1
Decodificador de TV digital terrestre para canales de alta
definición HDTV y SDTV
208-900CR
V1.0 0117AManual de instrucciones
1) Por favor antes de usar este producto lea estas instrucciones.
2) Guarde estas instrucciones.
3) Respete todas las advertencias.
4) Siga todas las instrucciones.
5) No utilice este aparato cerca del agua.
6) Limpie sólo con un paño seco.
7) No bloquee las aberturas de ventilación, instálelas de acuerdo con las instruc-ciones.
8) No instale cerca de fuentes de calor tales como radiadores, registros de calor, estufas u otros aparatos (incluyendo amplificadores) que produzcan calor.
9) No anule el propósito de seguridad del enchufe polarizado. Si el enchufe suministrado no encaja en su tomacorriente, consulte a un electricista para reemplazar el tomacorriente obsoleto.
10) Proteja el cable de alimentación contra pisadas, especialmente en los enchufes, tomacorrientes y el punto donde salen del aparato.
11) Utilice únicamente accesorios especificados por el fabricante.
12) Desenchufe este aparato durante tormentas eléctricas o cuando no se utilice durante largos períodos de tiempo.
13) En caso de ser necesario acuda con personal de servicio calificado. Se requi-ere mantenimiento cuando el aparato ha sido dañado de alguna manera, como el cable de alimentación o si el enchufe está dañado, en caso de que se haya derra-mado líquido o han caído objetos en el aparato, el aparato ha estado expuesto a la lluvia o la humedad, no funciona normalmente o se ha dejado caer.
Precauciones
14) No cubra las aberturas de ventilación con objetos tales como periódicos, manteles, cortinas, etc.
15) No se deben colocar en el aparato fuentes de calor, como velas encendidas.
16) Se debe prestar atención a los aspectos ambientales cuando deseche las baterías.
17) El aparato no debe ser expuesto a goteos o salpicaduras y ningún objeto lleno de líquido, tales como jarrones, debe ser colocado sobre el decodificador.
PartesPanel frontal
Panel lateral
Panel trasero
USB JACK: Se utiliza para conectaruna memoria USB.
SENSOR DE CONTROL REMOTO: Se utiliza para recibir la señal del mando a distancia.
LED DISPLAY: Se utiliza para mostrar la información del canal.
CH - : Selecciona el canal anterior.
CH + : Selecciona el siguiente canal. .
V - : Bajar volumen.
V + : Subir volumen.
PANEL TRASERO ANT IN: Se utiliza para conectar la antena para recibir la señal.
LOOP OUT: Se utiliza para conectar el puerto 'ANT IN' de otra unidad
VIDEO: Este centro emite una señal de vídeo compuesto.
AUDIO L / R: Este enchufe emite una señal analógica de audio D / I.
COAXIAL: Utilice para conectar un sistema de sonido envolvente.
DC IN: Se utiliza para conectar el adaptador de 5V DC
ANT IN LOOP OUT HD OUT VIDEO AUDIO -R AUDIO-L DC -IN
Control remoto
1) STANDBY: Encender o apagar.2) INFO: Muestra información adicional del canal.3) EPG: (Electronic Program Guide) Activa la guía de programas.4) AUDIO: selecciona el idioma y el modo de audio5) MENU: Activa el menú principal.6) IZQUIERDA: Navega por los menús. Aumenta el volumen.7) OK: Confirma una entrada o selección. Muestra la lista de canales.8) FAVORITE: Activa el Menú Favorito.9) 0-9 (Botones numéricos): Selecciona un canal o ajuste.10) FWD: Busca hacia adelante durante la reproducción de archivos.11) REV: Busca hacia atrás durante la reproducción de archivos12) PAUSE: Interrumpe la reproducción de medios.13) PLAY: Inicia o reanuda la reproducción de medios14) BOTONES CON FUNCIÓN:ROJO: sin función; VERDE: Cambia resolución;AMARILLO: cambia la relación de aspecto; AZUL: ajuste del temporizador;15) MUTE: silencia o restaura la salida de audio.16) CC: Subtítulo17) PVR: teclas de acceso directo para PVR.18) SUBTITLE: Selecciona el idioma de subtítulos.19) RECALL: Se utiliza para cambiar entre los últimos dos canales vistos.20) ARRIBA: Navega a través de los menús. Selecciona el siguiente canal.21) DERECHA: Navega por los menús. Disminuye el volumen.22) EXIT: Sale del menú actual o regresa al menú anterior.23) MEDIA: teclas de acceso directo para entrar en Multi-Media.24) GOTO: Se utiliza para seleccionar la hora que desea reproducir.25) PREV: Salta a la pista anterior durante la reproducción del material.26) NEXT: Salta a la pista siguiente durante la reproducción de archivos.27) STOP: Detiene la reproducción de archivos.28) REC: Se utiliza para grabar un programa.
