7/30/2019 Catalogo de Material Deportivo 3
1/40
7/30/2019 Catalogo de Material Deportivo 3
2/40www.gillathletics.com [email protected]
Sand Trap Systems & Covers ............2-4
Take-Off Boards...................................5-6
Circles & Toeboards .........................7-10
Discus & Hammer & Shot Cages 11-19
Vault Boxes .......................................20-21
Steeplechase .....................................22-23
Infield Installations ..........................24-25Track Curbing
VersaCom Boxes
Football/Combination Goals ........26-30
FootBall/Soccer ValuePacks .................31
Soccer Goals & Accessories .........32-35
Field Hockey/Lacrosse Goals/Seating ......................................................36
Ball Stops .................................................37
TABLE OF CONTENTS
Why Specify Gill...
Market Position
Gill Athletics
is the worlds largest manufacturer of outdoor construction-relatedathletic equipment. Most coaches will select a Gill product if given a choice. Since1918 we have been designing and building products that make the staging of athleticevents safer, more accurate and more expeditious.
PrecisionGill construction products are built to exacting standards. We go to painstakinglengths to make products to the precise specifications of the NFHS, NCAA andIAAF. Gill Athletics currently has more IAAF certified products than any othermanufacturer.
InnovationMany Gill products are unique. Other manufacturers cannot supply them becausethey are exclusive. One example of this would be the Skydex Soft Vault Box. This
one of a kind product represents a quantum leap forward in pole vault safety.
ReputationThe name Gill is synonymous with service. When we say a product is warranted for10 years, we mean it. We have been proving our commitment of service to custom-ers for almost 90 years. Service is the central value upon which our reputation hasbeen built.
ConvenienceOur products are made with consideration for those who will specify, install and usethem. This catalog, our Facility Planning CD and the gillathletics.com website all existsolely to make our products the easiest and most convenient for design, construc-tion and maintenance professionals to use.
Specify the best in 2011..Specify Gill!
601 Mercury DriveChampaign, IL 61822
TRACK& FIELD FACILITYFIXTURES CD &
ONLINE SUPPORT INFORMATION
Perfect for planning of outdoor multi-use athletic facilities. The Gill Athletics Facility
Fixtures CD is available upon request. This is the complete technical reference for
sports facility architects, track designers, contractors and developers. Complete with
detailed CAD drawings and installation guidelines. Drawings also available online at
www.gillathletics.com/facility.
Contact us at: [email protected]
WELCOMEWELCOMEPRICES PUBLISHED IN THIS
CATALOG EFFECTIVE
OCTOBER 1, 2010 THROUGH
SEPTEMBER 30, 2011
INDEX
Gill Athletics and Porter Athletic are trademarks
of Gill Athletics, Inc.
A Litania Sports Group Company
7/30/2019 Catalogo de Material Deportivo 3
3/40Toll Free: (800) 637-3090Phone: (217) 367-8438 Fax: (217) 367-8440 1
NCAA DIVISION I
Arkansas State UniversityBaylor UniversityCollege of William and MaryColorado State UniversityDrake University (IAAF Facility)East Carolina UniversityEastern Illinois UniversityEastern Kentucky UniversityFlorida Atlantic UniversityHigh Point UniversityJohns Hopkins UniversityIllinois State UniversityIowa State UniversityMiddle Tennessee State UniversityMississippi State UniversityNorthern Illinois UniversitySouth Dakota StateTexas State UniversityUniversity of ColoradoUniversity of HawaiiUniversity of IllinoisUniversity of IowaUniversity of KansasUniversity of LouisvilleUniversity of NebraskaUniversity of Northern ColoradoUniversity of Northern IowaUniversity of Oregon (IAAF Facility)University of South Florida
University of TulsaWake Forest UniversityWashington State UniversityWestern Carolina UniversityWestern Illinois University
NCAA DIVISION II
Bellarmine UniversityCal State-StanislausColorado School of MinesColorado State University-PuebloFayetteville State UniversityGrand Valley State UniversityMesa State CollegeMSU-MankatoNorthwestern CollegeOklahoma Baptist University
Southern Illinois-EdwardsvilleSt. Martins UniversityWestern Oregon University
NCAA DIVISION III
Anderson UniversityBenedictine UniversityBethany CollegeCarroll CollegeCarthage CollegeCentral College
Christopher Newport UniversityFranklin CollegeGeorge Fox UniversityGreenville CollegeGrinnell CollegeHardin Simmons UniversityIllinois Wesleyan UniversityJuniata CollegeKnox CollegeLake Forest CollegeLinfield CollegeMacalester College (MN)-indoorMarietta CollegeMessiah CollegeNorth Central CollegePacific UniversitySt. Olaf CollegeTrine UniversityUniversity of WI-Parkside
University of Dubuque (IA)University of St. ThomasUniversity of Wisconsin-La CrosseWheaton College (IL)
NAIA
Adrian CollegeAshford UniversityAzusa Pacific UniversityConcordia CollegeDickinson State UniversityFresno Pacific UniversityMarian UniversityOlivet Nazarene UniversitySoka UniversitySouth Western CollegeSterling College
COMMUNITY COLLEGE
Barton County CCCowley County CCGlendale CCIowa Western CCLane CCLas Positas CollegeMonterey Peninsula CollegeRend Lake CollegeSan Mateo City CollegeSanta Barbara City CollegeSanta Monica City CollegeSouthwest Mississippi CCSouthwestern Oregon CC
OTHER FACILITIES
South Lake Tahoe, Olympic Trials FacilityWest Seattle StadiumWinona Community Track
HIGH SCHOOL
Ayala HS (Chino Hills, CA)Barrington HS (IL)Carlsbad HS (CA)Chino Hills HS (CA)Chino HS (CA)Davis Sr HS (CA)Delphi HS (IN)Don Lugo HS (Chino, CA)King Kamehameha Schools (HI)Madison Sr HS (LA)Mahomet-Seymour HS (IL)Montgomery Academy (AL)Mira Mesa HS (San Diego, CA)North Central HS (Indianapolis, IN)Raymore-Peculiar MS (MO)San Diego HS (CA)St. Marks School of Texas (Dallas, TX)St. George Ind. School (TN)Staley HS (KS)Summit High School (Bend, OR)Terra Nova HS (CA)Union County HS (KY)
TRACK& FIELD FACILITIESFEATURING GILL EQUIPMENT
University of Oregon
Eugene, Oregon
Santa Barbara City College
Santa Barbara, California
7/30/2019 Catalogo de Material Deportivo 3
4/40www.gillathletics.com [email protected]
SAND TRAP SYSTEMSSAND TRAP SYSTEMS
LJ/TJ SAND PIT FORM
GENERAL DESCRIPTION:
This prefabricated LJ/TJ Sandpit Form is designed to facilitate easy
set up and convenient concrete pour. Save time and money with
this product and take the guess work out of onsite fabrication. This
form is made of specially folded 1/8 aluminum to maximize integrity
and rigidity. This item meets NFHS, NCAA, and IAAF specifications.
The F400 form is designed for NCAA and IAAF dimensions of
29 x 99. The F400M form is designed for NCAA and IAAF
dimensions of 26 x 99. The F400HS form is designed for NFHS
dimensions of 23 x 99.
MATERIAL SPECIFICATIONS:
5052 Aluminum (Ultimate 28ksi, Yield 13ksi)
CONSULTATION:
Sand pit forms should be installed with some form of drainage system.The absence of a drainage system can result in oversaturation of thesand and consequently an unsafe landing surface. It is recommendedthat a facility have at least two LJ/TJ landing pits. Runways should beplaced in close proximity and parallel to each other. IAAF specifiesthat fill sand should consist of washed river sand or pure quartz sand,without organic components, maximum 2mm granules, of which notmore than 5%in weight is less than 0.2mm.
PRICING:
F400 LJ/TJ Sand Pit Form
(Inside Dimensions: 29 x 99) . . . . . . . . . . . . . . . . . $4,872.00
F400M LJ/TJ Sand Pit Form
(Inside Dimensions: 26 x 99) . . . . . . . . . . . . . . . . . $4,665.00
F400HS LJ/TJ Sand Pit Form; High School
(Inside Dimensions: 23 x 99) . . . . . . . . . . . . . . . . . $4,179.00
LJ/TJ SAND PIT FORMW/LEDGEFOR COVER
GENERAL DESCRIPTION:
Similar to the F400 series, the F420 Sandpit Form with Ledge
includes prefabricated ledges designed to hold the Gill Aluminum
Sand Pit Cover. Save time and money with this product and take the
guess work out of onsite fabrication. This form is made of specially
folded 1/8 aluminum to maximize integrity and rigidity. This item
meets NFHS, NCAA, and IAAF specifications.
Designed to accommodate the 730148 Gill Aluminum pit cover.
The F420 form is designed for NCAA and IAAF dimensions of
29 x 99. The F420M form is designed for NCAA and IAAF
dimensions of 26 x 99. The F420HS form is designed for NFHS
dimensions of 23 x 99.
MATERIAL SPECIFICATIONS:5052 Aluminum (Ultimate 28ksi, Yield 13ksi)
CONSULTATION:
Sand pit forms should be installed with some form of drainage system.
The absence of a drainage system can result in oversaturation of the
sand and consequently an unsafe landing surface. It is recommended
that a facility have at least two LJ/TJ landing pits. Runways should be
placed in close proximity and parallel to each other. IAAF specifies
that fill sand should consist of washed river sand or pure quartz sand,
without organic components, maximum 2mm granules, of which not
more than 5%in weight is less than 0.2mm.
PRICING:
F420 LJ/TJ Sand Pit Form w/Ledge
(Inside Dimensions: 29 x 99) . . . . . . . . . . . . . . . . . $5,360.00
F420M LJ/TJ Sand Pit Form w/Ledge
(Inside Dimensions: 26 x 99) . . . . . . . . . . . . . . . . . $5,157.00
F420HS LJ/TJ Sand Pit Form w/Ledge; High School
(Inside Dimensions: 23 x 99) . . . . . . . . . . . . . . . . . $4,660.00
F400F40
M
7/30/2019 Catalogo de Material Deportivo 3
5/40Toll Free: (800) 637-3090Phone: (217) 367-8438 Fax: (217) 367-8440 3
F440
LJ/TJ SAND PIT FORMW/SAND CATCHER
GENERAL DESCRIPTION:
This LJ/TJ Sandpit Form with Sand Catcher is the deluxe version of
LJ/TJ sand pits. Featuring all the specifications of the F400 and F420
series, this prefabricated sandpit form comes complete with a sand
catcher system that allows sand to be conveniently stored when the
pit is covered and quickly returned to the pit for competition. This
item meets NFHS, NCAA, and IAAF specifications.
