IMS-KÖEPFER, ESTEIRE, S.L. programa de fabricacion de IMS-KÖEPFER

10
ESTEIRE, S.L. Programa de suministro FRESAS MADRE y FRESAS DE DISCO en metal duro (IMS - KOEPFER) ESTEIRE, S.L. MADRID: Paseo de la Habana, 20 - Bajo Izquierda 28036 Madrid Telfs: 91 561 68 66 / 91 561 19 02 FAX: 91 411 73 10 E-mail: [email protected] BARCELONA: Sometens, 2 - 20 / 5º - 3ª 8950 Esplugues de Llobregat (Barcelona) Telf: 649 93 10 38 FAX: 93 204 32 69 E-mail: [email protected]

Transcript of IMS-KÖEPFER, ESTEIRE, S.L. programa de fabricacion de IMS-KÖEPFER

ESTEIRE, S.L.

Programa de suministro FRESAS

MADRE y FRESAS DE DISCO en

metal duro (IMS - KOEPFER)

ESTEIRE, S.L.

MADRID:

Paseo de la Habana, 20 - Bajo Izquierda

28036 Madrid

Telfs: 91 561 68 66 / 91 561 19 02

FAX: 91 411 73 10

E-mail: [email protected]

BARCELONA:

Sometens, 2 - 20 / 5º - 3ª

8950 Esplugues de Llobregat (Barcelona)

Telf: 649 93 10 38

FAX: 93 204 32 69

E-mail: [email protected]

ESTEIRE, S.L. (visiten nuestra página web: http://www.esteire.com/)Página 2

Los tiempos actuales exigen plazos cada vez más cortos y precios más competitivos;aunque sean en productos tan especiales, como son l as FRESAS MADRE oFRESAS MODULARES en metal duro . ESTEIRE, S.L., suministrando los productos denuestra representada IMS - KOEPFER, se ajusta a las necesidades actuales .

Nuestra representada IMS es competitiva porque:

a) Precios muy competitivos, aún comparando con pro veedores que venden susproductos en $. Rogamos tengan en cuenta, que la te ndencia del $ frente al €es revalorizarse; por lo que los cálculos hechos ha ce un par de meses ahora,por ejemplo, el $ se ha revalorizado un 6 % frente al € en cuestión de un par demeses.

b) Plazo de entrega muy competitivo. El plazo de entrega estándar es 9 - 10semanas, frente a las 14 - 16 semanas de la compete ncia . Incluso, hayposibilidad de entrega más corto para unos determin ados rangos. Más abajo,en la presentación en inglés de nuestra representad a IMS, lo recalca (para másinformación, rogamos visiten su página web: http://www.ims-koepfer.com /)

Los productos de nuestra representada IMS son (siempre en metal duro).

a) FRESAS MADRE:

- Para tallado de engranajes: rectos, helicoidales, epicicloidales- Para tallado de cadenas,- Para acanalados: rectos, helicoidales- Para tornillos sin fin: una sola entrada, multientradas- Para aplicaciones especiales.

Desde Calidad A hasta AAARecubiertas con el tipo de recubrimiento que el cliente desee.FRESAS MADRE con agujero o con eje.Con las características que el cliente desee, y si tiene dudas, nosotros le ayudamos adecidir.

b) FRESAS MODULARES:

- Para tallado de engranajes: rectos, helicoidales, etc.- Para tallado de cremalleras.- Para tornillos sinfín: una sola entrada, multientradas.- Para aplicaciones especiales.

Rogamos echen un vistazo a continuación a la presentación de IMS, en inglés.

Estamos a su disposición para cualquier duda.

ESTEIRE, S.L.Paseo de la Habana, 20 - 28036 MadridTelfs: 91 561 68 66 / 91 561 19 02FAX: 91 411 73 10E-mail: [email protected]

The Cutting Edge | Precision and Innovation

Representing one of the leading Specialists in development and production of high precision cutting tools, IMS KOEPFER Cutting Tools shows it´s presence on the nationalmarket as well as on the global market. Sustained thinking characterizes this enterprisejust as well as innovating solutions in all operating areas.