Control remoto
!
STANDBY
EPG INFO CC
PVR
AUDIO SUBTITLE
MENU
VOL-
FAVOURITE
1 2 3
4 5 6
7 8 9 0
CH -
RECALL
CH +
VOL+OK
EXIT
MEDIA
GOTO
REV FWD PREV NEXT
PLAY PAUSE STOP
MUTE
15
1617
18
1920
21
22
23
24
25262728
21
3
4
5
6
78
9
1011
1213
14
Instalación
2. Apunte el control remoto al frente del receptor. El control tiene un rango de 7 metros en un ángulo de 60°.
Comenzando a usar
ConexionesPrecaución: Asegúrese de comprobar que la especificación de voltaje de la toma de pared es la misma con el receptor. Para evitar riesgo de descarga eléctrica, no abra la cubierta ni la parte posterior del receptor.
Nota: Cuando conecte el receptor a otro equipo, por ejemplo, TV, VCR y amplifica-dor, asegúrese de consultar el manual del usuario correspondiente para su instalación. Además, asegúrese de desconectar todos los equipos de la red eléctrica antes de la conexión.
Utilizando el control remoto
1. Abra el compartimento de baterías, coloque 2 baterías AAA, poniendo atención a la polaridad. Vuelva a colocar la tapa del compartimento de baterías.
Instalación
Una vez que todas las conexiones se hayan realizado correctamente, encienda el televisor y asegúrese de que el receptor está conectado a la alimentación principal. Presione el botón de encendido para encender el receptor. Si está utilizando el receptor por primera vez o restaurado a los valores predeterminados de fábrica, el Menú principal aparecerá en la pantalla del televisor.(1) Seleccione [búsqueda de canal] y pulse la tecla DERECHA / IZQUIERDA para seleccionar un idioma.(2) Una vez que la sintonización del canal esté completa, ya está listo para ver programas de televisión.
Configuración de vídeoPara acceder al Menú, pulse MENU y luego seleccione [Imagen]. El menú propor-ciona opciones para ajustar la configuración de vídeo. Pulse ARRIBA / ABAJO para seleccionar una opción y pulse DERECHA / IZQUIERDA para ajustar esa configura-ción. Pulse EXIT para salir del menú.
Relación de aspectoDebe establecer el formato de visualización en 4: 3 Pan Scan, 4: 3 Letter Box, 16: 9 Wide Screen o Auto para obtener la máxima visualización cuando vea la televisión.
ResoluciónSi el video no aparece correctamente, cambie el ajuste. Esta configuración es para que coincida con la configuración más común para DV-OUT. [480i]; para el sistema NTSC TV. [480P]; para el sistema NTSC TV. [576i]; para el sistema PAL TV. [576P]: para el sistema PAL TV. [720P]; para sistemas NTSC TV. [1080I].
Formato de TVSi el video no aparece correctamente, debe cambiar los ajustes. Esto debería coincidir con la configuración más común para los televisores de su país. [NTSC]: para el sistema NTSC TV. [PAL]: para el sistema PAL TV; [Auto]
!
Configuración de la horaPara acceder al Menú, presione MENU y luego seleccione [Hora]. El menú proporciona opciones para ajustar la configuración de la hora. Pulse UP / DOWN para seleccionar una opción y pulse DERECHA / IZQUIERDA para ajustar los ajustes. Pulse EXIT para salir del menú.(1) Hora Automática: Actualiza la hora de manera automática(2) País Región: Muestra el huso horario correspondiente al país(3) Zona horaria: Seleccionla zona horaria.(4) Hora del día: Encendido o apagado de la hora del día.Horario de verano: activación o desactivación
OpciónPara acceder al Menú, pulse MENU y seleccione [Opción]. El menú ofrece opciones para ajustar el idioma OSD, el idioma de subtítulos y el idioma de audio. Seleccione una opción y pulse DERECHA / IZQUIERDA para ajustar . Pulse EXIT para salir del menú.(1) Idioma OSD: Seleccione un idioma OSD.(2) Idioma de subtítulos: Seleccione el idioma de subtítulos preferido.Idioma de audio: seleccione el idioma de audio preferido para ver los canales de TV. Si el idioma no está disponible, se utilizará el idioma predeterminado del programa.
