GE Energy

X$D Ultra®

841 IECIE3 Premium EfficientExtra Severe Duty Motors90-280 Frame0.55-220 kW50 Hz or 60 Hz200 V-690 V

GE sets the standard…We are dedicated to the future.Since Edison’s time at the leading edge of discovery, GE’s mission has

remained steadfast: to not only meet the world’s changing needs, but to

anticipate them.

GE imagines and builds innovative solutions that help customers meet

environmental challenges and improve their operating performance,

while also benefiting the company and the world. As a global leader in

energy, technology, manufacturing and infrastructure, GE is uniquely

suited to help solve environmental dilemmas—today and for generations to come.

X$D Ultra® 841 IEC meets these challenges.Improved Customer Operating Performance

• The X$D Ultra® 841 IEC builds on the X$D (Extra Severe Duty) legacy of reliable motors designed to save you

money and meets or exceeds the intent of the IEEE 841-2009 Standard. It is designed and rated for Zone 2 and

Division 2 hazardous applications with a T3 (200°C) temperature code. With an advanced insulation and bearing

system, a test report of each motor to ensure performance, five-year warranty and all the advanced features

that come with it, the X$D Ultra® 841 IEC is one of the most durable and reliable motor you can buy.

Improved Customer Environmental Performance

• Replacing one 75 kW 1800 RPM Pre-EPAct/Eff3 motor (rewound once) with GE’s X$D Ultra® 841 IEC motor for

one year would save enough energy to power two US households for the same period.

• If a US Industrial user replaced one 75 kW 1800 RPM Pre-EPAct/Eff3 motor with an X$D Ultra® 841 IEC,

greenhouse gas emissions could be reduced by as much as 15 metric tons per year.

X$D Ultra® 841 IEC motors comply with the US Energy Independence & Security Act which requires general purpose motors to meet efficiency levels based on NEMA MG1 table 12-12 by December 19, 2010.

EISAct2007

EISAct2007

…with powerful features.

Superior PerformanceThe X$D Ultra® 841 IEC meets or exceeds IE3/NEMA Premium® nominal efficiencies and exceeds all IEC/NEMA Premium® minimum guaranteed efficiencies. Each motor comes with its own test report including a 5 point vibration test demonstrating performance compliance with the IEEE 841-2009 specification, but with IEC construction and designs.

• Overall vibration is 1.4 mm/sec peak (0.055 inches per second) vs 0.08 inches (0.06 for 8 pole) per second per IEEE 841. This helps to extend the life of the motor and the connected equipment.

• Total shaft runout is 0.025 mm (0.001”) for shaft diameters up to 41 mm and 0.038 mm (0.0015”) for shaft diameters greater than 41 mm for ball bearing machines.

• GEGARD2400TM insulation systems feature Class H insulation materials. This system increases motor protection against IGBT drive voltage spikes up to 2,400 volts @ 0.1 microsecond rise time, which exceeds NEMA MG1-31 standards.

BearingsGE’s Six Star Bearing SystemTM assures the maximum possible bearing life when combined with a maintenance program. For optimum performance the same over-sized bearing is used on both ends of the motor.

• A steel reinforced recessed slinger is integrated to both the drive end and opposite drive end, ensuring IP55 protection of the bearing system per IEEE 841-2009 specification.

• Fully charged lubrication system with a temperature-resistant polyurea grease suitable for a wide temperature range (-40° to +130°C).

• An oversized single-shielded bearing is open towards the grease cavity for maximum lubricant circulation.

• 130,000 hours minimum bearing life for direct-drive loads, and 26,280 hours for L10 belt-driven loads.

• Low temperature rise designs for increased bearing life. Designs are 15% cooler on average than the class B 80°C temperature rise required by the IEEE 841-2009 specification.

• A gasketed cast-iron inner bearing cap retains lubricant and protects the bearing system and interior of the motor from contaminants.

• Finned endshield for improved heat dissipation and long bearing life (200-280 frame).

IE3/Efficiency

Proven ReliabilityFor years severe duty motors from GE have proven their performance and reliability in the most demanding process industry environments.

• A five-year warranty comes standard with every X$D Ultra® 841 IEC motor. (60 months operational/66 months maximum from shipment).

• Cast-in vibration pads provide five-point vibration probe mounting (four radial, one axial).

• In an internal test, an X$D Ultra® 841 motor continued to operate after being subjected to 1,000,000 plug reversals.

• Rugged cast iron frame, conduit box, endshields and fan cover.

• Foot flatness tolerance of 0.127 mm (0.005 inches) provides easy alignment to connected equipment and further accentuates the benefit of 1.4 mm/sec peak (0.055 inches per second) vibration.

• Draft angle on top of all mounting feet is 1.50° or less to ensure secure mounting is achieved.

Inverter Duty ApplicationThe GEGARD2400TM insulation system exceeds both the

IEEE 841-2009 and NEMA MG1-31 specifications and

the requirements of the IEC 60034-17 and 60034-18-41

standards. It has the ability to withstand repeated 0.1

microsecond rise time that typically can reach 2400 volt

spikes for up to 575 line voltages. All motors are tested

to verify the Corona Inception Voltage (CIV) at the factory

before shipment.

• Infinite:1 variable torque speed range and 20:1 constant torque* speed range is stamped on the nameplate.

* Some exceptions apply to constant torque speed ranges. Contact GE to verify capability on secific ratings.

ServiceabilityEven the best motors need service. Our design engineers have made improvements to help make service easy.

• An oversized gasketed conduit box, containing permanently labeled non-wicking Class H leads to a terminal board, makes connection and installation easy.

• Dual mounting holes for application versatlity and reduced inventory.

