 22.5 16 19.5 13 28.6 3 KPM 13 3/8 1/2 64.3 22.5 16 19.5 11.97 26.33 G 3 KPM 13 3/8 1/2 64.3 22.5 16 19.5 11.97 26.33 4 KPM 13 1/2 1/2 67.8 22.5 16 19.5 13.47 29.63 G 4 KPM 13 1/2 1/2 67.8 22.5 16 19.5 13.47 29.63 4 KPM 58 1/2 5/8 69.8 24.1 16 22.7 17.26 37.97 G 4 KPM 58 1/2 5/8 69.8 24.1 16 22.7 17.26 37.97 4 KPM 16 1/2 16 69.8 24.1 16 22.7 17.26 37.97 G 4 KPM 16 1/2 16 69.8 24.1 16 22.7 17.26 37.97 4 KPM 18 1/2 18 76.3 24.1 18 26 24.33 53.52 G 4 KPM 18 1/2 18 76.3 24.1 18 26 24.33 53.52 5 KPM 18 3/4 18 77.3 24.1 18 26 22.53 49.56 G 5 KPM 18 3/4 18 77.3 24.1 18 26 22.53 49.56 4 KPM 19 1/2 3/4 76.3 24.1 19 26 24.32 53.5 G 4 KPM 19 1/2 3/4 76.3 24.1 19 26 24.32 53.5 5 KPM 19 3/4 3/4 77.3 24.1 19 26 22.82 50.2 G 5 KPM 19 3/4 3/4 77.3 24.1 19 26 22.82 50.2

KPH PASAMURO TUBO A ROSCA HEMBRABULKHEAD FEMALE CONNECTOR

Conex. Dimensiones Peso (1) 100 Und. Conex. Dimensiones Peso (1) 100 Und. Ref. Conex. NPT Ros. Tubo A B C øD Kg. Lbs.

Ref. Conex. BSP Ros. Tubo A B C øD Kg. Lbs.

1 KPH 03 1/8 1/8 44.8 13.3 12 8.5 2.43 5.35 G 1 KPH 03 1/8 1/8 44.8 13.3 12 8.5 2.43 5.35 1 KPH 04 1/8 4 45.8 13.9 12 10 2.73 6 G 1 KPH 04 1/8 4 45.8 13.9 12 10 2.73 6 1 KPH 05 1/8 3/16 45.8 13.9 12 10 2.92 6.42 G 1 KPH 05 1/8 3/16 45.8 13.9 12 10 2.92 6.42 2 KPH 06 1/4 6 52.1 15.5 13 11.6 5.13 11.28 G 2 KPH 06 1/4 6 52.1 15.5 13 11.6 5.13 11.28 2 KPH 07 1/4 1/4 52.1 15.5 13 11.6 5.4 11.88 G 2 KPH 07 1/4 1/4 52.1 15.5 13 11.6 5.4 11.88 2 KPH 08 1/4 8 (2) 54.3 16.5 14 13.5 6.54 14.38 G 2 KPH 08 1/4 8 (2) 54.3 16.5 14 13.5 6.54 14.38 3 KPH 09 3/8 3/8 56.8 17.3 14 14.7 7.93 17.44 G 3 KPH 09 3/8 3/8 56.8 17.3 14 14.7 7.93 17.44 3 KPH 10 3/8 10 56.8 17.3 15 16.5 8.8 19.36 G 3 KPH 10 3/8 10 56.8 17.3 15 16.5 8.8 19.36 3 KPH 12 3/8 12 61.3 22.5 16 19.5 10.54 23.18 G 3 KPH 12 3/8 12 61.3 22.5 16 19.5 10.54 23.18 4 KPH 12 1/2 12 66.3 22.5 16 19.5 15.34 33.74 G 4 KPH 12 1/2 12 66.3 22.5 16 19.5 15.34 33.74 3 KPH 13 3/8 1/2 61.3 22.5 16 19.5 10.97 24.13 G 3 KPH 13 3/8 1/2 61.3 22.5 16 19.5 10.97 24.13 4 KPH 13 1/2 1/2 66.3 22.5 16 19.5 15.67 34.47 G 4 KPH 13 1/2 1/2 66.3 22.5 16 19.5 15.67 34.47 4 KPH 58 1/2 5/8 67.3 24.1 16 22.7 14.16 31.15 G 4 KPH 58 1/2 5/8 67.3 24.1 16 22.7 14.16 31.15 4 KPH 16 1/2 16 67.3 24.1 16 22.7 16.96 37.31 G 4 KPH 16 1/2 16 67.3 24.1 16 22.7 16.96 37.31 4 KPH 18 1/2 18 72.3 24.1 18 26 21.33 46.92 G 4 KPH 18 1/2 18 72.3 24.1 18 26 21.33 46.92 5 KPH 18 3/4 18 73.8 24.1 18 26 22.73 50 G 5 KPH 18 3/4 18 73.8 24.1 18 26 22.73 50 4 KPH 19 1/2 3/4 72.3 24.1 19 26 21.32 46.9 G 4 KPH 19 1/2 3/4 72.3 24.1 19 26 21.32 46.9 5 KPH 19 3/4 3/4 73.8 24.1 19 26 22.82 50.2 G 5 KPH 19 3/4 3/4 73.8 24.1 19 26 22.82 50.2

(1) (2) PAG. 21

megalokr o mecesar

- 10 -

KPT PASAMURO TUBO BULKHEAD UNION KTT

TAPÓN TUBO CAP

Conex. Dimensiones Peso (1) 100 Und. Conex. Dimensiones Peso (1) 100 Und. Ref.

Tubo Tubo A B C øD Kg. Lbs. Ref.

Tubo A B Kg. Lbs. 03 KPT 03 1/8 1/8 52.6 13.3 12 8.5 2.87 6.31 03 KTT 03 1/8 20.8 13.3 1.26 2.77 04 KPT 04 4 4 54.7 13.9 12 10 3.66 8.05 04 KTT 04 4 21.8 13.9 1.47 3.23 05 KPT 05 3/16 3/16 54.7 13.9 12 10 3.74 8.22 05 KTT 05 3/16 21.8 13.9 1.55 3.41 06 KPT 06 6 6 58.8 15.5 13 11.6 4.36 9.59 06 KTT 06 6 23.6 15.5 2.33 5.12 07 KPT 07 1/4 1/4 58.8 15.5 13 11.6 4.3 9.46 07 KTT 07 1/4 23.6 15.5 2.3 5.06 08 KPT 08 8 (2) 8 (2) 61.7 16.5 14 13.5 5.68 12.49 08 KTT 08 8 (2) 24.8 16.5 2.54 5.58 09 KPT 09 3/8 3/8 63.1 17.3 14 14.7 8.36 18.39 09 KTT 09 3/8 26.3 17.3 3.53 7.76 10 KPT 10 10 10 64.7 17.3 15 16.5 11 24.2 10 KTT 10 10 26.8 17.3 4.2 9.24 12 KPT 12 12 12 71.6 22.5 16 19.5 16 35.2 12 KTT 12 12 28.8 22.5 5.84 12.84 13 KPT 13 1/2 1/2 71.6 22.5 16 19.5 16.14 35.5 13 KTT 13 1/2 28.8 22.5 5.87 12.91 58 KPT 58 5/8 5/8 73.6 24.1 16 22.7 19.70 43.34 58 KTT 58 5/8 29.8 24.1 7 15.4 16 KPT 16 16 16 73.6 24.1 16 22.7 19.72 43.38 16 KTT 16 16 29.8 24.1 7.16 15.75 18 KPT 18 18 18 80.1 24.1 18 26 25 55 18 KTT 18 18 31.3 24.1 10.03 22.06 19 KPT 19 3/4 3/4 80.1 24.1 19 26 26.44 58.16 19 KTT 19 3/4 31.3 24.1 10.62 23.36 20 KPT 20 20 20 84.6 25.6 19 27.5 31.26 68.77 20 KTT 20 20 32.8 25.6 11.83 26.02 22 KPT 22 22 22 84.6 25.7 23 30.6 43 94.6 22 KTT 22 22 32.8 25.7 15.3 33.66 23 KPT 23 7/8 7/8 84.6 25.7 23 30.6 43.34 95.34 23 KTT 23 7/8 32.8 25.7 15.17 33.37 25 KPT 25 25 25 97.7 31.3 23 34 50.64 111.4 25 KTT 25 25 39.4 31.3 19.12 42.06 26 KPT 26 1 1 97.7 31.3 23 34 51.04 112.28 26 KTT 26 1 39.4 31.3 18.82 41.4

KTP TAPÓN PLUG PLUG KTF TETILLA

INSERT


Tubo A Kg. Lbs. Ref.

Tubo (ext.) Tubo (int.) A Kg. Lbs. 03 KTP 03 1/8 11.9 0.73 1.6 04 KTF 02.7 4 2.7 13.2 0.05 0.11 04 KTP 04 4 11.9 0.89 1.95 06 KTF 04 6 4 14.5 0.09 0.19 05 KTP 05 3/16 11.9 1.02 2.24 06 KTF 04.5 6 4.5 14.5 0.1 0.22 06 KTP 06 6 12.7 1.28 2.81 07 KTF 03 1/4 1/8 14.5 0.06 0.132 07 KTP 07 1/4 12.7 1.37 3.01 08 KTF 06 8 6 15.5 0.2 0.44 08 KTP 08 8 (2) 13.5 1.83 4.02 08 KTF 07 8 (2) 1/4 15.5 0.19 0.41 09 KTP 09 3/8 14.3 2.47 5.43 09 KTF 07 3/8 1/4 16 0.2 0.44 10 KTP 10 10 15 2.91 6.4 10 KTF 06 10 6 16.5 0.21 0.46 12 KTP 12 12 17.5 3.96 8.71 10 KTF 07P 10 7 16.5 0.26 0.57 13 KTP 13 1/2 17.5 4.26 9.37 10 KTF 08 10 8 16.5 0.3 0.66 58 KTP 58 5/8 17.5 6.26 13.77 12 KTF 10 12 10 22 0.55 1.21 16 KTP 16 16 17.5 6.2 13.64 13 KTF 09 1/2 3/8 22 0.55 1.21 18 KTP 18 18 17.5 8.1 17.82 58 KTF 13 5/8 1/2 23.5 0.7 1.54 19 KTP 19 3/4 17.5 9.2 20.24 16 KTF 14 16 14 23.5 0.9 1.98 20 KTP 20 20 17.5 10.3 22.66 19 KTF 13 3/4 1/2 23.5 0.74 1.62 22 KTP 22 22 17.5 12.3 27.06 20 KTF 12 20 12 25 0.64 1.4 23 KTP 23 7/8 17.5 12.6 27.72 23 KTF 19 7/8 3/4 25 1.7 3.74 25 KTP 25 25 20.6 15 33 25 KTF 20 25 20 30.5 2 4.4 26 KTP 26 1 20.6 15.4 33.88 26 KTF 19 1 3/4 30.5 2.1 4.62

(1) (2) PAG. 21

megalokr o mecesar

- 11 -

KUR UNIÓN REDUCCIÓN TUBO REDUCING UNION KRE

ENLACE TUBO REDUCCIÓN REDUCER


Tubo (1) Tubo (2) A B C Kg. Lbs. Ref.

