Coruspro Katalog En

download Coruspro Katalog En

of 8

description

Dynacord

Transcript of Coruspro Katalog En

  • english

    CPCP 12-212-2CPCP 12-312-3CPCP 15-315-3

    CPCP 12-1 Sub12-1 SubCPCP 15-1 Sub15-1 SubCPCP 18-1 Sub18-1 Sub

    M 12M 12AM 12AM 12

    Sub 800 Sub 800 AA

  • The CORUS-PRO Line is the consequent continuation of the CORUS-Line loudspeaker series. Specially opti-mized frequency crossovers and optimised protection circuitry result in superb sonic performance and reliabi-lity.

    Additional components like the AM 12 active monitor system and the SUB 800 A active subwoofer completethe CORUS-PRO Line, allowing the trouble-free creation of active 2-way sound system installations.

    The extremely mar-resistant lacquer-finished surfaces and robust powder-coated steel front-grilles of allCORUS-PRO components as well as the straight frontages and castors of the big woofer cabinets ensureultimate transportability.

    All CORUS-PRO Line full-range models are equipped with pole-mount adapters on the bottom while all woo-fer cabinets provide pole-mount threaded flanges for the insertion of top-part connection poles on the top.Electrical connection is established via the pins 1+/1- of two NL4 sockets ( IN/OUT ) connected in parallel.

    CP 12-2

    CP 15-3

    CP 12-3

    CP 12-1

    CP 18-1

    AM 12 SUB 800 A

    CP 15-1

    M 12

  • CP 12-2

    CP 15-3

    CP 12-3

    CP 12-1

    CP 18-1

    AM 12SUB 800 A

    CP 15-1

    M 12The diagram shows the individual frequency respon-ses of a CP 18-1 with 100 Hz PowerMax crossover aswell as the frequency response of the summed sonicsignals.

    All CORUS-PRO Line bass cabinets employ passive frequencyx-overs that guarantee the optimized parallel operation with thefull-range cabinets. The transition frequencies between fullrangeand woofer cabinet are carried out in PowerMax technology, sothat even smaller sound system installations provide exceptio-nally powerful bass-performance.

    equipped

  • CPCP 12-212-22-way fullrange and MID/HIGH speaker system, 150 W

    This extremely compact vented enclosu-re is equipped with a 12" DYNACORDwoofer and a constant directivity hornwith a 90 x 40 nominal angle of disper-sion. It can be employed universally forthe configuration of small stage systems.The asymmetrical footprint of this cabinetalso allows for floor monitor applicationswhere extended low frequency responseis required.Impressive results can be obtained bycombining it with the 12 CP 12-1 SUB or15 CP 15-1 SUB subwoofers, which canbe operated in parallel without additionalcrossovers.

    CPCP 12-312-33-way fullrange and MID/HIGH speaker system,200 W

    The CP 12-3 is the ideal all-round enclosure.Equipped with a 12 DYNACORD woofer, two 4.5Mid/High drivers in a CMD configuration (ColumnarMidrange Design) and a constant directivity hornwith a nominal angle of dispersion of 90 x 40, thesystem is remarkable for its extraordinarily speechintelligibility and precise resolution in the criticalmidrange frequencies. The CMD design offers awide angle of horizontal dispersion (160).The CP 12-3 can be operated directly in parallelwith the CP 15-1 SUB or CP 18-1 SUB. The CP 18-1 SUB in particular provides an ideal complementfor the creation of an active 2-way system whencombined with a PowerMax 230 crossover andpower amplifiers from the Standard or LinearPrecision series.

    CPCP 15-315-33-way fullrange speaker system, 400 W

    The "Fifteen-Three the classic among3-way speaker systems. It is equippedwith a 15 Electro-Voice DL 15Y LF dri-ver, a 10 midrange driver and a driver +constant directivity horn with a nominalangle of dispersion of 90 x 40. Thiscombination ensures a powerful bass,excellent projection in the midrange anda precise uncolored treble.Ideal partners for the configuration of active 2-way systems are the CP 15-1 SUB or CP 18-1 SUB sub-wooferscombined with the PowerMax 230 cros-sover and power amplifiers from theStandard or Linear Precision ranges.

