Post on 24-Jul-2022
2
COM-437
Gracias por la compra de este producto Steren.
Este manual contiene todas las indicaciones necesarias para manejar su nueva Capturadora de video USB de 4 canales.
Por favor, revíselo completamente para estar seguro de cómo utilizar apropiadamente el producto.
Para apoyo, compras y todo lo nuevo que tiene Steren, visite nuestro sitio web:
www.steren.com
Capturadora de video USB de 4 canales
La información que se muestra en este manual sirve únicamente como referencia sobre el producto. Debido a actualizaciones pueden existir diferencias.
Por favor, consulte nuestra página web (www.steren.com) para obtener la versión más reciente del instructivo.
3
1. CARACTERÍSTICAS• Visualización individual, simultánea y en secuencia de hasta cuatro cámaras.
• Grabación automática al detectar movimiento y mediante programación.
• Grabación individual y simultánea.
• Búsqueda rápida y avanzada de grabaciones.
• Control de la velocidad de reproducción.
• Captura de imágenes fijas.
2. REQUISITOS DEL SISTEMA • Procesador Intel Pentium 4/AMD a 1Ghz o superior.
• 128 Mb en RAM.
• Puerto USB disponible.
• Tarjeta de video (no se recomienda usar computadoras con tarjeta de video incluida
en la tarjeta madre).
• DirectX 9.0 o superior.
• Windows 2000 con SP4 o Windows XP con SP2 o superior.
4
3. CONTENIDO • 1 capturadora de video.
• 1 CD con utilidades y controladores.
• 1 manual de instrucciones.
4. CONTROLES1. Entradas de video compuesto para conectar hasta 4 cámaras con conectores RCA.
2. Conector USB para conectar la capturadora a la computadora.
5
5. INSTALACIÓN (Antes de conectar la capturadora debe instalar los controladores).
1.- Introduzca el disco de instalación en la unidad de CD-ROM.
2.- Ejecute el archivo SETUP.EXE, localizado en la carpeta “Driver” del CD de
instalación.
3.- Presione SIGUIENTE para comenzar con la instalación de los controladores y
FINALIZAR para concluir el proceso.
6
6. INSTALACIÓN DEL SOFTWARE
4.- Después de reiniciar la computadora, conecte la capturadora en un puerto USB. La computadora detectará la capturadora y se actualizarán los controladores. Enseguida estará lista para usarse.
5.- Para comprobar que el equipo se instaló correctamente, abra Panel de Control > Sistema > Hardware > Administrador de dispositivos y revise que el driver USB 2820 Device esté en la lista.
1.- Ejecute el archivo SETUP.EXE de la carpeta “AP Software”. Presione NEXT para comenzar la instalación y FINISH para concluir el proceso.
7
2.- Al final aparecerá un ícono de 4eyeGrab en el Escritorio:
7. CONEXIONES
PwrLnk
8
8. USAR LA CAPTURADORA POR PRIMERA VEZ 1.- Dé doble clic en el ícono de 4eyeGrab para que aparezca la siguiente pantalla:
- El rojo indica que una función se está ejecutando, el verde que puede ser ejecutada
y el blanco que en ese momento no se puede ejecutar.
- Para grabar seleccione una cámara en el panel RECORDER. El mensaje Recording
aparecerá debajo del nombre de la cámara y comenzará la grabación. Para detenerla
vuelva a dar clic en la cámara elegida.
9
9. FUNCIONES DISPLAY
Camera I - Camera IV
Muestra la imagen de cada una de las cámaras conectadas de forma individual.
Camera All
Muestra las imágenes de las cámaras conectadas de forma simultánea.
Sequence
Muestra las imágenes de las cámaras conectadas de forma secuencial (el tiempo de
la secuencia puede programarse en la opción Ajustes de cámara).
10
Si da clic derecho sobre la imagen de alguna cámara se desplegará este submenú:
Display Permite ver la imagen de una o todas las cámaras conectadas al mismo tiempo.
Recorder Permite grabar con una o todas las cámaras conectadas al mismo tiempo.
AboutMuestra la versión actual del software.
ExitCierra el programa de grabación.