Designed to accommodate the 730148 Gill Aluminum Pit Cover.
The F440 form is designed for NCAA and IAAF dimensions of
2973/8 x 99. The F440M form is designed for NCAA and IAAF
dimensions of 2673/8 x 99. The F440HS form is designed for
NFHS dimensions of 2373/8 x 99.
MATERIAL SPECIFICATIONS:
5052 Aluminum (Ultimate 28ksi, Yield 13ksi)
PRICING:
F440 LJ/TJ Sand Pit Form w/Ledge and Sand Trap
(Inside Dimensions: 2973/8 x 99) . . . . . . . . . . . . . $15,215.00
F440M LJ/TJ Sand Pit Form w/Ledge and Sand Trap
(Inside Dimensions: 2673/8x 99) . . . . . . . . . . . . . $14,057.00
F440HS LJ/TJ Sand Pit Form w/Ledge and Sand Trap; High School
(Inside Dimensions: 2373/8 x 99) . . . . . . . . . . . . . $12,306.00
LJ/TJ SAND TRAP COVER SYSTEM
GENERAL DESCRIPTION:
For pre-installed LJ/TJ sand pits, the LJ/TJ Sand Trap Cover System
can be utilized for sand storage and removal. This product is
fabricated from galvanized steel bar grating with a perforated rubberoverlay. Each unit measures 18 x 36 x 15/8 and lifts easily for
sand removal. The sand trap covers require a ledge around the
perimeter of the sand trap trench to rest on. The installer may have
to make one or more field cuts to ensure the covers properly fit the
customers sand trap trench.
MATERIAL SPECIFICATIONS:
Steel Grate 1 x 18 x 36 Hot Dipped Galvanized
PRICING:
730149 LJ/TJ Sand Trap Cover System
(18 x 36 x 15/8) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$160.00
LJ/TJ DOUBLE ENTRYSAND PIT FORM
GENERAL DESCRIPTION:
This Double Entry Sand Pit Form allows for two LJ/TJ runways to
utilize the same sand pit. Save space, time and money. This item
meets NFHS, NCAA, and IAAF specifications.
Designed to accommodate the 730148 Gill Aluminum Pit Cover.
The F440DE form is designed for NCAA and IAAF dimensions of
2973/8 x 99. The F440MDE form is designed for NCAA and IAAF
dimensions of 2673/8 x 99. The F440HSDE form is designed for
NFHS dimensions of 2373/8 x 99.
MATERIAL SPECIFICATIONS:
5052 Aluminum (Ultimate 28ksi, Yield 13ksi)
PRICING:
F440DE LJ/TJ Double Entry Sand Pit Form
(Inside Dimensions: 2973/8 x 99) . . . . . . . . . . . . . $14,736.00
F440MDE LJ/TJ Double Entry Sand Pit Form(Inside Dimensions: 2673/8 x 99) . . . . . . . . . . . . . $13,607.00
F440HSDE LJ/TJ Double Entry Sand Pit Form; High School
(Inside Dimensions: 2373/8 x 99) . . . . . . . . . . . . . $12,729.00
730149
7/30/2019 Catalogo de Material Deportivo 3
6/40www.gillathletics.com [email protected]
730148
LJ/TJ SAND PIT COVER
GENERAL DESCRIPTION:
This LJ/TJ Sand Pit Cover is fabricated from extruded aluminum
seat plank. The ideal cosmetic cover for your LJ/TJ sand pits.Three planks per panel are securely welded together in a frame
of 23/8 x 1 x 3/16 aluminum angle. Each panel comes with four
retractable handles for easy installation and removal. A 2 wide
supporting recess is required on each side wall for the panels. This
recess is not required on the end walls. Manufacturing begins upon
receipt of form 730148-2 (field check guide). A typical sand pit
requires 10-11 cover panels.
MATERIAL SPECIFICATIONS:
6063-T6 Aluminum (Ultimate 35ksi, Yield 31ksi)
CONSULTATION:
When not using a Gill pre-fabricated sand pit form, it is important toinclude a 2 ledge along the sides of the sand pit to accommodate
the 730148 sand pit cover.
PRICING:
730148 LJ/TJ Sand Pit Cover . . . . . . . . . . . . . . . . . . . . . . . . .$27.25/sq ft
PORTABLE SAND PITW/CATCHER
GENERAL DESCRIPTION:
This Portable Sand Pit with Catcher is a portable above ground
sand pit designed for use with a raised runway (not included). Theassembled inside dimensions of the F450 are 2311 x 98. Modular
units bolt together to create a sand pit and come apart for storage.
Excellent addition to any indoor facility needing a temporary LJ/TJ
Sand Pit.
MATERIAL SPECIFICATIONS:
5052 Aluminum (Ultimate 28ksi, Yield 13ksi)
PRICING:
F450 Portable Sand Pit w/Catcher (not shown) . . . . . . . . $11,056.00
SAND CATCHER TUBS
GENERAL DESCRIPTION:
Use the sand catcher tubs inside your sand trap system for easy
storage and replacement of LJ/TJ pit sand before, during and after
each use.
PRICING:
F44001 Sand Catcher Tubs (11 x 17 x 8) . . . . . . . . .$139.00/set of 6
SAND TRAP SYSTEMSSAND TRAP SYSTEMS
730149
7/30/2019 Catalogo de Material Deportivo 3
7/40Toll Free: (800) 637-3090Phone: (217) 367-8438 Fax: (217) 367-8440 5
NCAA ADJUSTABLE TAKE-OFF
BOARD SYSTEM
GENERAL DESCRIPTION:
This Adjustable Take-Off Board System consists of an aluminum tray
assembly, a steel leveling board, and separate replaceable take-offand foul boards. The steel leveling board makes this one of a kind
product faster and easier to adjust horizontally and vertically with
the turn of a wrench. The tray is fabricated from an aluminum sheet
and angle which is securely welded together. The tray is designed to
be incorporated into runways and holds the take-off and foul boards
flush with the runway surface.
The leveling board is fitted with six adjustable feet and two lateral
constraint adjustments to eliminate any motion in the tray and
ensure a flush fit for the take-off and foul boards. Wood take-off
and foul boards are fabricated from MDO plywood, sealed and
painted with outdoor enamel coating. Synthetic take-off boards are
polyurethane with a plywood backing. This product meets NFHS and
NCAA specifications. Powder coating available for an additional 10%.
Replacement parts available.
MATERIAL SPECIFICATIONS:
Base Board . . . . . . . . . . . . . A513 Steel (Ultimate 55.1ksi, Yield 29.7ksi)
Tray . . . . . . . . . . . . . . 3003-H14 Aluminum (Ultimate 22ksi, Yield 21ksi)
CONSULTATION:
When it comes to take-off boards (and runways), more is better. The
long jump and triple jump events tend to be real bottlenecks in the
schedule of a track meet. Thirty jumpers on one runway means that
each jumper will have over half an hour between jumps. This is not
conducive to performance and is certainly not fan friendly.
NCAA rule allows for two take-off boards per gender for the triple
jump and one board per gender in the long jump. Board placement
must be not less than 1m or greater than 3m from the landing pit
for the long jump and at least 11m for men and 8.5m for women for
the triple jump. NCAA rule also mandates that there be a minimum
runway length of 40m from the nearest edge of the take-off board.
PRICING:
4350 NCAA Take-Off System-Wood . . . . . . . . . . . . . . . . . . .$873.00
4350S NCAA Take-Off System-Synthetic . . . . . . . . . . . . . . . $1,013.00
IAAF ADJUSTABLE TAKE-OFF
BOARD SYSTEM
GENERAL DESCRIPTION:
This Adjustable Take-Off Board System consists of an aluminum tray
assembly, a steel leveling board, and separate replaceable take-offand foul boards. The steel leveling board makes this one of a kind
product faster and easier to adjust horizontally and vertically with
the turn of a wrench. The tray is fabricated from an aluminum sheet
and angle which is securely welded together. The tray is designed to
be incorporated into runways and holds the take off and foul boards
flush with the runway surface.
The leveling board is fitted with six adjustable feet and two lateral
constraint adjustments to eliminate any motion in the tray and
ensure a flush fit for the take-off and foul boards. Take-off and foul
boards are fabricated from MDO plywood, sealed and painted with
outdoor enamel coating. Synthetic take-off boards are polyurethane
with a plywood backing. This product meets NFHS, NCAA, and
IAAF specifications. IAAF certified. Powder coating available for an
additional 10%. Replacement parts available.
MATERIAL SPECIFICATIONS:
Base Board . . . . . . . . . . . . . A513 Steel (Ultimate 55.1ksi, Yield 29.7ksi)
Tray . . . . . . . . . . . . . . 3003-H14 Aluminum (Ultimate 22ksi, Yield 21ksi)
PRICING:
43501 IAAF Take-Off System-Wood . . . . . . . . . . . . . . . . . . . .$899.00
4350
TAKE-OFF BOARDS
4350
TAKE-OFF BOARDS
7/30/2019 Catalogo de Material Deportivo 3
8/40www.gillathletics.com [email protected]
441T
HIGH SCHOOL TAKE-OFF BOARD SYSTEM
GENERAL DESCRIPTION:
Designed to facilitate faster, more efficient use. System consistsof an aluminum tray, aluminum leveling board, and a 19 wide
replaceable wood or synthetic take-off board. Meets High School
specifications. Powder coating available for an additional 10%.
Replacement parts available.
MATERIAL SPECIFICATIONS:
Base Board . . . . . . . . . .6063-T6 Aluminum (Ultimate 35ksi, Yield 31ksi)
Tray . . . . . . . . . . . . . . 3003-H14 Aluminum (Ultimate 22ksi, Yield 21ksi)
CONSULTATION:
NFHS rules allow for up to a 24 width take-off board. Although
this may seem like a beneficent allowance, in actuality it often results
in the jumper taking off farther from the foul line. The 8 width
take-off board used at collegiate and international competition
levels will facilitate take-offs closer to the foul line and consequently
longer jumps.
NFHS recommends long jump board placement of 8 (foul line to sand
pit) for girls and 12 for boys. Recommendations for the triple jump are
24 for girls and 32 for boys.
PRICING:
441T HS Take-Off System-Wood. . . . . . . . . . . . . . . . . . . . . . .$503.00
441TS HS Take-Off System-Synthetic . . . . . . . . . . . . . . . . . . . .$480.00
COLLEGE TAKE-OFF BOARD SYSTEM
GENERAL DESCRIPTION:
Redesigned to facilitate faster, more efficient use. System consists ofan aluminum tray, aluminum leveling board, and an 8 wide replaceable
wood or synthetic take-off board. Meets NCAA and High School
specifications. Powder coating available for an additional 10%.
Replacement parts available.
