I N D I C E. - appcenter.grupoice.com · El dimensionamiento de barras y uniones se efectúa de...

1 / 5 descr-TMD-D Rev.D

I N D I C E.

1 DESCRIPCIÓN GENERAL.

1.1 ANTECEDENTES.

1.2 REVISIONES.

1.3 GEOMETRÍA.

1.4 CONDICIONES DE USO.

1.5 CARGAS.

1.6 CÁLCULO.

1.7 MATERIALES.

2 CARGAS.

2.1 CÁLCULOS DE CONDUCTORES.

2.2 TABLA Y ESQUEMAS DE CARGAS.

2.3 VIENTO SOBRE ESTRUCTURA.

3 ENTRADA DE DATOS.

4 ESQUEMAS DE DEFORMADAS.

5 DIMENSIONAMIENTO.

6 REACCIONES.

7 DEFORMACIONES.

8 STUBS.

1/117


1 DESCRIPCIÓN GENERAL.

1.1 ANTECEDENTES.

La presente torre es de tipo reticulado y está destinada a las líneas 2x230kV del sistema SIEPAC.

El conductor es único por fase ACAR 1024.5 kcmil, los cables de guardia, uno tipo Alumoweld 7#8 ø9.8mm y el otro tipo "OPGW".

El diseño está basado en la siguiente documentación:

a) Especificacines Técnicas Licitación EPR/CCL-010L, sección VI, capítulos V y VI.

b) ASCE 10-97: Design of latticed steel transmission structures (emisión del cuaderno N°52 del ASCE como norma).

Esta memoria de cálculo se complementa con la siguiente documentación:

c) C2-I-CON-0007-70215 Rev.C: TMD - Esquema de cálculo.

d) C2-I-CON-0008-70215 1/2 Rev.C y 2/2 Rev.A: TMD - Numeración de nudos y barras.

1.2 REVISIONES.

En la Rev.B:

Se modificó la disposición de las diagonales de los cuadros del tronco superior.

Es suprimieron las componentes longitudinales negativas de cargas por conductores, que son ligeramente favorables para la torre pero son de difícil aplicación durante el ensayo de prototipo.

Las reacciones se emiten sin coeficientes de mayoración sobre las cargas que las originan.

En la Rev.C:

Se corrige el dimensionamiento de diagonales de patas cuando hay extensiones de tronco. Siendo determinante de estas diagonales la geometría sin extensión, no se altera el diseño de la torre.

En la Rev.D:

Se ajustan longitudes de pandeo de travesaños de cuadros del tronco inferior y se modifican perfiles de los de tronco común y extensión +12m. Estos son ajustes que surgieron como convenientes después del ensayo de cargas, y responden a lo acordado con el Revisor.

2/117


1.3 GEOMETRÍA.

La geometría responde al esquema E009 de las Especificaciones. La abertura de patas para máxima altura adoptada fue 10m, valor máximo fijado por Especificaciones.

A la máxima altura prevista (tronco básico + extensión de tronco 9m + patas 8m (=+3m)) se agregó una altura especial mediante la generación de una extensión de tronco 12m. La abertura de patas para esta altura especial (con las patas más largas) es inferior a 12m.

Se calcularon y dimensionaron las siguientes variantes:

- Tronco común con combinaciones de las 7 longitudes de patas.

- Extensiones de tronco +3, +6 y +9 añadidas, con combinaciones de patas +3 y -3.

- Extensión de tronco +12 con combinaciones de las 7 longitudes de patas.

1.4 CONDICIONES DE USO.

Las prestaciones respetadas son:

vano viento 400m (30°).

vano gravante 1500m.

vano gravante negativo -300m.

Las velocidades de viento máximas son de 100 km/h sobre conductores y estructura.

1.5 CARGAS.

Los cálculos mecánicos de conductores se encuentran en el apartado 2.1. Las cargas se basan en tiros iniciales de cables, que están definidos por condiciones finales: T.M.A. 25°C conductor: tiro 16% de rotura. T.M.A. 25°C cables de guardia: flecha 90% de la del conductor.

Se incluyen tabla y esquemas de cargas (2.2).

Se incluyen en esta memoria (apartado 2.3) planillas de cálculo de los valores de carga de viento que se aplican discretamente sobre determinados nudos de la estructura. En las tablas figura qué carga total corresponde a cada sector, y qué carga es aplicada en cada uno de 4 nudos limítrofes de sectores, procedente de ambos sectores adyacentes.

Teniendo la estructura menos de 60m no se aplica corrección por altura (cap.V, 1.9.9.4 b).

El coeficiente de forma es 3.2 (cap.V, 1.9.9.4 d).

3/117


1.6 CÁLCULO.

El cálculo estático de la estructura se efectúa mediante el programa GT-STRUDL (actualización generada por la Universidad de Georgia del programa original emitido por el M.I.T.).

La estructura se procesa como reticulado espacial en primer orden. Los nudos planos de la estructura son estabilizados con barras ficticias (de sección despreciable frente a las de las barras estructurales) conectadas a otras partes próximas de la estructura.

Siendo la entrada de datos para el cálculo excesivamente voluminosa, sólo se incluye en esta memoria (apartado 3) a efectos de control un resumen que comprende la introducción de cargas como estados de carga básicos y la formación de las hipótesis requeridas como combinaciones de estos estados básicos.

En la entrada de datos, todo lo que esté en una línea después de un signo “$ ” no es tenido en cuenta por el programa, y sólo tiene el valor de comentario.

El programa de cálculo genera graficaciones de la estructura en reposo, que son tomadas como base para los planos de numeración (c) y esquema (d), y posteriormente para la creación de plantillas de sistema sobre las que se generan los planos de fabricación y montaje.

Asimismo genera graficaciones de la estructura deformada bajo la acción de las cargas (se exagera la deformación para su mejor apreciación visual). Se han adjuntado algunas deformadas de la estructura (apartado 4).

El control de corrección de la entrada de datos de cálculo se ha hecho mediante los siguientes pasos:

Verificación de la entrada de cargas.

Verificación de la geometría (en reposo, incluyendo numeración) generada como resultado por el programa de cálculo.

Constatación de figuras deformadas armoniosas y de amplitud razonable.

Análisis de la razonabilidad de los esfuerzos y reacciones.

El dimensionamiento de barras y uniones se efectúa de acuerdo a los procedimientos descriptos en (b).

En la planilla de dimensionamiento figura el resultado de la envolvente de esfuerzos para cada grupo de barras (tracción y compresión): identificación de la barra, esfuerzo, e hipótesis que lo genera. Las hipótesis de cargas figuran con un sufijo que indica la geometría en la cual predominan para cada barra:

4/117


Extensión de tronco sin ext. +3m +6m +9m +12m Patas +3m 14 12 10 8 1 +3m/+2m 20 -- -- -- 7 +3m/+1m 19 -- -- -- 6 +3m/+0m 18 -- -- -- 5 +3m/-1m 17 -- -- -- 4 +3m/-2m 16 -- -- -- 3 +3m/-3m 15 13 11 9 2

La planilla de dimensionamiento indica el porcentaje de utilización respecto de la capacidad teórica de los perfiles elegidos y de los bulones determinados (mínimos necesarios).

Los tamaños de arriostramientos (redundantes) se asignan de tablas en función de longitudes obtenidas en el esquema geométrico y de la compresión en la barras soportadas obtenida de la planilla de dimensionamiento, considerando 3 criterios:

Esbeltez máxima 250.