    Columnar Midrange Design

  • CPCP 12-1 Sub12-1 Sub12" supplementary bass enclosure,300 W

    The vented LF enclosure is the idealcomplement for the CP 12-2, CP 12-3and other small satellites when additionalpower is needed for the reproduction oflow frequencies.It is equipped with a 12 LFT 6008 woo-fer and a passive crossover (12 dB low-pass / 100 Hz) using PowerMax techno-logy and can therefore be operateddirectly in parallel to the CP 12-2 F-spea-ker system. On account of its modestdimensions and high power handling(300 W), it combines impressive low fre-quency reproduction with ultra-compac-tness.

    CPCP 15-1 Sub15-1 Sub15" direct-radiating sub-woofer, vented,400 W

    The CP 15-1 is equipped with a 15Electro-Voice DL 15Y woofer capable ofhigh power handling and is the ideal com-plement to the CP 12-3 or CP 15-3 spea-ker systems in passive operation. The integrated passive crossover (12 dBlow-pass / 100 Hz) using PowerMax tech-nology in combination with the named full-range cabinet results in powerful and pre-cise live bass reproduction.

    CPCP 18-1 Sub18-1 Sub18" direct radiating sub-woofer, bass-reflex, 500 W

    Equipped with an 18 Electro-Voice EVX 180 B high excursion chassis, the CP 18-1 SUB is a direct radiating sub-woofer in a vented enclosure andproduces a deep bass with impressiveprecision.With the integrated passive crossover(12 dB low-pass / 100 Hz), this subwoo-fer is ideally suited to the construction ofpassive systems (in combination with theCP 12-3 or CP 15-3) as well as for active2-way systems with the PowerMax 230crossover and power amplifiers from theStandard or Linear Precision series.

    AM 12AM 12Active 2-way monitor system, 360 W

    The perfect Plug&Play monitor solution for a wide range of applications. The AM 12 is equipped with a 12" Dynacord LFT 3008 wooferand a driver + constant directivity MF/HF-horn. The integrated full-range power amplifier in class "H" technology delivers 300 watts tothe Lo channel and the HF amplifier delivers 60 watts for the Hi channel. Thanks to the many and diverse connection options and possible settings (Mic, Line and Aux) as well as the possibility of combining theunit with the M 12 passive monitor enclosure, possible applications range from a complete monitor system to a small PA. Additional toolsare offered in the ACOUSTIC PROCESSING section: The Lo-EQ is an adhustable LPN-filter controlling the "punch", the MID-EQ as a4kHz DIP-filter allows to adjust the aggressivity of the horn, while the HI-EQ gives you the control on the "clarity" of the Highs.

    M 12M 122-way full-range horn-monitor enclosure, 150 W

    This 2-way monitor enclosure is the all-rounder in the monitor range and offers high sound pressure levels combined with very goodintelligibility. Equipped with a 12" Dynacord LFT 3008 woofer and a driver + constant directivity MF/HF-horn with a nominal angle ofdispersion of 90x 40, the M 12 is the ideal extension to the AM 12 active 2-way monitor system and is driven directly by the internalfull-range power amplifier of the AM12.

  • SUB 800 ASystem and Cabinet Specifications:

    SPL 1W/1m 100dBMax. SPL 1m (Cont.Prog.) 128dBFrequency Range (-10dB)Woofer Electro-Voice DL15Y (361142)Cabinet Style 16mm Mediapan

    4 rubber feet,4 transport castors2 handle1 speaker-stand threaded flange

    Outfit Cabinet surface black varnished Powder coated steel grille

    Dimensions (W x H x D) 431 x 601 x 664 mmWeight 43 kg

    Power Amplifier -, Inputs - and Crossover - Specifications

    Max. Dynamic Output Power (IHF-A) 800WMax. Continuous Output Power(THD=1%,100Hz) 540WPower Amplifier Design High Efficiency, Class HTHD+N, rated < 0.05%Input Impedance (balanced) 20kohmsOutput Impedance (mid-high) 75 ohms, fully-balancedCrossover, active-stereo PowerMax12*, 100HzCooling Convection cooled, passiveProtection Audio limiter, High temperature,

    DC, HF, Back-EMF, Peak-current limiters, Inrush current limiter, Turn-on delay, Voice coil protection (TBC)

    Power Requirements 230V, 50HzPower Consumption 200WWarranty 36 months

    * Patents pending

    CPCP Sub 800 Sub 800 AAThe SUB 800 A is an active sub-woofer with a 15" driver, active PowerMax ste-reo crossover and integrated power amplifier. With the SUB 800 A, full-rangesystems - for example those using a PowerMate or mixer- power amplifier com-binations - can be extended very simply to form an active stereo 2-way systemwith a sub-woofer. The SUB 800 A can also be used in parallel to an existingsystem to provide powerful reinforcement of the low frequency range.

