FCC Week 2018

Amsterdam (NL)1

Ignasi Bellafont1, Patrick Krkotic1, Francis Perez1, Alexander Krasnov2, François Millet3, Mike Barnes4, Francisco

Blanquez4, Giulio Borghello4, Jean-Paul Burnet4, Sergio Calatroni4, Mar Capeans4, Paolo Chiggiato4, Dimitri

Delikaris4, Mario di Castro4, Gilles Favre4, Ruben Garcia Alia, Cédric Garion4, Romain Gerard4, Simone

Gilardoni4, Brennan Goddard4, Georgi Gorine4, Wolfgang Hofle4, Katsiaryna Ilyina-Brunner4, Angelo Infantino4,

Rhodri Jones4, Vasilios Karaventzas4, Roberto Kersevan4, Anton Lechner4, Nicolas Magnin4, Attilio Milanese4,

Yuancun Nie4, Tomasz Podzorny4, Marco Prioli4, Alessandro Masi4, Federico Roncarolo4, Alejandro Sanz Ull4,

Daniel Schoerling4, Andrzej Siemko4, Theo Sinkovits4, Mauro Taborelli4, Laurent Tavian4, Davide Tommasini4, Jan

Uythoven4, David Woog4, Alessandro Leveratto5, Kei Sugita6, M. Angelucci7, Luis Antonio Gonzalez Gomez7,

Roberto Cimino7, Eliana La Francesca7, Luisa Spallino7, Joffre Gutierrez8, Artur Romanov8, Joffre Gutierrez8,

Song Jin9, Alexander Ryazanov10, Oleg Malychev11, Sian Taaj11, Reza Valizadeh11, Judit SZALAI12, Sara

Stelitano13, Ruta Sirvinskaite14, Arturs Ivanovs15, Toms Torims15, Armen APYAN16, Martin Novak17, Dani Barna17.

ALBA1, BINP2, CEA3, CERN4, CNR SPIN5, GSI6, INFN7, ICMAB-CSIC8, IHEP9, NRC “Kurchatov institute”10,

STFC11, U. of Technology and Economics Budapest12, U. of Calabria13, U. of Loughborough14, Riga Technical

University15, North-western University16, Wigner Institute17.

José Miguel Jimenez

FCC Week 2018

Amsterdam (NL)2

FCC Special Technologies

• Study the special technologies at conceptual aspects required for the FCC

accelerator and identify the possible design and performance limitations

for the accelerator.

• Identify challenges, opportunities for technological breakthroughs and

set the R&D program.

• Set up Collaborations to address standard FCC issues and R&D

opportunities

• R&D activities will then be followed in the frame of the Accelerator R&D

3FCC Week 2018

Amsterdam (NL)

Beam vacuum

induced dynamic effects

[WP9]

Beam vacuum

Magnet Cold Bore

(Eurocircol WP4)

[WP1]

CryoPlants

efficiency

[WP2]

Beam transfer

devices

[WP3]

Manufacturing

technologies

[WP4]

Robotics

[WP14]

Surface-Vacuum

parameters

for beam-induced

effects

[WP13]

Architecture for magnets

& machine protection

[WP12]

Radiation Hardness

Assurance

[WP11]

Cryomagnet

insulation

vacuum

[WP10]

Normal

conducting

magnets

[WP5]

Transverse

feedback

[WP6]

Beam dumps

[WP7]

Beam

instrumentation

[WP8]

FCC Special Technologies

FCC Week 2018

Amsterdam (NL)4

Beam vacuum (Eurocircol WP4)

GOAL: complete the conceptual design of the FCC-hh beam-

screen, and its integration in the interconnect area Tuesday morning 08:30 talks on EuroCirCol

FCC Week 2018

Amsterdam (NL)5

Surface-Vacuum parameters for beam-induced effects

Tuesday morning talks on EuroCirCol

FCC Week 2018

Amsterdam (NL)6

CryoPlants efficiency

Thursday afternoon 13:30 talks on CryoPlant efficiency

FCC Week 2018

Amsterdam (NL)7

Beam transfer devices

Inductive adder prototype being developed for FCC. PCBs and magnetic core of the prototype inductive adder

GOAL: Invent new generation of septum, kickers & powering

compatible with high intensities and energies for FCCWednesday morning 08:30 talks on Beam transfer devices

FCC Week 2018

Amsterdam (NL)8

GOAL: Foresee the impact of new manufacturing methods and

material…

Manufacturing technologies

Tuesday morning & Thursday afternoon talks on Manufacturing technologies

FCC Week 2018

Amsterdam (NL)9

Normal conducting magnets

Wednesday afternoon talks on other magnets for FCC

FCC Week 2018

Amsterdam (NL)10

Cryomagnet insulation vacuum

GOAL: Breakthrough technical solutions for Helium Leaks

mitigations in the cryogenic insulation vacuumTuesday morning 10:30 Strategies for efficient He trapping.