Carga vertical 150kg.

Capacidad 2.5% de la compresión en la barra soportada.

Se adjuntan reacciones para 4 geometrías: la torre más alta (extensión de tronco 12m + 4 patas +3m). idem, con patas desparejas (ext.tr.12m + 2 pts.+3m + 2 pts.-3m). sin extensión de tronco, patas iguales (4 patas +3m). idem, con patas desparejas (2 pts.+3m + 2 pts.-3m).

Se adjuntan deformaciones para la geometría de mayor altura normal (extensión de tronco 9m + 4 patas +3m).

1.7 MATERIALES.

Los materiales adoptados son:

Perfiles de acero:

ISO 630 (E235): Fy = 2400 kg/cm² Fu = 3600 kg/cm².

(sustituible por ASTM A36).

ASTM 572, gr.50: Fy = 3515 kg/cm² Fu = 4575 kg/cm² (sufijo “H”, sustituible por ISO 630 E355).

Bulones ISO 898 5.6: Fy = 5000 kg/cm² Fu = 3000 kg/cm².

(sustituible por ASTM A394).

5/117

C A L C U L O M E C A N I C O D E C O N D U C T O R10/2/07 13:45

(cat-siepac-TMD) valores inicialesLAT 230kV SIEPAC

m1461T/m (1°hip.)=Norma:ACAR 18/19CONDUCTOR:1mm : Coef. aerodinám. p/ Ø <=kg11698Rotura:1 Ø intermedio :mm29.59Diámetro:1mm :p/ Ø >mm²519.1Sección:

viento angular x sen²VANOS:kg/m1.431Peso:m1500m Grav.(VG):300 Regul.(VR):kg/mm²4825Mód elast (E):

1m + (Vano - 0m) x0 Viento especial:/°Cx10-52.3Coef. dil. lin.:%Reac VReac HcFlechaTiroVanoSobreHieloVientoTemp.Hipót.decond.† cond.(hor.)distincargadens.esp.áng.

roturakgkgmmkgmkg/mrel.mm°kg/m²km/h°C

17.92147014617.712091 25TMA14.12147011499.811644 80Temp.máx.oper.26.6572571153713.03310740090 1000Vto.máx.25.9572533155212.91303340075 1000 "24.3572428159112.59284340060 1000 "22.4572285164012.212623400451000 "21.1572143167711.94247340030 1000 "20.757238168911.852423400151000 "

C A L C U L O M E C A N I C O D E C A B L E D E G U A R D I A10/2/07 13:45


m1512T/m (1°hip.)=Norma:Alumoweld 7N°8CABLE:1mm :0 Coef. aerodinám. p/ Ø <=kg7226Rotura:1 Ø intermedio :mm9.78Diámetro:1mm :0p/ Ø >mm²58.56Sección:


1m + (VanoR. - 0m)x0 Viento especial:1/°Cx10-51.296Coef. dil. lin.:%Reac VReac HcFlechaTiroVanoSobreHieloVientoTemp.Hipót.decond.† cond.(hor.)distincargadens.esp.áng.


8.2584015127.45589 25TMA7.9584014647.69570 35Temp.máx.oper.

12.7156189150113.3491840090 1000Vto.máx.12.3156176151513.22890400751000 "11.3156141155212.91817400601000 "10.115694160012.51729400451000 "9.215647163712.23667400301000 "8.915613165112.13645400151000 "

C A L C U L O M E C A N I C O D E C A B L E D E G U A R D I A O P G W10/2/07 13:45


m1565T/m (1°hip.)=-Norma:OPGWCONDUCTOR:1mm :0 Coef. aerodinám. p/ Ø <=kg7640Rotura:1 Ø intermedio :mm15Diámetro:1mm :0p/ Ø >mm²125Sección:


1m + (VanoR. - 0m)x0 Viento especial:1/°Cx10-51.45Coef. dil. lin.:%Reac VReac HcFlechaTiroVanoSobreHieloVientoTemp.Hipót.decond.† cond.(hor.)distincargadens.esp.áng.


12.3900015657.19939 25TMA11.890001506.87.47904 35Temp.máx.oper.19.22402891560.912.831467400 901000Vto.máx.18.62402701576.512.701424400 751000 "17.22402171619.812.361310400 601000 "15.42401451676.711.941175400 451000 "14.1240721720.811.641078400 301000 "13.7240191736.711.531045400 151000 "

2.1 Conductores

1 / 1 -

6/117

Torre de Retención TMD 2x230kV - Vano viento 400m (30°) - Vano peso 1500m

SeguridadFactor deOtras Cargasconductores

Cargas convencionales porHipótesis de Carga

especialnormalespecialnormal

Longit.(x)Longit.(x)Longit.(x)Longit.(x)Longit.(x)Transv.(y)Transv.(y)Transv.(y)Transv.(y)Transv.(y)Vert.(z)Vert.(z)Vert.(z)Vert.(z)Vert.(z)

1.5

1)(1.9.9.6 cuadroLongitudinal -

Desbalance

intactos con ángulo y vanos máximosTransversal, todos los cablesNormal,Viento Máximo

I

1.5


Desbalance

intactos con ángulo y vanos máximosLongitudinal, todos los cables

Normal, Viento MáximoII

1.5


Desbalance

vanos máximoslos cables intactos con ángulo y

Normal Viento Máximo a 45º , todosIII

1.2(1.9.9.9)

de un solo vanoTodos los cables

simultáneamentetensiones de cables EDS, todos los cables

lado de la estructura solamente,Excepcional, Amarre Temporario de un

IV-0

1.2(1.9.9.9)

de un solo vanoTodos los cables

simultáneamentetensiones de cables EDS, todos los cables

lado de la estructura solamente,Excepcional, Amarre Temporario de un

IV-30

1.7vert. 1.9.9.3(a)instalados o no -

Otros cables

un conductor o un hilo de guarda 70% de la tensión EDS, sin viento,Construcción, Tendido de Cables,

V-0

1.7vert. 1.9.9.3(a)instalados o no -

Otros cables

un conductor o un hilo de guarda 70% de la tensión EDS, sin viento,Construcción, Tendido de Cables,

V-30

1.7vert. 1.9.9.3(b)instalados o no -

Otros cables

conductor o un hilo de guardaCarga Vertical, sin viento, un

Mantenimiento, DobleVI-0

1.7vert. 1.9.9.3(b)instalados o no -

Otros cables

conductor o un hilo de guardaCarga Vertical, sin viento, un

Mantenimiento, DobleVI-30

-300m) Pesos reducidos (vano peso x -20% =

Totales

OPGWH.G.faseOPGWH.G.faseOPGWH.G.faseOPGWH.G.faseOPGWH.G.fase

250250500250250500000998631223399863122339009002747900900274712512324712012020053475413341254541334125490090027479009002747000120120200-205-133-2947584751756758475175690090027479009002747

9395892091000939589209100000000000000090090027479009002747900900274790090027479075692020000907569202000024315254148630510822431525414863051082900900274790090027479009002747900900274765741214640006574121464000000000000000

1479135637299009002747579456982900900274790090027476353981414000635398141400017010737948630510821701073794863051082147913563729900900274757945698290090027479009002747000000000000000000000000

15101510409690090027472502502501260126038469009002747000000000000486305108248630510824863051082486305108215101510409690090027472502502501260126038469009002747