SistemaPara acceder al menú, pulse MENU y seleccione [Sistema]. El menú ofrece opciones para ajustar parámetros del sistema. Pulse la tecla ARRIBA / ABAJO para seleccio-nar una opción y pulse DERECHA / IZQUIERDA para hacer el ajuste. Pulse EXIT para salir del menú.
Guía para padres Utilice esta opción para controlar el tipo de programas que ven los niños.
Configuración de claveEstablezca o cambie la contraseña de los programas bloqueados. Introduzca su contraseña anterior o la contraseña predeterminada '000000'. A continuación, se le pedirá que introduzca su nueva contraseña. Para confirmar vuelva a ingresar su nueva contraseña. Una vez confirmado, pulse EXIT para salir del menú.
!
Restaurar valores predeterminado de fábricaRestablezca su equipo a la configuración predeterminada de fábrica. En el menú principal, seleccione [Restaurar valores predeterminados de fábrica] y pulse OK o DERECHA para seleccionar. Introduzca su contraseña o la contraseña predetermi-nada '000000' y pulse OK para confirmar. Esta opción eliminará todos los canales y ajustes preestablecidos.
InformaciónVea la información del modelo, hardware y software.
Actualización de softwareUtilice para actualizar la versión de firmware
USBPara acceder al Menú, presione el botón MENU y seleccione [USB]. El menú ofrece opciones para reproducir archivos de música y fotos, admite archivos MP3, WMA, JPEG, BMP, la unidad sólo admite memorias USB con sistema de archivos FAT y FAT32.
Problema
Sin imagen
Pantalla muestraSin señal
No hay sonido
Sólo sonido,No hay imagen en lapantalla
No funciona el controlremoto
La imagen se detienerepentinamente
Razones
No esta conectado a la corriente
Revise el botón de encendido
Ajustes incorrectos
Conexión incorrecta
revise el cable de audio
Revise que no presiono Mute
Pista de sonido incorrecta
Conexión incorrecta
del cable AV
La batería está agotada
El mando a distancia no está
colocado al frente del equipo o
está muy lejos
La señal es demasiado débil
Qué hacer
Conecte la alimentación
Encienda la alimentación
Configure el parámetro correcto
Conecte el cable de audio
correctamente
Quite la opción Mute
Pruebe con otra pista de sonido
Conectar el cable AV
correctamente
Presione la tecla <TV / RADIO>
para cambiar al modo de TV
Cambie por una batería nueva
Coloque el control remoto al
frente y más cerca del equipo
Fortalecer la señal
Problemas y soluciones
Alimentación: 5 V - - - 2AResolución: 480p / 720p / 1080i / 1080p en HDTV / 480i en SDTVImpedancia de entrada: 75 ohmsAncho de banda: 7 / 8 MHzTemperatura de operación: 0º - 40º C (+32º A 104º F )Humedad: 20% a 90% no condensadaTemp. de almacenamiento: -20º - 60º C (20º -140º F)
Señal de audio compatible con: MPEG - 1 (capa I Y II)Salida de audio estéreo: 1 Vpp + 10%
Señal de video compatible con: MPEG-2 MPEG-4Compuesto (CVBS): NTS, 480iNivel CVBS: 1Vpp + 10%HDMI: 480i / 720p / 1080i / 1080p
Control remoto Alimentación: 3 V - - - (2x AAA)
Adaptador de voltajeAlimentación: 100-240 V 50 /60 Hz 400 mASalida: 5 V - - - 2 A
Consumo nominal: 9, 190 WhConsumo en espera: 0, 238 Wh
Especificaciones
Póliza de garantía
Producto: Decodificador de TV digital terrestre para canales de alta definición HDTV y SDTVModelo: 208-900CRMarca: Steren
DATOS DEL DISTRIBUIDOR
Nombre del Distribuidor __________________________________
Domicilio ______________________________________________
Fecha de entrega _____________________________________
Esta póliza garantiza el producto por el término de un año en todas sus partes y mano de obra, contra cualquier defecto de fabricación, funcionamiento a partir de la fecha de entrega.CONDICIONES1.- Para hacer efectiva la garantía, presente esta póliza y el producto, en donde fue adquirido o en Electrónica Steren S.A. de C.V.2.- Electrónica Steren S.A de C.V. se compromete a reparar el producto en caso de estar defectuoso sin ningún cargo al consumidor. Los gastos de transportación serán cubiertos por el proveedor.3.- El tiempo de reparación en ningún caso será mayor a 30 días,contados a partir de la recepción del producto en cualquiera de los sitios donde pueda hacerse efectiva la garantía.4.- El lugar donde puede adquirir partes, componentes, consumibles y accesorios, así como hacer válida esta garantía es en cualquiera de las direcciones mencionadas posteriormente.