• Stator core centered in frame for easy conversion of the conduit box and lead entry from one side of the frame the the other (except on some FF flange constructions).

• Raised letter embossed 316 stainless steel nameplate with superior operational and maintenance information.

EXCEEDS NEMAMG1-31

INVERTERDUTY

GEGARD1800 TM

EXCEEDS NEMAMG1-31

INVERTERDUTY

GEGARD2400 TM

EXCEEDS NEMAMG1-31

INVERTERDUTY

GEGARD2800 TM

EXCEEDS NEMAMG1-31

INVERTERDUTY

GEGARD2800 TM

Superior Corrosion ProtectionThe motor frame, fan cover, endshield and conduit box are cast iron for severe duty. Rotor surfaces are coated to resist interior rust, which helps maintain performance.

• Epoxy ester paint system meets IEEE 841-2009 specification paint requirements and stands up to corrosive environments.

• Non-sparking corrosion resistant, bidirectional fan* is quiet and energy efficient.

* 2 pole are unidirectional (280 K & H frames).

• Stainless steel combination breather/drains allow condensation to drain from motor.

• Corrosion resistant ISO Grade 8.8 metric hardware is rugged and designed for ease of motor service.

• Embossed 316 stainless steel nameplate stamped with over 30 motor specification details and all applicable standards.

• Leads are sleeved and are compatible with an oil mist lubrication system.

SafetyGE has added features which help make this product safe to install, operate and maintain.

• Safer lifting is possible with a four-point lifting system versus a single eyebolt.

• Cast-in lifting lugs eliminate eyebolts that may strip, shear, get lost, or be improperly selected.

• Grease inlet fitting at 12 o’clock and outlet fitting at 8 o’clock position, which promotes safer regreasing.

• A silicon bronze box lug earthing terminal is located in the conduit box. Additional earthing terminal posts are located toward the drive end on both sides of the frame for greater operational safety.

• Fan covers on frames 200-280 have axial mounting bolts for more rugged installation.

• For Zone 2/Division 2 applications: All GE X$D Ultra® 841 IEC motors are available with third party certification for IEC Ex nA Zone 2, ATEX Zone 2, and Division 2 hazardous applications with a T3 (200°C) temperature code. As an option, GE Motors can also offer a Class I Division 2, cULus listed auxiliary nameplate.*

* Motors to be used on ASD (Adjustable Speed Drives) in Division 2 areas need to be reviewed. For this and more nameplate information please contact GE Motors.

X$D IEC 50 Hz (IE3/NEMA Premium® Effi ciency- Type KFS)Typical Performance Data at 400 Volts

Output kW Frame FL RPM Cat

NumberNP Amps

IN (A)

Start/Full Load Amps

IS/IN

Start/Full Load Torque

TS/TN

Full Load Torque TN (Nm)

Starting Torque TS (Nm)

Breakdown Torque

Tmax (Nm)

NP Eff. Full

Load

Guar. Eff. Full

Load

75% Load Eff.

50% Load Eff.

NP PF Full

Load

Max KVAR

Moment of Inertia J (Kgm2)

Appro Motor

Mass (kgs)

Sound Pressure

dB(A)

IEC T Block (@460 V) 6 Stud IEC

0.55 90S 2930 N402 1.3 7.8 2.8 1.8 5.0 6.5 80.7 77.8 82.3 79.0 78.5 0.4 0.0013 23 70 M40.55 90S 1435 N401 1.2 6.7 3.0 3.7 11.0 13.2 82.9 80.3 85.2 84.0 79.0 0.4 0.0032 23 58 M40.55 90S 945 N400 1.5 5.0 2.5 5.6 14.0 17.2 79.1 76.0 81.1 79.5 68.0 0.6 0.0043 23 55 M40.55 90L 700 N472 2.3 3.7 2.8 7.5 20.6 24.9 67.0 62.1 66.6 60.8 50.5 1.1 0.0048 23 60 M40.75 90S 2910 N405 1.7 7.0 2.4 2.5 6.0 7.7 84.0 81.6 85.5 84.5 77.5 0.5 0.0013 23 70 M40.75 90S 1425 N404 1.6 6.4 2.8 5.0 13.8 16.4 84.0 81.6 86.6 86.4 83.0 0.4 0.0045 23 58 M40.75 90S 940 N403 2.0 5.2 2.7 7.6 20.3 24.5 80.6 77.7 81.7 80.3 68.0 0.7 0.0052 23 55 M40.75 112S 725 N473 2.7 4.6 2.0 9.9 19.5 29.8 75.0 71.3 76.3 71.9 53.5 1.2 0.0128 46 62 M61.1 90S 2920 N495 2.4 8.9 3.3 3.6 11.8 14.1 83.8 81.4 89.0 88.4 80.5 0.6 0.0020 23 70 M41.1 90L 1425 N407 2.2 6.7 3.0 7.4 22.1 25.5 85.3 83.1 87.1 87.1 83.0 0.6 0.0052 23 58 M41.1 112S 970 N406 2.7 7.2 2.3 10.8 24.5 42.4 85.5 83.3 87.5 86.1 68.5 1.0 0.0151 46 62 M61.1 112M 715 N474 3.5 4.4 1.9 14.7 27.3 38.8 77.6 74.2 77.6 74.6 58.0 1.5 0.0146 46 62 M61.5 90L 2915 N412 3.2 8.0 3.1 4.9 15.5 18.0 85.0 82.8 86.6 85.3 78.5 0.9 0.0020 23 70 M41.5 90L 1435 N410 3.4 7.5 3.9 10.0 38.8 43.0 85.8 83.7 86.4 85.4 75.0 1.2 0.0101 23 64 M41.5 112S 1465 N496 3.3 6.8 2.5 9.8 24.0 32.8 87.5 85.6 89.1 87.8 74.5 1.1 0.0050 46 58 M61.5 112M 965 N409 3.8 6.9 2.4 14.8 35.1 57.6 85.5 83.3 86.1 84.5 67.5 1.4 0.0132 46 62 M61.5 132S 725 N475 4.8 5.1 2.1 19.8 42.4 66.3 79.6 76.5 80.4 77.1 56.5 2.2 0.0238 100 63 M62.2 112S 2945 N415 4.5 7.5 2.0 7.1 14.2 23.7 86.4 84.4 90.3 89.2 82.0 1.0 0.0068 46 75 M62.2 112S 1465 N414 4.7 6.8 2.4 14.3 35.0 46.2 87.5 85.6 90.1 89.4 77.0 1.4 0.0132 46 64 M62.2 112M 965 N497 5.3 7.1 2.4 21.8 51.9 83.9 85.4 83.2 86.6 85.5 70.0 2.0 0.0180 46 62 M62.2 132M 725 N476 6.7 5.5 2.3 29.0 67.8 103.3 83.5 81.0 83.2 80.5 56.5 3.0 0.0366 100 63 M63 112S 2935 N418 5.9 6.9 1.9 9.8 18.2 29.8 88.5 86.8 90.6 90.0 83.0 1.3 0.0073 46 75 M63 112S 1460 N417 6.6 6.7 2.5 19.6 48.5 62.4 88.4 86.7 89.4 88.5 74.5 2.1 0.0142 46 64 M63 132S 975 N416 6.9 6.0 1.8 29.4 54.1 76.9 87.5 85.6 89.2 88.7 71.5 2.2 0.0358 100 65 M63 160M 735 N477 8.1 5.7 2.2 39.0 85.4 129.7 85.5 83.3 87.0 84.8 62.5 3.4 0.0668 130 63 M6