-360-234-359

2.2 Tabla de cargas.

ld-TMD-siepac Rev.B

7/117

10/117

11/117

12/117

20/2/07 17:40(TMD)Viento longitudinal - TMDTMD 2x230kV SIEPACSuspensión

Velocidad de referencia Vo = 100.0 km/h Presión = (Vo/3.6)²/16 = 48 kg/m²k = 1 (invariable con la altura)Ct = fijo

Fuerza: At = (Vo/3.6)²/16 * St * Ct * k²Rugosidad: B Barras planas

Carga enAt k²zCtχSArea neta StSectorc/u debrutaGrupode4 nudos[kg][m][m²/m²][m²] [m] * [m] * n = [m²]torre

970.480240.06MONT.HG0.45225.0220.045CORD SUPMÉNSULA 0.62525.210.06CORD INF0.23422.60.045DIAG.0.30623.40.045DIAG.0.11012.20.05TRAV. SUP10.13212.20.06 " INF.0.18021.50.06MONT.0.51824.320.06CORD SUP0.48624.050.06CORD INF0.31922.660.06DIAG0.13212.20.06TRAV. SUP0.13212.20.06 " INF.0.912211.40.04ARRIOST

1717751.003.200.3215.53Σ=5.02

1.06225.90.09MONTTRONCO0.74626.220.06DIAGSUP.1/20.51824.320.06CORD SUPMÉNSULA 0.48624.050.06CORD INF20.31922.660.06DIAG0.13212.20.06TRAV. SUP0.13212.20.06 " INF.0.46425.80.04ARRIOST

" INF.ARRIOST

1555961.003.200.3012.98Σ=3.86

1.18025.90.1MONT0.80926.220.065DIAG0.54024.50.06CORD SUPTRONCO0.49224.10.06CORD INFSUP.2/20.34622.660.065DIAGMÉNSULA 0.13212.20.06TRAV. SUP30.14312.20.065 " INF.0.08821.10.04ARRIOST0.46425.80.04 "

1306471.003.200.3212.98Σ=4.19

1.20724.7510.127MONT0.87727.3050.06DIAGTRONCO

"1/20.45625.70.04ARRIOSTINF

1383921.003.200.1913.20Σ=2.54 1.89627.4640.127MONT

"1.607211.480.07DIAGTRONCO

"2/20.816210.20.04ARRIOSTINF


TMD-vto-lg 1 / 3 -

13/117





897081.003.200.1432.57Σ=4.5915.4280.05TRAV.

9301.003.200.000.00Σ=0.00TRANSICIÓN-----

2.06828.1430.127MONTPATA 1.33828.9170.075DIAG+80.66025.50.06Arriostr.0.200220.05 "0.25222.80.045 "0.31223.90.04 "

937451.003.200.2221.71Σ=4.83

7901.003.200.000.00Σ=0.00TRANSICIÓN-----

1.81027.1250.127MONTPATA 1.19327.9530.075DIAG+70.37423.40.055Arriostr.0.34023.40.05 "0.14421.60.045 "0.23222.90.04 "

796321.003.200.2219.00Σ=4.09

6801.003.200.000.00Σ=0.00TRANSICIÓN-----

1.55126.1080.127MONTPATA 0.98027.0030.07DIAG+60.48024.80.05Arriostr.0.26122.90.045 "0.23222.90.04 "

685411.003.200.2216.28Σ=3.50

5601.003.200.000.00Σ=0.00TRANSICIÓN-----

1.29325.090.127MONTPATA 0.91126.0760.075DIAG+50.27622.30.06Arriostr.0.35023.50.05 "0.080210.04 "

564491.003.200.2113.57Σ=2.91

4601.003.200.000.00Σ=0.00TRANSICIÓN-----

1.03424.0720.127MONTPATA 0.72625.1830.07DIAG+40.23122.10.055Arriostr.0.18021.80.05 "0.12621.40.045 "0.080210.04 "

463671.003.200.2210.86Σ=2.38

3601.003.200.000.00Σ=0.00TRANSICIÓN-----

0.77623.0540.127MONTPATA 0.78224.3450.09DIAG+30.200220.05Arriostr.0.10421.30.04 "

362871.003.200.238.14Σ=1.86


TMD-vto-lg 2 / 3 -

14/117





2501.003.200.000.00Σ=0.00TRANSICIÓN-----

0.51722.0360.127MONTPATA 0.54023.6010.075DIAG+20.13521.50.045Arriostr.0.08821.10.04 "

251981.003.200.245.43Σ=1.28

5101.003.200.000.00Σ=0.00TRANSICIÓN-----

0.77623.0540.127MONTEXTENSION 0.44023.3820.065DIAG+30.28022.80.05 "0.09921.10.045 "0.29815.9660.05TRAV.0.27022.70.05Arriostr.0.480260.04 "

514081.003.200.1517.49Σ=2.64

9201.003.200.000.00Σ=0.00TRANSICIÓN-----

1.55126.1080.127MONTEXTENSION 1.18727.9160.075DIAG+60.28022.80.05 "0.11721.30.045 "0.33916.7720.05TRAV.0.57025.70.05Arriostr.0.15321.70.045 "0.57627.20.04 "

927371.003.200.1337.41Σ=4.77

13101.003.200.000.00Σ=0.00TRANSICIÓN-----

2.32729.1610.127MONTEXTENSION 1.18727.9160.075DIAG+90.65724.3780.075 "0.28022.80.05 "0.16221.80.045 "0.37617.5120.05TRAV.0.86927.90.055Arriostr.0.43224.80.045 "0.50426.30.04 "

13110481.003.200.1159.74Σ=6.79

17801.003.200.000.00Σ=0.00TRANSICIÓN-----

3.103212.220.127MONTEXTENSION 1.18727.9160.075DIAG+121.71329.5180.09 "0.30822.80.055 "0.18922.10.045 "0.45818.3190.055TRAV.0.38523.50.055Arriostr.1.010210.10.05 "0.28823.20.045 "0.60827.60.04 "

17814271.003.200.1184.50Σ=9.25


TMD-vto-lg 3 / 3 -

15/117

20/2/07 17:40(TMD)Viento transversal - TMDTMD 2x230kV SIEPACSuspensión



Carga enAt k²zCtχSArea neta StSectorc/u deGrupode4 nudos[kg][m][m²/m²][m²] [m] * [m] * n = [m²]torre

620.480240.06MONT.HG0.09921.10.045CORD SUPMÉNSULA 0.21421.780.06CORD INF0.30723.4060.045DIAG.