Always on top Mantiene el programa en primer plano, encima de las demás aplicaciones.
11
La velocidad de los cuadros por segundo disminuye cuando se visualizan las 4 cámaras al mismo tiempo. Si requiere una grabación en tiempo real, se recomienda
utilizar solo una cámara en pantalla completa.
10. RECORDER (Grabación)
Camera I - Camera IV Permite grabar con cada una de las cámaras conectadas de forma individual.
Camera All Permite grabar con todas las cámaras conectadas de forma simultánea. (Las grabaciones se guardarán en 4 archivos diferentes).
12
Sequence Permite grabar la imagen de las cuatro cámaras en un sólo archivo.
Las grabaciones se guardan como YYMMDD_hhmmss.avi, donde YY = Año, MM = Mes, DD = Día, hh = hora, mm = minutos y ss = segundos.
FullScreen (Pantalla completa) Muestra un mosaico con las imágenes de las cuatro cámaras en pantalla completa. Para salir de este modo, dé doble clic en la pantalla.
SnapShot (Imagen fija)Captura una imagen fija de la (s) cámara (s) que esté (n) activa (s). Las imágenes se mostrarán en una ventana aparte. Al dar clic derecho sobre una se desplegará este submenú:
13
Save Guardar la imagen capturada en el disco duro.
Delete Borra la imagen capturada.
Preview Muestra la imagen capturada.
Print Imprime la imagen capturada.
Las imágenes se guardan como YYMMDD-hhmmss.avi , donde YY = Año, MM = Mes, DD = Día, hh = hora, mm = minutos y ss = segundos.
11. PLAYBACK (Reproducción)
14
Reproduce los archivos guardados.
Para localizar un archivo de grabación previamente guardado utilice la herramienta de búsqueda (Search option). Seleccione la cámara con la que hizo la grabación y presione Find. Se mostrará una lista con las grabaciones guardadas.
Si conoce la hora y fecha exactas de la grabación puede especificarlas en los recuadros. Si no está seguro puede determinar un periodo de tiempo más largo, con horas o días de inicio y término de la grabación.
12. CONTROLES DE REPRODUCCIÓN - Reproducir
Reproduce el archivo seleccionado.
- Pausa
Pausa la reproducción.
- Detener
Detiene la reproducción.
15
- Lento 1/2x, 1/3x, 1/4x
Disminuye la velocidad de reproducción.
- Rápido 2x, 3x, 4x
Incrementa la velocidad de reproducción.
- Regresar 1x, 2x, 3x, 4x
Regresa a un momento específico del video a diferentes velocidades (4x es
la más rápida).
- Imagen Fija Captura el cuadro actual del video que se está reproduciendo. Las imágenes se guardarán con el formato YYMMDD-hhmmss.avi.
- Información de archivo Muestra la duración y hora de inicio y final de la grabación.
16
- Búsqueda rápida Debe especificar la fecha de la grabación antes de presionar el botón de Búsqueda.
Presione para volver a la pantalla principal del programa.
13. MOTION DECT (Detección de movimiento)Activa la función de grabación automática al detectar movimiento. La cámara se detendrá después de 5 segundos sin que se registre movimiento.
14. CAMERA SETTING (Ajustes de cámara)
17
- SistemaNTSC o PAL
- B/W / ColorMuestra la imagen de las cámaras en blanco y negro o a color (en caso de que la cámara utilizada sea a color).
- Ajuste del tiempo de secuenciaControla el tiempo que transcurre entre la visualización de una y otra cámara en modo de secuencia.
- Ajuste de velocidad de la cámaraControla la velocidad de grabación (depende de la velocidad de su CPU y de la tarjeta de video).
4frames/s: imagen a 4 cuadros por segundo5frames/s: imagen a 5 cuadros por segundo6frames/s: imagen a 6 cuadros por segundo 7frames/s: imagen a 7 cuadros por segundo
- OSD Asigna un nombre a una cámara. Seleccione una e introduzca el nombre en el campo de la parte inferior.
- Ajustes de color Se puede ajustar el brillo, contraste, tinte, saturación y nitidez de todas las cámaras. Si presiona Default, se restablecerán los parámetros de fábrica. Presione OK para guardar los cambios o Cancel para anularlos.