FCC Week 2018

Amsterdam (NL)11

Radiation hardness assurance

FCC Week 2018

Amsterdam (NL)12

Robotics

GOAL: Inspection and manipulation solutions to improve the FCC

operability, availability, maintainability and personnel safety

Remote inspection for

reconnaissance and RP

measurements

Telemanipulation: screwing,

unscrewing, cutting, grasping

etc.

R&D in machine and deep

learning, virtual reality, user

friendly human robots interfaces

and haptic devices

Procedures and best practice

for installation, dismantling and

maintenance in highly activated

areas Thursday afternoon 13:30 Robotics

FCC Week 2018

Amsterdam (NL)13

Architecture for magnets & machine protection

FCC Week 2018

Amsterdam (NL)14

Beam dumps

GOAL: Ensure that the beam dump(s) can digest the full beam

power reviewing failure scenario…Thursday morning 08:30 Beam dump(s)

FCC Week 2018

Amsterdam (NL)15

WP1

WP9

WP4

WP10

WP13

WP3

WP3

WP7

WP11

WP2

WP4

WP14

WP12

FCC Week 2018

Amsterdam (NL)16

FCC-hh beam vacuum concept: BS design,

tests and feasibility. [Francis Perez, ALBA]

Results on the FCC-hh Beam Screen

prototype at the KIT electron storage ring.

[Luis Antonio Gonzalez Gomez, INFN]

FCC-ee beam vacuum concept: the bean pipe

of FCC-ee. [Roberto Kersevan, CERN]

Beam Screen surface characterisation for

high energy beams: test results at Frascati.

[Roberto Cimino, INFN]

HTS YBaCuO Coated Conductors for the

FCC-hh beam screens. [Joffre Gutierrez,

ICMAB-CSIC]

HTS Tl-based coatings for the FCC-hh beam

screens. [Alessandro Leveratto, CNR SPIN]

NEG Coatings and laser surface engineering

(LASE) electron cloud mitigation techniques.

[Oleg Malychev, STFC]

Shape memory alloys for remote connection

of beam pipes in radioactive areas. [Cédric

Garion, CERN]

Strategies for efficient He trapping. [Sara

Stelitano, University of Calabria]

WP1

WP9

WP4

WP10

WP13

FCC Week 2018

Amsterdam (NL)17

Superconducting Shield (SuShi) septum -

towards a full prototype. [Dani BARNA, Wigner

Institute]

High field normal conducting massless septa

for FCC beam transfer. [Alejandro Sanz Ull,

CERN]

Superconducting truncated cosine-theta

septum. [Kei SUGITA, GSI]

Marx prototype pulse generator design and

initial results. [Mike BARNES, CERN]

FCC kicker magnet design, impedance and

heating aspects. [Mike BARNES, CERN]

Laser triggering of thyristor swiches.

[Nicolas Magnin, CERN]

Inductive adder prototype pulse generator

for FCC-hh kickers. [David Woog, CERN]

Development of experimental and theoretical

investigations in NRC “Kurchatov Institute” of

fast particle irradiation effects on radiation

resistance of new collimator and

superconductor materials for magnet oriented

on the Future Circular Collider (FCC).

[Alexander Ryazanov, NRC “Kurchatov

institute”]

WP3

WP3

FCC Week 2018

Amsterdam (NL)18

Improved Concept of HE-LHC Beam Dump.

[Armen APYAN, North-western University]

FCC-hh beam dump extraction and dilution

kicker systems. [Mike BARNES, CERN]

Dilution requirements for the FCC-hh dump.

