Concepto de ad Un Alcance

download Concepto de ad Un Alcance

of 6

Transcript of Concepto de ad Un Alcance

  • 8/2/2019 Concepto de ad Un Alcance

    1/6

    PERFORACION Y VOLADURA I

    Ao de la Consolidacin Econmica y Social del Per

    FACULTAD DE INGENIERA DE MINAS

    NDICE VOLABILIDAD

    CTEDRA : PERFORACIN Y VOLADURA I

    CATEDRTICO : Mg. AMES LARA, VICTOR

    INTEGRANTES : SANTANA ORELLANA, LEONARD

    VILCHEZ ORIHUELA, JOSE

    SEMESTRE : VII

    HUANCAYO PERHUANCAYO PER

    20102010

    CONCEPTO DE VOLABILIDAD UN ALCANCE

    FACULTAD DE INGENIERIA DE MINAS UNIVERSIDAD NACIONAL DELCENTRO DEL PERU

  • 8/2/2019 Concepto de ad Un Alcance

    2/6

    PERFORACION Y VOLADURA I

    El principal objetivo de la voladura es conseguir el factor ptimo del

    explosivo cual puede estar definido como el factor del explosivo

    requerido para la ptima fragmentacin, lanzamiento, vibracin del

    suelo, etc. Para una voladura especifica con condiciones de minimizar

    el costo total del minado. Actualmente el factor del explosivo esestablecido atreves de pruebas de voladura sin embargo el factor de

    explosivo puede ser aproximado utilizndose rocas, diseos y

    parmetros de explosivo. El termino volabilidad es usado e indicado la

    sensibilidad del macizo rocoso ala voladura y esta relacionado

    estrechamente con el factor de explosivo. Este presente trabajo a

    revisado algunos de los importantes estudios hechos en la volabilidad y

    determinacin del factor de explosivo usando rocas y parmetros

    INTRODUCCION:

    El macizo rocoso consta de varios diferentes tipos de rocas afectadopor diferentes grados de fracturacin en nfasis de varias condiciones.El numero de clasificaciones del macizo rocoso siendo desarrollado porla geotecnia propsitos como Rock Quality Designation (RQD; Deere etal 1963), Q-Index (NGIQ; Barton et al 1974), Rock Mass Rating (RMR;Bieniawski et al 1974), etc. En el contexto de perforacin y voladura,estas clasificaciones del macizo rocoso son principalmente tiles paraevaluar una efectiva perforacin pero no son muy utilizadas endefiniciones de volabilidad en rocas y en el macizo rocoso. Volabilidadpuede ser definida como caractersticas de la voladura en el macizo

    rocoso sujeto a un diseo especfico de voladura, caractersticas delexplosivo y legislaciones especficas de restricciones dependiendo dellugar especfico. En otras palabras la volabilidad te indica como volarfcil el macizo rocoso bajo condiciones especficas. La determinacinde la volabilidad en varias aproximaciones est siendo hecha pordiferentes investigaciones y revisados en el mismo, estos estn siendoapuntados en estos papeles.

    VOLABILIDAD DIFERENTES APROXIMACIONES:

    Varias aproximaciones estn siendo usados para la estimacin de lavolabilidad, mientras algunas pruebas de investigaciones correlacionande estas con datos disponibles de laboratorio y pruebas de losparmetros de roca del campo, algunas otras tienen relacin con estasrocas y parmetros de diseo de voladura y aun algunas otras tienenpruebas de estimar la volabilidad pensando en aproximacionesbasadas en la velocidad de perforacin y la representaciones deexplosivo en el campo. Un ltimo avance tenemos en mtodoscomputarizados, tambin abriendo nuevas vistas de las investigacionesde varios usos artificiales de la inteligencia algortmica para ladeterminacin de la volabilidad.

    FACULTAD DE INGENIERIA DE MINAS UNIVERSIDAD NACIONAL DELCENTRO DEL PERU

  • 8/2/2019 Concepto de ad Un Alcance

    3/6

    PERFORACION Y VOLADURA I

    BORQUEZ (1981)

    Determino el factor de volabilidad (Kv) de la ecuacin de PERCE para elclculo del burden usando el ndice del RQD corregido por uncoeficiente de alteracin. Este tiene en cuenta la resistencia de lasdiscontinuidades. En funcin de la apertura de estas y el tipo derelleno. La tabla N 1 el factor de correccin con respecto alasresistencia de las discontinuidades. La tabla N 2 la calidad de la rocaRQD. Figura N1 muestra el factor de volabilidad de BORQUEZ conrespecto al corregido RQD o equivalent rock quality designation (ERQD)

    RESISTENCIA DE LASDISCONTINUIDADES

    FACTOR DE CORRECCION(Fc)