18
Puede activar la función de grabación automática al detectar movimiento en una sola cámara o en las cuatro.
Detector Sense Mode (Sensibilidad de detección) Controla el nivel de sensibilidad para activar la grabación. Existen tres niveles: Low (Bajo), Middle (Medio) y High (Alto).
Detecting Action (Acción de detección) Selecciona la acción a realizar después de detectar movimiento. Puede elegir entre grabar (Record) o reproducir una alarma (Alarm). Presione OK para guardar los cambios o Cancel para anularlos.
15. MOTION DETECTOR SETTING (Ajustes del detector de movimiento)
19
En la opción Audio podrá elegir alguna cámara para que también grabe los sonidos. (Esta opción sólo está disponible para una cámara a la vez).
Time stamp (Impresión de la hora) Activa o desactiva la visualización de la hora durante la grabación.
Frame Rates (Velocidad de video) Controla la velocidad de cada una de las cámaras.
16. RECORD SETTING (Ajuste de grabación)
20
Record Dir And Mode (Modo de grabación)
La opción Linear graba de forma continua hasta que el disco duro solo tenga 30Mb de espacio libre. La opción Circular también graba de forma continua, pero comienza a regrabar desde el principio cuando el disco se llena.
También puede cambiar el lugar donde se almacenan las grabaciones presionando
Presione OK para guardar los cambios o Cancel para anularlos.
17. SCHEDULE RECORD SETTING (Grabación programada)
Puede programar una o las cuatro cámaras para comenzar a grabar en una fecha y hora específicas.
Time Set Elija la(s) cámara(s) e introduzca la fecha y hora de inicio, así como la fecha y hora de término. Presione OK para guardar los cambios o Cancel para anularlos.
21
18. PROBLEMAS Y SOLUCIONES PROBLEMA SOLUCIÓN
- Mi sistema no detecta el equipo
- Asegúrese de que el puerto USB sea 2.0.
- Si tiene Wndows XP, asegúrese de que tiene el
SP1 o uno superior.
- Cuando conecto el equipo aparece el mensaje
“Este equipo podría funcionar mejor en un puerto
de alta velocidad”
- Asegúrese de que el puerto USB sea 2.0.
- Pérdida de cuadros durante la captura de video
- Cierre todas las aplicaciones que no esté
usando y evite ejecutar otros programas durante
la grabación.
- Defragmente y libere espacio en su disco duro.
- Utilice un disco duro con más de 7200
revoluciones por minuto.
- El sistema se bloquea al comenzar la grabación
- Asegúrese de que tiene instalado DirectX 9.0.
- Actualice el controlador de su tarjeta de
video.
- Cierre todas las aplicaciones que no esté
usando y evite ejecutar otros programas durante
la grabación.
22
19. ESPECIFICACIONES
Cuadros por segundo:
Hasta 30 cuadros por segundo para NTSC
Hasta 25 cuadros por segundo para PAL
visualizando una sola cámara.
2-3 cuadros por segundo para las 4 entradas.
Máximos FPS en grabación: 30 cuadros por segundo (NTSC)
25 cuadros por segundo (PAL)
Mínimos FPS en grabación: 1 cuadro por segundo (NTSC y PAL)
Grabación de audio: Permitido sólo para una cámara
Entrada de video: 4 entradas análogas de video RCA
Sistema: NTSC y PAL
Captura de imagen fija: Formato JPG
Resolución de imagen fija: 640 x 480
Tamaño del archivo: 400MB por día
(en modo bajo a 1 cuadro por segundo)
Compresión tipo: MPEG-4
Entrada: 5V - - - por puerto USB
El diseño del producto y las especificaciones pueden cambiar sin previo aviso.
23
Producto: Capturadora de video USB de 4 canales Modelo: COM-437Marca: Steren
PÓLIZA DE GARANTÍAEsta póliza garantiza el producto por el término de un año en todas sus partes y mano de obra, contra cualquier defecto de fabricación y funcionamiento, a partir de la fecha de entrega.