MATERIAL SPECIFICATIONS:
Base Board . . . . . . . . . . . . . 3003 Aluminum (Ultimate 16ksi, Yield 6ksi)
Tray . . . . . . . . . . . . . . 3003-H14 Aluminum (Ultimate 22ksi, Yield 21ksi)
PRICING:
444 College Take-Off System-Wood . . . . . . . . . . . . . . . . . . .$413.00
444S College Take-Off System-Synthetic . . . . . . . . . . . . . . . .$495.00
444
TAKE-OFF BOARDSTAKE-OFF BOARDS
7/30/2019 Catalogo de Material Deportivo 3
9/40Toll Free: (800) 637-3090Phone: (217) 367-8438 Fax: (217) 367-8440 7
362
ALUMINUM CIRCLESW/CROSS BRACING
GENERAL DESCRIPTION:
This Aluminum Circle with Cross Bracing is designed to be
incorporated into concrete to form a (19mm) deep depressed
pad. The circle consists of two half sections fabricated from 3 x
aluminum flat strip with x 1 aluminum angle cross-bracing.
These sections are bolted together prior to installation. This circle
meetsNFHS, NCAA, and IAAF specifications. Dimensions inbrackets are in centimeters. Available in a white powder coat finish
for an additional 10%.
MATERIAL SPECIFICATIONS:
Rim . . . . . . . . . . . . . . . .6063-T6 Aluminum (Ultimate 30ksi, Yield 25ksi)Spokes . . . . . . . . . . . . . .6063-T5 Aluminum (Ultimate 21ksi, Yield 15ksi)
PRICING:
366 Shot/Hammer Circle . . . . . . . . . . . . . . . . . . . . . . . . . . .$557.00
367 Discus Circle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$573.00
ALUMINUM SHOT/HAMMER CIRCLE
GENERAL DESCRIPTION:
This Aluminum Shot/Hammer Circle consists of 1 x x aluminum angle that is roll bent to a 42 (107mm) radius. Four arcs
of chord length 593/8 form the circle. To assemble and secure the
ring, (.64cm) holes are located at the center and ends of each arc.
MATERIAL SPECIFICATIONS:
6063-T5 Aluminum (Ultimate 21ksi, Yield 15ksi)
CONSULTATION:
NFHS rules require that projecting lines, 2 wide and 8 long lying
on the diameter and outside the circumference, shall be used todesignate the back half of the throwing circle.
PRICING:
369 Shot/Hammer Circle . . . . . . . . . . . . . . . . . . . . . . . . . . .$186.00
370
3751
ALUMINUM DISCUS CIRCLE
GENERAL DESCRIPTION:
This Aluminum Discus Circle consists of 1 x x aluminum
angle roll bent to a 497/32 radius. Four arcs of chord length 625/8
form the circle. To assemble and secure the circle, diameter
mounting holes are located at the center and ends of each arc.
MATERIAL SPECIFICATIONS:
6063-T5 Aluminum (Ultimate 21ksi, Yield 15ksi)
CONSULTATION:NFHS rules require that projecting lines, 2 wide and 8 long, lyingon the diameter extended and outside the circumference shall beused to designate the back half of the throwing circle. It is also
required that a 34.92 degree sector shall be marked on the groundand drawn from the center of the throwing circle.
PRICING:
370 Discus Circle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$189.00
ALUMINUM THROWING CIRCLE FORMS
GENERAL DESCRIPTION:
Aluminum throwing circle is a four part bolt together form that is
adaptable for a variety of in-ground installation practices. Drainage
can be easily incorporated. Aluminum exterior bracing creates a
strong frame yet leaves the center open for the smoothest pour and
crack-resistant finish. Outer frame is 2 x 3 aluminum angle. Inner
circle is x 3 flat aluminum bar. Drainage tube not included.
PRICING:
3741 Shot/Hammer Circle Form . . . . . . . . . . . . . . . . . . . . $1,400.00
3751 Discus Circle Form . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,820.00
CIRCLES
HAMMER CONVERSION CIRCLE
GENERAL DESCRIPTION:
The Hammer Conversion Circle is designed to be installed in an
existing discus circle to convert it for the hammer throw. This allows
single circle hammer cages to be used for both hammer and discus
competition. The circle is molded out of a stiff but pliable PVC
plastic. Dropped hammers will not bounce off of or damage it. The
circle consists of four interlocking sections that form a solid, rattle
free ring which is easily installed and removed. The circle is compliant
with NCAA specifications for conversion circles.
PRICING:
362 Hammer Conversion Circle . . . . . . . . . . . . . . . . . . . . . .$752.00
NEW
7/30/2019 Catalogo de Material Deportivo 3
10/40www.gillathletics.com [email protected]
372
373
375
Profile for 375
ALUMINUM SHOT CIRCLE
GENERAL DESCRIPTION:
This Aluminum Shot Circle consists of three 1 x x aluminum
angle sections roll bent to an 42 radius. To facilitate mounting on
a new or existing flat concrete pad, diameter holes are located
at each end and center of each of the three sections. The toeboard
brackets are provided for screw fastening to a synthetic toeboard.
Wedge anchor bolts are provided.
MATERIAL SPECIFICATIONS:
6063-T52 Aluminum (ultimate 21ksi, yield 15ksi)
PRICING:
372 Aluminum Shot Circle . . . . . . . . . . . . . . . . . . . . . . . . . .$170.00
POWDER COATED STEEL SHOT CIRCLE
GENERAL DESCRIPTION:
This Steel Shot Circle consists of two flat segments that are installed
end to end to form a seven foot circle. Each segment is roll bent out
of x 1 steel strip to a radius of 42 This product is designed
to be bolted to the surface of a new or existing level pad. Mounting
holes are punched at the ends of each segment for SS wedge
anchors which are provided. Circle sections are finished with a
baked on white powder coat paint. This circle is compliant with
NFHS, specifications for high schools.
MATERIAL SPECIFICATIONS:
1018 CR Steel (ultimate 64ksi, yield 54ksi)
CONSULTATION:
This circle should be used only for high school facilities. NCAA rule
specifies that circle height must be 19mm (+/- 6mm). The 373 circle is
6mm in height and so should not be specified for collegiate facilities.
The 373 is a 360 degree circle and may only be used with a toe
board allowing for passage of the circle under the board. The Gill
359 and 364 toeboards accommodate this design.
PRICING:
373 Powder Coated Steel Shot Circle . . . . . . . . . . . . . . . . .$211.00
CIRCLES & TOEBOARDSCIRCLES & TOEBOARDS
371Profile for 371 & 373
ALUMINUM CIRCLESW/2 ANGLE PROFILE
GENERAL DESCRIPTION:
This Aluminum Circle is designed to be incorporated into the
concrete to form a deep depressed pad. The circle consists
of two half sections fabricated from 2 x 2 x aluminum
square corner angle. This circle meetsNFHS, NCAA, and IAAF
specifications. Available in a white powder coat finish for an
additional 10%.
MATERIAL SPECIFICATIONS:
6063-T52 Aluminum (ultimate 21ksi, yield 15ksi)
PRICING:
374 Shot/Hammer Circle . . . . . . . . . . . . . . . . . . . . . . . . . . .$350.00
375 Discus Circle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$364.00
POWDER COATED STEEL DISCUS CIRCLE
GENERAL DESCRIPTION:
This Steel Circle consists of three flat segments that are installed
end to end to form an 827/16 circle. Each segment is roll bent out
of steel strip to a radius of 497/32. This product is designed to be
bolted to the surface of a new or existing level pad. Nine SS wedge
anchor bolts are provided to fasten the circle to a concrete pad. If
flat head anchors are used, mounting holes will have to be counter
sunk. Circle sections are finished with a baked on white powder
coat paint. This circle is compliant with NFHS, specifications for
high schools.MATERIAL SPECIFICATIONS:
1018 CR Steel (ultimate 64 ksi, yield 54ksi)
CONSULTATION:
This circle should be used only for high school facilities. NCAA rule
specifies that circle height must be 19mm (+/- 6mm). The 371 circle is
6mm in height and so should not be specified for collegiate facilities.
PRICING:
371 Powder Coated Steel Discus Circle. . . . . . . . . . . . . . . .$229.00
7/30/2019 Catalogo de Material Deportivo 3
11/40Toll Free: (800) 637-3090Phone: (217) 367-8438 Fax: (217) 367-8440 9
363
364 & 373
364
CAST ALUMINUM TOEBOARDFOR
DEPRESSED PAD
GENERAL DESCRIPTION:This Cast Aluminum Toeboard is designed to be used with a
depressed throwing surface formed by an aluminum shot circle
embedded in the concrete pad. Gill aluminum toeboards are cast
from aluminum alloy with a wall thickness of5/16. All aluminum
toeboards are finished with a durable white powder coat paint.
This toeboard meets all NFHS, NCAA, and IAAF requirements.
MATERIAL SPECIFICATIONS:
ALMAG 535 Cast Aluminum (Ultimate 38ksi, Yield 20 ksi)
PRICING:
363 Aluminum Shot Toeboard for Depressed Pad . . . . . . . .$431.00
CAST ALUMINUM TOEBOARDFOR LEVEL PAD
GENERAL DESCRIPTION:
This Cast Aluminum Toeboard is designed to be used on a level
throwing surface with a Gill 373 Steel Shot Circle. This toeboard
can also be mounted over a 2 wide painted circle. Gill aluminum
toeboards are cast from aluminum alloy with a wall thickness of5/16.
All aluminum toeboards are finished with a durable white powder
coat paint. This toeboard meets all NFHS requirements for high
school use.
MATERIAL SPECIFICATIONS:
ALMAG 535 Cast Aluminum (Ultimate 38ksi, Yield 20 ksi)
CONSULTATION:
This 364 toeboard should be used only for high school facilities. NCAA
rule specifies that circle height must be 19mm (+/- 6mm). The 364 is
designed to accommodate a 6mm (1/4) height (surface-mounted) circle
and so should not be specified for collegiate facilities.
PRICING:
364 Aluminum Shot Toeboard for Level Pad. . . . . . . . . . . . .$431.00
SYNTHETIC SHOT TOEBOARD
GENERAL DESCRIPTION:
This Synthetic Toeboard is designed to be used on a level throwing
surface with the Gill 372 Aluminum Shot Circle or the Gill 373
Steel Shot Circle. Optionally, a painted white line may be used to
designate the throwing circle. The toeboard is fabricated from low
density polyethylene. This toeboard meets all NFHS requirements
for high school use.
CONSULTATION:
NFHS rules require that a 34.92 degree sector is marked on the
throwing surface with 2 width lines originating in the center of the
circle and extending through the extremities of the toe board (and
continue out to form an area into which legal puts must be made.