3.7 112M 2930 N421 7.2 6.7 1.8 12.1 22.2 35.7 88.2 86.4 91.0 90.8 84.5 1.5 0.0083 46 75 M63.7 112M 1455 N420 7.6 6.7 2.4 24.2 57.6 72.9 89.2 87.6 90.5 90.3 79.0 2.1 0.0180 46 64 M63.7 132M 970 N419 8.6 6.0 1.9 36.3 69.4 96.4 87.7 85.9 89.1 88.7 71.0 2.8 0.0397 100 65 M63.7 160M 730 N478 8.9 5.2 1.8 48.3 85.1 132.2 86.5 84.5 89.0 88.0 69.0 3.2 0.0891 130 63 M64 112M 2925 N424 7.8 6.6 1.8 13.1 23.9 38.2 88.5 86.8 90.9 90.8 83.5 1.7 0.0083 46 75 M64 112M 1455 N423 8.2 6.5 2.4 26.2 61.8 77.8 89.2 87.6 90.3 90.2 78.5 2.3 0.0180 46 64 M64 132M 975 N422 10.0 6.2 2.2 39.2 88.1 119.3 87.7 85.9 88.1 87.0 66.0 3.8 0.0397 100 65 M64 160M 730 N479 9.4 4.9 1.6 52.4 85.1 132.2 86.5 84.5 88.8 88.2 71.0 3.2 0.0891 130 63 M6

5.5 132S 2930 N428 9.9 7.0 2.3 17.9 41.5 49.6 89.4 87.8 91.4 91.4 89.5 1.8 0.0171 100 77 M65.5 132S 1470 N427 11.0 6.6 2.0 35.8 70.2 99.5 90.0 88.5 91.5 91.2 80.5 2.8 0.0378 100 67 M65.5 132M 960 N425 12.3 5.6 1.9 54.6 101.4 139.9 86.1 84.0 88.3 88.6 75.0 3.7 0.0645 100 65 M65.5 160M 975 N426 11.8 5.8 2.0 54.0 108.0 149.0 88.7 87.0 89.5 88.8 76.0 3.8 0.0434 130 65 M65.5 160L 735 N480 15.2 5.8 2.5 71.7 180.9 259.9 86.5 84.5 87.1 84.8 60.5 6.7 0.0980 130 63 M65.5 180M 740 N481 12.8 7.0 2.2 71.2 156.0 238.9 86.5 84.5 90.2 89.3 71.5 4.4 0.2193 200 68 M67.5 132S 2945 N431 13.2 8.5 3.1 24.3 75.7 79.3 90.3 88.8 92.9 92.8 90.5 2.3 0.0240 100 77 M67.5 132M 1470 N430 15.0 7.0 2.1 48.8 103.6 142.8 90.8 89.4 91.8 91.6 79.5 4.1 0.0472 100 67 M67.5 160M 975 N429 15.7 6.1 2.2 73.6 162.7 213.5 89.7 88.2 90.8 90.4 77.0 4.9 0.0875 130 65 M67.5 180L 735 N482 16.8 6.9 2.1 97.1 202.3 306.3 87.8 86.0 91.2 90.7 73.5 5.2 0.3237 200 68 M611 160M 2960 N434 20.1 7.3 2.5 35.5 89.5 101.1 91.2 89.9 92.7 92.5 86.5 4.1 0.0485 130 79 M611 160M 1475 N433 20.3 6.7 2.5 71.2 178.0 205.7 91.7 90.5 93.5 93.5 85.5 4.6 0.1189 130 69 M611 160L 975 N432 23.2 7.0 2.7 107.6 290.4 360.1 90.8 89.4 91.7 91.1 75.5 7.6 0.1335 130 65 M611 180L 735 N483 24.4 6.8 2.2 142.9 317.4 459.1 88.5 86.8 90.5 90.2 73.5 7.8 0.3237 200 68 M611 200M 730 N484 26.0 4.6 1.7 144.0 240.1 327.5 88.5 86.8 91.8 91.3 69.0 8.6 0.4133 365 71 M815 160M 2965 N437 26.6 8.7 3.4 48.3 165.4 155.8 91.9 90.7 93.9 93.7 88.5 4.9 0.0685 130 79 M615 160L 1480 N498 29.1 7.9 3.2 96.7 309.7 345.5 92.3 91.1 93.7 93.1 80.5 8.5 0.1417 130 69 M615 180L 980 N435 29.4 8.1 2.8 145.7 411.6 489.2 91.6 90.3 92.5 92.2 80.5 8.7 0.3330 200 69 M615 200L 730 N485 38.0 5.3 2.2 195.6 439.8 574.3 90.4 89.0 91.2 89.9 63.0 15.1 0.5032 365 71 M8