210.11012.20.05TRAV. SUP0.08812.20.04 " INF.0.18021.50.06MONT.0.22321.860.06CORD SUP0.13221.10.06CORD INF0.11012.20.05TRAV. SUP0.08812.20.04 " INF.0.270160.045ARRIOST0.888211.10.04 "

1164921.003.200.2612.10Σ=3.19

1.06225.90.09MONTTRONCO0.74726.2230.06DIAGSUP.1/20.22321.860.06CORD SUPMÉNSULA 0.13221.10.06CORD INF2

20.11012.20.05TRAV. SUP0.08812.20.04 " INF.0.30023.750.04ARRIOST0.14413.60.04 "

ARRIOST1124331.003.200.2212.98Σ=2.81

1.18025.90.1MONT0.80926.2230.065DIAG0.13221.10.06CORD SUPTRONCO0.22321.860.06CORD INFSUP.2/2

2MÉNSULA 0.11012.20.05TRAV. SUP30.14312.20.065 " INF.0.38824.850.04ARRIOST

"

1074611.003.200.2312.98Σ=2.99

1.20724.7510.127MONT0.87727.3050.06DIAGTRONCO

"1/20.45625.70.04ARRIOSTINF

1383921.003.200.1913.20Σ=2.54 1.89627.4640.127MONT

"1.607211.480.07DIAGTRONCO

"2/20.816210.20.04ARRIOSTINF

2.3 Viento sobre estructura.

TMD-vto-tr 1 / 3 -

16/117





897121.003.200.1432.57Σ=4.6215.4280.055TRAV.CUADRO

9301.003.200.000.00Σ=0.00TRANSICIÓN-----

2.06828.1430.127MONTPATA 1.33828.9170.075DIAG+80.66025.50.06Arriostr.0.200220.05 "0.25222.80.045 "0.31223.90.04 "

937451.003.200.2221.71Σ=4.83

7901.003.200.000.00Σ=0.00TRANSICIÓN-----

1.81027.1250.127MONTPATA 1.19327.9530.075DIAG+70.37423.40.055Arriostr.0.34023.40.05 "0.14421.60.045 "0.23222.90.04 "

796321.003.200.2219.00Σ=4.09

6801.003.200.000.00Σ=0.00TRANSICIÓN-----

1.55126.1080.127MONTPATA 0.98027.0030.07DIAG+60.48024.80.05Arriostr.0.26122.90.045 "0.23222.90.04 "

685411.003.200.2216.28Σ=3.50

5601.003.200.000.00Σ=0.00TRANSICIÓN-----

1.29325.090.127MONTPATA 0.91126.0760.075DIAG+50.27622.30.06Arriostr.0.35023.50.05 "0.080210.04 "

564491.003.200.2113.57Σ=2.91

4601.003.200.000.00Σ=0.00TRANSICIÓN-----

1.03424.0720.127MONTPATA 0.72625.1830.07DIAG+40.23122.10.055Arriostr.0.18021.80.05 "0.12621.40.045 "0.080210.04 "

463671.003.200.2210.86Σ=2.38

3601.003.200.000.00Σ=0.00TRANSICIÓN-----

0.77623.0540.127MONTPATA 0.78224.3450.09DIAG+30.200220.05Arriostr.0.10421.30.04 "

"

362871.003.200.238.14Σ=1.86


TMD-vto-tr 2 / 3 -

17/117





2501.003.200.000.00Σ=0.00TRANSICIÓN-----

0.51722.0360.127MONTPATA 0.54023.6010.075DIAG+20.13521.50.045Arriostr.0.08821.10.04 "

"

251981.003.200.245.43Σ=1.28

5101.003.200.000.00Σ=0.00TRANSICIÓN-----

0.77623.0540.127MONTEXTENSION 0.44023.3820.065DIAG+30.28022.80.05 "0.09921.10.045 "0.29815.9660.05TRAV.0.27022.70.05Arriostr.0.480260.04 "

514081.003.200.1517.49Σ=2.64

9201.003.200.000.00Σ=0.00TRANSICIÓN-----

1.55126.1080.127MONTEXTENSION 1.18727.9160.075DIAG+60.28022.80.05 "0.11721.30.045 "0.33916.7720.05TRAV.0.57025.70.05Arriostr.0.15321.70.045 "0.57627.20.04 "

927371.003.200.1337.41Σ=4.77

13101.003.200.000.00Σ=0.00TRANSICIÓN-----

2.32729.1610.127MONTEXTENSION 1.18727.9160.075DIAG+90.65724.3780.075 "0.28022.80.05 "0.16221.80.045 "0.37617.5120.05TRAV.0.86927.90.055Arriostr.0.43224.80.045 "0.50426.30.04 "

13110481.003.200.1159.74Σ=6.79

17801.003.200.000.00Σ=0.00TRANSICIÓN-----

3.103212.220.127MONTEXTENSION 1.18727.9160.075DIAG+121.71329.5180.09 "0.30822.80.055 "0.18922.10.045 "0.45818.3190.055TRAV.0.38523.50.055Arriostr.1.010210.10.05 "0.28823.20.045 "0.60827.60.04 "

17814271.003.200.1184.50Σ=9.25


TMD-vto-tr 3 / 3 -

18/117

1 / 17 TMD-input-B Rev.B

3. Entrada de datos STRUDL 'TMD' 'TMD 2x230kV SIEPAC - Rev.B torre Retenci¢n ' COUTPUT 'TMD.out' $ Planilla: 'TMD' $ $ $ T O P O L O G I A $ E J E S : Z = Vertical - Y = Transversal - X = Longitudinal $ $ longitudinal $ +X (l¡nea) $ | Z vertical $ 2 para c lculo $ 2 | 1 $ | $ - 3 - - - 1 ------- 1 ------- +Y (transversal) $ ' $ 3 ' 4 $ 4 $ ' $ UNITS METERS KG CENTIGRADE DEGREES $ $ TYPE SPACE TRUSS $ $ #################################################### $ C A R G A S $ #################################################### $ $ $ Las cargas de viento sobre la torre se calculan con la f¢rmula $ Qvtorre = qo (St1 Ct1 senfi^2 + St2 Ct2 cosfi^2) $ St1 = superficie de cara longitudinal y St2 = superficie de cara tranversal $ Qv en la direcci¢n long = Qv cos fi

19/117


$ Qv en la direcci¢n transv = Qv sen fi $ $ Para cada ngulo fi se calculan los coeficientes de cada direcci¢n (long y transv) $ $ Para la direcci¢n X long Clong-l = senfi^2 cosfi $ Para la direcci¢n X long Clong-t = cosfi^2 cosfi $ Para la direcci¢n Y transv Ctransv-l = senfi^2 senfi $ Para la direcci¢n Y transv Ctransv-t = cosfi^2 senfi $ $ $ V I E N T O A 0 GRADOS - LONGITUDINAL $ LOADING '*VL' '*Viento longitudinal parte com£n' JOINT LOADS 'CX-1' 'CX-3' FORCE X 194 FORCE Y 0 'TS-209' TO 'TS-212' FORCE X 171 FORCE Y 0 'TS-409' TO 'TS-412' FORCE X 155 FORCE Y 0 'TS-609' TO 'TS-612' FORCE X 130 FORCE Y 0 'TC-709' TO 'TC-712' FORCE X 138 FORCE Y 0 'TC-717' TO 'TC-720' FORCE X 89 FORCE Y 0 $ LOADING '*VL12' '*Viento longitudinal ext.12' JOINT LOADS 'E12-745' TO 'E12-748' 'TC-717' TO 'TC-720' FORCE X 178 FORCE Y 0 '12P8-801' TO '12P8-804' 'E12-745' TO 'E12-748' FORCE X 93 FORCE Y 0 '12P7-801' TO '12P7-804' FORCE X 79 FORCE Y 0 '12P6-801' TO '12P6-804' FORCE X 68 FORCE Y 0 '12P5-801' TO '12P5-804' FORCE X 56 FORCE Y 0 '12P4-801' TO '12P4-804' FORCE X 46 FORCE Y 0 '12P3-801' TO '12P3-804' FORCE X 36 FORCE Y 0 '12P2-801' TO '12P2-804' FORCE X 25 FORCE Y 0 $ LOADING '*VL9' '*Viento longitudinal ext.9' JOINT LOADS 'E9-737' TO 'E9-740' 'TC-717' TO 'TC-720' FORCE X 131 FORCE Y 0 '9P8-801' TO '9P8-804' 'E9-737' TO 'E9-740' FORCE X 93 FORCE Y 0