PRICING:
359 Synthetic Shot Toeboard . . . . . . . . . . . . . . . . . . . . . . . . .$261.00
SYNTHETIC SHOT TOEBOARDFOR
DEPRESSED PADS
GENERAL DESCRIPTION:
The Synthetic Toeboard is designed to be used with a3/4 depressed
throwing surface formed by an aluminum shot circle embedded
in the concrete pad. The toeboard is fabricated from low density
polyethylene with a wall thickness of . This toeboard meets all
NFHS, NCAA and IAAF requirements.
PRICING:
358 Synthetic Shot Toeboard for Depressed Pad . . . . . . . . .$261.00
SYNTHETIC SHOT TOEBOARD
GENERAL DESCRIPTION:
8>G8A:ID:7D6G9
8DBE6I>7>A>IN
CIRCLES
TOEBOARDS
366
369
372
373
374
358 359 363 364
3741
7/30/2019 Catalogo de Material Deportivo 3
12/40www.gillathletics.com [email protected]
INDOOR SHOT/WEIGHT THROWCIRCLE
GENERAL DESCRIPTION:
These three Indoor Shot Put/Weight Throw portable circle items are
meant to be utilized together. Wood screws are provided to attach
the toeboard (3680) to the circle (368), while this all attaches to
the throwing surface (3681). This Indoor Throwing Circle is built in
accordance with NCAA specifications. It consists of two sections of
plywood crescents joined on each side by 6 plated steel strap
hinges. Four inch plated steel chest handles are located adjacent to
the four corners of the circle board. The handles lift up for transport
and fold away for storage. The board is coated with medium gray
enamel paint and marked with white stripes designating the throwing
arc orientation. Overall surface covered is 8 x 8 square. The Wood
Shot Indoor Toeboard is fabricated from select yellow pine and
sealed with two coats of white enamel paint. The Throwing Surfaceconsists of three pieces of 7-ply birch plywood that fastens to the
underside of the circle to provide the athlete with a smooth, hard
surface inside the circle.
PRICING:
368 Shot/Weight Throw Circle . . . . . . . . . . . . . . . . . . . . . . .$797.00
3680 Indoor Wood Shot Toeboard . . . . . . . . . . . . . . . . . . . . .$382.00
3681 Shot Throwing Surface . . . . . . . . . . . . . . . . . . . . . . . . . .$274.00
3680
3710
CIRCLES & TOEBOARDSCIRCLES & TOEBOARDS
368
PORTABLE DISCUS CIRCLE PLATFORM
GENERAL DESCRIPTION:
This Portable Discus Circle Platform consists of a 12 x 12 x 2
wood platform and an aluminum discus circle. The wood platform
breaks down into four 8 x 4 sections and four 8 long 2 x 6
stringers. The aluminum discus circle consists of aluminum angle roll
bent to a 497/32 radius.
The wood platform is painted gray. Sector lines are painted white,
2 wide, and set at 34.92 degrees.
The platform and circle are fastened together using hex bolts.
This platform is not meant to be moved while assembled. It is
recommended that the platform be stored laying on a flat even
surface. The panels can be stacked on one another to fit in an
8 x 4 floor space.PRICING:
3710 Portable Discus Platform . . . . . . . . . . . . . . . . . . . . . . $4,101.00
7/30/2019 Catalogo de Material Deportivo 3
13/40Toll Free: (800) 637-3090Phone: (217) 367-8438 Fax: (217) 367-8440 11
DISCUS CAGESDISCUS CAGES
8030Rolling M eadows H igh SchoolRolling M eadows, Illinois
GILL HS STEEL DISCUS CAGE
GENERAL DESCRIPTION:
The 8030 Steel High School Competition Discus Cage consists of
six painted steel net poles with ground sleeves, a vinyl coated net
support cable to reduce net sage, and a weather treated nylon net.
Each pole stands in a 20 deep ground sleeve. The net is 180 lb test
nylon which has been weather treated for longer life. Eighteen inch
steel flip arms secure the 14 x 56 net at the front two poles with
ground stakes used at the back poles. An optional 8 tall barrier net
is available with attaching hardware.
MATERIAL SPECIFICATIONS:
Ground Sleeves . . . . . . . . . . . . . A513 Steel (Ultimate 42ksi, Yield 30ksi)
Poles . . . . . . . . . . .A513 Powder Coated Steel (Ultimate 42ksi, Yield 30ksi)
Net . . . . . . . . . . . . . . . . . . . .Nylon 6, UV stabilized (180 lb break strength)
CONSULTATION:
While the six pole configuration with the outermost (end) poles
being placed 4-5 from the sector lines provides excellent safety for
a 34.92 degree sector, the perception for the thrower may be that
the cage is overly restrictive. In actuality the throwing window is
identical to that provided by seven or eight pole configurations.
PRICING:
8030 Steel High School Discus Cage . . . . . . . . . . . . . . . . . $2,820.00
M2055 Replacement Net for 8030 (14 x 56) . . . . . . . . . . . . . .$567.00
80302 Barrier Net for 8030 . . . . . . . . . . . . . . . . . . . . . . . . . . .$534.00
GILL HS ALUMINUM DISCUS CAGE
GENERAL DESCRIPTION:
The 8020 Aluminum Extended High School Competition Discus
Cage, consists of seven, 14 tall, rolled aluminum net poles with
ground sleeves, a vinyl coated net support cable to reduce net sag,
and a weather treated nylon net. Hinged net arms, at ground level,
hold the net in place at the front of the cage. Each pole stands in a
30 deep ground sleeve. The net is 180 lb test nylon which has been
weather treated for extended service life. The extended cage is
laid out for the 34.92 degree throwing sector and follows the basic
cage mouth dimensions as illustrated in the NFHS 2007 Rule Book,
Appendix A. The out poles of the cage can be moved inward to a
four foot spacing from the sector lines for inside stadium use. An
optional 8 tall barrier net is available with attaching hardware.
MATERIAL SPECIFICATIONS:Poles . . . . . . . . . . . . . . .6063-T6 Aluminum (Ultimate 30ksi, Yield 25ksi)
Net . . . . . . . . . . . . . . . . . . . .Nylon 6, UV stabilized (180 lb break strength)
CONSULTATION:
The seven pole configuration of the 8020 discus cage has become
very popular due to its ability to accommodate the 34.92 degree
sector without causing the thrower to feel overly restricted by the
cage layout.
PRICING:
8020 Aluminum High School Discus Cage . . . . . . . . . . . . . $3,429.00
80201A Replacement Net for 8020 (14 x 68) . . . . . . . . . . . . . .$498.00
80202A Barrier Net for 8020 . . . . . . . . . . . . . . . . . . . . . . . . . . .$764.00
Discus cages cannot provide absolute safety for the conducting of the discusthrow event. The implement landing area (sector) should be cordoned offwith chute rope and pennants placed parallel to and well outside the sectorlines (at least 55 degrees from the center of the circle).
7/30/2019 Catalogo de Material Deportivo 3
14/40www.gillathletics.com [email protected]
HIGH SCHOOL PRO-DOWN DISCUS CAGEW/GROUND SLEEVES
GENERAL DESCRIPTION:
This High School Pro-Down Discus Cage consists of six galvanized
steel upright poles with ground sleeves, five galvanized steel top rungs
to eliminate net sag, and a weather treated nylon net. Each steel pole
is swaged at the top to receive the top rungs. Each pole stands in a
24 deep ground sleeve. The top rungs for a solid frame to supportthe net. The 12 x 63 net is supported by 32 net hooks permanently
attached to the top of the net. The nylon net has breaking strength
of 180 lb and has been weather treated for longer life.
MATERIAL SPECIFICATIONS:
Poles . . . . . . . . . . . . . . . . . . . . .1008 Steel (Ultimate 43.9, Yield 26.1ksi)
Net . . . . . . . . . . . . . . . . . . . .Nylon 6, UV stabilized (180 lb break strength)
CONSULTATION:
The #80401 has been designed to closely meet NFHS specifications
for a discus cage. When planning a facility, it should be understood
that when it comes to discus cages, taller is better. This becomes an
increasingly important factor where out of sector throws have thepotential to land in heavily trafficked areas.
PRICING:
80401 Pro-Down Cage w/ ground sleeves . . . . . . . . . . . . . . $1,426.00
80405 Pro-Down Cage Replacement Net (12 x 63) . . . . . . .$841.00
HIGH SCHOOL PRO-DOWN DISCUS CAGEW/GROUND PLATES
GENERAL DESCRIPTION:
This High School Pro-Down Discus Cage with Surface Plates
consists of six galvanized steel upright poles and surface plates,
five galvanized steel top rungs to eliminate net sag, and a weather
treated nylon net. Each steel tube is swaged at the top to receive
the top rungs. Each pole stands on an 18 square steel surfaceplate. Each surface plate is anchored with four 10 ground spikes.
The upright pole is held in place by an 18 tall internal tube welded
to the plate as well as a 1 diameter ground support pole driven a
foot into the ground through a hole in the plate. A stainless steel
ring clamp secures the upright pole to the support pole. The top
rungs form a solid frame to support the net. The 12 x 63 net is
supported by 32 net hooks permanently attached to the top of the
net. The nylon net has a breaking strength of 180 lb and has been
weather treated for longer life.
MATERIAL SPECIFICATIONS:
Poles . . . . . . . . . . . . . . . . . . . . .1008 Steel (Ultimate 43.9, Yield 26.1ksi)
Net . . . . . . . . . . . . . . . . . . . .Nylon 6, UV stabilized (180 lb break strength)
CONSULTATION:
The 80402 has been designed to closely meet NFHS specifications
for a discus cage. When planning a facility, it should be understood
that when it comes to discus cages, taller is better. This becomes an
increasingly important factor where out of sector throws have the
potential to land in heavily trafficked areas.
PRICING:
80402 Pro-Down Cage w/ ground plates . . . . . . . . . . . . . . . $2,336.00
80405 Pro-Down Cage Replacement Net (12 x 63) . . . . . . .$841.00
80401
DISCUS CAGESDISCUS CAGESDiscus cages cannot provide absolute safety for the conducting of the discusthrow event. The implement landing area (sector) should be cordoned offwith chute rope and pennants placed parallel to and well outside the sectorlines (at least 55 degrees from the center of the circle).
7/30/2019 Catalogo de Material Deportivo 3
15/40Toll Free: (800) 637-3090Phone: (217) 367-8438 Fax: (217) 367-8440 13
732130University of IllinoisChampaign, Illinois
NCAA ALUMINUM DISCUS CAGES
GENERAL DESCRIPTION:
The NCAA Aluminum Discus Cage consists of eight 5.3m tall, rolled
aluminum net poles with ground sleeves and a weather treatednylon net. Each pole stands in a 36 deep ground sleeve. Galvanized
steel tubes support the net between the first two poles on each
side. Four hinged net arms, at ground level, hold the net in place at
the front of the cage. The net is 340 lb test nylon which has been
weather treated for extended service life and features rear entry
access to the cage. The narrow cage opening greatly reduces the
area outside the landing sector that an errant thrown discus can
land in while not impeding a good throw. This layout is still less
restrictive than the current IAAF cage specifications.
