• No apunte el rayo láser directamente a los ojos.
• No supere los 10 metros de distancia entre el receptor y el apuntador.
• Este producto no es un juguete; manténgalo fuera del alcance de los niños.
• No exponga el equipo a temperaturas extremas ni al agua.
• Límpielo con un paño suave y seco.
Alimentación apuntador: 1,5 V --- (1x AAA)
Alimentación receptor: 5 V --- (x USB)
Frecuencia de transmisión 2,4 GHz
Longitud de onda láser: 630 - 670 nm
Potencia láser: <1 mW
PRECAUCIONES
La información que se muestra en este manual sirve únicamente como referencia sobre el producto. Debido a actualizaciones pueden existir diferencias. Por favor, consulte nuestra página web www.steren.com para obtener la versión más reciente del manual.
Siguiente diapositiva
Diapositiva anterior
Activar láser
Salida del láser
Compartimento de batería
Receptor
NOTA: No requiere instalación de software para su funcionamiento.
Retire el receptor. Antes de utilizar el producto, por favor lea el siguiente instructivo.Control de diapositivas
con apuntador láser
COM-561
Manual de instrucciones Precauciones Partes del control inalámbrico Instalación de batería Modo de uso Especificaciones1017AV2.0
1 Conecte el receptora un puerto USB de su PC.
Abra el documento que desea proyectar.
Comience a manipular la presentación con el control.
Presione para retirar la tapa del compartimento de batería.
Inserte una batería nueva (AAA).
Asegúrese de colocar la batería con la polaridad correcta, ycoloque la tapa de nuevo.
2
3
4
• Do not point the laser beam directly into the eyes.
• Do not exceed 10 meters between the receiver and the pointer.
• This product is not a toy; Keep out of children reach.
• Do not expose the equipment to extreme temperatures or water.
• Clean with a soft, dry cloth.
Laser pointer input: 1,5 V - - - (1x AAA)
Receiver input: 5 V - - - (x USB)
Transmission frequency: 2.4GHz
Laser wave length: 630-670 nm
Laser power output: <1mW
CAUTIONS
The information shown in this manual serves as a reference for the product. Due to updates there may be differences. Please refer to our website www.steren.com for the latest version of the manual.
Next slide
Previous Slide
Activate laser
Laser output
Battery compartment
Receiver
NOTE: No software installation required for operation.
Remove the receiver.
Before using the product, please read the following instructions.Presenter
with laser pointer
COM-561
Instruction manual Cautions Wireless control parts Battery installation How to use Specifications 1017AV2.0
1 Connect the receiver to a USB port on your PC.
Open the document you want to project.
Start manipulating the presentation with the control.
Press to remove the battery compartment cover.
Insert a new battery (AAA).
Be sure to insert the battery with the correct polarity, andreplace the cover.
2
3
4