    The integrated electronic stereo 2-way crossover, which employs PowerMaxtechnology, divides the signal into mono-sub and stereo mid/high frequency ran-ges. From the mid/high output terminals of the SUB 800 A in active 2-way mode,the mid/high signal is directed to the Master Return sockets of the mixer orPowerMate to be amplified. The Mono-Sub signal, summed from the L/R chan-nels, is directed to the integrated power amp.

    The recessed integrated High Efficiency poweramplifier is rated at 800 watts (max. continuousoutput power IHF-A) and features Class H circuittopology. Driven in this way, the Electro Voice 15"DL 15 Y woofer delivers a maximum SPL of 128dB / 1 m.

    Naturally the SUB 800 A is also equipped withevery known type of protective circuitry including adynamic audio limiter, TBC, Back EMF, DC, HFand short circuit as well as thermal protections anda halogen speaker protector and thermoswitch.

    The enclosure of the SUB 800 A is sealed withextremely durable black structural lacquer. Fourlarge castors at the back and two recessed metalhandles ensure easy and comfortable handling.

  • CP 12-2 CP 12-3 CP 15-3 CP 12-1 Sub CP 15-1 Sub CP 18-1 Sub

    Power capacity:RMS 150W 200W 400W 300W 400W 500WCont.Program 300W 400W 800W 600W 800W 1000WSPL (Sound pressure level):1W/1m (IEC 268-5) 97dB 98dB 102dB 96dB 100dB 98dBMax. SPL (calculated Cont. Prog.) 122dB 124dB 131dB 124dB 129dB 128dBImpedance:

    Nominal 8 Ohms 8 Ohms 8 Ohms 8 Ohms 8 Ohms 8 OhmsFrequency range:- 10 dB 70Hz - 18kHz 50Hz - 18kHz 50Hz - 18kHz 60Hz - 280Hz 48Hz - 280Hz 40Hz - 280HzCrossover frequencies:Int. Passive X-Over Freq. 4kHz 700Hz/4kHz 400Hz/4kHz 100Hz, 12dB/Oct. 100Hz, 12dB/Oct. 100Hz, 12dB/Oct.Rec. Active X-Over Freq. - dB/oct 100Hz, 12dB/Oct. 100Hz, 12dB/Oct. 100Hz, 12dB/Oct. 100Hz, 12dB/Oct. 100Hz, 12dB/Oct. 100Hz, 12dB/Oct.Components:Components HI HFT 3008 HFT 3008 HFT 3008EDV # 347 489 347 489 347 489Components MID 2x MFT 8004 MFT2008EDV # 337 757 330 983Components L0 LFT 3008 LFT 3008 DL15Y LFT 6008 DL15Y EVX180BEDV # 330 499 330 499 343 049 358 499 343 049 349 397Connectors:Input - Output 2x NL4MP Pin 1+/- 2x NL4MP Pin 1+/- 2x NL4MP Pin 1+/- 2x NL4MP Pin 1+/- 2x NL4MP Pin 1+/- 2x NL4MP Pin 1+/-Dimensions:B x H x T ( mm ) incl. Fsse 357*511*335 412*617*322 502*727*362 357*511*410 431*601*664 512*721*664Weight:Net weight ( kg ) 17,5 24,5 35 20 34,5 44,5Outfit:Material Mediapan 16mm Mediapan 16mm Mediapan 16mm Mediapan 16mm Mediapan 16mm Mediapan 16mmDesign varnished black varnished black varnished black varnished black varnished black varnished blackPole-mount-threaded-flange 1 2 1Pole-mount-stand-adapter 1 1 1Handles 1 1 2 2 2 4Grille Steel Steel Steel Steel Steel SteelWheels 4 4Warranty: 36 month 36 month 36 month 36 month 36 month 36 month

    AM 12 Amplifiers at rated conditions, 4W loads on fullrange- and 8W loads on hf-amplifier, acoustic processing in 0 position, unless otherwise specified.