MATERIAL SPECIFICATIONS:
Poles . . . . . . . . . . . . . . .6063-T6 Aluminum (Ultimate 30ksi, Yield 25ksi)
Net . . . . . . . . . . . . . . . . . . . .Nylon 6, UV stabilized (340 lb break strength)
CONSULTATION:
The position of the outermost (forward) poles must be not less
than 2.85m from the sector lines. Shot put, discus and hammer areas
should be located close to each other, as many athletes compete in
more than one of these events. Close proximity also accommodates
coaching efficiency.
PRICING:
732130 Aluminum NCAA Discus Cage . . . . . . . . . . . . . . . . . $3,918.00
732133 Replacement Net for 732130 (166 x 686) . . . . . . . .$1,144.00
732132 Optional Barrier Net . . . . . . . . . . . . . . . . . . . . . . . . . . .$903.00
IAAF ALUMINUM DISCUS CAGE
GENERAL DESCRIPTION:
The IAAF Stadium Discus Cage consists of nine 5.3m tall, rolled
aluminum net poles with ground sleeves and a weather treatednylon net. Each pole stands in a 90cm deep ground sleeve.
Galvanized steel tubes support the net between the first two poles
on each side. Four hinged net arms at ground level hold the net in
place at the front of the cage. The net is 340 lb test nylon which has
been weather treated for extended service life and features rear
entry access to the cage. This layout meets IAAF requirements for
the 34.92 degree landing sector in a stadium with spectators all the
way around and other events taking place.
MATERIAL SPECIFICATIONS:
Poles . . . . . . . . . . . . . . .6063-T6 Aluminum (Ultimate 30ksi, Yield 25ksi)
Net . . . . . . . . . . . . . . . . . . . .Nylon 6, UV stabilized (340 lb break strength)
PRICING:732140 Aluminum IAAF Discus Cage . . . . . . . . . . . . . . . . . . . $4,707.00
732143 Replacement Net for 732140 (5m x 25m) . . . . . . . . $1,315.60
732142 Optional Barrier Net . . . . . . . . . . . . . . . . . . . . . . . . . . .$597.00
DISCUS CAGESDISCUS CAGES
EXCLUSIVEEXCLUSIVEREAR ENTRYREAR ENTRY
ACCESS SYSTEMACCESS SYSTEM
Discus cages cannot provide absolute safety for the conducting of the discusthrow event. The implement landing area (sector) should be cordoned offwith chute rope and pennants placed parallel to and well outside the sectorlines (at least 55 degrees from the center of the circle).
7/30/2019 Catalogo de Material Deportivo 3
16/40www.gillathletics.com [email protected]
732100
NCAA DOUBLE RING HAMMER/DISCUS CAGE
GENERAL DESCRIPTION:
This NCAA Double Ring Hammer/Discus Cage consists of eight
rolled aluminum net poles, two galvanized steel door hinge poles,
and two 7m tall aluminum moveable doors. A ground sleeve kit is
sold separately. The main net is 206 x 113 and features rear entryaccess to the cage. The door net is 23 x 148. Both nets are
749 lb test knotted nylon and have been weather treated for
extended service life. This cage is designed to host two circles;
one for the discus competitions, the other one for the hammer
competitions. Per NCAA rules, the net is supported at full cage
height between the door poles and first net support poles.
MATERIAL SPECIFICATIONS:
Ground Sleeves . . . . . . . . . . .1008 Steel (Ultimate 43.9ksi, Yield 26.1ksi)
Poles . . . . . . . . . . . . . . .6063-T6 Aluminum (Ultimate 35ksi, Yield 31ksi)
Net . . . . . . . . . . . . . . . . . . . .Nylon 6, UV stabilized (749 lb break strength)
CONSULTATION:
Two circle (hammer/discus) cages provide increased safety for the
discus throw. Rotating doors allow for a closing down on the
sector. Door position can be adjusted to accommodate heightened
safety for left or right-handed throwers.
PRICING:
732105 NCAA Double Ring Hammer/Discus Cage . . . . . . . $23,103.00
732106 Replacement Main Net for 732105 . . . . . . . . . . . . . . $6,910.00
732102 Replacement Door Net for 732105 . . . . . . . . . . . . . $1,799.00
732108 Optional Barrier Net . . . . . . . . . . . . . . . . . . . . . . . . . . .$705.00
73210501 Ground Sleeve Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,760.00
NCAA HAMMER/DISCUS CAGE
GENERAL DESCRIPTION:
This NCAA Hammer/Discus Cage consists of six rolled aluminum
net poles, two galvanized steel door hinge poles, and two 7m tall
aluminum moveable doors. A ground sleeve kit is sold separately.
The main net is 206 x 968 and features rear entry access to the
cage. The door net is 23 x 148. Both nets are 749 lb test knotted
nylon and have been weather treated for extended service life.
With a discus circle installed in the cage and a Gill 362 Hammer
Conversion circle, this cage can be used for both hammer and discus
competitions. The suggested layout complies with 2007 NCAA rules.
MATERIAL SPECIFICATIONS:
Ground Sleeves . . . . . . . . . . .1008 Steel (Ultimate 43.9ksi, Yield 26.1ksi)
Poles . . . . . . . . . . . . . . .6063-T6 Aluminum (Ultimate 30ksi, Yield 25ksi)
Net . . . . . . . . . . . . . . . . . . . .Nylon 6, UV stabilized (749 lb break strength)
CONSULTATION:
NCAA rule requires hammer cage doors to be a minimum of
6.15m in height. When choosing a hammer cage it is important torecognize that the most critical safety factor is door height. Stated
simply, taller is better. If budgets allow, hammer cages with taller
doors should be considered.
PRICING:
732100 NCAA Hammer/Discus Cage . . . . . . . . . . . . . . . . . $21,924.00
732101 Replacement Main Net for 732100 . . . . . . . . . . . . . . $5,776.00
732102 Replacement Door Net for 732100 . . . . . . . . . . . . . $1,799.00
732103 Optional Barrier Net . . . . . . . . . . . . . . . . . . . . . . . . . . .$632.00
73210001 Ground Sleeve Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,409.00
University of Illinois
Champaign, Illinois
HAMMER/DISCUS CAGESHAMMER/DISCUS CAGES
EXCLUSIVEEXCLUSIVEREAR ENTRYREAR ENTRY
ACCESS SYSTEMACCESS SYSTEM
Discus cages cannot provide absolute safety for the conducting of the discusthrow event. The implement landing area (sector) should be cordoned offwith chute rope and pennants placed parallel to and well outside the sectorlines (at least 55 degrees from the center of the circle).
7/30/2019 Catalogo de Material Deportivo 3
17/40Toll Free: (800) 637-3090Phone: (217) 367-8438 Fax: (217) 367-8440 15
732200
NCAA TALL HAMMER/DISCUS CAGE
GENERAL DESCRIPTION:
This NCAA Tall Hammer/Discus Cage consists of six rolled
aluminum net poles, two galvanized steel door hinge poles, and
two 8m tall aluminum moveable doors. A ground sleeve kit is sold
separately. The main net is 236 x 968 and features rear entryaccess to the cage. The door net is 263 x 148. Both nets are
749 lb test knotted nylon and have been weather treated for
extended service life. With a discus circle installed in the cage and a
Gill 362 Hammer Conversion circle, this cage can be used for both
hammer and discus competitions. The suggested layout complies
with 2007 NCAA rules.
MATERIAL SPECIFICATIONS:
Ground Sleeves . . . . . . . . . . .1008 Steel (Ultimate 43.9ksi, Yield 26.1ksi)
Poles . . . . . . . . . . . . . . .6063-T6 Aluminum (Ultimate 30ksi, Yield 25ksi)
Net . . . . . . . . . . . . . . . . . . . .Nylon 6, UV stabilized (749 lb break strength)
CONSULTATION:
NCAA rule requires hammer cage doors to be a minimum of6.15m in height. When choosing a hammer cage it is important to
recognize that the most critical safety factor is door height. Stated
simply, taller is better. If budgets allow, hammer cages with taller
doors should be considered.
PRICING:
732200 NCAA Tall Hammer/Discus Cage . . . . . . . . . . . . . . $25,139.00
732201 Replacement Main Net for 732200 . . . . . . . . . . . . . . $5,970.00
732202 Replacement Door Net for 732200 . . . . . . . . . . . . . $1,980.00
732103 Optional Barrier Net . . . . . . . . . . . . . . . . . . . . . . . . . . .$632.00
73220001 Ground Sleeve Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,459.00
University of H awaii
Honolulu, Hawaii
NCAA DOUBLE RING TALLHAMMER/DISCUS CAGE
GENERAL DESCRIPTION:
This NCAA Tall Double Ring Hammer/Discus Cage consists of eight
rolled aluminum net poles, two galvanized steel door hinge poles, and
two 8m tall aluminum moveable doors. A ground sleeve kit is sold
separately. The main net is 236 x 113 and features rear entry accessto the cage. The door net is 263 x 148. Both nets are
749 lb test knotted nylon and have been weather treated for
extended service life. This cage is designed to host two circles; one for
the discus competitions, the other one for the hammer competitions.
The suggested layout complies with 2007 NCAA rules. Per NCAA
rules, the net is supported at full cage height between the door poles
and first net support poles.
MATERIAL SPECIFICATIONS:
Ground Sleeves . . . . . . . . . . .1008 Steel (Ultimate 43.9ksi, Yield 26.1ksi)
Poles . . . . . . . . . . . . . . .6063-T6 Aluminum (Ultimate 35ksi, Yield 31ksi)
Net . . . . . . . . . . . . . . . . . . . .Nylon 6, UV stabilized (749 lb break strength)
CONSULTATION:Two circle (hammer/discus) cages provide increased safety for the
discus throw. Rotating doors allow for a closing down on the
sector. Door position can be adjusted to accommodate heightened
safety for left or right-handed throwers.
PRICING:
732205 NCAA Double Ring Tall
Hammer/Discus Cage. . . . . . . . . . . . . . . . . . . . . . . . $25,946.00
732206 Replacement Main Net for 732205 . . . . . . . . . . . . . . $5,909.00
732202 Replacement Door Net for 732205 . . . . . . . . . . . . . $1,980.00
732108 Optional Barrier Net . . . . . . . . . . . . . . . . . . . . . . . . . . .$705.00
73220501 Ground Sleeve Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,810.00
EXCLUSIVEEXCLUSIVEREAR ENTRYREAR ENTRY
ACCESS SYSTEMACCESS SYSTEM
Discus cages cannot provide absolute safety for the conducting of the discusthrow event. The implement landing area (sector) should be cordoned offwith chute rope and pennants placed parallel to and well outside the sectorlines (at least 55 degrees from the center of the circle).
