Paredes exteriores aisladas Tabiquería interior Estructura ... house english.pdf · 2 •...
Transcript of Paredes exteriores aisladas Tabiquería interior Estructura ... house english.pdf · 2 •...
Modelo 105
El precio incluye :
Anteproyecto
Paredes exteriores aisladas
Tabiquería interior
Estructura del techo
Ventanas
Modelo 124
El precio incluye :
Anteproyecto
Paredes exteriores aisladas
Tabiquería interior
Estructura del techo
Ventanas
Modelo 150
El precio incluye :
Anteproyecto
Paredes exteriores aisladas
Tabiquería interior
Estructura del techo
Ventanas
Modelo 117
El precio incluye:
Anteproyecto
Paredes exteriores aisladas
Tabiquería interior
Estructura del techo
Ventanas
Modelo 160
El precio incluye:
Anteproyecto
Paredes exteriores aisladas
Tabiquería interior
Estructura del techo
Ventanas
Modelo 168
El precio incluye:
Anteproyecto
Paredes exteriores aisladas
Tabiquería interior
Estructura del techo
Ventanas
1
GENERAL CHARACTERISTICS
SUPPLY
The supply and assembly of the components of the house is intended A LO TOSCO INNOVADOR with
ROOF FRAME
ENERGY CLASSIFICATION
Almost passive building with energy class A + or higher
ACOUSTIC CLASSIFICATION
Class 1
STRUCTURAL CLASSIFICATION
Building with class 1 seismic resistance
WALLS
Structure of the external supporting walls of the frame, finished with wood fiber coating with a thermal
coefficient equal to U = 0.135W / m2
ROOF WITH VIEWED BEAMS
The exposed beam ceiling provided has a thermal coefficient equal to: U = 0.18 W / m2
SOLID AND / OR LAMINATED WOOD STRUCTURE
The solid and / or laminated wood structures meet the requirements mentioned in point A of chapter 11.1
of the NTC 2018 (CE Specifications of structural elements).
WINDOWS
All the windows and doors of the terrace have triple glazing with a double chamber and have S-class
profiles (as required by the mandatory EN 12608 standard in Italy). Furthermore, they have a particularly
high radiation resistance value (12 GJ / m2), a value much higher than the limit established by the
standard.
WARRANTY
The guarantee of the structures is ten years. Thanks to an agreement with the ITAS insurance group, it is
possible to extend it to thirty years.
THE SUPPLY AND ASSEMBLY OF THE EXTERNAL WALLS INCLUDES:
• External cladding with 40 mm WOODEN FIBER PANEL COATING for plastering the exterior part
• 12 mm OSB BOARD
• Thermal ventilation chamber
• 30 x 45 mm wooden counter slats
• Riwega USB WALL 85 Breathable 0.5mm Waterproof Case
2
• Structure in wooden studs C24 45 × 195 mm, h 2500mm, 2600mm, 2700mm
• 200mm total thermal insulation
• 0.2mm steam brake
• 45 x 45 mm strip, EXCLUDED ASSEMBLY
• 50 mm mineral wool thermal insulation inserted in 45 x 45 mm slats (chamber of electrical and hydraulic
installations), EXCLUDED MOUNTING
• 12mm OSB BOARD, EXCLUDED MOUNT
SUPPLY OF INTERNAL WALLS
THE SUPPLY AND ASSEMBLY OF THE INTERNAL WALLS INCLUDES:
Structure of the walls with 45 mm thick and variable width wooden studs (95/145/195 mm)
SUPPLY OF ONLY THE MATERIAL WITHOUT ASSEMBLY:
100 MM THERMAL INSULATION
3
SUPPLY AND ASSEMBLY OF THE Loft
(ONLY FOR TWO-FLOOR HOUSE)
THE SUPPLY AND ASSEMBLY OF THE Loft (ONLY FOR TWO-FLOOR HOUSES) INCLUDES:
• OSB (technical wood) panel 18 mm thick
• 240mm wooden beam at variable wheelbase according to static calculations
TO COMPLETE THE Loft AFTER INSERTING THE FACILITIES THEY WILL BE SUPPLIED BUT THEY WILL NOT
ASSEMBLE THE FOLLOWING MATERIALS:
• Thermal insulation in mineral wool of a total of 200 mm (2 layers of 100 mm),
• 30 x 45 mm wooden counter battens (chamber for electrical and hydraulic installations),
SUPPLY OF THE ROOF FRAME
THE SUPPLY FOR THE WORK OF THE STRUCTURE FOR THE CONSTRUCTION OF THE ROOF INCLUDES:
4
• Supporting beam with frame beams, according to structural calculations
• 25 X 100 mm slats
• 18mm Osb board deck
• Waterproof and breathable 0.5 Riwega DO 135 cover
• 25 X 50 mm battens, fixed longitudinally on the joists underneath, with continuous sealing gasket Riwega
Usb Tip Kont
• From 1 to 9 - included in the price
• From 10 to 15 - NOT included in the price
ALL SOLID AND / OR LAMINATED WOOD STRUCTURES MEET THE REQUIREMENTS MENTIONED IN POINT A)
OF CHAPTER 11.1 OF THE 2018 NTC (EC SPECIFICATIONS OF STRUCTURAL ELEMENTS).
SUPPLY AND ASSEMBLY OF ALL WINDOWS AND WINDOW DOORS
THE SUPPLY OF SALES AND TERRACE DOORS HAS THE FOLLOWING CHARACTERISTICS:
• White PVC or a choice from our catalog
• Triple glass and double chamber
• Class S profiles
• Radiation resistance coefficient equal to 12 GJ / m2
• Thermal coefficients Uw value = up to 0.50 W / (m2K) / Uf value = 0.95 W / (m²K)
WINDOW DOORS HIGHER THAN 210 HAVE A HIGHER PRICE -
sliding doors / sliding windows are not included in the price
• Brügmann bluEvolution: 82
5
LIST OF TECHNICAL FEATURES AND SERVICES INCLUDED IN THE SUPPLY
OUR TECHNICAL STUDY OFFERS TOGETHER WITH THE SUPPLY THE FOLLOWING SERVICES:
• Drafting of structural execution designs.
• Static test of the structures that includes:
- control of the structural reports of the project
- control of certified testing of materials
- technical test relationship
LIST OF EXCLUDED TECHNICAL FEATURES AND SERVICES
IT IS EXCLUDED FROM THE SUPPLY AND THEREFORE AT THE CUSTOMER'S CHARGE THE FOLLOWING:
• Crane
• Foundation plate
• Scaffolding and portable ladders
• Window sandwich panels and perimeter walls before cutting
• Where it is not possible to get to the construction site with the trailer, the client is in charge of
transportation from the closest unloading location accessible to the construction site.
• Accommodation for the assembly team during the entire assembly phase.
• Removal of waste from the site.
6
• Anything not explicitly specified in the sections listed in this order proposal.