20/117


'9P7-801' TO '9P7-804' FORCE X 79 FORCE Y 0 '9P6-801' TO '9P6-804' FORCE X 68 FORCE Y 0 '9P5-801' TO '9P5-804' FORCE X 56 FORCE Y 0 '9P4-801' TO '9P4-804' FORCE X 46 FORCE Y 0 '9P3-801' TO '9P3-804' FORCE X 36 FORCE Y 0 '9P2-801' TO '9P2-804' FORCE X 25 FORCE Y 0 $ LOADING '*VL6' '*Viento longitudinal ext.6' JOINT LOADS 'E6-729' TO 'E6-732' 'TC-717' TO 'TC-720' FORCE X 92 FORCE Y 0 '6P8-801' TO '6P8-804' 'E6-729' TO 'E6-732' FORCE X 93 FORCE Y 0 '6P7-801' TO '6P7-804' FORCE X 79 FORCE Y 0 '6P6-801' TO '6P6-804' FORCE X 68 FORCE Y 0 '6P5-801' TO '6P5-804' FORCE X 56 FORCE Y 0 '6P4-801' TO '6P4-804' FORCE X 46 FORCE Y 0 '6P3-801' TO '6P3-804' FORCE X 36 FORCE Y 0 '6P2-801' TO '6P2-804' FORCE X 25 FORCE Y 0 $ LOADING '*VL3' '*Viento longitudinal ext.3' JOINT LOADS 'E3-721' TO 'E3-724' 'TC-717' TO 'TC-720' FORCE X 51 FORCE Y 0 '3P8-801' TO '3P8-804' 'E3-721' TO 'E3-724' FORCE X 93 FORCE Y 0 '3P7-801' TO '3P7-804' FORCE X 79 FORCE Y 0 '3P6-801' TO '3P6-804' FORCE X 68 FORCE Y 0 '3P5-801' TO '3P5-804' FORCE X 56 FORCE Y 0 '3P4-801' TO '3P4-804' FORCE X 46 FORCE Y 0 '3P3-801' TO '3P3-804' FORCE X 36 FORCE Y 0 '3P2-801' TO '3P2-804' FORCE X 25 FORCE Y 0 $ LOADING '*VL0' '*Viento longitudinal patas s/ext.' JOINT LOADS 'AP8-801' TO 'AP8-804' 'TC-717' TO 'TC-720' FORCE X 93 FORCE Y 0 'AP7-801' TO 'AP7-804' FORCE X 79 FORCE Y 0 'AP6-801' TO 'AP6-804' FORCE X 68 FORCE Y 0 'AP5-801' TO 'AP5-804' FORCE X 56 FORCE Y 0 'AP4-801' TO 'AP4-804' FORCE X 46 FORCE Y 0

21/117


'AP3-801' TO 'AP3-804' FORCE X 36 FORCE Y 0 'AP2-801' TO 'AP2-804' FORCE X 25 FORCE Y 0 $ $ $ V I E N T O A 45 GRADOS - ANGULAR $ LOADING '*V45' '*Viento angular parte com£n' JOINT LOADS 'CX-1' 'CX-3' FORCE X 112 FORCE Y 112 'TS-209' TO 'TS-212' FORCE X 101 FORCE Y 101 'TS-409' TO 'TS-412' FORCE X 94 FORCE Y 94 'TS-609' TO 'TS-612' FORCE X 84 FORCE Y 84 'TC-709' TO 'TC-712' FORCE X 97 FORCE Y 97 'TC-717' TO 'TC-720' FORCE X 63 FORCE Y 63 $ LOADING '*V45-12' '*Viento angular ext.12' JOINT LOADS 'E12-745' TO 'E12-748' 'TC-717' TO 'TC-720' FORCE X 126 FORCE Y 126 '12P8-801' TO '12P8-804' 'E12-745' TO 'E12-748' FORCE X 66 FORCE Y 66 '12P7-801' TO '12P7-804' FORCE X 56 FORCE Y 56 '12P6-801' TO '12P6-804' FORCE X 48 FORCE Y 48 '12P5-801' TO '12P5-804' FORCE X 40 FORCE Y 40 '12P4-801' TO '12P4-804' FORCE X 32 FORCE Y 32 '12P3-801' TO '12P3-804' FORCE X 25 FORCE Y 25 '12P2-801' TO '12P2-804' FORCE X 17 FORCE Y 17 $ LOADING '*V45-9' '*Viento angular ext.9' JOINT LOADS 'E9-737' TO 'E9-740' 'TC-717' TO 'TC-720' FORCE X 93 FORCE Y 93 '9P8-801' TO '9P8-804' 'E9-737' TO 'E9-740' FORCE X 66 FORCE Y 66 '9P7-801' TO '9P7-804' FORCE X 56 FORCE Y 56 '9P6-801' TO '9P6-804' FORCE X 48 FORCE Y 48 '9P5-801' TO '9P5-804' FORCE X 40 FORCE Y 40 '9P4-801' TO '9P4-804' FORCE X 32 FORCE Y 32 '9P3-801' TO '9P3-804' FORCE X 25 FORCE Y 25 '9P2-801' TO '9P2-804' FORCE X 17 FORCE Y 17

22/117


$ LOADING '*V45-6' '*Viento angular ext.6' JOINT LOADS 'E6-729' TO 'E6-732' 'TC-717' TO 'TC-720' FORCE X 65 FORCE Y 65 '6P8-801' TO '6P8-804' 'E6-729' TO 'E6-732' FORCE X 66 FORCE Y 66 '6P7-801' TO '6P7-804' FORCE X 56 FORCE Y 56 '6P6-801' TO '6P6-804' FORCE X 48 FORCE Y 48 '6P5-801' TO '6P5-804' FORCE X 40 FORCE Y 40 '6P4-801' TO '6P4-804' FORCE X 32 FORCE Y 32 '6P3-801' TO '6P3-804' FORCE X 25 FORCE Y 25 '6P2-801' TO '6P2-804' FORCE X 17 FORCE Y 17 $ LOADING '*V45-3' '*Viento angular ext.3' JOINT LOADS 'E3-721' TO 'E3-724' 'TC-717' TO 'TC-720' FORCE X 36 FORCE Y 36 '3P8-801' TO '3P8-804' 'E3-721' TO 'E3-724' FORCE X 66 FORCE Y 66 '3P7-801' TO '3P7-804' FORCE X 56 FORCE Y 56 '3P6-801' TO '3P6-804' FORCE X 48 FORCE Y 48 '3P5-801' TO '3P5-804' FORCE X 40 FORCE Y 40 '3P4-801' TO '3P4-804' FORCE X 32 FORCE Y 32 '3P3-801' TO '3P3-804' FORCE X 25 FORCE Y 25 '3P2-801' TO '3P2-804' FORCE X 17 FORCE Y 17 $ LOADING '*V45-0' '*Viento angular patas s/ext.' JOINT LOADS 'AP8-801' TO 'AP8-804' 'TC-717' TO 'TC-720' FORCE X 66 FORCE Y 66 'AP7-801' TO 'AP7-804' FORCE X 56 FORCE Y 56 'AP6-801' TO 'AP6-804' FORCE X 48 FORCE Y 48 'AP5-801' TO 'AP5-804' FORCE X 40 FORCE Y 40 'AP4-801' TO 'AP4-804' FORCE X 32 FORCE Y 32 'AP3-801' TO 'AP3-804' FORCE X 25 FORCE Y 25 'AP2-801' TO 'AP2-804' FORCE X 17 FORCE Y 17 $ $ $ $