HAMMER/DISCUS CAGESHAMMER/DISCUS CAGES
7/30/2019 Catalogo de Material Deportivo 3
18/40www.gillathletics.com [email protected]
UCLA
Los Angeles, Californ ia732215
IAAF TALL HAMMER CAGE
GENERAL DESCRIPTION:
The IAAF Tall Hammer Cage consists of eight rolled aluminum net
poles, two galvanized steel door hinge poles, and 10m tall aluminum
moveable doors. Each pole stands in a 48 deep ground sleeve.
A ground sleeve kit is sold separately. The main net is 10m x 31.1m
and features rear entry access to the cage. The door net is
10m x 2m. Both nets are 340.7kg test knotted nylon and have
been weather treated for extended service life.
MATERIAL SPECIFICATIONS:
Ground Sleeves . . . . . . . . . . .1008 Steel (Ultimate 43.9ksi, Yield 26.1ksi)
Poles & Doors . . . . . . . . . . . . 6063-T6 Aluminum(Ultimate 30ksi,Yield 25ksi)
Net . . . . . . . . . . . . . . . . . . .Nylon 6, UV stabilized (340.7kg break strength)
CONSULTATION:
The IAAF hammer cage was designed to provide adequate safety
for an in-stadium (within the track oval) cage. In accomplishing thislevel of safety, the cage creates an extremely restrictive feel for the
thrower. Such is the compromise necessary for achieving safety for
a within-the-stadium hammer cage.
PRICING:
732215 IAAF Tall Hammer/Discus Cage . . . . . . . . . . . . . . . . $29,085.00
732216 Replacement Main Net for 732215 . . . . . . . . . . . . . . $7,424.00
732217 Replacement Door Net for 732215 . . . . . . . . . . . . . $1,633.00
732218 Optional Barrier Net . . . . . . . . . . . . . . . . . . . . . . . . . $1,330.00
73221501 Ground Sleeve Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,862.00
SHOT CAGE
GENERAL DESCRIPTION:
This Shot Cage consists of
four net poles with ground
sleeves, a vinyl coated netsupport cable to reduce netsag, and a weather treated
nylon net. Steel poles arefinished with a durable whitepowder coat paint. Each pole
stands in a 20 deep ground sleeve. The net is 340 lb test nylonwhich has been weather treated for longer life. Eighteen inch steelflip arms secure the 14 by 426 net at the front two poles with
ground stakes used at the back poles.
MATERIAL SPECIFICATIONS:
Poles . . . . . . . . . . . . . . .6063-T6 Aluminum (Ultimate 30ksi, Yield 25ksi)
Poles . . . . . . . . . . . . (A513 Powder Coated Steel Ultimate 42ksi, Yield 30ksi)
Net . . . . . . . . . . . . . . . . . . . .Nylon 6, UV stabilized (340 lb break strength)CONSULTATION:
The use of a shot cage is required by neither NFHS nor NCAA
rules. However, with the ever increasing use of the spin technique,a shot cage should be considered. A predominance of throwerschanging from the glide to the spin technique has changed the eventfrom a linear to a rotational venue, resulting in an increase in the
frequency of out of sector throws. This is especially true following
the implementation of the 34.92 degree sector.
PRICING:
805 Steel Shot Cage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,796.00
8050 Aluminum Shot Cage . . . . . . . . . . . . . . . . . . . . . . . . . $2,233.00
M2054 Replacement Main Net . . . . . . . . . . . . . . . . . . . . . . . . . .$567.00
HAMMER & SHOT CAGESHAMMER & SHOT CAGESDiscus cages cannot provide absolute safety for the conducting of the discusthrow event. The implement landing area (sector) should be cordoned offwith chute rope and pennants placed parallel to and well outside the sectorlines (at least 55 degrees from the center of the circle).
805
7/30/2019 Catalogo de Material Deportivo 3
19/40Toll Free: (800) 637-3090Phone: (217) 367-8438 Fax: (217) 367-8440 17
732220
HIGH SCHOOL PORTABLE DISCUS CAGE
GENERAL DESCRIPTION:
This High School Portable Discus Cage is designed to be set up and
removed as needed. The cage consists of six aluminum net poles with
steel bases, weather treated nylon net, and replaceable bungee cords
to secure the net at each base. The steel bases are each furnished
with two 8 wheels, allowing the assembled net poles to be rolled into
position with ease. All steel parts are finished with a durable black
powder coat paint. Pole bases are weighted with five gallon, heavyduty plastic jugs which are to be filled with sand or water. The cage
poles stand 14 tall. The net is #504 knotless, nylon netting with a
breaking strength of over 180 lb.
MATERIAL SPECIFICATIONS:
Bases . . . . . . . . . . . . A500 Grade B Steel (Ultimate 58ksi, Yield 45.7ksi)
Poles . . . . . . . . . . . . . . .6063-T6 Aluminum (Ultimate 30ksi, Yield 25ksi)
Net . . . . . . . . . . . . . . . . . . . .Nylon 6, UV stabilized (180 lb break strength)
CONSULTATION:
The exponential growth of the use of synthetic turf fields at all
levels has generated substantial concern about the compatibility of
these surfaces with the throwing events. This is an evolving area of
expertise, but the UEFA, the European governing body for soccerhas produced guidelines on synthetic turf fields which state that
the staging of the shot put and discus throw on synthetic turf fields
does no serwious damage to the turf. The discus has a stronger
tendency to skip (bounce) when landing on synthetic turf. This
phenomenon should be considered when making cage and landing
area location decisions. NFHS state that the outermost poles should
be positioned 4-5 from the sector line. Increased safety can be
achieved by reducing this distance.
PRICING:
732220 High School Portable Discus Cage. . . . . . . . . . . . . . . $5,790.00
M2055 Replacement Net for 732220 (14 x 56) . . . . . . . . . . . .$567.00
NCAA PORTABLE DISCUS CAGE
GENERAL DESCRIPTION:
This NCAA Portable Discus Cage is designed to be set up and
removed as needed. The cage consists of eight aluminum net poles
with steel bases, weather treated nylon net, and replaceable bungee
cords to secure the net at each base. The steel bases are each
furnished with two wheels, allowing the assembled net poles to be
rolled into position with ease. All steel parts are finished with durable
black powder coat paint. Pole bases are weighted with five gallon,heavy duty plastic jugs which are to be filled with sand or water. The
cage poles stand 5.3m tall. The net is #42A knotless, nylon netting
with a breaking strength of 340 lb test. In practice fields, the front net
poles can be moved out to widen the cage mouth.
MATERIAL SPECIFICATIONS:
Bases . . . . . . . . . . . . A500 Grade B Steel (Ultimate 58ksi, Yield 45.7ksi)
Poles . . . . . . . . . . . . . . .6063-T6 Aluminum (Ultimate 30ksi, Yield 25ksi)
Net . . . . . . . . . . . . . . . . . . . .Nylon 6, UV stabilized (340 lb break strength)
CONSULTATION:
The UEFA, the European governing body for soccer has produced
guidelines on synthetic turf fields which state that the staging of the
shot put and discus throw on synthetic turf fields does no seriousdamage to the turf. The discus has a stronger tendency to skip (bounce)
when landing on synthetic turf. This phenomenon should be considered
when making cage and landing area location decisions.
The position of the outermost (forward) poles must be not less
than 2.85m from the sector lines. Position of these poles may be
closer to the sector lines for greater safety (with the permission of
event participants/institutions).
PRICING:
732230 NCAA Portable Discus Cage . . . . . . . . . . . . . . . . . . . $8,750.00
732131A Replacement Net for 732230 (166 x 686) . . . . . . . .$894.00
PORTABLE CAGESPORTABLE CAGESDiscus cages cannot provide absolute safety for the conducting of the discusthrow event. The implement landing area (sector) should be cordoned offwith chute rope and pennants placed parallel to and well outside the sectorlines (at least 55 degrees from the center of the circle).
7/30/2019 Catalogo de Material Deportivo 3
20/40www.gillathletics.com [email protected]
PORTABLE SHOT CAGE
GENERAL DESCRIPTION:
This Portable Shot Cage is designed to be set up and removed as
needed. The cage consists of four aluminum net poles with steel bases,
weather treated nylon net, and replaceable bungee cords to secure the
net at each base. The steel bases are each furnished with two 8 wheels,
allowing the assembled net poles to be rolled into position with ease.All steel parts are finished with durable black powder coach paint. Pole
bases are weighted with five gallon, heavy duty plastic jugs which are to
be filled with sand or water. The cage poles stand 14 tall. The net is
#42A knotless, nylon netting with a breaking strength of 340 lb test. The
cage can be set up to fit any size sector.
MATERIAL SPECIFICATIONS:
Bases . . . . . . . . . . . . A500 Grade B Steel (Ultimate 58ksi, Yield 45.7ksi)
Poles . . . . . . . . . . . . . . .6063-T6 Aluminum (Ultimate 30ksi, Yield 25ksi)
Net . . . . . . . . . . . . . . . . . . . .Nylon 6, UV stabilized (340 lb break strength)
CONSULTATION:
The use of a shot cage is required by neither NFHS nor NCAA rules.
However, with the ever increasing use of the spin technique, a shot cageshould be considered. A predominance of throwers changing from
the glide to the spin technique has changed the event from a linear to a
rotational venue, resulting in an increase in the frequency of out of sector
throws. This is especially true following the implementation of the 34.92
degree sector. The portable shot cage allows for the quick set-up, staging
and take-down of the event. With the exceptional demands being made
of synthetic turf fields these days, portability is essential.
PRICING:
732260 Portable Shot Cage. . . . . . . . . . . . . . . . . . . . . . . . . . . $5,047.00
732261 Replacement Main Net for 732260 (14 x 44) . . . . . . .$527.00
732240M ichael A. Carroll Stadium
Indianapolis, Indiana
IAAF PORTABLE DISCUS CAGE
GENERAL DESCRIPTION:
This IAAF Portable 5m Discus Cage is designed to be set up and
removed as needed. The cage consists of nine aluminum net poles
with steel bases, weather treated nylon net, and replaceable bungee
cords to secure the net at each base. The steel bases are each
furnished with two 8 wheels, allowing the assembled net poles to berolled into position with ease. All steel parts are finished with durable
black powder coat paint. Pole bases are weighted with five gallon,
heavy duty plastic jugs which are to be filled with sand or water. The
cage poles stand 5.1m tall. The net is a #42A knotless, nylon netting
with a breaking strength of 154.2kg test. In practice fields, the front
net poles can be moved out to widen the cage mouth.
