Post on 01-Nov-2014
description
Principios de la fabricación digital
1
DeepyReproduce voz en tono grave
FastyReproduce voz rápidamente
ShrillyReproduce voz en tono muy agudo
PersonajesDimensiones: 10X10X10cm aproxMaterial: tela
GlovyGraba la la información y envía el mensaje a cualquiera de los
personajes
Glovy
Ma, no quiero comer verduras
Ma, no quiero comer verduras
Sensor que funciona por tacto
Sensor que funciona por tacto
Modelado, manufactura, diseño asistido por computadora
2
2D designInkscapeIllustratoroodrawQCADLayoutGIMPPhotoshop
3D designcad.pyBlenderHoudiniSketchupRhinoGrasshopperSolidWorksCatiaPro/ENGINEERAutoCADMayaInventorAlias3ds MaxI-DEAS NXAC3D
http://vimeo.com/7060791
http://www.youtube.com/watch?v=tjha9uPK07Y http://www.youtube.com/watch?v=3wEZp20-2Jc
La familia
Corte controlado por computadora
3
GX 24
Epilog 36EXT
IT the press-fit monster
1 2 3
5 6 7
9 10 11
13 14 15
4
8
12
http://www.youtube.com/watch?v=eBsCDuX4e_k http://www.youtube.com/watch?v=datRhynwEQY
Producción y diseño electrónico
4
Mecanizado controlado por computadora
5
Biggy
Programación
6
Molde 3D y vaciado
7
Desarrollo colaborativo técnico
8
Now, the software used is MODELA Player4 from Roland. Open the .stl file. As the numbers above show, FIRSTthe machine has to be selected. For that, click on FILE, Machine Selection, and choose MDX-20 in Model Nameand Printer Name, and OK.Then, for machining we will need two things: roughing and finishing. Roughing will take out all the material andit usually leaves a 0.1mm offset surface that feels like zig-zag or stairs, whereas finishing will directly go to theshape to take off those 0.1mm of excess and thanks to it, the surface will look and feel smoother.To begin with, we choose New Process and Roughing.
1 21
2
1 2
3 4
When selecting the process, the windows above will appear (I am ignoring the real first one, and the real second oneappears here as 1).In 1 (Cutting Area), you have to select what surface to machine. It could be All, but if it’s Partial you will control the redframe and move it with the arrow. In 2 (Tool), you choose the bit (I used 3mm square). In 3 (Path Type), I chosecontour lines down cut. In 4 (Cutting Parameters), you will have values given by the program. The ones I could changewere Cutting-in Amount to 1.4, and Path Interval to 1.7 (which should have been 1.5 or less). The noise might makeyou go crazy, but it will take less time to be ready.
Red frame
arrow
Escaner e impresión 3D
9
batería 9V
interruptor
LED
http://www.youtube.com/watch?v=XSrW-wAWZe4
Structured-Light-3D-Scanner (& Processing)
http://www.youtube.com/watch?v=8nTFjVm9sTQ
StratasysModelado por deposición de material fundido
Z CorporationSinterizado con aglutinante
http://www.youtube.com/watch?v=uAt2xD1L8dw http://www.youtube.com/watch?v=5r60DM1xK8c
Objet GeometriesImpresión por fotopolímero (UV)
PrometalImpresión 3D metálica
http://www.youtube.com/watch?v=LgPXY8ktbLE http://www.youtube.com/watch?v=20R9nItDmPY
http://www.youtube.com/watch?v=OAMgERhfo-A
Sensores, actuadores y displays
10
Interface y programación
11
http://vimeo.com/11457211 http://www.youtube.com/watch?v=yLHrLRpaRBM
Diseño de máquinas
12
http://www.youtube.com/watch?v=nlDpZl-QIAA
Proyectos finales
13
http://www.youtube.com/watch?v=jlYDhq1oZlM http://www.youtube.com/watch?v=sH8L6x8LqJg
Implicancias y aplicaciones de la fabricación digital
14
continuará…