IMS KOEPFER relies on a wide range of manufacture and offers a compact range of toolsmade of HSS, PM-HSS and Carbide. Due to the approved Quality Management SystemDIN EN ISO9001:2008 the quality of our processes and products is assured. Independentof the required quantity, every individual designed tool is subject to the constant highstandard of quality. The modern and innovative machinery and highly motivated employees are the basis for a strong customer focus and a maximum in flexibility.

IMS KOEPFER Cutting Tools GmbH – world-wide partner for success.

Ahead of the future | yesterday, today und tomorrow

In 1863 Johann Morat and four years later Josef Koepfer with theircompanies laid the foundation for today´s enterprise. Its subsidiaries,dealing with manufacturing of gear cutting tools, merged in 2004 toIMS KOEPFER Cutting Tools GmbH – a young and dynamic enterprisewith an extensive tradition. That´s no contradiction: with over 140years of experience in gear cutting and a well-defined concept forthe future. IMS KOEPFER Cutting Tools stands for highest customerfocus and raised awareness for the market-orientation.

1. Software development for gear cutting design

Our constant development of our own soft -ware tools for computing 3D gear cutting designs allows us to meet our customers’ demands at any time.

2. Development in process and production

Based on a systematic analysis and definitionof product requirements of our customers, we are designing effective and reliable process chains. For this we always sound theedge of the technically feasible in conside-ration of newest technologies and a far-reaching advancement in knowledge.

By observing the world-wide market con-stantly and intensively and conversing withour customers we produce tools of the futureand to our customers’ expectations.

3. Process planning and constructionWe use our own software to simulate pro duction processes and transfer gear profiles to tool reference profiles. CAD/CAMsystems safely and reliably transmit the computed profiles to dressing, grinding and gauging machines, providing the bestquality and specially designed tool even for highly complex applications.

4. ProductionWe develop our CNC grinding machines ourselves, which means that we can delivertools in any geometry, from one-off pieces to large mass-produced series. Logarithmic relieving keeps the profile constant over theeffective length.

5. Sharpening and coating serviceOur service affords ultimate regrinding precision and an extended selection of coating materials.

6. Profiling ServiceCutting tools which do not meet the techni-cal requirements anymore due to damagesor mainly failing profile accuracy caused byabrasion can be reworked steadily, quicklyand in high quality.

7. Express ToolsWe support you in maintaining your limitedlead time. In special cases you will recieveour tools shortly after order, including thecoating. Standard profiles are often availablefrom stock, just ask our sales department!

8. Consulting, Service and SalesUse our consulting services before placingthe offer. We work out the best applicationpolicy for your tools and accompany youright to the trial stage in production. Oursales department offers technical compe-tence and advice.

1

Softwaredevelopment forgear cuttingdesign

3

Process planningand construction

4

Production

5

Sharpening andcoating service

6

Profiling Service

7

Express Tools

8

ConsultingServiceSales

2

Development in process and production

Sales and Employees

Facts and figures

Maschinery14 CNC relieving machines3 CNC gauging machines7 CNC sharpening machines4 conventional sharpening machines

Production area2,100 sqm

5.83

7

2000 2001 2002 2003 2004 2005 2006 2007

51

7.33

858

7.20

456

8.19

658

8.21

563

7.84

066

8.35

468

9.53

875

2008

10.1

0876

2009

5.87

670

20101

7.56

066

15 %HSS, PM-HSS

85 % HM (Carbide)

60 % Automotivesuppliers

20 % Supplier of gearcomponents

8 % Job gearcutting

8 % Power tools

Sales in Euro 1,000

Employees

4 %Others

Industry key

Distribution HSS/HM (Carbide)

1 Plan (09/2010)

3h

Blac

k Fo

rest

Suisse Austria

France

Frankfurt

Stuttgart

Zurich

Lake ConstanceBasle

Strasbourg

Freiburg

Geneva

MunichEisenbach

IMS KOEPFER Cutting Tools GmbHHauptstraße 52D –79871 Eisenbach

Phone +49 (0) 7657 81-9Fax +49 (0) 7657 81-33100E-Mail [email protected]

www.ims-koepfer.com

A joint venture of and KOEPFER

IMS

KOEP

FER

Cutt

ing

Tool

s G

mbH

© 0

9/20

10

www.ims-koepfer.com