23/117


$ V I E N T O A 90 GRADOS - TRANSVERSAL $ LOADING '*VT' '*Viento transversal parte com£n' JOINT LOADS 'CX-1' 'CX-3' FORCE X 0 FORCE Y 123 'TS-209' TO 'TS-212' FORCE X 0 FORCE Y 116 'TS-409' TO 'TS-412' FORCE X 0 FORCE Y 112 'TS-609' TO 'TS-612' FORCE X 0 FORCE Y 107 'TC-709' TO 'TC-712' FORCE X 0 FORCE Y 138 'TC-717' TO 'TC-720' FORCE X 0 FORCE Y 89 $ LOADING '*VT12' '*Viento transversal ext.12' JOINT LOADS 'E12-745' TO 'E12-748' 'TC-717' TO 'TC-720' FORCE X 0 FORCE Y 178 '12P8-801' TO '12P8-804' 'E12-745' TO 'E12-748' FORCE X 0 FORCE Y 93 '12P7-801' TO '12P7-804' FORCE X 0 FORCE Y 79 '12P6-801' TO '12P6-804' FORCE X 0 FORCE Y 68 '12P5-801' TO '12P5-804' FORCE X 0 FORCE Y 56 '12P4-801' TO '12P4-804' FORCE X 0 FORCE Y 46 '12P3-801' TO '12P3-804' FORCE X 0 FORCE Y 36 '12P2-801' TO '12P2-804' FORCE X 0 FORCE Y 25 $ LOADING '*VT9' '*Viento transversal ext.9' JOINT LOADS 'E9-737' TO 'E9-740' 'TC-717' TO 'TC-720' FORCE X 0 FORCE Y 131 '9P8-801' TO '9P8-804' 'E9-737' TO 'E9-740' FORCE X 0 FORCE Y 93 '9P7-801' TO '9P7-804' FORCE X 0 FORCE Y 79 '9P6-801' TO '9P6-804' FORCE X 0 FORCE Y 68 '9P5-801' TO '9P5-804' FORCE X 0 FORCE Y 56 '9P4-801' TO '9P4-804' FORCE X 0 FORCE Y 46 '9P3-801' TO '9P3-804' FORCE X 0 FORCE Y 36 '9P2-801' TO '9P2-804' FORCE X 0 FORCE Y 25 $ LOADING '*VT6' '*Viento transversal ext.6' JOINT LOADS 'E6-729' TO 'E6-732' 'TC-717' TO 'TC-720' FORCE X 0 FORCE Y 92

24/117


'6P8-801' TO '6P8-804' 'E6-729' TO 'E6-732' FORCE X 0 FORCE Y 93 '6P7-801' TO '6P7-804' FORCE X 0 FORCE Y 79 '6P6-801' TO '6P6-804' FORCE X 0 FORCE Y 68 '6P5-801' TO '6P5-804' FORCE X 0 FORCE Y 56 '6P4-801' TO '6P4-804' FORCE X 0 FORCE Y 46 '6P3-801' TO '6P3-804' FORCE X 0 FORCE Y 36 '6P2-801' TO '6P2-804' FORCE X 0 FORCE Y 25 $ LOADING '*VT3' '*Viento transversal ext.3' JOINT LOADS 'E3-721' TO 'E3-724' 'TC-717' TO 'TC-720' FORCE X 0 FORCE Y 51 '3P8-801' TO '3P8-804' 'E3-721' TO 'E3-724' FORCE X 0 FORCE Y 93 '3P7-801' TO '3P7-804' FORCE X 0 FORCE Y 79 '3P6-801' TO '3P6-804' FORCE X 0 FORCE Y 68 '3P5-801' TO '3P5-804' FORCE X 0 FORCE Y 56 '3P4-801' TO '3P4-804' FORCE X 0 FORCE Y 46 '3P3-801' TO '3P3-804' FORCE X 0 FORCE Y 36 '3P2-801' TO '3P2-804' FORCE X 0 FORCE Y 25 $ LOADING '*VT0' '*Viento transversal patas s/ext.' JOINT LOADS 'AP8-801' TO 'AP8-804' 'TC-717' TO 'TC-720' FORCE X 0 FORCE Y 93 'AP7-801' TO 'AP7-804' FORCE X 0 FORCE Y 79 'AP6-801' TO 'AP6-804' FORCE X 0 FORCE Y 68 'AP5-801' TO 'AP5-804' FORCE X 0 FORCE Y 56 'AP4-801' TO 'AP4-804' FORCE X 0 FORCE Y 46 'AP3-801' TO 'AP3-804' FORCE X 0 FORCE Y 36 'AP2-801' TO 'AP2-804' FORCE X 0 FORCE Y 25 $ $ $ $

25/117


$ C A R G A S D E C O N D U C T O R E S $ LOADING '*I' 'Viento M ximo Transversal 90§' JOINT LOADS 'CX-1' FORCE X 250 FORCE Y 631 FORCE Z -900 'CX-3' FORCE X 250 FORCE Y 998 FORCE Z -900 'M1-209' 'M1-211' FORCE X 500 FORCE Y 2233 FORCE Z -2747 'M2-409' 'M2-411' FORCE X 500 FORCE Y 2233 FORCE Z -2747 'M3-609' 'M3-611' FORCE X 500 FORCE Y 2233 FORCE Z -2747 $ LOADING '*II' 'Viento M ximo Longitudinal 90§' JOINT LOADS 'CX-1' FORCE X 123 FORCE Y 334 FORCE Z -900 'CX-3' FORCE X 125 FORCE Y 541 FORCE Z -900 'M1-209' 'M1-211' FORCE X 247 FORCE Y 1254 FORCE Z -2747 'M2-409' 'M2-411' FORCE X 247 FORCE Y 1254 FORCE Z -2747 'M3-609' 'M3-611' FORCE X 247 FORCE Y 1254 FORCE Z -2747 $ LOADING '*III' 'Viento M ximo angular 45§' JOINT LOADS 'CX-1' FORCE X 0 FORCE Y 475 FORCE Z -900 'CX-3' FORCE X 0 FORCE Y 758 FORCE Z -900 'M1-209' 'M1-211' FORCE X 0 FORCE Y 1756 FORCE Z -2747 'M2-409' 'M2-411' FORCE X 0 FORCE Y 1756 FORCE Z -2747 'M3-609' 'M3-611' FORCE X 0 FORCE Y 1756 FORCE Z -2747 $ LOADING '*I-R' 'Viento M ximo Transversal 90§ (verticales reducidas)' JOINT LOADS 'CX-1' FORCE X 250 FORCE Y 631 FORCE Z 360 'CX-3' FORCE X 250 FORCE Y 998 FORCE Z 360 'M1-209' 'M1-211' FORCE X 500 FORCE Y 2233 FORCE Z 359 'M2-409' 'M2-411' FORCE X 500 FORCE Y 2233 FORCE Z 359 'M3-609' 'M3-611' FORCE X 500 FORCE Y 2233 FORCE Z 359 $ $ $