CONDICIONES1.- Para hacer efectiva la garantía, presente esta póliza y el producto, en donde fue adquirido o en Electrónica Steren S.A. de C.V.2.- Electrónica Steren S.A de C.V. se compromete a reparar el producto en caso de estar defectuoso sin ningún cargo al consumidor. Los gastos de transportación serán cubiertos por el proveedor.3.- El tiempo de reparación en ningún caso será mayor a 30 días, contados a partir de la recepción del producto en cualquiera de los sitios donde pueda hacerse efectiva la garantía.4.- El lugar donde puede adquirir partes, componentes, consumibles y accesorios, así como hacer válida esta garantía es en cualquiera de las direcciones mencionadas posteriormente.
ESTA PÓLIZA NO SE HARÁ EFECTIVA EN LOS SIGUIENTES CASOS:1.- Cuando el producto ha sido utilizado en condiciones distintas a las normales.2.- Cuando el producto no ha sido operado de acuerdo con el instructivo de uso.3.- Cuando el producto ha sido alterado o reparado por personal no autorizado por Electrónica Steren S.A. de C.V.
El consumidor podrá solicitar que se haga efectiva la garantía ante la propia casa comercial donde adquirió el producto. Si la presente garantía se extraviara, el consumidor puede recurrir a su proveedor para que le expida otra póliza, previa presentación de la nota de compra o factura respectiva.
DATOS DEL DISTRIBUIDORNombre del Distribuidor __________________________Domicilio ______________________________________Producto ______________________________________Marca ________________________________________Modelo _______________________________________Número de serie ________________________________Fecha de entrega ________________________________
ELECTRÓNICA STEREN S.A. DE C.V.Camarones 112, Obrero Popular, 02840, México, D.F. RFC: EST850628-K51STEREN PRODUCTO EMPACADO S.A. DE C.V.Biólogo Maximino Martínez No. 3408 Int. 3 y 4, San Salvador Xochimanca, México, D.F. 02870, RFC: SPE941215H43ELECTRÓNICA STEREN DEL CENTRO, S.A. DE C.V.Rep. del Salvador 20 A y B, Centro, 06000, México. D.F. RFC: ESC9610259N4ELECTRÓNICA STEREN DE GUADALAJARA, S.A.López Cotilla No. 51, Centro, 44100, Guadalajara, Jal. RFC: ESG810511HT6ELECTRÓNICA STEREN DE MONTERREY, S.A.Colón 130 Pte., Centro, 64000, Monterrey, N.L. RFC: ESM830202MF8ELECTRÓNICA STEREN DE TIJUANA, S.A. de C.V.Calle 2a, Juárez 7636, Centro, 22000, Tijuana, B.C.N. RFC: EST980909NU5
En caso de que su producto presente alguna falla, acuda al centro de distribución más cercano a su domicilio y en caso de tener alguna duda o pregunta por favor llame a nuestro Centro de Atención a Clientes, en donde con gusto le atenderemos en todo lo relacionado con su producto Steren.
Centro de Atención a Clientes01 800 500 9000
22
Thank You on purchasing your new Steren product.
This manual includes all the feature operations and troubleshooting necessary to install and operate your new Steren´s USB 4 Channel video capture.
Please review this manual thoroughly to ensure proper installation and operation of this product. For support, shopping,
and everything new at Steren, visit our website:
www.steren.com
COM-437
USB 4 Channel video capture
The instructions of this manual are for reference about the product. There may be differences due to updates.
Please check our web site (www.steren.com) to obtain the latest version of the instruction manual.
33
1. HIGHLIGHTS • Display up to four cameras individually, simultaneously or in sequence.
• Automatic motion detection and programmable recording.
• Individual and simultaneous recording.
• Quick and advanced recording search.
• Playback speed control.
• Still image capture.
2. SYSTEM REQUIREMENTS • Processor Intel Pentium 4/AMD 1 GHz or higher.
• 128 Mb RAM.
• Available USB port.
• Video card (it is not recommended to use computers with graphics embedded
motherboard).
• DirectX 9.0 or higher.
• Windows 2000 with SP4 or Windows XP with SP2 or higher.
44
3. CONTENT • 1 video capture device.
• 1 CD with utilities and drivers.
• 1 instruction manual.