MATERIAL SPECIFICATIONS:
Bases . . . . . . . . . . . . A500 Grade B Steel (Ultimate 58ksi, Yield 45.7ksi)
Poles . . . . . . . . . . . . . . .6063-T6 Aluminum (Ultimate 30ksi, Yield 25ksi)
Net . . . . . . . . . . . . . . . . . . .Nylon 6, UV stabilized (154.2kg break strength)
CONSULTATION:
The UEFA, the European governing body for soccer has producedguidelines on synthetic turf fields which state that the staging of the
shot put and discus throw on synthetic turf fields does no serious
damage to the turf. The discus has a stronger tendency to skip
(bounce) when landing on synthetic turf. This phenomenon should
be considered when making cage and landing area location decisions.
PRICING:
732240 IAAF Portable Discus Cage . . . . . . . . . . . . . . . . . . . $11,300.00
732141A Replacement Net for 732240 (5m x 25m) . . . . . . . . $1,070.00
PORTABLE CAGESPORTABLE CAGESDiscus cages cannot provide absolute safety for the conducting of the discusthrow event. The implement landing area (sector) should be cordoned offwith chute rope and pennants placed parallel to and well outside the sectorlines (at least 55 degrees from the center of the circle).
7/30/2019 Catalogo de Material Deportivo 3
21/40Toll Free: (800) 637-3090Phone: (217) 367-8438 Fax: (217) 367-8440 19
NCAA PORTABLE INDOOR CAGE
GENERAL DESCRIPTION:
This NCAA Portable Indoor Weight Cage is designed to be set up
and removed as needed. The cage consists of three aluminum net
poles with steel bases, two aluminum doors with steel bases, and
nylon nets for the cage and the doors. The steel bases are each
furnished with two wheels, allowing the assembled doors and net
poles to be rolled into position with relative ease. All steel parts are
finished with durable black powder paint. Pole bases are weighted
with five gallon, heavy duty plastic jugs which are to be filled with
sand or water. The cage poles stand 14 tall. The nets are 560 lb
test, #72 knotted, nylon netting.MATERIAL SPECIFICATIONS:
Bases . . . . . . . . . . . . A500 Grade B Steel (Ultimate 58ksi, Yield 45.7ksi)
Poles . . . . . . . . . . . . . . .6063-T6 Aluminum (Ultimate 30ksi, Yield 25ksi)
Doors . . . . . . . . . . . A500 Grade B Steel (Ultimate 58ksi, Yield 45.7ksi)
Net . . . . . . . . . . . . . . . . . . . .Nylon 6, UV stabilized (560 lb break strength)
732250
Illinois Stat e University
No rmal, Illinois
CONSULTATION:
This cage should be used with the Gill 368 circle and 3681 throwing
circle surface.
PRICING:
732250 NCAA Portable Indoor Cage . . . . . . . . . . . . . . . . . . $9,950.00
732251 Replacement Net for 732250 (14 x 61) . . . . . . . . . . $1,404.00
PORTABLE CAGESPORTABLE CAGESDiscus cages cannot provide absolute safety for the conducting of the discusthrow event. The implement landing area (sector) should be cordoned offwith chute rope and pennants placed parallel to and well outside the sectorlines (at least 55 degrees from the center of the circle).
7/30/2019 Catalogo de Material Deportivo 3
22/40www.gillathletics.com [email protected]
717
VAULT BOXESVAULT BOXES
500
ALUMINUM VAULT BOX
GENERAL DESCRIPTION:
This Aluminum Vault Box is fabricated from aluminum tempered to a
T6 condition. The sides of the box are cut and folded from1/8 thick
sheets. The box bottom and backstop plates are formed from
plate welded to the sides along the outside edges. The reinforced
backstop prolongs the life of the box. The outer edges of the box
are folded down to eliminate sharp edges. Two outer side wings
secure the box position when placed in concrete. Once installed,
you should never have to remove it. This product meets NFHS,
NCAA and IAAF specifications.
MATERIAL SPECIFICATIONS:
6061-T6 Aluminum (Ultimate 45ksi, Yield 40ksi)
CONSULTATION:
For the pole vault, it is especially important that runways beoriented to take advantage of prevailing wind. The pole vault should
not be placed where prevailing winds are opposing or crossing the
runway. Sun and lighting reflection also are concerns in the vault.
PRICING:
502 Aluminum Vault Box . . . . . . . . . . . . . . . . . . . . . . . . . . . .$397.00
ALUMINUM VAULT BOXLID
GENERAL DESCRIPTION:
Fits the 500, 502 and 505 vault boxes.1/4 supports prevents lid from
sagging. When the 50201 is covered with all weather track material,
the lid will fit flush with the runway surface. The 50202 provides a
flush mount without track material.
MATERIAL SPECIFICATIONS:
6061-T6 Aluminum (Ultimate 45ksi, Yield 40ksi)
PRICING:
50201 Aluminum Vault Box Lid (recessed mount) . . . . . . . . . .$350.00
50202 Aluminum Vault Box Lid (flush mount) . . . . . . . . . . . . .$375.00
CERTIFIED SKYDEX SOFT VAULT BOX
GENERAL DESCRIPTION:
The IAAF certified Skydex Soft Vault Box represents a quantum leap
forward in pole vault safety. This revolutionary new vault box provides
greatly increased safety with no effect on the vaulters experience.
Enhanced safety is accomplished through the integration on Skydex
Smarter Cushioning technology into the design of the vault box without
affecting the feel. Redesigned for easier installation.
CONSULTATION:
The 507 Skydex Vault Box negates the need for a 717 Vault Box
Collar. G-Max rating of this revolutionary product is enhanced by
a factor of four over conventional boxes. Five year warranty on
polymer surface cover.
PRICING:
507 SkydexTM Soft Vault Box . . . . . . . . . . . . . . . . . . . . . . . $1,665.0050701 Vault Box Recessed Cover . . . . . . . . . . . . . . . . . . . . . . .$329.00
507
502
50201
VAULT BOXCOLLARGENERAL DESCRIPTION:
This Vault Box Collar is required by the NFHS for all pole vault
facilities. The 2003 high school rule requiring all hard surfaces to be
covered between vault box and pit is addressed with this vault box
collar. The collar allows for no interference with the pole vault pole
action and the bright yellow color offers a great target for the athlete.
PRICING:
717 Vault Box Collar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$234.00
0
5 ft .
10 ft .
15 ft .
20 ft .
No more than 200 Gs when testing in
accordance with ASTM F1292
Peak G:99
Peak G>200
FALL HEIGHT TESTING
VSSKYDEX STANDARD
SKYDEX
STANDARD
VAULT BOX VAULT BOX
17 6
4
7/30/2019 Catalogo de Material Deportivo 3
23/40Toll Free: (800) 637-3090Phone: (217) 367-8438 Fax: (217) 367-8440 21
50401504
STEEL VAULT BOX
GENERAL DESCRIPTION:
This Steel Vault Box is fabricated of steel with fold and weld
construction. The vault box features flanged edges and flared sides
to prevent damage to the pole and is finished with a white powder
coat finish. This product meets NFHS, NCAA, and
IAAF specifications.
MATERIAL SPECIFICATIONS:
AISI 1011 Steel (Ultimate 53ksi, Yield 30ksi)
PRICING:
500 Steel Vault Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$296.00
UNIVERSAL VAULT BOXLID
GENERAL DESCRIPTION:
This Universal Vault Box Lid is designed to fit over all styles of vault
boxes. Constructed of hot rolled steel with anti-slip surface it is
finished with a durable white powder coat process.
PRICING:
503 Steel Universal Vault Box Lid . . . . . . . . . . . . . . . . . . . . .$255.00
SAFETYMAXVAULT BOXINSERT
GENERAL DESCRIPTION:
Inspired by Olympic medalist and World renowned
pole vault coach, Jan Johnson. Extensive testing shows this design
greatly improves vaulter safety without pole interference. This collar
provides additional protection by padding otherwise exposed hard
surfaces. Patent pending.
PRICING:
720 SafetyMax Vault Box Insert . . . . . . . . . . . . . . . . . . . . . . .$512.00
500
503
505
505SP
CAST ALUMINUM VAULT BOX
GENERAL DESCRIPTION:
This Cast Aluminum Vault Box is made of 100%cast aluminum with
a wall thickness of and a white powder coat finish. The inside
corners are rounded for unhindered pole rotation. This durable
vault box is guaranteed against cracking or warping. This product
meets NFHS, NCAA and IAAF specifications.
MATERIAL SPECIFICATIONS:319.0-F Aluminum (Ultimate 27ksi, Yield 18ksi)
CONSULTATION:
For the pole vault, it is especially important that runways be
oriented to take advantage of prevailing wind. The pole vault should
not be placed where prevailing winds are opposing or crossing the
runway. Sun and lighting reflection also are concerns in the vault.
PRICING:
505 White Cast Aluminum Vault Box . . . . . . . . . . . . . . . . . .$842.00
505SP Orange Powder Coated Cast Aluminum
Vault Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$877.00
STAINLESS STEEL VAULT BOX
GENERAL DESCRIPTION:
This Stainless Steel Vault Box provides wide rounded edges to
prevent poles from being damaged. This is an excellent choice
for warm climates. This product meets NFHS, NCAA, and
IAAF specifications.MATERIAL SPECIFICATIONS:
304L Stainless Steel (Ultimate 81.8ksi, Yield 30.5ksi)
CONSULTATION:
For the pole vault, it is especially important that runways be
oriented to take advantage of prevailing wind. The pole vault should
not be placed where prevailing winds are opposing or crossing the
runway. Sun and lighting reflection also are concerns in the vault.
PRICING:
504 Stainless Steel Vault Box . . . . . . . . . . . . . . . . . . . . . . . . .$665.00
50401 Stainless Steel Vault Box Lid . . . . . . . . . . . . . . . . . . . . . .$453.00
7/30/2019 Catalogo de Material Deportivo 3
24/40www.gillathletics.com [email protected]
STEEPLECHASESTEEPLECHASE
730146730134
STEEPLECHASE WATER JUMP BARRIERS
GENERAL DESCRIPTION:
This Water Jump Barrier with ground sleeves provides a rigid hurdle
for the water jump. The barrier has a spring loaded top for easy
height adjustment. It adjusts to three heights: 30, 33, and 36 inches.
Includes ground sleeves for in ground installation and is compatible
with the F510 water jump form.
A water barrier seal is required by NCAA rule and IAAF rule, and is
sold separately.
MATERIAL SPECIFICATIONS:
A500 Grade B Steel (Ultimate 58ksi, Yield 45.7ksi)
CONSULTATION:
Sleeve installation for the 730134 water jump barrier is critical.