18.5 160L 2965 N440 32.3 9.1 3.8 59.6 226.2 194.0 92.4 91.3 94.3 94.3 89.5 5.4 0.0828 130 79 M618.5 180M 1480 N439 34.9 7.0 1.9 119.3 232.3 342.1 92.7 91.6 93.9 93.6 82.5 9.2 0.2222 200 72 M618.5 200L 985 N438 41.7 6.7 2.1 179.1 370.0 597.8 92.1 90.9 92.6 91.4 69.5 15.6 0.4458 365 72 M818.5 225S 740 N486 39.7 4.6 1.4 238.9 323.9 528.5 92.1 90.9 93.8 93.3 73.0 12.3 0.9486 524 71 M822 180M 2970 N443 39.2 9.7 4.2 70.7 299.8 287.6 92.7 91.6 94.2 93.5 87.5 9.2 0.1414 200 80 M622 180L 1480 N442 40.4 7.9 2.9 141.9 408.8 423.0 93.1 92.1 93.9 93.8 84.5 9.9 0.2370 200 72 M622 200L 985 N441 47.0 6.7 2.0 213.1 422.7 670.3 92.5 91.4 93.4 92.6 73.0 15.8 0.5201 365 72 M822 225M 740 N487 46.7 4.6 1.4 284.1 385.4 624.9 92.5 91.4 94.2 93.8 73.5 14.0 1.1066 524 71 M830 200M 2970 N446 54.9 5.8 1.7 96.4 160.7 240.3 93.3 92.3 94.6 93.9 84.5 12.3 0.1930 365 82 M830 200M 1480 N445 56.8 5.5 1.8 193.3 340.9 485.1 93.6 92.6 95.0 94.8 81.5 14.5 0.4166 365 75 M830 225M 990 N444 58.1 5.5 1.5 289.9 449.3 740.7 93.1 92.1 94.7 94.5 80.0 15.7 1.1439 524 72 M830 250M 735 N488 62.0 5.0 1.5 390.2 591.5 1007.5 92.5 91.4 94.1 93.9 75.5 18.7 1.6053 721 72 M837 200M 2970 N449 67.1 6.1 1.9 118.9 226.0 307.9 93.7 92.8 95.1 94.5 85.0 14.8 0.2252 365 82 M837 200L 1485 N448 72.4 6.4 2.1 238.0 503.7 712.6 94.0 93.1 95.2 94.7 78.5 21.8 0.4999 365 75 M837 250M 995 N447 72.3 6.1 1.6 355.5 586.4 965.8 93.5 92.5 95.3 94.7 79.0 20.5 1.5037 721 74 M1037 250M 735 N489 79.1 5.8 1.9 479.6 912.0 1510.3 93.1 92.1 94.3 93.7 72.5 27.2 2.0066 721 72 M1045 225S 2975 N452 79.9 6.4 1.8 144.5 256.2 389.0 94.0 93.1 95.7 95.2 86.5 16.6 0.3570 524 82 M845 225S 1485 N451 85.0 6.9 2.0 289.0 586.7 894.4 94.3 93.4 95.5 95.1 81.0 23.8 0.7100 524 76 M845 280S 995 N450 98.1 6.5 1.6 432.0 695.8 1411.0 93.9 93.0 93.7 92.3 70.5 36.4 2.5723 998 77 M1045 280S 740 N490 92.0 5.5 1.5 579.1 894.1 1546.8 93.5 92.5 94.6 94.0 75.5 28.0 2.9188 998 74 M1055 225M 2975 N455 96.8 6.7 1.9 176.6 330.7 487.8 94.3 93.4 95.9 95.5 87.0 19.9 0.4080 524 82 M1055 225M 1485 N454 101.0 6.7 2.0 353.4 698.0 1036.0 94.5 93.7 95.3 94.9 83.0 26.2 0.8209 524 76 M1055 280M 995 N453 111.0 6.4 1.5 528.3 808.5 1587.4 94.2 93.3 94.6 93.6 76.0 35.8 3.0010 998 77 M1055 280M 740 N491 111.0 5.7 1.7 707.7 1170.0 1956.9 93.9 93.0 95.1 94.4 76.0 33.4 3.7527 998 74 M10 75 250M 2975 N458 127.0 8.4 2.4 240.5 572.8 813.2 94.8 94.0 96.2 96.0 90.0 23.2 0.6996 721 82 M1075 250M 1490 N457 136.0 5.8 1.7 480.8 836.3 1261.2 95.0 94.3 96.5 96.3 83.5 32.7 1.5089 721 77 M1075 280M 995 N456 144.0 6.1 1.4 721.2 1027.0 1949.8 94.7 93.9 95.1 94.6 79.5 40.4 3.6441 998 77 M1075 280M 740 N492 150.0 5.9 1.7 965.3 1685.2 2725.3 94.6 93.8 95.4 94.8 76.5 44.6 5.0037 998 74 M1090 280M 2980 N460 154.0 6.6 1.5 288.1 426.8 816.6 95.0 94.3 95.6 95.1 89.0 28.2 1.0916 998 82 M1690 280S 1490 N459 160.0 6.8 1.3 575.9 745.8 1665.8 95.2 94.5 96.4 96.2 85.5 36.0 3.0566 998 80 M1690 280K 995 N469 166.0 6.7 1.7 864.6 1481.3 2739.8 95 94.3 95.8 95.5 82.5 42.3 5.3918 1430 80 M1690 280K 740 N493 183.0 6.5 2.0 1157.5 2364.8 3751.6 94.9 94.1 95.2 94.6 75 58.4 6.1503 1430 74 M16