Tubo (1) Tubo (2) A B C Kg. Lbs. 05 KUR 03 3/16 1/8 37.1 13.9 13.3 2.35 5.18 07 KRE 03 1/4 1/8 37.3 13.3 16.7 1.43 3.15 06 KUR 04 6 4 39.9 15.5 13.9 2.46 5.41 08 KRE 03 8 (2) 1/8 37.3 13.3 16.7 1.43 3.15 07 KUR 03 1/4 1/8 38.9 15.5 13.3 2.43 5.35 09 KRE 03 3/8 1/8 38.1 13.3 17.5 1.53 3.37 07 KUR 05 1/4 3/16 39.9 15.5 13.9 2.62 5.76 06 KRE 04 6 4 37.3 13.9 16.7 1.53 3.37 08 KUR 05 8 (2) 3/16 41.1 16.5 13.9 3.66 8.05 08 KRE 04 8 (2) 4 37.3 13.9 16.7 1.43 3.15 08 KUR 06 8 (2) 6 42.9 16.5 15.5 3.87 8.51 10 KRE 04 10 4 38.1 13.9 17.5 1.43 3.15 08 KUR 07 8 (2) 1/4 42.9 16.5 15.5 3.94 8.66 07 KRE 05 1/4 3/16 37.6 13.9 17 1.82 4 09 KUR 03 3/8 1/8 41.6 17.3 13.3 4.07 8.95 09 KRE 05 3/8 3/16 38.1 13.9 17.5 1.98 4.35 09 KUR 05 3/8 3/16 42.6 17.3 13.9 4.25 9.36 13 KRE 05 1/2 3/16 47.8 13.9 23 2.92 6.42 09 KUR 07 3/8 1/4 44.4 17.3 15.5 4.53 9.97 08 KRE 06 8 (2) 6 39.6 15.5 16.7 2.43 5.34 09 KUR 08 3/8 8 (2) 45.1 17.3 16.5 4.77 10.5 10 KRE 06 10 6 40.6 15.5 17.5 2.43 5.34 10 KUR 04 10 4 43.1 17.3 13.9 4.43 9.74 12 KRE 06 12 6 46.6 15.5 23 3.13 6.88 10 KUR 06 10 6 44.9 17.3 15.5 4.73 10.4 16 KRE 06 16 6 49.6 15.5 24.5 3.93 8.64 10 KUR 08 10 8 (2) 45.6 17.3 16.5 5.04 11.08 08 KRE 07 8 (2) 1/4 39.6 15.5 16.7 2.05 5.5 12 KUR 06 12 6 46.9 22.5 15.5 6.67 14.67 09 KRE 07 3/8 1/4 40.6 15.5 17.5 2.6 5.72 12 KUR 08 12 8 (2) 47.6 22.5 16.5 7.18 15.79 13 KRE 07 1/2 1/4 47.1 15.5 23 3.1 6.82 12 KUR 10 12 10 48.6 22.5 17.3 8.14 17.9 58 KRE 07 5/8 1/4 49.6 15.5 24.5 4 8.8 13 KUR 05 1/2 3/16 45.1 22.5 13.9 6.59 14.49 10 KRE 08 10 8 (2) 42.3 16.5 17.5 3.44 7.56 13 KUR 07 1/2 1/4 46.9 22.5 15.5 6.87 15.11 12 KRE 08 12 8 (2) 47.8 16.5 23 3.54 7.78 13 KUR 08 1/2 8 (2) 47.6 22.5 16.5 7.31 16.08 16 KRE 08 16 8 (2) 49.6 16.5 24.5 3.44 7.56 13 KUR 09 1/2 3/8 48.6 22.5 17.3 8.2 18.05 13 KRE 08 1/2 8 (2) 47.8 16.5 23 3.44 7.86 58 KUR 07 5/8 1/4 47.9 24.1 15.5 8.66 19.05 09 KRE 08 3/8 8 (2) 42.3 16.5 17.5 4.34 9.54 58 KUR 09 5/8 3/8 49.6 24.1 17.3 10.19 22.42 13 KRE 09 1/2 3/8 49.3 17.3 23 4.03 8.87 58 KUR 13 5/8 1/2 51.6 24.1 22.5 11.53 25.36 58 KRE 09 5/8 3/8 51.3 17.3 24.5 5.3 11.07 16 KUR 06 16 6 47.9 24.1 15.5 8.59 18.89 19 KRE 09 3/4 3/8 51.3 17.3 24.5 6.13 13.49 16 KUR 08 16 8 (2) 48.6 24.1 16.5 9.3 20.46 23 KRE 09 7/8 3/8 53.8 17.3 26 8.03 17.67 16 KUR 10 16 10 49.6 24.1 17.3 10.46 23.01 12 KRE 10 12 10 49.8 17.3 23 4.8 10.56 16 KUR 12 16 12 51.6 24.1 22.5 11.4 25.08 16 KRE 10 16 10 51.3 17.3 24.5 5.2 11.44 18 KUR 06 18 6 49.4 24.1 15.5 11.56 25.43 20 KRE 10 20 10 53 17.3 25.5 7.4 16.28 18 KUR 08 18 8 (2) 50.1 24.1 16.5 11.87 26.11 22 KRE 10 22 10 53.8 17.3 26 8.2 18.04 18 KUR 10 18 10 51.1 24.1 17.3 12.73 28 16 KRE 12 16 12 53.3 22.5 24.5 6.54 14.38 18 KUR 12 18 12 53.1 24.1 22.5 13.37 29.41 20 KRE 12 20 12 54.3 22.5 25.5 8.04 17.68 19 KUR 07 3/4 1/4 49.4 24.1 15.5 12.82 28.2 22 KRE 12 22 12 55.8 22.5 26 8.74 19.22 19 KUR 09 3/4 3/8 51.1 24.1 17.3 14.05 30.92 25 KRE 12 25 12 62.8 22.5 31.5 9.74 21.42 19 KUR 13 3/4 1/2 53.1 24.1 22.5 14.99 32.97 58 KRE 13 5/8 1/2 53.3 22.5 24.5 6.67 14.67 19 KUR 58 3/4 5/8 53.1 24.1 24.1 16.08 35.37 19 KRE 13 3/4 1/2 53.3 22.5 24.5 6.97 15.33 20 KUR 08 20 8 (2) 51.6 25.6 16.5 13.37 29.41 23 KRE 13 7/8 1/2 55.8 22.5 26 8.87 19.53 20 KUR 10 20 10 52.5 25.6 17.3 14.23 31.30 26 KRE 13 1 1/2 62.8 22.5 31.5 10.07 22.15 20 KUR 12 20 12 54.5 25.6 22.5 14.77 32.49 19 KRE 58 3/4 5/8 54.3 24.1 24.5 9.46 20.89 20 KUR 16 20 16 54.5 25.6 24.1 15.79 34.73 23 KRE 58 7/8 5/8 55.8 24.1 26 9.66 21.25 22 KUR 10 22 10 52.6 25.7 17.3 18.3 40.26 26 KRE 58 1 5/8 62.8 24.1 31.5 10.96 24.11 22 KUR 12 22 12 54.6 25.7 22.5 1914 42.1 18 KRE 16 18 16 54.3 24.1 24.5 9.46 20.81 22 KUR 20 22 20 51.6 25.7 25.6 22.73 50 20 KRE 16 20 16 56.8 24.1 25.5 9.56 21.03 23 KUR 09 7/8 3/8 52.6 25.7 17.3 18.3 40.27 22 KRE 16 22 16 55.8 24.1 26 9.66 21.25 23 KUR 13 7/8 1/2 54.6 25.7 22.5 19.44 42.76 25 KRE 16 25 16 62.8 24.1 31.5 10.46 23.01 23 KUR 19 7/8 3/4 54.6 25.7 24.1 22.49 49.47 20 KRE 18 20 18 56.8 24.1 25.5 11.63 25.58 25 KUR 12 25 12 60.6 31.3 22.5 23.09 50.79 22 KRE 18 22 18 57.3 24.1 26 11.83 26 25 KUR 16 25 16 60.6 31.3 24.1 23.88 52.53 25 KRE 18 25 18 62.8 24.1 31.5 12 26.46 25 KUR 20 25 20 60.6 31.3 25.6 26.55 58.41 23 KRE 19 7/8 3/4 57.3 24.1 26 12.32 27.1 25 KUR 22 25 22 60.6 31.3 25.7 27.12 59.66 26 KRE 19 1 3/4 62.8 24.1 31.5 12.92 28.42 26 KUR 13 1 1/2 60.6 31.3 22.5 21.59 47.49 22 KRE 20 22 20 57.3 25.6 26 14.33 31.54 26 KUR 58 1 5/8 60.6 31.3 24.1 22.68 49.89 25 KRE 20 25 20 64.2 25.6 31.5 14.73 32.4 26 KUR 19 1 3/4 60.6 31.3 24.1 24.84 54.64 25 KRE 22 25 22 64.3 25.7 31.5 17.3 38.06 26 KUR 23 1 7/8 60.6 31.3 25.7 26.59 58.49 26 KRE 23 1 7/8 64.3 25.7 31.5 17.47 38.43

megalokr o mecesar

- 12 -

KUT UNIÓN TUBO UNION KUC

CODO TUBO UNION ELBOW


Tubo Tubo A B Kg. Lbs. Ref.

Tubo Tubo A B Kg. Lbs. 03 KUT 03 1/8 1/8 36.1 13.3 1.23 2.71 03 KUC 03 1/8 1/8 24.5 13.3 3.87 8.51 04 KUT 04 4 4 37.6 13.9 1.63 3.58 04 KUC 04 4 4 25.3 13.9 4.06 8.93 05 KUT 05 3/16 3/16 37.6 13.9 2.02 4.44 05 KUC 05 3/16 3/16 25.3 13.9 4.14 9.1 06 KUT 06 6 6 41.2 15.5 2.53 5.56 06 KUC 06 6 6 27 15.5 4.26 9.37 07 KUT 07 1/4 1/4 41.2 15.5 2.8 6.16 07 KUC 07 1/4 1/4 27 15.5 4.4 9.68 08 KUT 08 8 (2) 8 (2) 43.6 16.5 3.44 7.56 08 KUC 08 8 (2) 8 (2) 28.8 16.5 4.88 10.73 09 KUT 09 3/8 3/8 46.1 17.3 4.73 10.41 09 KUC 09 3/8 3/8 30.7 17.3 6.37 14.01 10 KUT 10 10 10 46.6 17.3 5 11 10 KUC 10 10 10 31.2 17.3 6.6 14.52 12 KUT 12 12 12 50.6 22.5 6.14 13.5 12 KUC 12 12 12 35.7 22.5 11.28 24.81 13 KUT 13 1/2 1/2 50.6 22.5 6.47 14.23 13 KUC 13 1/2 1/2 35.7 22.5 11.74 25.72 58 KUT 58 5/8 5/8 51.6 24.1 8.98 19.75 58 KUC 58 5/8 5/8 40.2 24.1 31.32 68.9 16 KUT 16 16 16 51.6 24.1 9.06 19.93 16 KUC 16 16 16 40.2 24.1 31.92 70.22 18 KUT 18 18 18 53.1 24.1 10.93 24.04 18 KUC 18 18 18 40.2 24.1 34.36 75.59 19 KUT 19 3/4 3/4 53.1 24.1 12.32 27.1 19 KUC 19 3/4 3/4 40.2 24.1 36.34 79.94 20 KUT 20 20 20 54.4 25.6 13.23 29.1 20 KUC 20 20 20 40.2 25.6 37.46 82.41 22 KUT 22 22 22 54.6 25.7 14.9 32.78 22 KUC 22 22 22 40.2 25.7 40.2 88.44 23 KUT 23 7/8 7/8 54.6 25.7 15.47 34.03 23 KUC 23 7/8 7/8 40.2 25.7 41.04 90.28 25 KUT 25 25 25 65.1 31.3 18.12 39.86 25 KUC 25 25 25 49 31.3 44.14 97.1 26 KUT 26 1 1 65.1 31.3 18.72 41.18 26 KUC 26 1 1 49 31.3 45.54 100.1

KTU TE TUBO UNION TEE KCU CRUZ TUBO

UNION CROSS


Tubo Tubo A B C Kg. Lbs. Ref.