    Fullrange Amplifier High Frequency AmplifierMinimum Load ImpedanceExternal Speaker 8 -Maximum Midband Output PowerTHD=1% 300W (1kHz) 50W (20kHz)Rated Output Power THD10k

    AUX: 8kPower Requirements 230V, 50HzProtection Audio limiters, High temperature, DC, HF, Back-EMF,

    Peak current limiters, Inrush current limiters, Turn-on delay,speaker protection

    Cooling convection cooledSafety Class IDimensions(W x H x D), mm 530.5 x 355 x 344Weight 21 kg

    M 12

    Nominal impedance 8

    Program power capacity 300W

    Rated power capacitiy RMS 150W

    SPL 1W/1m 100dB

    Max. SPL 1m 125 dB (calculated

    Frequency range (-10 dB) 80Hz - 18kHz

    Crossover frequency 4kHz

    Components Lo DynacordLFT 3008 (330 499)

    Components Hi DynacordHFT 3008 (347 489)

    Connections 2 x Speakon connetctors

    Cabinet style 16mm Mediapan1 handle, 8 rubber feet

    Outfit Cabinet surface black varnishedPowder-coated steel grille

    Dimensions (WxHxD) 530,5 x 355 x 344

    Weight 16 kg

    Warranty 36 month

  • USA Telex Communications Inc., 12000 Portland Ave. South, Burnsville, MN 55337, Phone: +1 952-884-4051, FAX: +1 952-884-0043Germany Telex EVI Audio, Hirschberger Ring 45, D 94315, Straubing, Germany, Phone: 49 9421-706 0, FAX: 49 9421-706 265U.K. Shuttle Sound, The Willow Centre, Willow Lane, Mitcham GB Survey Phone: +44 20 864 671 14, FAX: +44 20 864 075 83France EVI France S. A., Parc de Courcerin, Allee Lech Walesa, Lognes, F-77185 Marne La Vallee, France, Phone: 33/1-6480-0090, FAX: 33/1-6006-5103Australia EVI Audio (Austl.), Unit 23, Block C, Slough Business Estate, Silverwater N.S.W. 2128, Australia, Phone: 61/2-9648-3455, FAX: 61/2-9648-5585Hong Kong EVI Audio Limited, Unit E & F, 21/F, Luk Hop Industrial Bldg., 8 Luk Hop St., San Po Kong, Kowloon, Hong Kong, Phone: 852-2351-3628, FAX: 852-2351-3329Japan EVI Audio Japan, Ltd.,5-3-8 Funabashi, Setagaya-ku, Tokyo, 156-0055 Japan, Phone: 81-3-5316-5020, FAX: 81-3-5316-5031Singapore Telex Communications, 3015A Ubi Rd 1, 05-10, Kampong Ubi Industrial Estate, Singapore 408705, Phone: 65-746-8760, FAX: 65-746-1206Mexico Av. Parque Chapultepec #66-201, Naucalpan Edo. Mex. 53390, Phone: (52) 5358-5434, FAX: (52) 5358-5588Africa Mid-East Telex EVI Audio, Hirschberger Ring 45, D 94302, Straubing, Germany, Phone: 49 9421-706 0, FAX: 49 9421-706 265Latin America Telex Communications Inc., 12000 Portland Ave. South, Burnsville, MN 55337, Phone: +1 507 526 3205, FAX: +1 507 526 3059

    20

    02 by TE

    LEXEV

    I Aud

    io GmbH

    02/03

    /5 Su

    bject to

    chan

    ge withou

    t prio

    r notice Printed

    in Germ

    any

    Art. Nr. 16

    2 06

    5

    www.dynacord.de

    PowerMate 600

    PowerMate 1000

    No.

    1No.

    2

    PowerMate 600 with 2 x CP 12-2 Passive configuration with 600 wattsof amplification for small events.

    PowerMate 1000 with 2 x CP 12-3 and Sub 800 A Active configuration with 1000 watts of +800 watts amplification for medium large events.

    PowerMax 230

    No.

    3

    PowerMax 230 and 2 x S 1200 Active two-way configuration with 2400watts of amplification for larger events and longer distances.

    S 1200

    S 1200

    CP 12-2 CP 12-2

    CP 12-3

    SUB 800 A

    CP 15-3

    CP 18-1 Sub

    CP 12-3

    CP 15-3

    CP 18-1 Sub