ESTA PÓLIZA NO SE HARÁ EFECTIVA EN LOS SIGUIENTES CASOS:1.- Cuando el producto ha sido utilizado en condiciones distintas a las normales.2.- Cuando el producto no ha sido operado de acuerdo con el instructivo de uso.3.- Cuando el producto ha sido alterado o reparado por personal no autorizado por Electrónica Steren S.A. de C.V. El consumidor podrá solicitar que se haga efectiva la garantía ante la propia casacomercial donde adquirió el producto. Si la presente garantía se extraviara, el consumidor puede recurrir a su proveedor para que le expida otra póliza, previa presentación de la nota de compra o factura respectiva.
ELECTRÓNICA STEREN S.A. DE C.V.Biólogo Maximino Martínez No. 3408, San Salvador Xochimanca, Del. Azcapotzalco,Ciudad de México, 02870, RFC: EST850628-K51STEREN PRODUCTO EMPACADO S.A. DE C.V.Autopista México- Qro. Km 26.5 S/N Nave 3-A Col. Lomas de Boulevares ,Tlalnepantla de Baz,Estado de México, México CP. 54020 RFC: SPE941215H4
En caso de que su producto presente alguna falla, acuda al centro de distribución más cercano a su
domicilio y en caso de tener alguna duda o pregunta por favor llame a nuestro Centro de Atención a
Clientes, en donde con gusto le atenderemos en todo lo relacionado con su producto Steren.
Centro de Atención a Clientes
01 800 500 9000
1
TDT SDTV / HDTV TUNER
208-900CR
V1.0 0117AInstruction manual
1) Please read these instructions before using this product.
2) Keep these instructions.
3) Respect all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with a dry cloth.
7) Do not block the ventilation openings, install them according to the instructions.
8) Do not install near heat sources such as radiations, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized plug. If the supplied plug does not fit into your outlet, consult an electrician to replace the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11) Only use attachments / accessories specified by the manufacturer.
12) Unplug this apparatus during lightning storms or when unused for long periods of time.
13) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power cord or plug is dam-aged, liquid has been spilled or objects have fallen into the apparatus, the appara-tus has been exposed to rain or moisture, does not operate Usually, or has been dropped.
Cautions
14) Ventilation should not be prevented by covering the ventilation openings with objects such as newspapers, tablecloths, curtains, etc.
15) No naked flame sources, such as lighted candles, should be placed on the apparatus.
16) The appliance should not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, should be placed in the appliance.
Parts
Front panel
Side panel
Back panel
USB JACK: Used to connect to an external USB 2.0 device.
REMOTE CONTROL SENSOR: Used to receive the signal from the remote control.
LED DISPLAY: Used to display the channel information.
CH -: Selects the previous channel. Without using the remote control.
CH +: Selects the next channel. Without using the remote control.
V -: Volume down. Without using the remote control.
V +: Volume up. Without using the remote control.
REAR PANELANT IN: Used to connect the antenna to receive the signal.
LOOP OUT: Used to connect the 'ANT IN' port of another unit
VIDEO: This center outputs a composite video signal.
AUDIO L / R: This jack outputs an analog L / R audio signal.
COAXIAL: This plug connects to a coaxial jack on your surround sound system.