Tubo Tubo A B C Kg. Lbs. 03 KTU 03 1/8 1/8 49 13.3 24.5 3.9 8.59 03 KCU 03 1/8 1/8 57 13.3 28.5 4.54 9.98 04 KTU 04 4 4 50.6 13.9 25.3 3.89 8.55 04 KCU 04 4 4 58.6 13.9 29.3 5.82 12.8 05 KTU 05 3/16 3/16 50.6 13.9 25.3 4.06 8.93 05 KCU 05 3/16 3/16 58.6 13.9 29.3 6.18 13.59 06 KTU 06 6 6 54 15.5 27 4.29 9.43 06 KCU 06 6 6 62 15.5 31 7.72 16.98 07 KTU 07 1/4 1/4 54 15.5 27 4.5 9.9 07 KCU 07 1/4 1/4 62 15.5 31 8 17.6 08 KTU 08 8 8 (2) 57.6 16.5 28.8 6.52 14.34 08 KCU 08 8 (2) 8 (2) 63.6 16.5 31.8 9.76 21.4 09 KTU 09 3/8 3/8 61.4 17.3 30.7 8.8 19.37 09 KCU 09 3/8 3/8 65.4 17.3 32.7 14.44 31.76 10 KTU 10 10 10 62.4 17.3 31.2 9 19.8 10 KCU 10 10 10 65.4 17.3 32.7 17 37.4 12 KTU 12 12 12 71.4 22.5 35.7 14.72 32.38 12 KCU 12 12 12 69.4 22.5 34.7 20.76 45.67 13 KTU 13 1/2 1/2 71.4 22.5 35.7 15.01 33.02 13 KCU 13 1/2 1/2 69.4 22.5 34.7 20.48 45.05 58 KTU 58 5/8 5/8 80.4 24.1 40.2 27.1 59.62 58 KCU 58 5/8 5/8 72.4 24.1 36.2 33.1 72.82 16 KTU 16 16 16 80.4 24.1 40.2 26.98 59.35 16 KCU 16 16 16 72.4 24.1 36.2 32.21 70.92 18 KTU 18 18 18 80.4 24.1 40.2 28.09 61.79 18 KCU 18 18 18 78.4 24.1 39.2 42.12 92.66 19 KTU 19 3/4 3/4 80.4 24.1 40.2 41.96 93.31 19 KCU 19 3/4 3/4 78.4 24.1 39.2 43.28 95.21 20 KTU 20 20 20 80.4 25.6 40.2 44.19 97.21 20 KCU 20 20 20 80.4 25.6 40.2 48.92 107.62 22 KTU 22 22 22 80.4 25.7 40.2 47.8 105.16 22 KCU 22 22 22 80.4 25.7 40.2 55.4 121.88 23 KTU 23 7/8 7/8 80.4 25.7 40.2 48.81 107.38 23 KCU 23 7/8 7/8 80.4 25.7 40.2 56.58 124.47 25 KTU 25 25 25 98 31.3 49 55.96 123.11 25 KCU 25 25 25 99.4 31.3 49.7 63.28 139.21 26 KTU 26 1 1 98 31.3 49 56.56 124.43 26 KCU 26 1 1 99.4 31.3 49.7 64.58 142.07

(1) (2) PAG. 21

megalokr o mecesar

- 13 -

KCM CODO TUBO A ROSCA MACHOMALE ELBOW

Conex. Dimensiones Peso (1) 100 Und. Conex. Dimensiones Peso (1) 100 Und. Ref. Conex. NPT Rosca Tubo A B C Kg. Lbs.

Ref. Conex. BSPT Rosca Tubo A B C Kg. Lbs.

1 KCM 03 1/8 1/8 24.5 13.3 18.5 3.23 7.11 G 1 KCM 03 1/8 1/8 24.5 13.3 18.5 3.23 7.11 2 KCM 03 1/4 1/8 24.5 13.3 23 3.83 8.43 G 2 KCM 03 1/4 1/8 24.5 13.3 23 3.83 8.43 1 KCM 04 1/8 4 25.3 13.9 18.5 3.43 7.54 G 1 KCM 04 1/8 4 25.3 13.9 18.5 3.43 7.54 2 KCM 04 1/4 4 25.3 13.9 23 4.03 8.86 G 2 KCM 04 1/4 4 25.3 13.9 23 4.03 8.86 1 KCM 05 1/8 3/16 25.3 13.9 18.5 3.42 7.52 G 1 KCM 05 1/8 3/16 25.3 13.9 18.5 3.42 7.52 2 KCM 05 1/4 3/16 25.3 13.9 23 4.02 8.84 G 2 KCM 05 1/4 3/16 25.3 13.9 23 4.02 8.84 1 KCM 06 1/8 6 27 15.5 18.5 3.43 7.54 G 1 KCM 06 1/8 6 27 15.5 18.5 3.43 7.54 2 KCM 06 1/4 6 27 15.5 24 4.03 8.86 G 2 KCM 06 1/4 6 27 15.5 24 4.03 8.86 3 KCM 06 3/8 6 29.5 15.5 26.8 5.93 13.04 G 3 KCM 06 3/8 6 29.5 15.5 26.8 5.93 13.04 1 KCM 07 1/8 1/4 27 15.5 18.5 3.5 7.7 G 1 KCM 07 1/8 1/4 27 15.5 18.5 3.5 7.7 2 KCM 07 1/4 1/4 27 15.5 24 4.1 9.02 G 2 KCM 07 1/4 1/4 27 15.5 24 4.1 9.02 3 KCM 07 3/8 1/4 29.5 15.5 26.8 6 13.2 G 3 KCM 07 3/8 1/4 29.5 15.5 26.8 6 13.2 1 KCM 08 1/8 8 (2) 28.8 16.5 19.5 3.64 8 G 1 KCM 08 1/8 8 (2) 28.8 16.5 19.5 3.64 8 2 KCM 08 1/4 8 (2) 28.8 16.5 24,7 4.24 9.32 G 2 KCM 08 1/4 8 (2) 28.8 16.5 24,7 4.24 9.32 3 KCM 08 3/8 8 (2) 30.3 16.5 26.8 6.44 14.16 G 3 KCM 08 3/8 8 (2) 30.3 16.5 26.8 6.44 14.16 1 KCM 09 1/8 3/8 30.7 17.3 20.5 4.53 9.97 G 1 KCM 09 1/8 3/8 30.7 17.3 20.5 4.53 9.97 2 KCM 09 1/4 3/8 30.7 17.3 25 5.13 11.29 G 2 KCM 09 1/4 3/8 30.7 17.3 25 5.13 11.29 3 KCM 09 3/8 3/8 31.2 17.3 26.8 7.13 15.69 G 3 KCM 09 3/8 3/8 31.2 17.3 26.8 7.13 15.69 4 KCM 09 1/2 3/8 32.2 17.3 32.1 12.33 27.13 G 4 KCM 09 1/2 3/8 32.2 17.3 32.1 12.33 27.13 1 KCM 10 1/8 10 31.2 17.3 21 6.8 14.96 G 1 KCM 10 1/8 10 31.2 17.3 21 6.8 14.96 2 KCM 10 1/4 10 31.2 17.3 25.5 7 15.4 G 2 KCM 10 1/4 10 31.2 17.3 25.5 7 15.4 3 KCM 10 3/8 10 31.2 17.3 26.8 6.6 14.52 G 3 KCM 10 3/8 10 31.2 17.3 26.8 6.6 14.52 4 KCM 10 1/2 10 32.2 17.3 32.1 11.5 25.3 G 4 KCM 10 1/2 10 32.2 17.3 32.1 11.5 25.3 2 KCM 12 1/4 12 35.7 22.5 28 10.04 22.08 G 2 KCM 12 1/4 12 35.7 22.5 28 10.04 22.08 3 KCM 12 3/8 12 35.7 22.5 28.5 10.54 23.18 G 3 KCM 12 3/8 12 35.7 22.5 28.5 10.54 23.18 4 KCM 12 1/2 12 35.7 22.5 32.9 12.04 26.48 G 4 KCM 12 1/2 12 35.7 22.5 32.9 12.04 26.48 2 KCM 13 1/4 1/2 35.7 22.5 28 9.7 20.17 G 2 KCM 13 1/4 1/2 35.7 22.5 28 9.7 20.17 3 KCM 13 3/8 1/2 35.7 22.5 28.5 8.77 19.29 G 3 KCM 13 3/8 1/2 35.7 22.5 28.5 8.77 19.29 4 KCM 13 1/2 1/2 35.7 22.5 32.9 10.67 23.47 G 4 KCM 13 1/2 1/2 35.7 22.5 32.9 10.67 23.47 2 KCM 58 1/4 5/8 40.2 24.1 32.9 18.3 47.66 G 2 KCM 58 1/4 5/8 40.2 24.1 32.9 18.3 47.66 3 KCM 58 3/8 5/8 40.2 24.1 33 18.1 39.82 G 3 KCM 58 3/8 5/8 40.2 24.1 33 18.1 39.82 4 KCM 58 1/2 5/8 40.2 24.1 36.5 19.1 42.02 G 4 KCM 58 1/2 5/8 40.2 24.1 36.5 19.1 42.02 2 KCM 16 1/4 16 40.2 24.1 32.5 18.16 39.95 G 2 KCM 16 1/4 16 40.2 24.1 32.5 18.16 39.95 3 KCM 16 3/8 16 40.2 24.1 33 17.96 39.51 G 3 KCM 16 3/8 16 40.2 24.1 33 17.96 39.51 4 KCM 16 1/2 16 40.2 24.1 36.5 18.46 40.61 G 4 KCM 16 1/2 16 40.2 24.1 36.5 18.46 40.61 3 KCM 18 3/8 18 40.2 24.1 33 19.23 42.3 G 3 KCM 18 3/8 18 40.2 24.1 33 19.23 42.3 4 KCM 18 1/2 18 40.2 24.1 36.5 18.53 40.76 G 4 KCM 18 1/2 18 40.2 24.1 36.5 18.53 40.76 5 KCM 18 3/4 18 40.2 24.1 37.5 18.23 40.1 G 5 KCM 18 3/4 18 40.2 24.1 37.5 18.23 40.1 3 KCM 19 3/8 3/4 40.2 24.1 33 19.82 43.6 G 3 KCM 19 3/8 3/4 40.2 24.1 33 19.82 43.6 4 KCM 19 1/2 3/4 40.2 24.1 36.5 19.32 42.5 G 4 KCM 19 1/2 3/4 40.2 24.1 36.5 19.32 42.5 5 KCM 19 3/4 3/4 40.2 24.1 37.5 19.02 41.84 G 5 KCM 19 3/4 3/4 40.2 24.1 37.5 19.02 41.84 6 KCM 19 1 3/4 44.2 24.1 47 18.4 40.48 G 6 KCM 19 1 3/4 44.2 24.1 47 18.4 40.48 3 KCM 20 3/8 20 40.2 25.6 33 19.73 43.4 G 3 KCM 20 3/8 20 40.2 25.6 33 19.73 43.4 4 KCM 20 1/2 20 40.2 25.6 36.5 19.43 42.74 G 4 KCM 20 1/2 20 40.2 25.6 36.5 19.43 42.74 5 KCM 20 3/4 20 40.2 25.6 37.5 19.23 42.3 G 5 KCM 20 3/4 20 40.2 25.6 37.5 19.23 42.3 6 KCM 20 1 20 44.2 25.6 47 18.7 41.14 G 6 KCM 20 1 20 44.2 25.6 47 18.7 41.14 4 KCM 22 1/2 22 40.2 25.7 36.5 41.6 91.52 G 4 KCM 22 1/2 22 40.2 25.7 36.5 41.6 91.52 5 KCM 22 3/4 22 40.2 25.7 37.5 40.6 89.32 G 5 KCM 22 3/4 22 40.2 25.7 37.5 40.6 89.32 4 KCM 23 1/2 7/8 40.2 25.7 36.5 41.27 90.7 G 4 KCM 23 1/2 7/8 40.2 25.7 36.5 41.27 90.7 5 KCM 23 3/4 7/8 40.2 25.7 37.7 39.77 87.49 G 5 KCM 23 3/4 7/8 40.2 25.7 37.7 39.77 87.49 5 KCM 25 3/4 25 49 31.3 41.5 46.82 1103 G 5 KCM 25 3/4 25 49 31.3 41.5 46.82 1103 6 KCM 25 1 25 49 31.3 47 45.82 100.8 G 6 KCM 25 1 25 49 31.3 47 45.82 100.8 5 KCM 26 3/4 1 49 31.3 41.5 46.52 102.3 G 5 KCM 26 3/4 1 49 31.3 41.5 46.52 102.3 6 KCM 26 1 1 49 31.3 47 45.52 100.1

G 6 KCM 26 1 1 49 31.3 47 45.52 100.1

(1) (2) PAG. 21

megalokr o mecesar

- 14 -

KCH CODO TUBO A ROSCA HEMBRAFEMALE ELBOW


Ref. Conex. BSP Rosca Tubo A B C Kg. Lbs.