110 280M 2985 N462 186.0 7.7 1.8 351.8 634.8 1123.2 95.3 94.6 96.1 95.6 89.5 34.0 1.3986 998 82 M16110 280M 1490 N461 190.0 6.3 1.2 704.3 857.3 1845.8 95.5 94.8 96.2 96.0 87.5 37.2 3.5039 998 80 M16110 280H 995 N470 204.0 7.0 1.8 1056.7 1904.1 3477.0 95.3 94.6 95.9 95.6 81.5 54 6.2214 1430 80 M16110 280H 745 N494 222.0 6.8 2.2 1413.8 3102.2 4829.4 95.3 94.6 95.5 95 75 71.4 8.6521 1430 74 M16132 280K 2980 N463 218.0 6.9 1.6 422.5 680.6 1309.5 95.6 94.9 96.2 95.9 91.5 31.2 1.6500 1430 88 M16132 280K 1490 N465 232.0 6.3 1.3 844.5 1090.4 2377.4 95.6 94.9 96.7 96.6 86.0 49.5 3.8946 1430 77 M16132 280H 995 N471 240.0 6.9 1.8 1268.4 2274.8 4055.5 95.5 94.8 96.1 95.9 83 59.3 7.6730 1430 80 M16160 280H 2985 N464 262.0 7.7 1.9 511.9 947.1 1708.6 95.7 95.3 96.5 96.3 92.0 37.4 2.0460 1430 88 M16160 280H 1495 N465 278.0 7.0 1.5 1023.2 1503.8 3091.2 95.9 95.5 97.0 96.8 86.5 58.7 5.0485 1430 77 M16200 280H 1495 N467 348.0 7.2 1.5 1278.7 1958.2 3916.4 96.0 95.6 96.7 96.3 86.5 75.1 5.7698 1430 89 M16220 280H 1490 N468 380.0 6.6 1.4 1407.5 1958.2 3916.4 96.0 95.6 96.7 96.4 87.0 75.1 5.7698 1430 89 M16

Contact GE for details on additional ratings

X$D IEC 50 Hz (IE3/NEMA Premium® Efficiency – Type KFS)Typical Performance Data at 400 Volts

690 V Ratings are also available - Contact GE for details

X$D IEC 60 Hz (IE3/NEMA Premium® Efficiency – Type KFS)Typical Performance Data at 460 Volts

Contact GE for details on additional ratings

Output kW Frame FL RPM Cat

NumberNP Amps

IN (A)

Start/Full Load Amps

IS/IN

Start/Full Load Torque

TS/TN

Full Load Torque TN (Nm)

Starting Torque TS (Nm)

Breakdown Torque

Tmax (Nm)

NP Eff. Full

Load

Guar. Eff. Full

Load

75% Load Eff.

50% Load Eff.

NP PF Full

Load

Max KVAR

Moment of Inertia J (Kgm2)

Approx Motor

Mass (kgs)

Sound Pressure

dB(A)

