7/23/2019 manufactura convencional
http://slidepdf.com/reader/full/manufactura-convencional 1/22
TEAM: CARDOZO AVALOS LUIS DON
JAIME ALBERTO GARES FRANCISCO JAVIER MONZON AGUILAR DIANA PA POMPA GOMEZ MARIA GUAD ZAMORA GOMEZ OSCAR ART
LINE SEQUENCE SYSTEM
7/23/2019 manufactura convencional
http://slidepdf.com/reader/full/manufactura-convencional 2/22
There are in general four productionprocesses:
Intermittent production
Batches production
Line production
Continuous production
7/23/2019 manufactura convencional
http://slidepdf.com/reader/full/manufactura-convencional 3/22
INTERMITTENT PRODUCTION
This system creates the sufficient flexibil
kinds of products or services in significat
personalization is relatively high and the
particularly product or service is low.
The specific needs of the next client are unknown and the
frequency of the request is not predictable. Each new request
is managed as an independent unit. This intermittent
production process includes mainly the use of and flexible flow
strategy.
Examples:• Production of a metal
casting• Medical care in
emergency room
7/23/2019 manufactura convencional
http://slidepdf.com/reader/full/manufactura-convencional 4/22
BATCHES PROCESS
This process is distinguished of an intermittent by their volume, variety and quality characteris
difference is that the volumes are higher than the same products and services, another differen
provides a tighter variety of products and services. It is processed a batch of a products or clien
the production is adjusted to the next one.
Examples:• Air travel• Manufacture of paints
7/23/2019 manufactura convencional
http://slidepdf.com/reader/full/manufactura-convencional 5/22
LINE PROCESS
This process is localized between the batch, and continuous processes, it volumes are bid, the
correspondent products and services are standardized, this allows us to organize the resource
product or service, the material advances in a lineal way from one operation to the next with
sequence, there is a little inventory between one operation and another.
Exam• ca• To• a
7/23/2019 manufactura convencional
http://slidepdf.com/reader/full/manufactura-convencional 6/22
CONTINUOUS PROCESS
A continuous process represents the final corner of the
standardized production, with big volume and rigid linear
flows. Frequently, the process is intensive in capital and it´s not
interrupted in the 24 hours of the day, with the purpose of
maximize the equipment use and avoid the expensive stops
and new starts.
The continuous processes are uses almost
manufacturing purposes and fits perfectly
strategy.
Examples:• Chemicals• Oil refineries• Producing beer
7/23/2019 manufactura convencional
http://slidepdf.com/reader/full/manufactura-convencional 7/22
GROUPS TECHNOLOGY SYSTEM
7/23/2019 manufactura convencional
http://slidepdf.com/reader/full/manufactura-convencional 8/22
This is a manufacturing technique in which functionally-group machines(producing parts or products with similar characteristics) are organizedinto cells to achieve high repeatability levels.
WHAT DOES THIS PHILOSOPHY SAY?
This philosophy is about looking for theadvantages of the large production series formake it better in medium or small series…
7/23/2019 manufactura convencional
http://slidepdf.com/reader/full/manufactura-convencional 9/22
FAMILIES OF PARTS:
It is a collection of pieces that are similar, either because of its geometrishape and size or because the steps required for manufacturing arsimilar.
How can we create families of parts?
1.- From the point of view of manufacture.
2.- From the point of view of design.
7/23/2019 manufactura convencional
http://slidepdf.com/reader/full/manufactura-convencional 10/22
CLASSIFICATION
1.- From the point of view of manufacture.
Defined by:
- In terms of functiand overall shap
of the part.- A level design
details.
7/23/2019 manufactura convencional
http://slidepdf.com/reader/full/manufactura-convencional 11/22
2.- From the point of view of design.
The advantages obtained are less movement of the work in progress,shorter assembly times and lower manufacturing times….
CLASSIFICATION
Define
- A leveloverall - A partial
leve- A level
opera
7/23/2019 manufactura convencional
http://slidepdf.com/reader/full/manufactura-convencional 12/22
What about the results?
Here you can see theproductions.In the figure aboveproduct have different w
however that’s not theway to group families…In the figure below wesee the best form to agthe familes by desing.