4. CONTROLS1. Composite video inputs to connect up to 4 cameras with RCA connectors.
2. USB connector to connect the capture to the computer.
55
5. INSTALLATION (Before you connect the capture you must install drivers).
1.- Insert the installation disk into the CD-ROM drive.
2.- Run the SETUPfile.EXE, located in the folder ‘’Driver’’ of the installation CD.
3.- Press NEXT to begin with the installation of the drivers and FINISH to complete
the process.
66
6. INSTALLING THE SOFTWARE
4.- The computer will detect the capture and updated drivers. Is immediately ready
for use.
5.- To verify that the team was installed correctly, open Control Panel > system >
Hardware > Device Manager and check that the USB 2820 driver Device is in the list.
1.- Run the file SETUP.EXE in the folder ‘’AP Software’’. Press NEXT to begin the
installation and FINISH to complete the process.
77
2.- At the end of the installation process there will be a 4eyeGrab icon on the desktop.
7. CONNECTIONS
PwrLnk
88
8. USING THE CAPTURE DEVICE FOR THE FIRST TIME1.- Double click on 4eyeGrab icon to bring up the following screen:
- The red color indicates that a function is running, the green means that can be
executed and white at that time could not be implemented.
- To record, select a camera in the RECORDER panel. The Recording message
will appear under the camera name and start recording. To stop it again click on the
chosen camera.
99
9. FUNCTIONS DISPLAY
I Camera - IV Camera
Displays the image of each of the connected cameras individually.
All Camera
It shows the images from all connected cameras simultaneously.
Sequence
Shows the images from the connected cameras sequentially (the sequence time can
be programmed in the camera settings option).
8. USING THE CAPTURE DEVICE FOR THE FIRST TIME
1010
If you right click on any camera image, this submenu will be displayed:
Display Display the image of one or all connected cameras at the same time.
Recorder It allows to record with one or all connected cameras at the same time.
AboutDisplays the current software version.
ExitCloses the recording program.
Always on top It maintains the program in the foreground, on top of other applications.
1111
The frames per second speed decreases when the 4 cameras are displayed at the same time. If you require a real time recording, we recommend using only a camera
in full screen.
10. RECORDER
I Camera - IV Camera It allows to record with each of the connected cameras individually.
All CameraIt allows to record all connected cameras simultaneously. (Recordings are saved in 4 different files).
1212
Sequence Allows to record the image of the four cameras in a single file.
The recordings are saved as YYMMDD_hhmmss.avi, where YY = year, MM = month, DD = day, hh = hour, mm = minute and ss = seconds.
FullScreen Displays a mosaic with the images of the four cameras in full screen. To exit this mode, double click on the screen.
SnapShot Captures a still image of the camera(s) that is (are) active. The images will be shown in a different window. This submenu will be displayed when there is a right click on any of them:
1313
Save Save the captured image on the hard disk.
Delete Delete the captured image.
Preview Displays the captured image.
Print Print the captured image.
The images are saved asYYMMDD hhmmss.AVI[ESSDC1] , where YY = year, MM = month, DD = day, hh = hour, mm = minute and ss = second.
11. PLAYBACK
1414
Play the saved files.
To locate a previously saved file use the search tool. Select the camera that made the
recording and press Find. A list with the saved recordings will be displayed.
If you know the time and date exacts of the recording you can specify them in the
boxes. If you are not sure you can determine a longer period, with hours or days of
beginning and end of the recording.
12. PLAYBACK CONTROLS - Play
Play the selected file.
- Pause
Pause the playback.
- Stop
Stops playback.
1515
- Slow 1/2x, 1/3x, 1/4x
Decreases the playback speed.
- Fast 2x, 3x, 4x
It increases the speed of reproduction.
- Return 1x, 2x, 3x, 4x
Return to a specific point in the video at different speeds (4 x is the fastest).
- Fixed image Capture the current image of the video that is being played. The images will be saved in the format YYMMDDhhmmss.AVI.
- File information Displays the duration and start time and end of the recording.
1616
- Quick search You must specify the recording date before pressing the search button.
Press to return to the program main screen.
13. DECT MOTION Activates the automatic motion detection recording function. The camera will stop recording after 5 seconds without register movement.