IEC T Block (@460 V) 6 Stud IEC

0.55 90S 3520 N502 1.1 7.6 2.2 1.5 3.3 4.7 77.0 73.6 86.4 84.8 82.0 0.3 0.0013 23 75 M40.55 90S 1745 N501 1.1 7.8 3.3 3.0 10.0 12.5 82.5 79.9 85.5 83.4 77.0 0.4 0.0031 23 63 M40.55 90S 1145 N500 1.3 5.2 2.4 4.6 10.8 14.2 80.0 77.0 80.6 78.4 67.5 0.6 0.0036 23 60 M40.55 90L 840 N575 1.6 3.6 1.9 6.3 11.7 15.3 72.0 67.8 73.6 70.4 59.0 0.8 0.0048 23 60 M40.75 90S 3515 N505 1.3 7.9 2.3 2.0 4.6 6.5 82.5 79.9 88.3 87.4 85.0 0.3 0.0017 23 75 M40.75 90S 1740 N504 1.4 8.1 3.5 4.1 14.2 17.5 85.5 83.3 86.9 85.3 78.5 0.5 0.0039 23 63 M40.75 90S 1155 N503 1.8 6.1 3.1 6.2 19.1 24.3 82.5 79.9 83.0 80.5 63.0 0.8 0.0051 23 60 M40.75 112S 875 N576 2.4 4.9 1.9 8.2 15.3 26.2 75.5 71.8 78.6 74.4 52.0 1.2 0.0128 46 65 M61.1 90S 3520 N508 1.9 8.4 2.7 3.0 8.1 10.6 84.0 81.6 85.6 83.3 85.0 0.5 0.0019 23 75 M41.1 90L 1735 N507 2.0 7.8 3.3 6.0 19.9 24.0 86.5 84.5 87.2 86.2 80.0 0.7 0.0045 23 63 M41.1 112S 1170 N506 2.3 7.3 1.9 9.0 17.4 34.2 87.5 85.6 88.6 87.1 69.5 0.9 0.0174 46 65 M61.1 112M 870 N577 3.3 5.0 2.0 12.0 24.0 37.0 78.5 75.3 79.8 76.1 53.5 1.7 0.0146 46 65 M61.5 90L 3515 N512 2.7 8.5 2.8 4.1 11.5 14.8 85.5 83.3 86.5 84.7 83.0 0.7 0.0019 23 75 M41.5 90L 1730 N511 2.7 7.8 3.4 8.3 27.9 32.7 86.5 84.5 87.9 87.2 81.0 0.9 0.0051 23 63 M41.5 112M 1170 N509 3.0 7.3 2.0 12.3 24.7 46.1 88.5 86.8 88.6 87.4 71.0 1.2 0.0174 46 65 M61.5 132S 880 N578 3.9 5.4 1.7 16.3 27.5 52.5 84.0 81.6 85.9 83.3 57.0 1.9 0.0366 100 68 M62.2 90L 3475 N563 3.8 7.0 2.4 6.0 14.3 18.1 85.0 82.8 86.2 85.7 84.0 1.0 0.0004 23 80 M62.2 112S 3540 N515 4.0 7.7 2.1 5.9 11.9 20.5 86.5 84.5 91.2 90.4 79.5 1.2 0.0021 46 75 M42.2 112S 1765 N514 4.0 7.5 2.7 11.9 31.9 41.2 89.5 87.9 90.7 89.7 77.0 1.4 0.0123 46 67 M62.2 112M 1165 N513 4.5 7.4 2.2 18.0 39.8 69.2 88.0 86.2 88.4 87.3 70.5 1.8 0.0282 46 68 M62.2 132S 1180 N564 4.3 7.1 2.1 17.8 36.6 57.3 89.5 87.9 89.5 88.2 72.0 1.7 0.0181 100 65 M62.2 132M 875 N579 5.6 5.6 1.9 23.9 44.7 75.7 85.5 83.3 86.4 84.2 58.0 2.7 0.0420 100 68 M63 112S 3540 N518 5.1 7.5 2.0 8.1 16.1 26.4 88.5 86.8 90.4 89.1 83.5 1.3 0.0073 46 80 M63 112S 1765 N517 5.8 7.4 2.8 16.2 44.9 57.2 89.5 87.9 89.7 88.3 72.5 2.3 0.0132 46 67 M63 132M 1175 N516 5.6 6.7 1.9 24.4 46.1 69.8 89.6 88.0 90.1 89.4 75.0 2.0 0.0340 100 68 M63 160M 880 N580 6.4 5.0 1.5 32.6 50.2 84.6 85.5 83.3 87.7 86.3 69.0 2.6 0.0579 130 67 M6

3.7 112M 3540 N521 6.2 7.6 2.1 10.0 20.5 32.8 88.5 86.8 91.1 90.0 84.0 1.5 0.0083 46 80 M63.7 112M 1760 N520 6.7 7.0 2.5 20.1 50.4 63.3 89.5 87.9 90.5 89.8 77.0 2.2 0.0151 46 67 M63.7 132M 1175 N519 7.1 7.3 2.2 30.0 65.8 95.3 89.5 87.9 90.6 89.7 73.0 2.7 0.0397 100 68 M63.7 160M 880 N581 7.8 5.4 1.7 40.0 66.2 111.7 86.5 84.5 89.7 88.4 68.5 3.2 0.0891 130 67 M64 112M 3535 N524 6.8 7.5 2.0 10.8 22.0 35.2 88.5 86.8 91.2 90.2 83.5 1.7 0.0084 46 82 M64 112M 1760 N523 6.9 7.1 2.5 21.7 54.1 66.9 90.5 89.1 91.7 91.0 80.0 2.0 0.0181 46 67 M64 132M 1180 N522 7.7 7.6 2.4 32.4 76.9 109.4 90.5 89.1 90.8 89.8 72.0 3.1 0.0434 100 68 M64 160M 880 N582 8.2 5.1 1.5 43.4 66.2 111.7 86.5 84.5 89.7 88.7 70.5 3.2 0.0891 130 67 M6

5.5 132S 3535 N528 8.6 7.2 2.1 14.9 31.2 41.9 89.5 87.9 91.1 90.4 89.5 1.8 0.0160 100 82 M65.5 132S 1775 N527 9.5 7.8 2.4 29.6 70.5 96.5 91.7 90.5 92.0 91.0 79.5 3.1 0.0378 100 70 M65.5 132M 1175 N525 11.0 7.1 2.4 44.7 108.1 149.1 89.4 87.8 89.6 88.5 69.0 4.7 0.0434 100 68 M65.5 160M 1175 N526 9.5 6.8 2.3 44.6 99.0 131.3 91.0 89.7 91.7 91.0 79.5 3.1 0.0877 130 68 M65.5 160L 880 N583 11.6 5.5 1.8 59.6 105.5 166.1 86.5 84.5 90.2 89.2 69.0 4.6 0.1069 130 67 M67.5 132M 3530 N531 11.5 7.4 2.3 20.3 46.5 56.1 90.2 88.7 92.0 91.8 91.0 2.0 0.0206 100 82 M67.5 132M 1770 N530 13.0 7.4 2.3 40.5 91.1 123.0 91.7 90.5 92.1 91.4 79.0 4.2 0.0416 100 70 M67.5 160M 1175 N529 13.4 7.3 2.6 60.9 158.1 197.5 91.0 89.7 91.2 90.3 77.0 4.9 0.0875 130 68 M67.5 180M 885 N584 14.5 7.1 2.0 80.7 163.0 254.1 88.5 86.8 91.3 90.6 73.5 5.3 0.2715 200 71 M611 160M 3555 N534 17.0 6.8 2.0 29.5 60.2 73.9 91.0 89.7 92.5 92.1 89.5 2.9 0.0485 130 82 M611 160M 1770 N533 17.3 6.4 2.2 59.3 132.2 152.8 92.4 91.3 93.3 93.1 86.5 4.1 0.1006 130 72 M611 160L 1175 N532 19.4 7.9 3.0 89.2 267.6 244.0 91.7 90.5 92.3 91.6 77.5 7.0 0.1335 130 68 M611 180L 885 N585 20.7 6.6 1.9 118.7 222.9 338.4 88.5 86.8 91.2 91.0 75.5 6.8 0.3237 200 71 M615 160M 3560 N537 23.0 7.8 2.6 40.2 106.4 111.9 91.0 89.7 93.4 93.2 90.0 3.9 0.0628 130 82 M615 160L 1775 N536 23.4 7.1 2.6 80.7 212.9 271.1 93.0 92.0 94.1 94.0 86.5 5.5 0.1417 130 72 M615 180L 1185 N535 27.0 6.0 1.7 121.0 203.4 329.9 91.7 90.5 92.3 91.7 76.0 9.7 0.2793 200 72 M615 200M 875 N587 30.0 4.7 1.6 163.4 258.9 358.7 90.2 88.7 92.1 91.6 69.5 11.1 0.4133 365 74 M8