1 KCH 03 1/8 1/8 24.5 13.3 22.5 4.13 9.09 G 1 KCH 03 1/8 1/8 24.5 13.3 22.5 4.13 9.09 2 KCH 03 1/4 1/8 29.5 13.3 22.5 6.13 13.49 G 2 KCH 03 1/4 1/8 29.5 13.3 22.5 6.13 13.49 1 KCH 04 1/8 4 25.3 13.9 22.5 4.33 9.52 G 1 KCH 04 1/8 4 25.3 13.9 22.5 4.33 9.52 2 KCH 04 1/4 4 30.3 13.9 22.5 6.43 14.14 G 2 KCH 04 1/4 4 30.3 13.9 22.5 6.43 14.14 1 KCH 05 1/8 3/16 25.3 13.9 22.5 4.22 9.28 G 1 KCH 05 1/8 3/16 25.3 13.9 22.5 4.22 9.28 2 KCH 05 1/4 3/16 30.3 13.9 22.5 6.22 13.68 G 2 KCH 05 1/4 3/16 30.3 13.9 22.5 6.22 13.68 1 KCH 06 1/8 6 27 15.5 22.5 4.53 9.96 G 1 KCH 06 1/8 6 27 15.5 22.5 4.53 9.96 2 KCH 06 1/4 6 32 15.5 22.5 5.63 12.38 G 2 KCH 06 1/4 6 32 15.5 22.5 5.63 12.38 3 KCH 06 3/8 6 32 15.5 29.5 8.73 19.2 G 3 KCH 06 3/8 6 32 15.5 29.5 8.73 19.2 1 KCH 07 1/8 1/4 27 15.5 22.5 4.6 10.12 G 1 KCH 07 1/8 1/4 27 15.5 22.5 4.6 10.12 2 KCH 07 1/4 1/4 32 15.5 22.5 5.7 12.54 G 2 KCH 07 1/4 1/4 32 15.5 22.5 5.7 12.54 3 KCH 07 3/8 1/4 32 15.5 29.5 8.5 18.7 G 3 KCH 07 3/8 1/4 32 15.5 29.5 8.5 18.7 1 KCH 08 1/8 8 (2) 28.8 16.5 22.5 4.44 9.76 G 1 KCH 08 1/8 8 (2) 28.8 16.5 22.5 4.44 9.76 2 KCH 08 1/4 8 (2) 32.8 16.5 22.5 6.24 13.72 G 2 KCH 08 1/4 8 (2) 32.8 16.5 22.5 6.24 13.72 3 KCH 08 3/8 8 (2) 32.8 16.5 29.5 8.64 19 G 3 KCH 08 3/8 8 (2) 32.8 16.5 29.5 8.64 19 1 KCH 09 1/8 3/8 30.7 17.3 22.5 5.23 11.51 G 1 KCH 09 1/8 3/8 30.7 17.3 22.5 5.23 11.51 2 KCH 09 1/4 3/8 33.7 17.3 22.5 6.73 14.81 G 2 KCH 09 1/4 3/8 33.7 17.3 22.5 6.73 14.81 3 KCH 09 3/8 3/8 33.7 17.3 29.5 9.43 20.75 G 3 KCH 09 3/8 3/8 33.7 17.3 29.5 9.43 20.75 4 KCH 09 1/2 3/8 34.7 17.3 40 12.63 27.79 G 4 KCH 09 1/2 3/8 34.7 17.3 40 12.63 27.79 1 KCH 10 1/8 10 31.2 17.3 22.5 6.8 14.96 G 1 KCH 10 1/8 10 31.2 17.3 22.5 6.8 14.96 2 KCH 10 1/4 10 33.7 17.3 22.5 7.4 16.28 G 2 KCH 10 1/4 10 33.7 17.3 22.5 7.4 16.28 3 KCH 10 3/8 10 33.7 17.3 29.5 9.6 21.12 G 3 KCH 10 3/8 10 33.7 17.3 29.5 9.6 21.12 4 KCH 10 1/2 10 34.7 17.3 40 12.1 26.62 G 4 KCH 10 1/2 10 34.7 17.3 40 12.1 26.62 2 KCH 12 1/4 12 35.7 22.5 22.5 9.64 21.2 G 2 KCH 12 1/4 12 35.7 22.5 22.5 9.64 21.2 3 KCH 12 3/8 12 35.7 22.5 29.5 9.64 21.2 G 3 KCH 12 3/8 12 35.7 22.5 29.5 9.64 21.2 4 KCH 12 1/2 12 36.7 22.5 40 12.34 27.14 G 4 KCH 12 1/2 12 36.7 22.5 40 12.34 27.14 2 KCH 13 1/4 1/2 35.7 22.5 22.5 9.77 21.49 G 2 KCH 13 1/4 1/2 35.7 22.5 22.5 9.77 21.49 3 KCH 13 3/8 1/2 35.7 22.5 29.5 10.17 22.37 G 3 KCH 13 3/8 1/2 35.7 22.5 29.5 10.17 22.37 4 KCH 13 1/2 1/2 36.7 22.5 40 12.47 27.43 G 4 KCH 13 1/2 1/2 36.7 22.5 40 12.47 27.43 2 KCH 58 1/4 5/8 40.2 24.1 27.5 12.36 27.19 G 2 KCH 58 1/4 5/8 40.2 24.1 27.5 12.36 27.19 3 KCH 58 3/8 5/8 40.2 24.1 29.5 18.36 40.39 G 3 KCH 58 3/8 5/8 40.2 24.1 29.5 18.36 40.39 4 KCH 58 1/2 5/8 40.2 24.1 29.5 19.4 42.81 G 4 KCH 58 1/2 5/8 40.2 24.1 29.5 19.4 42.81 2 KCH 16 1/4 16 40.2 24.1 27.5 12.36 27.19 G 2 KCH 16 1/4 16 40.2 24.1 27.5 12.36 27.19 3 KCH 16 3/8 16 40.2 24.1 29.5 18.36 40.39 G 3 KCH 16 3/8 16 40.2 24.1 29.5 18.36 40.39 4 KCH 16 1/2 16 40.2 24.1 29.5 19.4 42.81 G 4 KCH 16 1/2 16 40.2 24.1 29.5 19.4 42.81 3 KCH 18 3/8 18 40.2 24.1 29.5 19.43 42.74 G 3 KCH 18 3/8 18 40.2 24.1 29.5 19.43 42.74 4 KCH 18 1/2 18 40.2 24.1 29.5 20.33 44.72 G 4 KCH 18 1/2 18 40.2 24.1 29.5 20.33 44.72 5 KCH 18 3/4 18 44.2 24.1 32 21.8 47.96 G 5 KCH 18 3/4 18 44.2 24.1 32 21.8 47.96 3 KCH 19 3/8 3/4 40.2 24.1 29.5 20.13 44.26 G 3 KCH 19 3/8 3/4 40.2 24.1 29.5 20.13 44.26 4 KCH 19 1/2 3/4 40.2 24.1 29.5 19.92 43.82 G 4 KCH 19 1/2 3/4 40.2 24.1 29.5 19.92 43.82 5 KCH 19 3/4 3/4 44.2 24.1 32 22.32 49.1 G 5 KCH 19 3/4 3/4 44.2 24.1 32 22.32 49.1 6 KCH 19 1 3/4 44.2 24.1 48 49.8 109.56 G 6 KCH 19 1 3/4 44.2 24.1 48 49.8 109.56 3 KCH 20 3/8 20 40.2 25.6 29.5 20.23 44.5 G 3 KCH 20 3/8 20 40.2 25.6 29.5 20.23 44.5 4 KCH 20 1/2 20 40.2 25.6 29.5 20.93 46.04 G 4 KCH 20 1/2 20 40.2 25.6 29.5 20.93 46.04 5 KCH 20 3/4 20 44.2 25.6 32 22.43 49.34 G 5 KCH 20 3/4 20 44.2 25.6 32 22.43 49.34 6 KCH 20 1 20 44.2 25.6 48 50.1 110.22 G 6 KCH 20 1 20 44.2 25.6 48 50.1 110.22 4 KCH 22 1/2 22 40.2 25.7 29.5 43.2 95.04 G 4 KCH 22 1/2 22 40.2 25.7 29.5 43.2 95.04 5 KCH 22 3/4 22 44.2 25.7 32 42.8 94.16 G 5 KCH 22 3/4 22 44.2 25.7 32 42.8 94.16 4 KCH 23 1/2 7/8 40.2 25.7 29.5 42.87 94.31 G 4 KCH 23 1/2 7/8 40.2 25.7 29.5 42.87 94.31 5 KCH 23 3/4 7/8 44.2 25.7 32 41.97 92.33 G 5 KCH 23 3/4 7/8 44.2 25.7 32 41.97 92.33 5 KCH 25 3/4 25 49 31.3 32 55.82 122.8 G 5 KCH 25 3/4 25 49 31.3 32 55.82 122.8 6 KCH 25 1 25 49 31.3 48 83.32 183.3 G 6 KCH 25 1 25 49 31.3 48 83.32 183.3 5 KCH 26 3/4 1 49 31.3 32 55.02 121 G 5 KCH 26 3/4 1 49 31.3 32 55.02 121 6 KCH 26 1 1 49 31.3 48 82.52 181.54

G 6 KCH 26 1 1 49 31.3 48 82.52 181.54

(1) (2) PAG. 21

megalokr o mecesar

- 15 -

KTC TE UNIÓN R. MACHO CENTRALMALE BRANCH TEE KTL

TE UNIÓN R. MACHO LATERALMALE RUN TEE


Ref. Conex. NPT Rosca Tubo A B C Kg. Lbs.