14. CAMERA SETTING
1717
- SystemNTSC or PAL
- B/W / ColorDisplays the image in black and white or color (in case that the used camera supports color recording).
- Time sequence adjustment Controls the time between displaying each camera in sequence mode.
- Camera speed settingControls the recording speed (depends on your CPU speed of and the video card).
4frames/s: image at 4 frames per second5frames/s: picture at 5 frames per second6frames/s: image at 6 frames per second 7frames/s: picture at 7 frames per second
- OSD Assign a name to a camera. Select one and enter the name in the field at the bottom.
- Color adjustments You can adjust the brightness, contrast, hue, saturation and sharpness of all cameras. If you click Default, the default settings will be restored. Click OK to save the changes or Cancel to cancel them.
1818
You can activate automatic recording function to detect movement in a single camera or four.
Alarm Sense Mode Controls the sensitivity level to activate recording. There are three levels: Low, Middle and High.
Detecting Action Select the action to perform after detecting movement. You can choose to record (Record) or play an alarm (Alarm). Click OK to save the changes or Cancel to not change.
15. MOTION DETECTOR SETTING
1919
In the Audio option, you can choose any camera that also record sounds. (This option only is available for a camera at the same time).
Time stamp Enable or disable the time display during the recording.
Frame Rates Control the speed of each of the cameras.
16. RECORD SETTING
2020
Record Dir And Mode
The option Linear records continuously until the hard drive only has 30 Mb of free space. The Circular option also recorded continuously, but begins to re-record from the beginning when the disk is full.
You can also change the place where are the recordings stored.
Click OK to save the changes or Cancel to cancel them.
17. SCHEDULE RECORD SETTING
You can schedule up to four cameras to start recording at a specific date and time.
Time Set Chooses the camera (s) and enter the date and start time, as well as the date and hour of term. Press OK to save the changes or Cancel to cancel them.
2121
18. TROUBLESHOOTING TROUBLE SOLUTION
- My system does not detect the device
- Make sure that the USB is 2.0.
- If you have Windows XP, make sure that you
have SP1 or higher
- When I connect the equipment appears the
message “this ddevice might work better in a high
speed port”
- Make sure that the USB is 2.0.
- Loss of pictures during video capture
- Close all the applications that you are not using
and avoid running other programs during the
recording.
- Defragment and free space on your hard drive.
- Use a hard disk with more than 7200
revolutions per minute.
- The system hangs at the beginning of the
recording
- Make sure you have DirectX 9.0 installed.
- Update your video card driver.
- Close all the applications that you are not using
and avoid running other programs during the
recording.
2222
19. SPECIFICATIONS
Frames per Second:
Up to 30 FPS for NTSC
Up to 25 FPS for PAL
viewing only one camera.
2-3 FPS for four cameras.
Maximum FPS during recording: 30 FPS (NTSC)
25 FPS (PAL)
Minimum FPS during recording: 1 FPS (NTSC y PAL)
Audio recording: Permitted for only one camera.
Video input: Four analog RCA inputs.
System: NTSC and PAL
Fixed image capture: JPG format
Fixed image resolution: 640 x 480
File size: 400MB per day
(in 1 FPS mode)
Compression: MPEG4
Input : 5V - - - through the USB port
Product design and specifications are subject to change, without notice.
2323
WARRANTY
This Steren product is warranted under normal usage against defects in workmanship and materials to the original purchaser for one year from the date of purchase.
CONDITIONS
1.- This warranty card with all the required information, invoice, product box or package, and product, must be presented when warranty service is required.2.- If the product stills on the warranty time, the company will repair it free of charge.3.- The repairing time will not exceed 30 natural days, from the day the claim was received.4.- Steren sell parts, components, consumables and accessories to customer, as well as warranty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow enclosed instructions, improper repair by unauthorized personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
RETAILER INFORMATIONName of the retailerAddressProductBrandPart numberSerial numberDate of delivery
Product: USB 4-Channel Video Capture Part number: COM-437Brand: Steren
In case your product fails or have questions, please
contact your nearest dealer. If you are in Mexico, please
give a call to our Call Center.
01 800 500 9000