    ALTA 1,0MEDIA 0,9BAJA 0,8

    MUY BAJA 0,7

    TABLA N1 factor de correccin con respecto alas resistencia de lasdiscontinuidades

    CALIDAD DE LA ROCA RQDMUY MALA 0 - 25

    MALA 25 - 50MEDIA 50 - 75BUENA 75 - 90

    MUY BUENA 90 - 100

    FACULTAD DE INGENIERIA DE MINAS UNIVERSIDAD NACIONAL DELCENTRO DEL PERU

  • 8/2/2019 Concepto de ad Un Alcance

    4/6

    PERFORACION Y VOLADURA I

    FACTOR DE VOLABILIDAD DE BORQUEZ

    0

    0.2

    0.4

    0.6

    0.8

    1

    1.2

    1.4

    1.6

    0 20 40 60 80 100 120

    Series1

    0

    0.2

    0.4

    0.6

    0.8

    1

    1.2

    1.4

    1.6

    0 20 40 60 80 100 120 140

    FACTORDEVOLABILIDAD(Kv)

    DESIGNACION DE LA CALIDAD DE LA ROCA EQUIVALENTE RQDE(%)

    RQDE=RDE XFACTORDECORRECCION

    Kv=1,96-0,27*ln(RQDE)

    Series1

    FIGURA N1

    DONDE:

    Kv : factor de volabilidadERQD: RQD corregido

    DONDE:

    RQD : ndice de calidad de rocaFc : factor de correccin segn BORQUEZ

    PIERCEEl diseo de malla y perforacin y voladura de rocas para los tajos estabasado en la teora de PIERCE (1955):

    DONDE:

    FACULTAD DE INGENIERIA DE MINAS UNIVERSIDAD NACIONAL DELCENTRO DEL PERU

    http://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsxhttp://var/www/apps/conversion/current/tmp/scratch7393/CALCULO%20DEL%20Kv.xlsx
  • 8/2/2019 Concepto de ad Un Alcance

    5/6

    PERFORACION Y VOLADURA I

    B : burden mximoKv : factor de volabilidad de la roca (0.7 1.0)Dt : dimetro del taladro (mm)

    PD : presin de detonacin del explosivo ( )

    RT : resistencia ala traccin de la roca ( )

    Cuadro de valores aproximados de la resistencia la traccindinmica

    ROCASANA

    RESISTENCIA ALA

    TRACCION(kg/cm2)

    PROMEDIO RESISTENCIA ALA

    TRACCIONDINAMICA

    PROMEDIO

    Andesita 70 70 350-910 630

    Anfibolita 230 230 1150-2990 2070Arenisca 50-200 125 625-1625 1125Basalto 50-250 150 750-1950 1350Caliza 40-300 170 850-2210 1530

    Cuarcita 100-300 200 1000-2600 1800Diorita 80-300 190 950-2470 1710

    Doloma 50-250 150 750-1950 1350Esquisto 20-55 37.5 187.5-487.5 337.5Gabro 140-300 220 1100-2860 1980Gneiss 50-200 125 625-1625 1125

    Granito 70-250 160 800-1080 1440Grauvaca 55-150 102.5 512.5-1332.5 922.5Limolita 27 27 135-351 243Lutita 15-100 57.5 285.5-747.5 516.5

    Mrmol 65-200 132.5 662.5-1722.5 1192.5Pizarra 70-200 135 675-1755 1215Toba 10-40 25 125-325 225Yeso 10-25 17.5 87.5-227.5 157.5

    Cuadro de valores de presin de detonacin de los explosivoscomunes

    FACULTAD DE INGENIERIA DE MINAS UNIVERSIDAD NACIONAL DELCENTRO DEL PERU

  • 8/2/2019 Concepto de ad Un Alcance

    6/6

    PERFORACION Y VOLADURA I

    TIPO PRESION DE DETONACION(kbar)

    Dinamita granulada 20-70

    Dinamita gelatina 70-140

    Emulsin encartuchada 20-100

    Emulsin a granel 20-100

    ANFO vaciado 7-45

    ANFO encartuchado 20-60

    ANFO pesado 20-90

    BURDEN EN UN BANCO

    1

    1

    1

    1

    1

    1

    2345

    3

    3

    3

    3

    3

    4

    4

    4

    4

    4

    5

    5

    5

    5

    5

    6

    6

    6

    6

    6

    6

    2

    2

    2

    2

    2

    ESPACIAMIENTO

    VISTA EN PLANTA DE UNA MALLA EN UN BANCO

    FACULTAD DE INGENIERIA DE MINAS UNIVERSIDAD NACIONAL DELCENTRO DEL PERU