1 KTC 03 1/8 1/8 49 13.3 18.5 5.07 11.15 1 KTL 03 1/8 1/8 43 13.3 24.5 5.07 11.15 1 KTC 04 1/8 4 50.6 13.9 18.5 5.36 11.79 1 KTL 04 1/8 4 43.8 13.9 25.3 5.36 11.79 2 KTC 04 1/4 4 54.6 13.9 25 7.46 16.41 2 KTL 04 1/4 4 52.3 13.9 27.3 7.46 16.41 1 KTC 05 1/8 3/16 50.6 13.9 18.5 5.24 11.52 1 KTL 05 1/8 3/16 43.8 13.9 25.3 5.24 11.52 1 KTC 06 1/8 6 54 15.5 18.5 5.56 12.23 1 KTL 06 1/8 6 45.5 15.5 27 5.56 12.23 2 KTC 06 1/4 6 58 15.5 25 7.56 16.63 2 KTL 06 1/4 6 54 15.5 29 7.56 16.63 1 KTC 07 1/8 1/4 54 15.5 18.5 5.5 12.1 1 KTL 07 1/8 1/4 45.5 15.5 27 5.5 12.1 2 KTC 07 1/4 1/4 58 15.5 25 8.2 18.04 2 KTL 07 1/4 1/4 54 15.5 29 8.2 18.04 1 KTC 08 1/8 8 (2) 57.6 16.5 19.5 5.88 12.93 1 KTL 08 1/8 8 (2) 48.3 16.5 28.8 5.88 12.93 2 KTC 09 1/4 3/8 61.4 17.3 25 10.17 22.37 2 KTL 09 1/4 3/8 55.7 17.3 30.7 10.17 22.37 3 KTC 09 3/8 3/8 67.4 17.3 28 14.57 32.05 3 KTL 09 3/8 3/8 61.7 17.3 33.7 11.07 24.35 2 KTC 10 1/4 10 62.4 17.3 25.5 10.4 22.88 2 KTL 10 1/4 10 56.7 17.3 31.2 10.4 22.88 3 KTC 10 3/8 10 67.4 17.3 28 15.2 33.44 3 KTL 10 3/8 10 61.7 17.3 33.7 12.2 26.84 3 KTC 12 3/8 12 71.4 22.5 28 16.28 35.81 3 KTL 12 3/8 12 63.7 22.5 35.7 13.08 28.77 3 KTC 13 3/8 1/2 71.4 22.5 28 16.34 35.94 3 KTL 13 3/8 1/2 63.7 22.5 35.7 13.34 29.34 4 KTC 13 1/2 1/2 73.4 22.5 31.5 17.34 38.14 4 KTL 13 1/2 1/2 69.7 22.5 36.7 16.34 35.94 4 KTC 58 1/2 5/8 76.4 24.1 35 29.1 64.02 4 KTL 58 1/2 5/8 70.1 24.1 35.6 24.8 54.56 4 KTC 16 1/2 16 76.4 24.1 35 28.92 63.62 4 KTL 16 1/2 16 70.1 24.1 35.6 24.22 53.25 4 KTC 18 1/2 18 76.4 24.1 35 31.26 68.77 4 KTL 18 1/2 18 73.7 24.1 37.6 26.56 58.43 4 KTC 19 1/2 3/4 76.4 24.1 35 33.04 72.68 4 KTL 19 1/2 3/4 73.7 24.1 37.6 28.64 63 4 KTC 20 1/2 20 76.4 25.6 35 34.26 75.37 4 KTL 20 1/2 20 75.8 25.6 38.9 29.96 65.91 5 KTC 22 3/4 22 76.4 25.7 36 45.2 99.44 5 KTL 22 3/4 22 83.6 25.7 45 45.2 99.44 5 KTC 23 3/4 7/8 76.4 25.7 36 45.04 99.08 5 KTL 23 3/4 7/8 83.6 25.7 45 45.04 99.04 5 KTC 25 3/4 25 95.6 31.3 40.4 46.65 100.4 5 KTL 25 3/4 25 93 31.3 47.8 45.64 100.4 5 KTC 26 3/4 1 95.6 31.3 40.4 45.04 99.08 5 KTL 26 3/4 1 93 31.3 47.8 45.04 99.09


Conex. BSPT Rosca Tubo A B C Kg. Lbs. Ref.

Conex. BSPT Rosca Tubo A B C Kg. Lbs. G 1 KTC 03 1/8 1/8 49 13.3 18.5 5.07 11.15 G 1 KTL 03 1/8 1/8 43 13.3 24.5 5.07 11.15 G 1 KTC 04 1/8 4 50.6 13.9 18.5 5.36 11.79 G 1 KTL 04 1/8 4 43.8 13.9 25.3 5.36 11.79 G 2 KTC 04 1/4 4 54.6 13.9 25 7.46 16.41 G 2 KTL 04 1/4 4 52.3 13.9 27.3 7.46 16.41 G 1 KTC 05 1/8 3/16 50.6 13.9 18.5 5.24 11.52 G 1 KTL 05 1/8 3/16 43.8 13.9 25.3 5.24 11.52 G 1 KTC 06 1/8 6 54 15.5 18.5 5.56 12.23 G 1 KTL 06 1/8 6 45.5 15.5 27 5.56 12.23 G 2 KTC 06 1/4 6 58 15.5 25 7.56 16.63 G 2 KTL 06 1/4 6 54 15.5 29 7.56 16.63 G 1 KTC 07 1/8 1/4 54 15.5 18.5 5.5 12.1 G 1 KTL 07 1/8 1/4 45.5 15.5 27 5.5 12.1 G 2 KTC 07 1/4 1/4 58 15.5 25 8.2 18.04 G 2 KTL 07 1/4 1/4 54 15.5 29 8.2 18.04 G 1 KTC 08 1/8 8 (2) 57.6 16.5 19.5 5.88 12.93 G 1 KTL 08 1/8 8 (2) 48.3 16.5 28.8 5.88 12.93 G 2 KTC 09 1/4 3/8 61.4 17.3 25 10.17 22.37 G 2 KTL 09 1/4 3/8 55.7 17.3 30.7 10.17 22.37 G 3 KTC 09 3/8 3/8 67.4 17.3 28 14.57 32.05 G 3 KTL 09 3/8 3/8 61.7 17.3 33.7 11.07 24.35 G 2 KTC 10 1/4 10 62.4 17.3 25.5 10.4 22.88 G 2 KTL 10 1/4 10 56.7 17.3 31.2 10.4 22.88 G 3 KTC 10 3/8 10 67.4 17.3 28 15.2 33.44 G 3 KTL 10 3/8 10 61.7 17.3 33.7 12.2 26.84 G 3 KTC 12 3/8 12 71.4 22.5 28 16.28 35.81 G 3 KTL 12 3/8 12 63.7 22.5 35.7 13.08 28.77 G 3 KTC 13 3/8 1/2 71.4 22.5 28 16.34 35.94 G 3 KTL 13 3/8 1/2 63.7 22.5 35.7 13.34 29.34 G 4 KTC 13 1/2 1/2 73.4 22.5 31.5 17.34 38.14 G 4 KTL 13 1/2 1/2 69.7 22.5 36.7 16.34 35.94 G 4 KTC 58 1/2 5/8 76.4 24.1 35 29.1 64.02 G 4 KTL 58 1/2 5/8 70.1 24.1 35.6 24.8 54.56 G 4 KTC 16 1/2 16 76.4 24.1 35 28.92 63.62 G 4 KTL 16 1/2 16 70.1 24.1 35.6 24.22 53.25 G 4 KTC 18 1/2 18 76.4 24.1 35 31.26 68.77 G 4 KTL 18 1/2 18 73.7 24.1 37.6 26.56 58.43 G 4 KTC 19 1/2 3/4 76.4 24.1 35 33.04 72.68 G 4 KTL 19 1/2 3/4 73.7 24.1 37.6 28.64 63 G 4 KTC 20 1/2 20 76.4 25.6 35 34.26 75.37 G 4 KTL 20 1/2 20 75.8 25.6 38.9 29.96 65.91 G 5 KTC 22 3/4 22 76.4 25.7 36 45.2 99.44 G 5 KTL 22 3/4 22 83.6 25.7 45 45.2 99.44 G 5 KTC 23 3/4 7/8 76.4 25.7 36 45.04 99.08 G 5 KTL 23 3/4 7/8 83.6 25.7 45 45.04 99.04 G 5 KTC 25 3/4 25 95.6 31.3 40.4 46.65 100.4 G 5 KTL 25 3/4 25 93 31.3 47.8 45.64 100.4 G 5 KTC 26 3/4 1 95.6 31.3 40.4 45.04 99.08

G 5 KTL 26 3/4 1 93 31.3 47.8 45.04 99.09

(1) (2) PAG. 21

megalokr o mecesar

- 16 -

KCT TE UNIÓN R. HEMBRA CENTRALFEMALE BRANCH TEE KLT

TE UNIÓN R. HEMBRA LATERALFEMALE RUN TEE


Ref. Conex. NPT Rosca Tubo A B C Kg. Lbs.

1 KCT 03 1/8 1/8 51 13.3 19 7.67 16.87 1 KLT 03 1/8 1/8 44.5 13.3 25.5 7.67 16.87 1 KCT 04 1/8 4 52.6 13.9 19 7.86 17.29 1 KLT 04 1/8 4 45.3 13.9 26.3 7.86 17.29 2 KCT 04 1/4 4 60.6 13.9 22.5 12.86 28.29 2 KLT 04 1/4 4 52.8 13.9 30.3 11.96 26.31 1 KCT 05 1/8 3/16 52.6 13.9 19 8.04 17.68 1 KLT 05 1/8 3/16 45.3 13.9 26.3 8.04 17.68 1 KCT 06 1/8 6 56 15.5 19 8.26 18.17 1 KLT 06 1/8 6 47 15.5 28 8.26 18.17 2 KCT 06 1/4 6 64 15.5 22.5 13.46 29.61 2 KLT 06 1/4 6 54.5 15.5 32 12.16 26.75 1 KCT 07 1/8 1/4 56 15.5 19 8.45 18.59 1 KLT 07 1/8 1/4 47 15.5 28 8.45 18.59 2 KCT 07 1/4 1/4 64 15.5 22.5 13.6 29.92 2 KLT 07 1/4 1/4 54.5 15.5 32 12.2 26.84 1 KCT 08 1/8 8 (2) 57.6 16.5 19 8.93 19.64 1 KLT 08 1/8 8 (2) 47.8 16.5 28.8 8.93 19.64 2 KCT 09 1/4 3/8 67.4 17.3 22.5 15.27 33.59 2 KLT 09 1/4 3/8 56.2 17.3 33.7 13.87 30.51 3 KCT 09 3/8 3/8 67.4 17.3 22.5 15.07 33.15 3 KLT 09 3/8 3/8 56.2 17.3 33.7 14.07 30.95 2 KCT 10 1/4 10 67.4 17.3 22.5 15.2 33.44 2 KLT 10 1/4 10 56.2 17.3 33.7 13.8 30.36 3 KCT 10 3/8 10 67.4 17.3 22.5 15 33 3 KLT 10 3/8 10 56.2 17.3 33.7 14 30.8 3 KCT 12 3/8 12 71.4 22.5 22.5 16.08 35.37 3 KLT 12 3/8 12 58.2 22.5 35.7 14.68 32.29 3 KCT 13 3/8 1/2 71.4 22.5 22.5 16.14 35.5 3 KLT 13 3/8 1/2 58.2 22.5 35.7 14.74 32.42 4 KCT 13 1/2 1/2 73.4 22.5 40 27.54 60.58 4 KLT 13 1/2 1/2 68.7 22.5 40.2 32.34 71.14 4 KCT 58 1/2 5/8 80.4 24.1 28.5 28.1 61.82 4 KLT 58 1/2 5/8 68.7 24.1 40.2 35.1 77.22 4 KCT 16 1/2 16 80.4 24.1 28.5 27.92 61.42 4 KLT 16 1/2 16 68.7 24.1 40.2 34.92 76.82 4 KCT 18 1/2 18 80.4 24.1 28.5 29.06 63.93 4 KLT 18 1/2 18 68.7 24.1 40.2 37.56 82.63 4 KCT 19 1/2 3/4 80.4 24.1 28.5 29.64 65.2 4 KLT 19 1/2 3/4 68.7 24.1 40.2 39.64 87.2 4 KCT 20 1/2 20 80.4 25.6 28.5 29.396 65.91 4 KLT 20 1/2 20 68.7 25.6 40.2 41.46 91.21 5 KCT 22 3/4 22 88.4 25.7 32 57.2 125.84 5 KLT 22 3/4 22 76.2 25.7 44.2 57.2 125.84 5 KCT 23 3/4 7/8 88.4 25.7 32 56.54 124.38 5 KLT 23 3/4 7/8 76.2 25.7 44.2 56.54 124.38 5 KCT 25 3/4 25 98.4 31.3 32 55.34 121.74 5 KLT 25 3/4 25 81.2 31.3 49.2 55.34 121.74 5 KCT 26 3/4 1 98.4 31.3 32 55.04 121.08 5 KLT 26 3/4 1 81.2 31.3 49.2 55.04 121.08


Conex. BSP Rosca Tubo A B C Kg. Lbs. Ref.