Barrier height accuracy is dependent on sleeve depth.
PRICING:
730134 Water Jump Barrier-Ground Sleeves . . . . . . . . . . . . . $1,950.00
730145B Water Jump Barrier Seal-Aluminum . . . . . . . . . . . . . . .$487.00
730145V Water Jump Barrier Seal-Vinyl . . . . . . . . . . . . . . . . . . . .$215.00
STEEPLECHASE WATER JUMP COVER
GENERAL DESCRIPTION:
This Steeplechase Water Jump Cover is fabricated from extruded
aluminum seat plank. Three planks per panel are securely welded
together in a frame of aluminum angle. Each panel comes with four
retractable handles for easy installation and removal. The supporting
structure for these panels is fabricated from aluminum tube. Each
main support beam has a supporting leg assembly bolted to it. The
addition or removal of stainless steel washers allow each leg to be
customer fit to its position. Position pins at the front of each beam
engage holes in the front wall support tube to lock them in place.
To ensure a proper fit, production begins only upon receipt of form
730146-3. Measurements in brackets are in centimeters.
The 730146 is designed for a track constructor to apply the
same track surface as on the track for a seamless design.
MATERIAL SPECIFICATIONS:6063-T6 Aluminum (Ultimate 35ksi, Yield 31ksi)
PRICING:
730146 Steeplechase Water Jump Cover . . . . . . . . . . . . . . . . $6,249.00
GENERAL DESCRIPTION:
This Steeplechase Water Jump Barrier for surface mount is
adjustable to three heights: 30, 33, and 36 inches. If needed, it can be
quickly removed and reinstalled. Two steel pins and four clamping
knobs securely lock the barrier in each position. Internal weight
compensation springs and PVC liners separating the inner and outer
leg tubes substantially ease beam height adjustment. The beam is a
square steel tube, covered on three sides with thick Vultraktrack surface.
The leg assemblies are fabricated from round tubular steel. The
leg assemblies bolt securely to half inch thick stainless steel anchor
plates. These plates are secured to the top of the pit wall with four
concrete anchors each. Plates are anchored to new and existing
8 thick walls. For thicker walls, center the plate on the wall. Oval
holes in the leg mounting plates allow for small variations in anchor
plate placement. A 11/8 wrench is required to remove and reinstall
the barrier.
Compatible with F500 waterjump form.
A water barrier seal is required by NCAA rule and IAAF rule , and
is sold separately.
MATERIAL SPECIFICATIONS:
A500 Grade B Steel (Ultimate 58ksi, Yield 45.7ksi)
CONSULTATION:
The 730144A water jump barrier is the best choice when installing a
new barrier in an existing water jump facility. Surface mounting plates
allow for relatively simple placement and installation.
The 730145 provides a seal between the barrier uprights to aid
competitors with depth perception.
PRICING:730144A Water Jump Barrier-Surface Mount . . . . . . . . . . . . . . $2,557.00
730145B Water Jump Barrier Seal-Aluminum . . . . . . . . . . . . . . .$487.00
730145V Water Jump Barrier Seal-Vinyl . . . . . . . . . . . . . . . . . . . .$215.00
STEEPLECHASE WATER JUMP BARRIERS - SURFACE MOUNT
7/30/2019 Catalogo de Material Deportivo 3
25/40Toll Free: (800) 637-3090Phone: (217) 367-8438 Fax: (217) 367-8440 23
F510F510F500
STEEPLECHASE WATER JUMP FORMS
GENERAL DESCRIPTION:
The Steeplechase Water Jump Form takes the guess work out of
form building. It is prefabricated to meet NFHS, NCAA and IAAF
specifications, which facilitates easy set up and convenient concrete
pour. Structure is made of specially folded 1/8 aluminum to maximize
strength and includes designed inner wall supports that allow the
concrete to flow through and set evenly. This form also is designed
to fit the Gill water jump cover 730146. Drain valve is not included.
The F500 is compatible with 730144A water jump barrier.
The F510 water jump form has integrated ground sleeves and is
compatible with 730134 water jump barrier.
The F50050 valve option includes an installed front wall valve and
is compatible with all Gill steeplechase water jump forms. The only
hook up is the outgoing pipe to the drain source. The valve is easily
accessible for maintenance or replacement.
MATERIAL SPECIFICATIONS:
3003-H14 Aluminum (Ultimate 22ksi, Yield 21ksi)CONSULTATION:
The steeplechase water jump pit may be positioned either inside or
outside the track oval. NCAA recommendation is that it be placed
inside the track. It is mandatory that it be placed on the curve prior
to the finish line. The landing surface inside the water jump should
be composed of non-skid, shock-absorbent material.
PRICING:
F500 Steeplechase Water Jump Form . . . . . . . . . . . . . . . . . $5,109.00
F510 Steeplechase Water Jump Form-Ground Sleeve . . . . . . $5,396.00
F50050 Valve Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$697.00
VALUE PACK500
PACKAGE INCLUDES:
F500 Steeplechase Water Jump Form
730144A Steeplechase Water Jump Barrier-surface
mount version
PRICING:
VPF500 Value Pack500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $7,490.00
VALUE PACK510
PACKAGE INCLUDES:
F510 Steeplechase Water Jump Form with integrated
ground sleeves
730134 Steeplechase Water Jump Barrier-ground sleeve version
PRICING:
VPF510 Value Pack510 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6,722.00
F50050 VALVE OPTION GROUND SLEEVE
7/30/2019 Catalogo de Material Deportivo 3
26/40www.gillathletics.com [email protected]
INTERNATIONAL TRACKCURBING
GENERAL DESCRIPTION:
Heavy gauge aluminum design features a fluted dome-shaped top.
Each section of curbing is notched at one end to allow easy drop in
or removal of section. The curbing is supported by tall ribbed
feet for rapid drainage. Optional pin kit available to help keep the
curbing from shifting on the track. Permanent installation curbing
includes two anchor pins for every 20 section. (Installer to supply
epoxy to anchor pins in place.) Meets NCAA specifications.
IAAF certified.
MATERIAL SPECIFICATIONS:
6063-T6 Aluminum (Ultimate 35ksi, Yield 31ksi)
CONSULTATION:
Track curbing is not required by NCAA rule for the steeplechase
lane. The white line defining the lane to the water jump may bemarked with cones every 4m. Where budgets allow, track curbing
should be incorporated into the track design for the steeplechase.
PRICING:
Non-permanent Installation Curbing851A Plain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $8.50/per linear foot
852A Anodized (Gold or Silver) . . . . . . . . . . . . . . . . . $12.50/per linear foot
852P Powder Coated . . . . . . . . . . . . . . . . . . . . . . . . . $10.75/per linear foot
851P Base pins (set of 12) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $139.00
Permanent Installation Curbing853A Plain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $8.50/per linear foot
854A Anodized (Gold or Silver) . . . . . . . . . . . . . . . . . $12.50/per linear foot
854P Powder Coated . . . . . . . . . . . . . . . . . . . . . . . . . $10.75/per linear foot
3-LANE TRACKGATE
GENERAL DESCRIPTION:
This 3 lane track gate effectively discourages joggers and recreational
runners from using the three inside lanes and causing premature anduneven track surface wear. A 24 steel ground sleeve with locking
mechanism is provided for simple lift and rotate operation to allow
training on inside lanes. With the use of a pad lock, the gate can be
secured in position, preventing the gate from being lifted and rotated.
The gate is designed to control traffic on the three inside lanes
yielding reduced surface wear. A set of four gates provides optimal
traffic control and surface protection. Custom colors are available for
a 10%upcharge.
MATERIAL SPECIFICATIONS:
6063-T52 Aluminum (Ultimate 27ksi, Yield 21ksi)
CONSULTATION:Typical track gate placement is at the four straightaway to curve
transition points.
PRICING:
8540 Gill 3-Lane Track Gate . . . . . . . . . . . . . . . . . . . . . .$1,040.00/ea
8540P Track Gate Post Pad . . . . . . . . . . . . . . . . . . . . . . . . . . $49.50/ea
NTERNATIONAL TRACKCURBING
GENERAL DESCRIPTION:
-
851A
INFIELD INSTALLATIONSINFIELD INSTALLATIONS
8540P
8540
Powder-CoatColor Options
NAVY BLUE ROYAL BLUE YELLOW GOLD OLD GOLDLIGHT BLUE DARK GREEN KELLY GREEN REDORANGE MAROON PURPLE WHITE BLACK GRAY SILVER
7/30/2019 Catalogo de Material Deportivo 3
27/40Toll Free: (800) 637-3090Phone: (217) 367-8438 Fax: (217) 367-8440 25
F91033F900
F92033
F93033
VERSACOM BOX- SYNTHETIC VERSION
GENERAL DESCRIPTION:This VersaCom Box provides a junction for electricity and cable
hookups. This box can be put in virtually any location around
performance areas of varying surfaces. The open bottom of the
VersaCom Box provides adequate drainage and conduit entry,
while the hand holes in the cover allow easy access. Full box has a
divider plate that is also provided to help keep electrical equipment
segregated. The main box structure is made of thick folded
aluminum. The lid is constructed out of1/8 aluminum, reinforced by
angle for maximum support and durability.
This version allows material to be bonded or poured onto the top
of the lid to match the surrounding surface. The F91033 and F93033
versions have black Vultrak bonded to the lid. This addition is usually
for asphalt applications (this material can also be painted).Full - Dimensions: 30 L x 18 W x 14 D w/ wall thickness
Half - Dimensions: 15 L x 18 W x 14 D w/ wall thickness
MATERIAL SPECIFICATIONS:
3003 Aluminum (Ultimate 16ksi, Yield 6ksi)
CONSULTATION:
When installing VersaCom Boxes, there are three things to keep in mind;
location, location and location. The boxes should be installed to provide
optimal proximity to communication, electrical and timing systems.
PRICING:
F910 VersaCom Box - Synthetic Version . . . . . . . . . . . . . . . .$821.00F91033 VersaCom Box - Black Vultrak Factory Installed . . . . . . . . . $971.00
F930 VersaCom Half Box - Synthetic Version . . . . . . . . . . . . .$524.00
F93033 VersaCom Half Box - Black Vultrak
Factory Installed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$629.00
VERSACOM BOX- FLUSH MOUNT VERSION
GENERAL DESCRIPTION:
The VersaCom box provides a junction for electricity and cable
hookups. The VersaCom Box can be put in virtually any location
around performance areas of varying surfaces. The open bottom
VersaCom Box provides adequate drainage and conduit entry,
while the hand holes in the cover allow easy access. Full box has adivider plate that is also provided to help keep electrical equipment
segregated. This version is designed to sit flush to the surface
without adding any surface material to the box lid.Full - Dimensions: 30 L x 18 W x 1
Top Related