DC IN: Used to connect the 5V DC adapter
ANT IN LOOP OUT HD OUT VIDEO AUDIO -R AUDIO-L DC -IN
Remote control
1) STANDBY: Turn the product on or off.2) INFO: Displays additional channel information.3) EPG: (Electronic Program Guide) Activates the program guide.4) AUDIO: selects the language and audio mode5) MENU: Activates the main menu.6) LEFT: Navigate the menus. Increase the volume.7) OK: Confirm an entry or selection. Displays the channel list.8) FAVORITE: Activates the Favorite Menu.9) 0-9 (Number buttons): Selects a channel or setting.10) FWD: Searches forward during media playback.11) REV: Searches backward during media playback.12) PAUSE: Interrupts media playback.13) PLAY: Starts or resumes playing media14) COLOR BUTTONS:RED: no function; GREEN: Switch resolution;YELLOW: change the aspect ratio; BLUE: timer setting;15) MUTE: Mutes or restores audio output.16) CC: Caption subtitle .17) PVR: The shortcut keys for entering PVR.18) SUBTITLE: Selects the subtitle language.19) RECALL: Used to switch between the last two channels viewed.20) UP: Navigate through the menus. Select the next channel.21) RIGHT: Navigates the menus. Decrease volume.22) EXIT: Exits the current menu or returns to the previous menu.23) MEDIA: The hotkeys to enter Multi-Media.24) GOTO: Use to select the time you want to play.25) PREV: Jumps to the previous track during playback of the material.26) NEXT: Skips to the next track during media playback.27) STOP: Stops media play.28) REC: Used to record the program.
Remote control
!
STANDBY
EPG INFO CC
PVR
AUDIO SUBTITLE
MENU
VOL-
FAVOURITE
1 2 3
4 5 6
7 8 9 0
CH -
RECALL
CH +
VOL+OK
EXIT
GOTO
REV FWD PREV NEXT
PLAY PAUSE STOP
MUTE
15
1617
18
1920
21
22
23
24
25262728
21
3
4
5
6
78
9
1011
1213
14
Installation
2. Point the remote control at the front of the receiver. The control has a range of 7 meters at an angle of 60 °.
Getting Started
ConnectionsCaution: Be sure to check that the voltage specification of the wall outlet is the same with the receiver. To avoid the risk of electric shock, do not open the cover or the back of the receiver.
Note: When connecting the receiver to other equipment, eg TV, VCR and amplifier, be sure to consult the corresponding user manual for instructions. Also, be sure to disconnect all equipment from the mains before connecting.
Using the remote control
1. Open the battery compartment, insert 2 AAA batteries, paying attention to the polarity. Replace the battery cover.
Installation
Once all connections have been made correct-ly, turn on the TV and make sure that the receiver is connected to the main power. Press the power button to turn on the receiver. If you are using the receiver for the first time or restored to the factory default settings, the Main Menu appears on the TV screen.(1) Select [ channel search ] and press the RIGHT / LEFT key to select a language.(2) Once the channel tuning is complete, you are ready to watch TV.
Video SettingsTo access the Menu, press MENU and then select [ Image ]. The menu provides options for adjusting the video settings. Press UP / DOWN to select an option and press RIGHT / LEFT to adjust that setting. Press EXIT to exit the menu.
Aspect ratioYou must set the display format to 4: 3 Pan Scan, 4: 3 Letter Box, 16: 9 Wide Screen or Auto for maximum viewing when watching TV.
ResolutionIf the video does not appear correctly, change the setting. This setting is to match the most common DV-OUT setting. [480i]: for the NTSC TV system. [480P]: for the NTSC TV system. [576i] for the PAL TV system. [576P]: for the PAL TV system. [720P]: for NTSC or PAL TV systems. [1080I]: for NTSC systemso PAL TV.
TV formatIf the video does not appear correctly, you must change the settings. This should match the most common settings for TVs in your country. [NTSC]: for the NTSC TV system. [PAL]: for the PAL TV system; [Auto]: adjusts the TV format according to the flow automatically
!
Setting the timeTo access the Menu, press MENU and then select [Time]. The menu provides options for adjusting the time settings. Press UP / DOWN to select an option and press RIGHT / LEFT to adjust the settings. Press EXIT to exit the menu.(1) Auto Time: update time with flow time, or NO.(2) Country Region: Display the time zone corresponding to the country(3) Time zone: Select the time zone offset.(4) Time of day: On or off daylight time.