Conex. BSP Rosca Tubo A B C Kg. Lbs. G 1 KCT 03 1/8 1/8 51 13.3 19 7.67 16.87 G 1 KLT 03 1/8 1/8 44.5 13.3 25.5 7.67 16.87 G 1 KCT 04 1/8 4 52.6 13.9 19 7.86 17.29 G 1 KLT 04 1/8 4 45.3 13.9 26.3 7.86 17.29 G 2 KCT 04 1/4 4 60.6 13.9 22.5 12.86 28.29 G 2 KLT 04 1/4 4 52.8 13.9 30.3 11.96 26.31 G 1 KCT 05 1/8 3/16 52.6 13.9 19 8.04 17.68 G 1 KLT 05 1/8 3/16 45.3 13.9 26.3 8.04 17.68 G 1 KCT 06 1/8 6 56 15.5 19 8.26 18.17 G 1 KLT 06 1/8 6 47 15.5 28 8.26 18.17 G 2 KCT 06 1/4 6 64 15.5 22.5 13.46 29.61 G 2 KLT 06 1/4 6 54.5 15.5 32 12.16 26.75 G 1 KCT 07 1/8 1/4 56 15.5 19 8.45 18.59 G 1 KLT 07 1/8 1/4 47 15.5 28 8.45 18.59 G 2 KCT 07 1/4 1/4 64 15.5 22.5 13.6 29.92 G 2 KLT 07 1/4 1/4 54.5 15.5 32 12.2 26.84 G 1 KCT 08 1/8 8 (2) 57.6 16.5 19 8.93 19.64 G 1 KLT 08 1/8 8 (2) 47.8 16.5 28.8 8.93 19.64 G 2 KCT 09 1/4 3/8 67.4 17.3 22.5 15.27 33.59 G 2 KLT 09 1/4 3/8 56.2 17.3 33.7 13.87 30.51 G 3 KCT 09 3/8 3/8 67.4 17.3 22.5 15.07 33.15 G 3 KLT 09 3/8 3/8 56.2 17.3 33.7 14.07 30.95 G 2 KCT 10 1/4 10 67.4 17.3 22.5 15.2 33.44 G 2 KLT 10 1/4 10 56.2 17.3 33.7 13.8 30.36 G 3 KCT 10 3/8 10 67.4 17.3 22.5 15 33 G 3 KLT 10 3/8 10 56.2 17.3 33.7 14 30.8 G 3 KCT 12 3/8 12 71.4 22.5 22.5 16.08 35.37 G 3 KLT 12 3/8 12 58.2 22.5 35.7 14.68 32.29 G 3 KCT 13 3/8 1/2 71.4 22.5 22.5 16.14 35.5 G 3 KLT 13 3/8 1/2 58.2 22.5 35.7 14.74 32.42 G 4 KCT 13 1/2 1/2 73.4 22.5 40 27.54 60.58 G 4 KLT 13 1/2 1/2 68.7 22.5 40.2 32.34 71.14 G 4 KCT 58 1/2 5/8 80.4 24.1 28.5 28.1 61.82 G 4 KLT 58 1/2 5/8 68.7 24.1 40.2 35.1 77.22 G 4 KCT 16 1/2 16 80.4 24.1 28.5 27.92 61.42 G 4 KLT 16 1/2 16 68.7 24.1 40.2 34.92 76.82 G 4 KCT 18 1/2 18 80.4 24.1 28.5 29.06 63.93 G 4 KLT 18 1/2 18 68.7 24.1 40.2 37.56 82.63 G 4 KCT 19 1/2 3/4 80.4 24.1 28.5 29.64 65.2 G 4 KLT 19 1/2 3/4 68.7 24.1 40.2 39.64 87.2 G 4 KCT 20 1/2 20 80.4 25.6 28.5 29.396 65.91 G 4 KLT 20 1/2 20 68.7 25.6 40.2 41.46 91.21 G 5 KCT 22 3/4 22 88.4 25.7 32 57.2 125.84 G 5 KLT 22 3/4 22 76.2 25.7 44.2 57.2 125.84 G 5 KCT 23 3/4 7/8 88.4 25.7 32 56.54 124.38 G 5 KLT 23 3/4 7/8 76.2 25.7 44.2 56.54 124.38 G 5 KCT 25 3/4 25 98.4 31.3 32 55.34 121.74 G 5 KLT 25 3/4 25 81.2 31.3 49.2 55.34 121.74 G 5 KCT 26 3/4 1 98.4 31.3 32 55.04 121.08

G 5 KLT 26 3/4 1 81.2 31.3 49.2 55.04 121.08

(1) (2) PAG. 21

megalokr o mecesar

- 17 -

KEM ENLACE TUBO A ROSCA MACHOMALE ADAPTER TUBE


Ref. Conex. BSPT Rosca Tubo A B Kg. Lbs.

1 KEM 03 1/8 1/8 28.5 13.5 1 2.2 G 1 KEM 03 1/8 1/8 28.5 13.5 1 2.2 2 KEM 03 1/4 1/8 33.5 13.5 1.9 4.18 G 2 KEM 03 1/4 1/8 33.5 13.5 1.9 4.18 1 KEM 04 1/8 4 29 14.2 1 2.2 G 1 KEM 04 1/8 4 29 14.2 1 2.2 2 KEM 04 1/4 4 34 14.2 2.1 4.62 G 2 KEM 04 1/4 4 34 14.2 2.1 4.62 1 KEM 05 1/8 3/16 29 14.2 1.1 2.42 G 1 KEM 05 1/8 3/16 29 14.2 1.1 2.42 2 KEM 05 1/4 3/16 34 14.2 2.2 4.84 G 2 KEM 05 1/4 3/16 34 14.2 2.2 4.84 1 KEM 06 1/8 6 31 16 9.2 2.64 G 1 KEM 06 1/8 6 31 16 9.2 2.64 2 KEM 06 1/4 6 36 16 2.5 5.5 G 2 KEM 06 1/4 6 36 16 2.5 5.5 3 KEM 06 3/8 6 37 16 3.2 7.04 G 3 KEM 06 3/8 6 37 16 3.2 7.04 4 KEM 06 1/2 6 41.5 16 5.8 12.76 G 4 KEM 06 1/2 6 41.5 16 5.8 12.76 1 KEM 07 1/8 1/4 31 16 1.2 2.64 G 1 KEM 07 1/8 1/4 31 16 1.2 2.64 2 KEM 07 1/4 1/4 36 16 2.6 5.72 G 2 KEM 07 1/4 1/4 36 16 2.6 5.72 3 KEM 07 3/8 1/4 37 16 3.2 7.04 G 3 KEM 07 3/8 1/4 37 16 3.2 7.04 4 KEM 07 1/2 1/4 41.5 16 5.8 12.76 G 4 KEM 07 1/2 1/4 41.5 16 5.8 12.76 1 KEM 08 1/8 8 (2) 31.5 16.7 1.2 2.64 G 1 KEM 08 1/8 8 (2) 31.5 16.7 1.2 2.64 2 KEM 08 1/4 8 (2) 36.5 16.7 2.8 6.16 G 2 KEM 08 1/4 8 (2) 36.5 16.7 2.8 6.16 3 KEM 08 3/8 8 (2) 38 16.7 3.3 7.26 G 3 KEM 08 3/8 8 (2) 38 16.7 3.3 7.26 4 KEM 08 1/2 8 (2) 42 16.7 6 13.2 G 4 KEM 08 1/2 8 (2) 42 16.7 6 13.2 1 KEM 09 1/8 3/8 32.5 17.5 1.3 2.86 G 1 KEM 09 1/8 3/8 32.5 17.5 1.3 2.86 2 KEM 09 1/4 3/8 37.5 17.5 3 6.6 G 2 KEM 09 1/4 3/8 37.5 17.5 3 6.6 3 KEM 09 3/8 3/8 38.5 17.5 3.4 7.48 G 3 KEM 09 3/8 3/8 38.5 17.5 3.4 7.48 4 KEM 09 1/2 3/8 43 17.5 6.2 13.64 G 4 KEM 09 1/2 3/8 43 17.5 6.2 13.64 1 KEM 10 1/8 10 32.5 17.5 1.3 2.86 G 1 KEM 10 1/8 10 32.5 17.5 1.3 2.86 2 KEM 10 1/4 10 37.5 17.5 3.2 7.04 G 2 KEM 10 1/4 10 37.5 17.5 3.2 7.04 3 KEM 10 3/8 10 39 17.5 3.5 7.7 G 3 KEM 10 3/8 10 39 17.5 3.5 7.7 4 KEM 10 1/2 10 43 17.5 6.3 13.86 G 4 KEM 10 1/2 10 43 17.5 6.3 13.86 2 KEM 12 1/4 12 43 23 3.7 8.14 G 2 KEM 12 1/4 12 43 23 3.7 8.14 3 KEM 12 3/8 12 44.5 23 3.6 7.92 G 3 KEM 12 3/8 12 44.5 23 3.6 7.92 4 KEM 12 1/2 12 48.5 23 6.5 14.3 G 4 KEM 12 1/2 12 48.5 23 6.5 14.3 2 KEM 13 1/4 1/2 43 23 2.4 5.28 G 2 KEM 13 1/4 1/2 43 23 2.4 5.28 3 KEM 13 3/8 1/2 44.5 23 3.7 8.14 G 3 KEM 13 3/8 1/2 44.5 23 3.7 8.14 4 KEM 13 1/2 1/2 48.5 23 6.6 14.52 G 4 KEM 13 1/2 1/2 48.5 23 6.6 14.52 3 KEM 58 3/8 5/8 46 24.5 3.8 8.36 G 3 KEM 58 3/8 5/8 46 24.5 3.8 8.36 4 KEM 58 1/2 5/8 50 24.5 6.9 15.18 G 4 KEM 58 1/2 5/8 50 24.5 6.9 15.18 5 KEM 58 3/4 5/8 53 24.5 10.5 23.1 G 5 KEM 58 3/4 5/8 53 24.5 10.5 23.1 3 KEM 16 3/8 16 46 24.5 3.8 8.36 G 3 KEM 16 3/8 16 46 24.5 3.8 8.36 4 KEM 16 1/2 16 50 24.5 6.9 15.18 G 4 KEM 16 1/2 16 50 24.5 6.9 15.18 5 KEM 16 3/4 16 53 24.5 10.5 23.1 G 5 KEM 16 3/4 16 53 24.5 10.5 23.1 3 KEM 18 3/8 18 46 24.5 4.3 9.46 G 3 KEM 18 3/8 18 46 24.5 4.3 9.46 4 KEM 18 1/2 18 50 24.5 7.3 16.06 G 4 KEM 18 1/2 18 50 24.5 7.3 16.06 5 KEM 18 3/4 18 53 24.5 11.5 25.3 G 5 KEM 18 3/4 18 53 24.5 11.5 25.3 4 KEM 19 1/2 3/4 50 24.5 7.5 16.5 G 4 KEM 19 1/2 3/4 50 24.5 7.5 16.5 5 KEM 19 3/4 3/4 53 24.5 12.5 27.5 G 5 KEM 19 3/4 3/4 53 24.5 12.5 27.5 6 KEM 19 1 3/4 59 24.5 18 39.6 G 6 KEM 19 1 3/4 59 24.5 18 39.6 4 KEM 20 1/2 20 51 25.5 8 17.6 G 4 KEM 20 1/2 20 51 25.5 8 17.6 5 KEM 20 3/4 20 54 25.5 13 28.6 G 5 KEM 20 3/4 20 54 25.5 13 28.6 6 KEM 20 1 20 60.5 25.5 19 41.8 G 6 KEM 20 1 20 60.5 25.5 19 41.8 5 KEM 22 3/4 22 54.5 26 14 30.8 G 5 KEM 22 3/4 22 54.5 26 14 30.8 5 KEM 23 3/4 7/8 54.5 26 14 30.8 G 5 KEM 23 3/4 7/8 54.5 26 14 30.8 5 KEM 25 3/4 25 60 31.5 14.5 31.9 G 5 KEM 25 3/4 25 60 31.5 14.5 31.9 5 KEM 26 3/4 1 60 31.5 14.7 32.34

G 5 KEM 26 3/4 1 60 31.5 14.7 32.34

(1) (2) PAG. 21

megalokr o mecesar

- 18 -

KEH ENLACE TUBO A ROSCA HEMBRAFEMALE ADAPTER TUBE


Ref. Conex. BSP Rosca Tubo A B Kg. Lbs.