18.5 160L 3555 N540 27.7 7.9 2.9 49.7 145.9 132.6 91.7 90.5 93.9 93.9 91.5 3.8 0.0828 130 82 M618.5 180M 1780 N539 29.0 6.6 1.9 99.2 184.4 267.4 93.6 92.6 94.3 94.0 85.5 7.5 0.2222 200 75 M618.5 200L 1180 N538 32.0 5.5 1.9 149.8 280.4 352.8 93.0 92.0 93.5 93.0 78.0 9.8 0.4830 365 75 M818.5 200L 880 N588 38.7 5.2 2.0 200.9 392.2 524.8 90.2 88.7 91.9 90.9 66.5 16.1 0.5032 365 74 M822 180M 3560 N543 32.7 8.0 3.3 59.0 194.3 257.6 91.7 90.5 93.9 93.3 92.0 5.6 0.1219 200 82 M622 180L 1780 N542 34.9 7.2 2.0 118.0 238.9 329.3 93.6 92.6 94.4 94.1 84.5 9.5 0.2370 200 75 M622 200L 1180 N541 37.3 5.6 2.0 178.3 354.0 414.7 93 92.0 93.8 93.5 79.5 10.9 0.5573 365 75 M622 225S 890 N589 41.2 4.7 1.4 236.2 329.3 525.2 91.7 90.5 94.2 93.6 73.0 14.4 0.9169 524 74 M830 200M 3570 N546 47.6 5.9 1.6 80.2 125.8 203.5 94.1 93.2 93.9 92.8 84.0 12.7 0.1769 365 82 M830 200M 1780 N545 49.7 5.4 1.7 160.9 274.1 395.2 94.1 93.2 94.7 94.2 80.5 15.2 0.3333 365 78 M830 225M 1185 N544 48.8 5.3 1.4 241.3 346.7 558.3 94.1 93.2 94.8 94.5 82.0 13.2 1.0459 524 75 M830 225M 890 N590 55.9 4.7 1.4 322.2 455.9 708.6 91.7 90.5 94.4 93.9 73.5 19.0 1.1699 524 74 M837 200M 3565 N549 58.1 5.4 1.5 99.1 144.5 221.4 93.0 92.0 94.3 93.6 86.0 12.8 0.1930 365 82 M837 200L 1780 N548 60.3 5.9 1.9 198.2 379.5 509.0 94.5 93.7 95.2 94.8 81.5 17.6 0.4443 365 78 M837 250M 1195 N547 64.5 6.1 1.6 296.0 477.1 811.2 94.1 93.2 94.6 93.6 76.5 22.9 1.1926 721 77 M1037 250M 885 N591 67.9 5.5 1.7 399.0 668.1 1128.9 92.4 91.3 94.3 93.7 74.0 24.9 1.6053 721 75 M1045 225S 3570 N552 70.6 6.0 1.5 120.3 174.9 302.1 93.6 92.6 95.0 94.1 85.5 17.5 0.2933 524 82 M845 225S 1785 N551 70.8 6.0 1.7 240.9 404.7 244.0 95.0 94.3 95.3 95.1 84.0 18.9 0.6212 524 79 M845 280S 1195 N550 72.9 6.5 1.4 359.8 514.3 995.0 94.5 93.7 94.5 93.4 82.0 21.2 3.1082 998 80 M1045 250M 885 N592 82.0 5.6 1.7 485.4 839.2 1388.8 92.4 91.3 94.6 94.1 74.5 29.5 2.0066 721 75 M1055 225M 3575 N555 85.3 6.7 1.8 146.9 261.9 400.5 93.6 92.6 95.5 94.7 86.5 20.8 0.3570 524 82 M1055 225M 1785 N554 84.6 6.1 1.8 294.5 531.2 748.8 95.4 94.7 95.7 95.6 85.5 20.8 0.8431 524 79 M1055 280M 1195 N553 91.3 6.4 1.5 439.8 640.6 1245.0 94.5 93.7 94.6 93.6 80.0 29.6 2.8939 998 80 M1055 280S 890 N593 93.4 5.3 1.4 589.4 833.2 1380.4 93.6 92.6 95.3 94.8 79.0 27.0 3.7527 998 77 M1075 250M 3570 N558 110.0 6.9 1.8 200.5 368.4 548.8 94.1 93.2 95.9 95.6 91.0 17.5 0.6996 721 82 M1075 250M 1785 N557 117.0 5.0 1.5 400.8 597.2 912.1 95.4 94.7 96.2 95.9 84.0 29.9 1.1580 721 80 M1075 280M 1190 N556 118.0 5.9 1.3 600.4 805.2 1472.3 95.0 94.3 95.3 94.7 84.0 30.3 3.8585 998 80 M1075 280M 890 N594 127.0 5.2 1.4 804.5 1147.8 1858.1 93.6 92.6 95.4 95.1 79.5 36.1 4.1697 998 77 M1090 280M 3580 N560 134.0 6.4 1.3 239.9 322.4 656.5 95.0 94.3 95.7 95.2 88.5 28.4 0.9551 998 82 M1690 280S 1785 N559 139.0 6.4 1.9 481.1 915.7 1363.5 95.4 94.7 95.8 95.3 85.0 37.2 2.3111 998 82 M1690 280K 1195 N571 143.0 6.6 1.7 719.9 1211.0 2198.1 95.0 94.3 95.6 95.0 83.0 40.7 4.6660 1430 80 M1690 280K 890 N595 153.0 5.8 1.7 964.5 1649.3 2608.1 94.5 93.7 95.4 94.9 78.0 48.0 5.0037 1430 74 M16