OptionTo access the Menu, press MENU and select [Option]. The menu offers options for adjusting the OSD language, subtitle language and audio language. Select an option and press RIGHT / LEFT to adjust the setting. Press EXIT to exit the menu.(1) OSD Language: Select an OSD language.(2) Subtitle language: Select the preferred subtitle language.Audio language: Select the preferred audio language to watch TV channels. If the language is not available, the default language of the program will be used.
SystemTo access the menu, press MENU and select [System]. The menu offers options for adjusting system settings. Press the UP / DOWN key to select an option and press RIGHT / LEFT to adjust the setting. Press EXIT to exit the menu.
Parent GuideThe parental lock, which is used to control children who watch television, is not suitable.
Key SettingsSet or change the password for locked programs. Enter your old password or the default password '000000'. You will then be prompted to enter your new pass-word. To confirm, re-enter your new password. Once confirmed, press EXIT to exit the menu.
!
Restore factory defaultReset your Set Top Box to the factory default settings. In the main menu, select [Restore Factory Defaults] and press OK or RIGHT to select. Enter your password or the default password '000000' and press OK to confirm. This option will delete all channels and presets.
InformationView model, hardware, and software information.
Software updateSelect to start the software update if USB is connecting and there is an update file.
USBTo access the Menu, press the MENU button and select [USB]. The menu offers options to play music files and photos, can support MP3, WMA, JPEG, BMP files, the unit only supports USB device with FAT and FAT32 file system. It will not support the NTFS file system.
TroubleshootingProblem
Without image
Display ScreenNo signal
No sound fromSpeaker
Only sound,There is no picture in the screen
Remote controlUnit is not viable
The image stopsSuddenly the mosaic
Potential Reasons
Power is not connected
Ignition switch is not lit
Incorrect setting
Incorrect connection
check audio cable
Mute the sound
Incorrect soundtrack
Incorrect connection
of AV cable
Battery is exhausted
The remote control is not
In the opposite right of the
Front panel or too far from it
The signal is too weak
What to do
Turn on power
Turn on the power
Connect the ISDB-T cable
Set the correct parameter
Connect the audio cable
correctly
Turn on the volume control
Try another sound track
Connect the AV cable
correctly
Replace the new battery
Adjust how you maintain
Remote control unit and
Near the panel
Strengthen the signal
Troubleshooting
Input: 5 V - - - 2AResolution: 480p / 720p / 1080i / 1080p @ HDTV / 480i @ SDTVInput impedance: 75 ohmsBandwidht: 6 / 7 / 8 MHzOperating temperature: 0º - 40º C (+32º A 104º F )Humidify: 20% a 90% non condensedStronge temperature: -20º - 60º C (20º -140º F)
Audio signal: MPEG - 1 (layer I and II)Stereo audio output: 1 Vpp + 10%
Video signal: MPEG-4CVBS level: 1Vpp + 10%HDMI: 480i / 720p / 1080i / 1080p
Remote control Input: 3 V - - - (2x AAA)
AC / DC converter Input: 100-240 V 50 /60 Hz 0,5 AOutput: 5 V - - - 2 A
Nominal consumption: 9. 190 WhStand-by power consumption: 0. 238 Wh
Specifications
This Steren product is warranted under normal usage against defects in workmanship and materials to the original purchaser for one year from the date of purchase.
CONDITIONS1. This warranty card with all the required information, invoice or purchase ticket, product box orpackage, and product, must be presented when warranty service is required.2. If the product is in the warranty time, the company will repair it free of charge.3. The repairing time will not exceed 30 natural days, from the day the claim was received.4. Steren sell parts, components, consumables and accessories to customer, as well as warrantyservice, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow enclosed instructions, improper repair by unauthorizedpersonnel, improper safe keeping, among others.a) The consumer can also claim the warranty service in the purchase establishment.b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
RETAILER INFORMATIONName of the retailer ____________________________________Address _____________________________________________Product ______________________________________________Brand _______________________________________________Serial number _________________________________________Date of delivery _______________________________________
Product: TDT SDTV / HDTV TUNERNumber part: 208-900CRBrand: Steren
Warranty
Product: TDT SDTV / HDTV TUNERNumber part: 208-900CRBrand: Steren
Top Related