26/117


LOADING '*II-R' 'Viento M ximo Longitudinal 90§ (verticales reducidas)' JOINT LOADS 'CX-1' FORCE X 123 FORCE Y 334 FORCE Z 360 'CX-3' FORCE X 125 FORCE Y 541 FORCE Z 360 'M1-209' 'M1-211' FORCE X 247 FORCE Y 1254 FORCE Z 359 'M2-409' 'M2-411' FORCE X 247 FORCE Y 1254 FORCE Z 359 'M3-609' 'M3-611' FORCE X 247 FORCE Y 1254 FORCE Z 359 $ LOADING '*III-R' 'Viento M ximo angular 45§ (verticales reducidas)' JOINT LOADS 'CX-1' FORCE X 0 FORCE Y 475 FORCE Z 360 'CX-3' FORCE X 0 FORCE Y 758 FORCE Z 360 'M1-209' 'M1-211' FORCE X 0 FORCE Y 1756 FORCE Z 359 'M2-409' 'M2-411' FORCE X 0 FORCE Y 1756 FORCE Z 359 'M3-609' 'M3-611' FORCE X 0 FORCE Y 1756 FORCE Z 359 $ LOADING '*IVx1-0' 'Amarre temporal 0§' JOINT LOADS 'CX-3' FORCE X 939 FORCE Y 0 FORCE Z -900 'M1-211' FORCE X 2091 FORCE Y 0 FORCE Z -2747 'M2-411' FORCE X 2091 FORCE Y 0 FORCE Z -2747 'M3-611' FORCE X 2091 FORCE Y 0 FORCE Z -2747 $ LOADING '*IVx2-0' 'Amarre temporal 0§' JOINT LOADS 'CX-1' FORCE X 589 FORCE Y 0 FORCE Z -900 'CX-3' FORCE X 939 FORCE Y 0 FORCE Z -900 'M1-209' 'M1-211' FORCE X 2091 FORCE Y 0 FORCE Z -2747 'M2-409' 'M2-411' FORCE X 2091 FORCE Y 0 FORCE Z -2747 'M3-609' 'M3-611' FORCE X 2091 FORCE Y 0 FORCE Z -2747 $ LOADING '*IVx2-30' 'Amarre temporal 30§' JOINT LOADS 'CX-1' FORCE X 569 FORCE Y 112 FORCE Z -900 'CX-3' FORCE X 907 FORCE Y 243 FORCE Z -900 'M1-209' 'M1-211' FORCE X 2020 FORCE Y 541 FORCE Z -2747

27/117


'M2-409' 'M2-411' FORCE X 2020 FORCE Y 541 FORCE Z -2747 'M3-609' 'M3-611' FORCE X 2020 FORCE Y 541 FORCE Z -2747 $ LOADING '*Vg' 'Tendido (0§ - OPGW)' JOINT LOADS 'CX-1' FORCE X 0 FORCE Y 0 FORCE Z -900 'CX-3' FORCE X 657 FORCE Y 0 FORCE Z -1479 'M1-209' 'M1-211' FORCE X 0 FORCE Y 0 FORCE Z -2747 'M2-409' 'M2-411' FORCE X 0 FORCE Y 0 FORCE Z -2747 'M3-609' 'M3-611' FORCE X 0 FORCE Y 0 FORCE Z -2747 $ LOADING '*Vs' 'Tendido ( 0§ - Fase sup.)' JOINT LOADS 'CX-1' 'CX-3' FORCE X 0 FORCE Y 0 FORCE Z -900 'M1-209' FORCE X 0 FORCE Y 0 FORCE Z -2747 'M1-211' FORCE X 1464 FORCE Y 0 FORCE Z -3729 'M2-409' 'M2-411' FORCE X 0 FORCE Y 0 FORCE Z -2747 'M3-609' 'M3-611' FORCE X 0 FORCE Y 0 FORCE Z -2747 $ LOADING '*Vi' 'Tendido ( 0§ - Fase inf.)' JOINT LOADS 'CX-1' 'CX-3' FORCE X 0 FORCE Y 0 FORCE Z -900 'M1-209' 'M1-211' FORCE X 0 FORCE Y 0 FORCE Z -2747 'M2-409' 'M2-411' FORCE X 0 FORCE Y 0 FORCE Z -2747 'M3-609' FORCE X 0 FORCE Y 0 FORCE Z -2747 'M3-611' FORCE X 1464 FORCE Y 0 FORCE Z -3729 $ LOADING '*VIg' 'Mantenimiento ( OPGW 30§ )' JOINT LOADS 'CX-3' FORCE X 0 FORCE Y 486 FORCE Z -1510 'M1-211' FORCE X 0 FORCE Y 1082 FORCE Z -2747 'M2-411' FORCE X 0 FORCE Y 1082 FORCE Z -2747 'M3-611' FORCE X 0 FORCE Y 1082 FORCE Z -2747 $ $ $

28/117


LOADING '*VIfs' 'Mantenimiento ( Fase sup. 30§ )' JOINT LOADS 'CX-3' FORCE X 0 FORCE Y 486 FORCE Z -900 'M1-211' FORCE X 0 FORCE Y 1082 FORCE Z -4096 'M2-411' FORCE X 0 FORCE Y 1082 FORCE Z -2747 'M3-611' FORCE X 0 FORCE Y 1082 FORCE Z -2747 $ LOADING '*VIfi' 'Mantenimiento ( Fase inf. 30§ )' JOINT LOADS 'CX-3' FORCE X 0 FORCE Y 486 FORCE Z -900 'M1-211' FORCE X 0 FORCE Y 1082 FORCE Z -2747 'M2-411' FORCE X 0 FORCE Y 1082 FORCE Z -2747 'M3-611' FORCE X 0 FORCE Y 1082 FORCE Z -4096 $ LOADING '*VIg2' 'Mantenimiento (OPGW 30§)' JOINT LOADS 'CX-1' FORCE X 0 FORCE Y 486 FORCE Z -1510 'CX-3' FORCE X 0 FORCE Y 305 FORCE Z -900 'M1-209' 'M1-211' FORCE X 0 FORCE Y 1082 FORCE Z -2747 'M2-409' 'M2-411' FORCE X 0 FORCE Y 1082 FORCE Z -2747 'M3-609' 'M3-611' FORCE X 0 FORCE Y 1082 FORCE Z -2747 $ LOADING '*VIfs2' 'Mantenimiento (Fase superior 30§)' JOINT LOADS 'CX-1' FORCE X 0 FORCE Y 486 FORCE Z -900 'CX-3' FORCE X 0 FORCE Y 305 FORCE Z -900 'M1-209' FORCE X 0 FORCE Y 1082 FORCE Z -4096 'M1-211' FORCE X 0 FORCE Y 1082 FORCE Z -2747 'M2-409' 'M2-411' FORCE X 0 FORCE Y 1082 FORCE Z -2747 'M3-609' 'M3-611' FORCE X 0 FORCE Y 1082 FORCE Z -2747 $ LOADING '*VIfi2' 'Mantenimiento (Fase inferior 30§)' JOINT LOADS 'CX-1' FORCE X 0 FORCE Y 486 FORCE Z -900 'CX-3' FORCE X 0 FORCE Y 305 FORCE Z -900 'M1-209' 'M1-211' FORCE X 0 FORCE Y 1082 FORCE Z -2747