1 KEH 03 1/8 1/8 27 13.5 1.3 2.86 G 1 KEH 03 1/8 1/8 27 13.5 1.3 2.86 2 KEH 03 1/4 1/8 32.5 13.5 3.1 6.82 G 2 KEH 03 1/4 1/8 32.5 13.5 3.1 6.82 1 KEH 04 1/8 4 28 14.2 1.3 2.86 G 1 KEH 04 1/8 4 28 14.2 1.3 2.86 2 KEH 04 1/4 4 33 14.2 3.1 6.82 G 2 KEH 04 1/4 4 33 14.2 3.1 6.82 1 KEH 05 1/8 3/16 28 14.2 1.3 2.86 G 1 KEH 05 1/8 3/16 28 14.2 1.3 2.86 2 KEH 05 1/4 3/16 33 14.2 3.1 6.82 G 2 KEH 05 1/4 3/16 33 14.2 3.1 6.82 1 KEH 06 1/8 6 29.5 16 1.3 2.86 G 1 KEH 06 1/8 6 29.5 16 1.3 2.86 2 KEH 06 1/4 6 35 16 3.1 6.82 G 2 KEH 06 1/4 6 35 16 3.1 6.82 3 KEH 06 3/8 6 36 16 4.2 9.24 G 3 KEH 06 3/8 6 36 16 4.2 9.24 4 KEH 06 1/2 6 41.5 16 8.1 17.82 G 4 KEH 06 1/2 6 41.5 16 8.1 17.82 1 KEH 07 1/8 1/4 29.5 16 1.3 2.86 G 1 KEH 07 1/8 1/4 29.5 16 1.3 2.86 2 KEH 07 1/4 1/4 35 16 3.1 6.82 G 2 KEH 07 1/4 1/4 35 16 3.1 6.82 3 KEH 07 3/8 1/4 36 16 4.2 9.24 G 3 KEH 07 3/8 1/4 36 16 4.2 9.24 4 KEH 07 1/2 1/4 41.5 16 8.1 17.82 G 4 KEH 07 1/2 1/4 41.5 16 8.1 17.82 1 KEH 08 1/8 8 (2) 30 16.7 1.3 2.86 G 1 KEH 08 1/8 8 (2) 30 16.7 1.3 2.86 2 KEH 08 1/4 8 (2) 35 16.7 3.2 7.04 G 2 KEH 08 1/4 8 (2) 35 16.7 3.2 7.04 3 KEH 08 3/8 8 (2) 36 16.7 4.2 9.24 G 3 KEH 08 3/8 8 (2) 36 16.7 4.2 9.24 4 KEH 08 1/2 8 (2) 41.5 16.7 7.9 17.38 G 4 KEH 08 1/2 8 (2) 41.5 16.7 7.9 17.38 1 KEH 09 1/8 3/8 30.5 17.5 1.3 2.86 G 1 KEH 09 1/8 3/8 30.5 17.5 1.3 2.86 2 KEH 09 1/4 3/8 35.5 17.5 3.2 7.04 G 2 KEH 09 1/4 3/8 35.5 17.5 3.2 7.04 3 KEH 09 3/8 3/8 37 17.5 4.2 9.24 G 3 KEH 09 3/8 3/8 37 17.5 4.2 9.24 4 KEH 09 1/2 3/8 42.5 17.5 7.7 16.94 G 4 KEH 09 1/2 3/8 42.5 17.5 7.7 16.94 1 KEH 10 1/8 10 30.5 17.5 1.3 2.86 G 1 KEH 10 1/8 10 30.5 17.5 1.3 2.86 2 KEH 10 1/4 10 35.5 17.5 3.2 7.04 G 2 KEH 10 1/4 10 35.5 17.5 3.2 7.04 3 KEH 10 3/8 10 37 17.5 4.3 9.46 G 3 KEH 10 3/8 10 37 17.5 4.3 9.46 4 KEH 10 1/2 10 42.5 17.5 7.5 16.5 G 4 KEH 10 1/2 10 42.5 17.5 7.5 16.5 2 KEH 12 1/4 12 41 23 3.2 7.04 G 2 KEH 12 1/4 12 41 23 3.2 7.04 3 KEH 12 3/8 12 42.5 23 4.3 9.46 G 3 KEH 12 3/8 12 42.5 23 4.3 9.46 4 KEH 12 1/2 12 48 23 7.4 16.28 G 4 KEH 12 1/2 12 48 23 7.4 16.28 2 KEH 13 1/4 1/2 41 23 3.2 7.04 G 2 KEH 13 1/4 1/2 41 23 3.2 7.04 3 KEH 13 3/8 1/2 42.5 23 4.3 9.46 G 3 KEH 13 3/8 1/2 42.5 23 4.3 9.46 4 KEH 13 1/2 1/2 48 23 7.4 16.28 G 4 KEH 13 1/2 1/2 48 23 7.4 16.28 3 KEH 58 3/8 5/8 43.5 24.5 4.4 9.68 G 3 KEH 58 3/8 5/8 43.5 24.5 4.4 9.68 4 KEH 58 1/2 5/8 49 24.5 7.2 15.84 G 4 KEH 58 1/2 5/8 49 24.5 7.2 15.84 5 KEH 58 3/4 5/8 51 24.5 9.8 21.56 G 5 KEH 58 3/4 5/8 51 24.5 9.8 21.56 3 KEH 16 3/8 16 43.5 24.5 4.4 9.68 G 3 KEH 16 3/8 16 43.5 24.5 4.4 9.68 4 KEH 16 1/2 16 49 24.5 7.2 15.84 G 4 KEH 16 1/2 16 49 24.5 7.2 15.84 5 KEH 16 3/4 16 51 24.5 9.8 21.56 G 5 KEH 16 3/4 16 51 24.5 9.8 21.56 3 KEH 18 3/8 18 43.5 24.5 4.4 9.68 G 3 KEH 18 3/8 18 43.5 24.5 4.4 9.68 4 KEH 18 1/2 18 49 24.5 7 15.4 G 4 KEH 18 1/2 18 49 24.5 7 15.4 5 KEH 18 3/4 18 51 24.5 9.8 21.56 G 5 KEH 18 3/4 18 51 24.5 9.8 21.56 4 KEH 19 1/2 3/4 49 24.5 7.2 15.84 G 4 KEH 19 1/2 3/4 49 24.5 7.2 15.84 5 KEH 19 3/4 3/4 51 24.5 9.8 21.56 G 5 KEH 19 3/4 3/4 51 24.5 9.8 21.56 6 KEH 19 1 3/4 56.5 24.5 25 55 G 6 KEH 19 1 3/4 56.5 24.5 25 55 4 KEH 20 1/2 20 49.5 25.5 7.2 15.84 G 4 KEH 20 1/2 20 49.5 25.5 7.2 15.84 5 KEH 20 3/4 20 51 25.5 9.9 21.78 G 5 KEH 20 3/4 20 51 25.5 9.9 21.78 6 KEH 20 1 20 57 25.5 25.9 56.98 G 6 KEH 20 1 20 57 25.5 25.9 56.98 5 KEH 22 3/4 22 52 26 10 22 G 5 KEH 22 3/4 22 52 26 10 22 5 KEH 23 3/4 7/8 52 26 10 22 G 5 KEH 23 3/4 7/8 52 26 10 22 5 KEH 25 3/4 25 57 31.5 10.1 22.22 G 5 KEH 25 3/4 25 57 31.5 10.1 22.22 5 KEH 26 3/4 1 57 31.5 10.1 22.22

G 5 KEH 26 3/4 1 57 31.5 10.1 22.22

(1) (2) PAG. 21

megalokr o mecesar

- 19 -

KBE ENLACE MIXTO PIPEMALE PIPE WELD CONNECTOR KCS CODO MIXTO PIPE

MALE PIPE WELD ELBOW


BW (3) Tubo A B C Kg. Lbs. Ref

BW (3) Tubo A B C D Kg. Lbs. 1 KBE 03 1/8 1/8 36.3 13.3 15.5 2.03 4.47 1 KCS 03 1/8 1/8 24.5 13.3 15.5 25 2.93 6.54 1 KBE 04 1/8 4 37.3 13.9 15.5 2.13 4.68 1 KCS 04 1/8 4 25.3 13.9 15.5 25 3.23 7.1 1 KBE 05 1/8 3/16 37.3 13.9 15.5 2.32 5.1 1 KCS 05 1/8 3/16 25.3 13.9 15.5 25 3.42 7.52 1 KBE 06 1/8 6 39.1 15.5 15.5 2.63 5.78 1 KCS 06 1/8 6 27 15.5 15.5 25 3.73 8.2 2 KBE 06 1/4 6 41.1 15.5 17 3.63 7.98 2 KCS 06 1/4 6 27 15.5 15 26 4.93 10.84 3 KBE 06 3/8 6 41.6 15.5 17 4.63 10.18 3 KCS 06 3/8 6 29.5 15.5 15 28.5 5.43 11.94 1 KBE 07 1/8 1/4 39.1 15.5 15.5 2.8 6.16 1 KCS 07 1/8 1/4 27 15.5 15.5 25 4 8.8 2 KBE 07 1/4 1/4 41.1 15.5 17 3.7 8.14 2 KCS 07 1/4 1/4 27 15.5 25 26 5.2 11.44 3 KBE 07 3/8 1/4 41.6 15.5 17 4.5 9.9 3 KCS 07 3/8 1/4 29.5 15.5 15 28.5 5.5 12.1 2 KBE 08 1/4 8 (2) 41.8 16.5 17 4.14 9.1 2 KCS 08 1/4 8 (2) 28.8 16.5 15 27 5.44 11.96 2 KBE 09 1/4 3/8 43.3 17.3 17 4.93 10.85 2 KCS 09 1/4 3/8 30.7 17.3 17 28 6.23 13.71 3 KBE 09 3/8 3/8 43.3 17.3 17 5.53 12.17 3 KCS 09 3/8 3/8 31.2 17.3 15 28.5 6.73 14.81 4 KBE 09 1/2 3/8 45.8 17.3 18.5 8.93 19.65 4 KCS 09 1/2 3/8 32.2 17.3 16.5 31 8.73 19.21 2 KBE 10 1/4 10 43.8 17.3 17 5.8 12.76 2 KCS 10 1/4 10 31.2 17.3 16.5 28.5 6.3 13.86 3 KBE 10 3/8 10 43.8 17.3 17 5.8 12.76 3 KCS 10 3/8 10 31.2 17.3 15 28.5 6.9 15.18 4 KBE 10 1/2 10 45.8 17.3 18.5 8.8 19.63 4 KCS 10 1/2 10 32.2 17.3 16.5 31 9 19.8 2 KBE 12 1/4 12 46.3 22.5 17 7.24 15.92 2 KCS 12 1/4 12 35.7 22.5 17 32.5 8.24 20.32 3 KBE 12 3/8 12 46.3 22.5 17 7.44 16.36 3 KCS 12 3/8 12 35.7 22.5 17 32.5 9.54 20.98 4 KBE 12 1/2 12 47.8 22.5 18.5 9.44 20.76 4 KCS 12 1/2 12 35.7 22.5 16.5 32.5 9.84 21.64 2 KBE 13 1/4 1/2 46.3 22.5 17 7.54 16.58 2 KCS 13 1/4 1/2 35.7 22.5 17 32.5 9.47 20.83 3 KBE 13 3/8 1/2 46.3 22.5 17 7.67 16.87 3 KCS 13 3/8 1/2 35.7 22.5 17 32.5 9.97 21.93 4 KBE 13 1/2 1/2 47.8 22.5 18.5 7.87 17.31 4 KCS 13 1/2 1/2 35.7 22.5 16.5 32.5 10.47 23.03

KSW ENLACE MIXTO TUBOTUBE SOCKET WELD UNION KSS CODO MIXTO TUBO

TUBE SOCKET WELD ELBOW


T. SW Tubo A B C Kg. Lbs. Ref.

T. SW Tubo A B C D Kg. Lbs. 07 KSW 03 1/4 1/8 29.8 13.3 7 2.23 4.91 07 KSS 03 1/4 1/8 24.5 13.3 7 21.5 2.63 5.79 06 KSW 06 6 6 32.6 15.5 7 2.53 5.56 06 KSS 06 6 6 27 15.5 7 21.5 3.23 7.1 07 KSW 07 1/4 1/4 32.6 15.5 7 2.7 5.94 07 KSS 07 1/4 1/4 27 15.5 7 21.5 3.3 7.26 09 KSW 09 3/8 3/8 37.8 17.3 8 4.33 9.53 09 KSS 09 3/8 3/8 30.7 17.3 8 24.5 6.43 14.15 10 KSW 10 10 10 37.8 17.3 8 4.5 9.9 10 KSS 10 10 10 31.2 17.3 8 24.5 6.6 14.52 12 KSW 12 12 12 42.8 22.5 9.5 7.24 15.92 12 KSS 12 12 12 35.7 22.5 9.5 28 9.74 21.42 13 KSW 13 1/2 1/2 42.8 22.5 9.5 7.57 16.65 13 KSS 13 1/2 1/2 35.7 22.5 9.5 28 9.97 21.93 19 KSW 19 3/4 3/4 45.3 24.1 10 14.2 30.84 19 KSS 19 3/4 3/4 40.2 24.1 10 35 22.32 49.1 20 KSW 20 20 20 46.3 25.6 10 14.73 32.4 20 KSS 20 20 20 40.2 25.6 10 35 23.23 51.1 26 KSW 26 1 1 55 31.7 15 26.52 58.34 26 KSS 26 1 1 49 31.7 15 41 42.52 93.54

(1) (2) (3) PAG. 21

megalokr o mecesar

- 20 -

KET TUERCA EXAGONAL NUT KTG

TUERCA GRAFILADA KNURLED NUT

Conex. Dimensión Peso (1) 100 Und. Conex. Dimensión Peso (1) 100 Und. Ref.