110 280M 3580 N562 162.0 6.5 1.5 293.2 429.3 795.5 95.0 94.3 96.1 95.7 89.5 31.0 1.1257 998 82 M16110 280M 1790 N561 164.0 6.0 1.2 586.5 684.3 1478.0 95.8 95.2 96.4 96.1 88.0 35.2 3.2057 998 82 M16110 280K 1195 N572 173.0 7.2 1.9 879.4 1662.7 2870.4 95.8 95.2 95.9 95.4 83.5 48.4 6.8435 1430 80 M16110 280H 890 N596 184.0 6.0 1.8 1178.5 2100.5 3231.8 95.0 94.3 95.7 95.3 79.0 56.3 7.2970 1430 74 M16132 280K 3585 N565 192.0 7.5 1.7 351.5 600.3 1177.1 95.4 94.7 95.6 94.9 90.5 36.7 1.4520 1430 88 M16132 280K 1790 N567 200.0 6.9 1.4 702.9 988.6 2109.1 96.2 95.6 96.4 96.2 86.0 50.8 3.6061 1430 77 M16132 280H 1195 N573 207.0 7.0 1.8 1055.7 1944.5 3337.3 95.8 95.2 96.0 95.6 83.5 57.2 7.0509 1430 80 M16132 280H 890 N597 221.0 6.3 1.9 1413.9 2673.4 4051.8 95.4 94.7 95.8 95.4 78.5 69.9 8.5479 1430 74 M16160 280H 3580 N566 229.0 7.2 1.8 426.3 777.0 1324.0 95.4 94.9 96.0 95.5 92.0 34.8 1.9140 1430 88 M16160 280H 1795 N568 239.0 7.1 1.5 852.0 1259.5 2557.6 96.2 95.8 96.8 96.6 87.5 56.1 4.4716 1430 77 M16160 280H 1195 N574 250.0 7.0 1.9 1279.8 2387.5 4006.9 95.8 95.4 96.1 95.8 84.0 66.2 8.7099 1430 80 M16200 280H 1795 N569 298.0 7.2 1.5 1064.6 1633.3 3229.3 96.2 95.8 96.4 95.7 87.5 68.9 5.6255 1430 89 M16220 280H 1795 N570 330.0 7.3 1.6 1171.1 1815.5 3589.8 96.2 95.8 96.4 95.8 87.0 78.7 5.7698 1430 89 M16

X$D IEC 60 Hz (IE3/NEMA Premium® Effi ciency- Type KFS)Typical Performance Data at 460 Volts

Contact GE for details on additional ratings

GE Energy

Fort Wayne, IN 46802

800 541 7191

www.gemotors.com

For more information, please contact your GE sales representative.

GE, X$D Ultra®, GEGARD2400TM and Six Star Bearing SystemTM are trademarks and a service mark of General Electric Company.

NEMA Premium® is a trademark of NEMA.

©2011, General Electric Company. All rights reserved.

GEA18014A (03/2011)

Complete Product Offering

Innovative Technology

Proven Experience

World-Class Service

The GE Advantage

Complete Product Offering

Innovative Technology

Proven Experience

World-Class Service

The GE Advantage

With GE, you have a single

point of responsibility for

all your motor needs. GE

offers a complete portfolio

of equipment from which to

choose, including:

• Motors from 1 to 100,000 HP

(0.75 to 75,000 kW)

• Generators up to 75 MVA

• Low and medium voltage

variable frequency drives

• Multiple product lines

covering all enclosures: WPI,

WPII TEFC, TEAAC, TEWAC

• GE motors can adhere to

these industry standards

among others: NEMA, IEC,

CSA, API 541, 546, 547, and

661; IEEE 841, GOST, DIV 2,

Ex-n for Zone 2, Ex-p for

Zone 1 or 2, ATEX

GE has over 125 years of

experience in the electrical

industry with successful

global installations spanning

a wide variety of applications.

Very few competitors can

claim the depth and breadth

of experience that GE has

in creating and executing

solutions for its customers.

With GE’s wealth of global

experience comes a full

coverage offering for its

products along with leading

experts in the industries

they serve. Additionally,

GE experience and

innovation brings:

• Experienced sales force

• Engineering support

optimized for your

application

• Project management tools

GE is constantly innovating

product technologies to

meet and exceed customer

expectations. Founded by

world renowned inventors,

General Electric continues to

be a company made up of

individuals striving to design,

create, and build products

and solutions that improve

people’s lives. Among the

many tools used to produce

innovative products are:

• Electromagnetic finite

element analysis

• 3D solid modeling

• Virtual motor “building”

while in design phase