[Anton Lechner, CERN]

Radiation environment assessment in the

FCC-hh and FCC-ee machines. [Angelo

Infantino, CERN)]

Overview of the radiation hardness

assurance studies for FCC. [Ruben Garcia

Alia, CERN]

Overview of the dose response in CMOS

technology. [Giulio Borghello, CERN]

Dosimetry for ultra-high particle fluence and

challenges for irradiation experiments at

FCC radiation levels. [Georgi Gorine, CERN]

R&D on new concepts for beam

instrumentation. [Federico Roncarolo, CERN]

WP7

WP11

FCC Week 2018

Amsterdam (NL)19

Cold plasma spray additive manufacturing.

[Cédric Garion, CERN]

Additive manufacturing in-situ repair

solutions for the FCC. [Toms Torims, Riga

Technical University]

Robotics inspections, maintenance and

early intervention for the FCC. [Mario di

Castro, CERN]

New cryoplant concepts compatible with

mixed gasses. [François Millet, CEA]

Circuit layout and protection for FCC-hh.

[Marco Prioli, CERN]

Quench detection System for the FCC era.

[Tomasz Podzorny, CERN]

Proposal on a novel energy extraction system

for superconducting magnet chains. [Vasilios

Karaventzas, CERN]

Beam Impact & Machine Protection

challenges. [Yuancun NIE, CERN]

FCC Powering concepts. [Francisco Blanquez,

CERN]

WP2

WP4

WP14

WP12

FCC Week 2018

Amsterdam (NL)20

Numerical and experimental studies of the magnetic shielding performance of an MgB2 tube for the superconducting

shield septum project. [Martin NOVÁK (Wigner)]

RF performance of high temperature superconducting coated conductor (HTS-CC) as beam screen for FCC-hh.

[Patrick Krkotic (ALBA CELLS)]

EP System Design and Development Progress at IHEP. [Song Jin (IHEP, CAS)]

Study on Fabrication of 650MHz 5cell Waveguide HOM SRF Cavities. [Song Jin (IHEP, CAS)]

New LASE surfaces obtained with various lasers and their parameters for e-cloud mitigation. [Sian Taaj (STFC)]

A facility for studying SEY from LASE surfaces at cryogenic temperatures. [Sian Taaj (STFC)]

Photon tracing and gas-density profiles in the FCC-hh. [Ignasi Bellafont (ALBA CELLS)]

Development and characterisation of diagnostical components located in vacuum vessel under thermal fatigue cycles.

[Judit SZALAI (Budapest University of Technology and Economics)]

Vacuum Properties of Single Metal Zirconium Non-Evaporable Getter Coating. [Ruta Sirvinskaite (Loughborough

University)]

A Facility for Studying ESD from NEG Coated Surfaces at Cryogenic Temperatures. [Oleg Malyshev (STFC)]

Recent development in Laser ablation surface engineering for reduction of secondary electron yield. [Reza Valizadeh

(ASTeC/STFC)]

Non-Contact Human Detection and Vital Parameter Acquisition Based on Physiological Signals of Human Body in

Harsh Environments. [Arturs Ivanovs (Riga Technical University)]

Minimum effective thickness for activation and low total electron yield of TiZrV non-evaporable getter coatings. [Theo

Sinkovits (CERN)]

HTS coatings for the FCC-hh collider beam screen. [Artur Romanov, Joffre Gutierrez (ICMAB)]

FCC-hh beam vacuum concept: test results at BINP. [Alexander Krasnov (BINP)]

NEG coating: associated problems and solutions. [Oleg Malyshev (STFC)]

Machine protection requirements and architecture. [Jan Uythoven / Yuancun Nie (CERN)]

Study of Vacuum stability and desorption processes at low temperature for various FCC-hh candidate materials.

[Luisa Spallino (LNF - INFN)]

Study of Reflectivity and Photo Yield on FCC-hh proposed beam screen surfaces. [Eliana La Francesca (LNF - INFN)]

Desorption, scrubbing and surface modifications during Synchrotron Radiation light irradiation of accelerator

walls. [M. Angelucci (LNF - INFN)

FCC Week 2018

Amsterdam (NL)21

Closing remarks

• Successful with all announced milestones…

• All contributions to CDR have been provided to Editor.

• Apart from Collimation, no major showstopper has been identified…

• Expecting FCC to integrate several Technology breakthroughs!

• Not too late ! for once, Technologies allow conceptual dreams.

9th April 2018FCC Week 2018

Amsterdam (NL)22

Dream the next generation of Accelerator Components… take off!

We’re Special! Join us in Technologies! …

Thanks to all contributors…