Tubo A Kg. Lbs. Ref.

Tubo A Kg. Lbs. 03 KET 1/8 11.9 0.66 1.45 03 KTG 1/8 11.9 0.61 1.34 04 KET 4 11.9 0.71 1.56 04 KTG 4 11.9 0.67 1.47 05 KET 3/16 11.9 0.68 1.49 05 KTG 3/16 11.9 0.63 1.38 06 KET 6 12.7 0.99 2.17 06 KTG 6 12.7 0.95 2.09 07 KET 1/4 12.7 0.97 2.13 07 KTG 1/4 12.7 0.92 2.02 08 KET 8 (2) 13.5 1.32 2.9 08 KTG 8 (2) 13.5 1.17 2.57 09 KET 3/8 14.5 1.73 3.8 09 KTG 3/8 14.5 1.28 2.81 10 KET 10 15 1.87 4.11 10 KTG 10 15 1.47 3.23 12 KET 12 17.5 2.63 5.78 12 KTG 12 17.5 2.38 5.23 13 KET 1/2 17.5 2.53 5.56 13 KTG 1/2 17.5 2.23 4.9 58 KET 5/8 17.5 2.89 6.35 58 KTG 5/8 17.5 2.59 5.69 16 KET 16 17.5 2.87 6.31 16 KTG 16 17.5 2.57 5.65 18 KET 18 17.5 4.82 10.6 18 KTG 18 17.5 4.52 9.94 19 KET 3/4 17.5 4.64 10.2 19 KTG 3/4 17.5 4.24 9.32 20 KET 20 17.5 4.77 10.49 20 KTG 20 17.5 4.47 9.83 22 KET 22 17.5 4.4 9.68 22 KTG 22 17.5 4 8.8 23 KET 7/8 17.5 4.36 9.59 23 KTG 7/8 17.5 3.96 8.71 25 KET 25 20.6 7.88 17.33 25 KTG 25 20.6 7.48 16.45 26 KET 1 20.6 7.77 17.09 26 KTG 1 20.6 7.37 16.21

KFP ANILLO POSTERIOR BACK FERRULE

KFA ANILLO ANTERIORFROT FERRULE

Conex. Peso (1) 100 Und. Conex. Peso (1) 100 Und. Ref.

Tubo Kg. Lbs. Ref.

Tubo Kg. Lbs. 03 KFP 1/8 0.025 0.055 03 KFA 1/8 0.045 0.099 04 KFP 4 0.030 0.066 04 KFA 4 0.054 0.118 05 KFP 3/16 0.034 0.074 05 KFA 3/16 0.062 0.136 06 KFP 6 0.041 0.090 06 KFA 6 0.074 0.162 07 KFP 1/4 0.043 0.094 07 KFA 1/4 0.078 0.171 08 KFP 8 (2) 0.053 0.116 08 KFA 8 (2) 0.095 0.209 09 KFP 3/8 0.061 0.134 09 KFA 3/8 0.111 0.244 10 KFP 10 0.064 0.140 10 KFA 10 0.116 0.255 12 KFP 12 0.12 0.264 12 KFA 12 0.276 0.60 13 KFP 1/2 0.13 0.286 13 KFA 1/2 0.290 0.638 58 KFP 5/8 0.16 0.352 58 KFA 5/8 0.355 0.781 16 KFP 16 0.16 0.352 16 KFA 16 0.357 0.785 18 KFP 18 0.18 0.396 18 KFA 18 0.398 0.875 19 KFP 3/4 0.19 0.418 19 KFA 3/4 0.419 0.921 20 KFP 20 0.2 0.44 20 KFA 20 0.438 0.963 22 KFP 22 0.21 0.462 22 KFA 22 0.479 1.053 23 KFP 7/8 0.22 0.484 23 KFA 7/8 0.483 1.062 25 KFP 25 0.34 0.748 25 KFA 25 1.043 2.294 26 KFP 1 0.35 0.77

26 KFA 1 1.059 2.329

(1) (2) PAG. 21

megalokr o mecesar

- 21 -

VARIOS

Fabricados en latón según normas ASME B16.15. Presión máxima de trabajo 25 BAR. Made in brass according to ASME B16.15. Maximum work pressure 25 BAR.

Meceplastr Especial para instalaciones con tubería de plástico. Se fabrica en latón. Specially designed for plastic tubing works. It is made in brass.

MUELLER BRASS CO.

Accesorios de cobre para soldar. Según ASME B16.22 ó de bronce según B16.18. Copper fitting for welding, according to ASME B16.22 or bronze as per B16.18.

megaraco Accesorios de latón para tubo de cobre hasta 25 m.m. y en pulgadas hasta 1/2”O.D. Brass fittings for Koper tube up to 25 m.m. and in inches up to 1/2”O.D.

meceWELDr

Fabricados en acero inox. grado 316 ó acero carbono para soldar a tubing. Made in 316 stainless steel, or carbon steel for tubing welding.

MECEprimo Serie ligera, fabricada en acero inox. grado 316 ó acero carbono. Conex. roscadas. Light series made in 316 stainless steel or carbon steel, screwed connections.

SERIE 2000 – 3000 – 6000 – 9000

Realizada según normas ASME B16.11. Conexiones roscadas y para soldar en acero inox. grado 316 y acero carbono. Made as per ASME Norm B16.11. Screwed connections and for socket welding with 316 stainless steel and carbon steel.

NOTAS: / NOTES: (1) Para obtener los pesos de los accesorios en latón, multiplicar el peso indicado en las tablas correspondientes al

tipo de accesorio deseado por el coeficiente 1,07. In order to obtain the brass fitting weights, multiply the weight specified in the tables of fitting by the coefficient 1,07.

(2) Los accesorios para tubo de diámetro 5/16 O.D. corresponde tambien al tubo de 8 O.D. The fittings for diameter 5/16 O.D. tube are the same as for diameter 8 O.D. tube

(3) Accesorio preparado para soldar a tope (PIPE) SCH. 160 ó soldar a solape. Fitting prepared for butt welding schedule 160 pipe or socket welding pipe.

Nos reservamos el derecho de modificar, previa causa justificada, alguna de las dimensiones no sujetas a normas determinadas. We reserve the right to modify, on account of a justified reason, some of the dimensions not subject to specifical norms.

megalokr o mecesar

- 22 -

VÁLVULAS DE AGUJA MÓVIL Presión hasta 3600 PSI (250 Bar) en acero inox. grado 316 y acero carbono, 1785 PSI (125 Bar) para las válvulas de latón. NEEDLE VALVE Pressure up to 3600 PSI (250 Bar) in 316 stainless steel and carbon steel, 1785 PSI (125 Bar) for the brass valves.

MANIFOLDS Para instrumentos de presión, conexiones roscadas o acoplamiento al aparato. MANIFOLDS For pressure instruments, screwed connections or devices couplings.

VÁLVULAS MEGALDAP Conexiones roscadas y con accesorios MEGALOK presión de hasta 5000 PSI (350 Bar). MEGALDAP VALVE Screwed connections and with MEGALOK fiting. Pressure up to 5000 PSI (350 Bar).

VÁLVULAS MC Válvulas para instrumentos de presión conexiones HxH y MxH 1/2”NPT. MC VALVES Valves for pressure instruments. FxF and MxF 1/2”NPT connections.

GRIFOS MECEAIR Fabricados en latón, adecuados para líneasa de aire comprimido y líquidos a baja presión. MECEAIR COCKS Made in brass, suitable for compressed air and low pressure liquid lines.

VÁLVULAS 10.000 PSI Válvulas de punzón destinadas a trabajos de alta presión en acero inox. grado 316, acero carbono y latón. 10.000 PSI VALVES Disc valves designed for hig pressure service in 316 stainless steel, carbon steel and brass.

VÁLVULAS PARA MANÓMETRO Presión hasta 5140 PSI (360 Bar) para acero inox. grado 316 y acero carbono, 3140 PSI (220 Bar) para válvulas en latón. GAUGE VALVES Pressure up to 5140 PSI (360 Bar) for stainless steel grad 316 and carbon steel, 3140 PSI (220 Bar) for brass valves.

VÁLVULAS DE MEMBRANA Muy apropiada para instalaciones de aire, gas y aceites de baja presión. MEMBRANA VALVE Very suitable for low pressure air, gaz or oil systems.

VÁLVULAS DE RETENCIÓN Con pistón perpendicular o paralelo a la línea de flujo, Se fabrican en acero inox. grado 316, acero carbono y latón. CHECK VALVES With piston parallel or perpendicular to the flow line. They are made in 316 stainless steel, carbon steel and brass.

VÁLVULAS DE PASO DIRECTO Con asiento cónico de PTFE para presiones máximas de 105 Bar. DIRECT GATE VALVE With conic PTFE seat for maximum pressures of 105 Bar.

VÁLVULAS MECEFLOW En latón, presión máxima 16 Bar. En acero inox. grado 316, 25 Bar. MECEFLOW VALVES In brass, maximum pressure 16 Bar. In 316 stainless steel 25 Bar.

AMORTIGUADOR DE PRESIÓN Destinados a controlar las variaciones bruscas de presión. PRESSURE DAMPER Designed to control the suden pressure variations.

VÁLVULAS DE BOLA De 2 y 3 vías en latón y 2 vías en acero inox. Presiones máximas de 30 y 40 Bar respectivamente. BALL VALVES In brass with e and 3 ways and in stainless steel with 2 way. Maximum pressures of 30 and 40 Bar respectively.

POTES Y COLECTORES De condensación y sellado de acuerdo con normas ASME B31.1 e ISA–RP 3.1. CONDENSATION AND GAUGING POTS AND COLLECTORS As per ASME NORMS B31.1 and ISA–RP 3.1.

DISCOS DE RUPTURA BS & B Elemento de seguridad cuando haya peligro de sobrepresión en compresores, tuberías, colectores, etc.

RUPTURE DISK BS & B Security device against overpressure dangers in compressors, pipings, collectors, etc.

VARIOS Abrazaderas, sifones, tuberías, bridas, purgadores, etc. OTHERS “U” bolts, siphons, pipings, flanges, drains, etc

C.3 (Rev.1 - Ed. 1 - 05) · cierre, facilita la instalación del accesorio y evita el gripaje entre...

Documents

Transcript of C.3 (Rev.1 - Ed. 1 - 05) · cierre, facilita la instalación del accesorio y evita el gripaje entre...