7/23/2019 manufactura convencional
http://slidepdf.com/reader/full/manufactura-convencional 13/22
EXAMPLE:
Similar parts are arranged in families of parts. For example a planproducing 10,000 different pieces may be able to group the great majoritof these 50 or 60 pieces in different families. Each family would havcharacteristics similar design and manufacture. Therefore the productioof each member of a family will be similar, which can be used to improvthe efficiency of the manufacturing process of that family. Benefits can bgained by grouping the cells in groups or machines to facilitate workflowAlso in the process of design advantages can be obtained with thgrouping into families, thanks to the classification and codification of parts
7/23/2019 manufactura convencional
http://slidepdf.com/reader/full/manufactura-convencional 14/22
This method, developed by Professor Burbidge, can form parand machine groups that these families must be m
simultaneously. The information base for the formation oconstitute the roadmaps in the list of machines requiredmanufacture of parts appears collection
The training method based on the analysis of the process ctwo stages:
A) The flow analysis involves analyzing the industry, simplify anthe flow of parts through large sections of forging, machining, treatments, etc. Starting from this initial flow is aand simplified by meeting facilities compatible or
modification to minimize the flow of parts.
PROCESS ANALYSIS
7/23/2019 manufactura convencional
http://slidepdf.com/reader/full/manufactura-convencional 15/22
B) The group analysis is carried out within each of tlarge sections considered in the previous stage. The aof this analysis is to divide the pieces into families adivide the equipment in each section machines grouso that each family parts are fully processed by oone group.
7/23/2019 manufactura convencional
http://slidepdf.com/reader/full/manufactura-convencional 16/22
CODING
It can be defined as the attribution of a symbol to each ccharacteristic of an element so that this symbol contains inforabout the nature or kind of characteristic considered. The main bare: allows quick recovery process designs, facilitates the formapart families and machine cells facilitates precise machinrequirements estimation, allows better utilization of machines, too
labor helps the production planning, among others.
Can be of two types, based on their structure:
1. Systems of hierarchical structure. In these systems the interpretaeach symbol depends on the value of the preceding symbol.
2. Systems string type structure. Such codes in the interpretation osymbol in the sequence is fixed. Not depend on the value of the p
symbol.
7/23/2019 manufactura convencional
http://slidepdf.com/reader/full/manufactura-convencional 17/22
SCOPE OF EACH METHOD FOR FORMATIONOF FAMILIES
Direct formation of part families. The direct formation from inspeadequate when it comes to incorporating technology group at tlevel, or when a situation volume/variety high relationship exisituation occurs frequently in the case of manufacturing theproducts and relatively simple
Analysis of the process. It is the best method of forming families o
to the second level. It is the only method which leads directlyformation of part families and machine groups.
Family formation through coding. The previous coding provides sofor the application of group technology to the third level, particuthe reduction of variety in design and internal standardization.
7/23/2019 manufactura convencional
http://slidepdf.com/reader/full/manufactura-convencional 18/22
Is carried out at three levels: machine level, group level, and enterprislevel set
A machine level. Machining consists of families that can be machined on single machine, and with the same tooling. with similar processes. It considered that the worker process the most complex piece includes a
necessary operations for other components
APPLICATION OF TECHNOLOGY GROUP
7/23/2019 manufactura convencional
http://slidepdf.com/reader/full/manufactura-convencional 19/22
Implementation of technology group
Conditions for implementing
Work in small series
Sufficient number of parts
Parts with a certain degree of similar.
Sufficient number of machines
Accurate production information
Minimum internal inspections
7/23/2019 manufactura convencional
http://slidepdf.com/reader/full/manufactura-convencional 20/22
Implementation of technology group
Implementation phase:
Preparatory phase
• Periodic parts volume by
types and operations• Existence of sufficiently
detailed series
• Exact knowledge of themachinery park.
Development phase ofmedia
• Machinery
• Tools
• Operators
• Composition of groups
Exploitation
• Creation of file
• Information an
7/23/2019 manufactura convencional
http://slidepdf.com/reader/full/manufactura-convencional 21/22
Benefits of technology groups
Design: use of a classification and coding system
Work preparation: it tends to promote standardization in the phasesof manufacture, including the preparation of tools and assemblies.
Movement of materials: reduction of movements.
Production and inventory control The process plan
Employee satisfaction
7/23/2019 manufactura convencional
http://slidepdf.com/reader/full/manufactura-convencional 22/22
Top Related