29/117


'M2-409' 'M2-411' FORCE X 0 FORCE Y 1082 FORCE Z -2747 'M3-609' FORCE X 0 FORCE Y 1082 FORCE Z -4096 'M3-611' FORCE X 0 FORCE Y 1082 FORCE Z -2747 $ $ $ $ $ COUTPUT 'TMD.lgt' UNITS METERS PRINT MEMBER LENGTH ALL $ COUTPUT 'TMD.out' $ $ $ DEAD LOADING 'DL' 'Peso propio torre' -Z ALL ACTIVE MEMBERS $ $ $ Peso aprox. = DLx1.35 1.35x1.5~2 1.35x1.2~1.6 1.35x1.7~2.3 $ $ $ HIPOTESIS DE VIENTO SOBRE TORRE SIN EXTENSION DE TRONCO $ LOAD COMBINATION 'I-0' 'Viento M ximo Transversal 90§' - SPECIFICATIONS 'DL' 2. '*I' 1.5 - '*VT' 1.5 '*VT0' 1.5 $ LOAD COMBINATION 'II-0' 'Viento M ximo Longitudinal' - SPECIFICATIONS 'DL' 2. '*II' 1.5 - '*VL' 1.5 '*VL0' 1.5 $ LOAD COMBINATION 'III-0' 'Viento M ximo angular 45§' - SPECIFICATIONS 'DL' 2. '*III' 1.5 - '*V45' 1.5 '*V45-0' 1.5 $ LOAD COMBINATION 'I-0R' 'Viento M ximo Transversal 90§ (Verticales reducidas)' -

30/117


SPECIFICATIONS 'DL' 2. '*I-R' 1.5 - '*VT' 1.5 '*VT0' 1.5 $ LOAD COMBINATION 'II-0R' 'Viento M ximo Longitudinal (Verticales reducidas)' - SPECIFICATIONS 'DL' 2. '*II-R' 1.5 - '*VL' 1.5 '*VL0' 1.5 $ LOAD COMBINATION 'III-0R' 'Viento M ximo angular 45§ (Verticales reducidas)' - SPECIFICATIONS 'DL' 2. '*III-R' 1.5 - '*V45' 1.5 '*V45-0' 1.5 $ $ $ HIPOTESIS DE VIENTO SOBRE TORRE CON EXTENSION +3 $ LOAD COMBINATION 'I-3' 'Viento M ximo Transversal 90§' - SPECIFICATIONS 'DL' 2. '*I' 1.5 - '*VT' 1.5 '*VT3' 1.5 $ LOAD COMBINATION 'II-3' 'Viento M ximo Longitudinal' - SPECIFICATIONS 'DL' 2. '*II' 1.5 - '*VL' 1.5 '*VL3' 1.5 $ LOAD COMBINATION 'III-3' 'Viento M ximo angular 45§' - SPECIFICATIONS 'DL' 2. '*III' 1.5 - '*V45' 1.5 '*V45-3' 1.5 $ LOAD COMBINATION 'I-3R' 'Viento M ximo Transversal 90§ (Verticales reducidas)' - SPECIFICATIONS 'DL' 2. '*I-R' 1.5 - '*VT' 1.5 '*VT3' 1.5 $ LOAD COMBINATION 'II-3R' 'Viento M ximo Longitudinal (Verticales reducidas)' - SPECIFICATIONS 'DL' 2. '*II-R' 1.5 - '*VL' 1.5 '*VL3' 1.5 $ LOAD COMBINATION 'III-3R' 'Viento M ximo angular 45§ (Verticales reducidas)' - SPECIFICATIONS 'DL' 2. '*III-R' 1.5 -

31/117


'*V45' 1.5 '*V45-3' 1.5 $ $ $ HIPOTESIS DE VIENTO SOBRE TORRE CON EXTENSION +6 $ LOAD COMBINATION 'I-6' 'Viento M ximo Transversal 90§' - SPECIFICATIONS 'DL' 2. '*I' 1.5 - '*VT' 1.5 '*VT6' 1.5 $ LOAD COMBINATION 'II-6' 'Viento M ximo Longitudinal' - SPECIFICATIONS 'DL' 2. '*II' 1.5 - '*VL' 1.5 '*VL6' 1.5 $ LOAD COMBINATION 'III-6' 'Viento M ximo angular 45§' - SPECIFICATIONS 'DL' 2. '*III' 1.5 - '*V45' 1.5 '*V45-6' 1.5 $ LOAD COMBINATION 'I-6R' 'Viento M ximo Transversal 90§ (Verticales reducidas)' - SPECIFICATIONS 'DL' 2. '*I-R' 1.5 - '*VT' 1.5 '*VT6' 1.5 $ LOAD COMBINATION 'II-6R' 'Viento M ximo Longitudinal (Verticales reducidas)' - SPECIFICATIONS 'DL' 2. '*II-R' 1.5 - '*VL' 1.5 '*VL6' 1.5 $ LOAD COMBINATION 'III-6R' 'Viento M ximo angular 45§ (Verticales reducidas)' - SPECIFICATIONS 'DL' 2. '*III-R' 1.5 - '*V45' 1.5 '*V45-6' 1.5 $ $ $ HIPOTESIS DE VIENTO SOBRE TORRE CON EXTENSION +9 $ LOAD COMBINATION 'I-9' 'Viento M ximo Transversal 90§' - SPECIFICATIONS 'DL' 2. '*I' 1.5 - '*VT' 1.5 '*VT9' 1.5 $

32/117


LOAD COMBINATION 'II-9' 'Viento M ximo Longitudinal' - SPECIFICATIONS 'DL' 2. '*II' 1.5 - '*VL' 1.5 '*VL9' 1.5 $ LOAD COMBINATION 'III-9' 'Viento M ximo angular 45§' - SPECIFICATIONS 'DL' 2. '*III' 1.5 - '*V45' 1.5 '*V45-9' 1.5 $ LOAD COMBINATION 'I-9R' 'Viento M ximo Transversal 90§ (Verticales reducidas)' - SPECIFICATIONS 'DL' 2. '*I-R' 1.5 - '*VT' 1.5 '*VT9' 1.5 $ LOAD COMBINATION 'II-9R' 'Viento M ximo Longitudinal (Verticales reducidas)' - SPECIFICATIONS 'DL' 2. '*II-R' 1.5 - '*VL' 1.5 '*VL9' 1.5 $ LOAD COMBINATION 'III-9R' 'Viento M ximo angular 45§ (Verticales reducidas)' - SPECIFICATIONS 'DL' 2. '*III-R' 1.5 - '*V45' 1.5 '*V45-9' 1.5 $ $ $ HIPOTESIS DE VIENTO SOBRE TORRE CON EXTENSION +12 $ LOAD COMBINATION 'I-12' 'Viento M ximo Transversal 90§' - SPECIFICATIONS 'DL' 2. '*I' 1.5 - '*VT' 1.5 '*VT12' 1.5 $ LOAD COMBINATION 'II-12' 'Viento M ximo Longitudinal' - SPECIFICATIONS 'DL' 2. '*II' 1.5 - '*VL' 1.5 '*VL12' 1.5 $ LOAD COMBINATION 'III-12' 'Viento M ximo angular 45§' - SPECIFICATIONS 'DL' 2. '*III' 1.5 - '*V45' 1.5 '*V45-12' 1.5 $ LOAD COMBINATION 'I-12R' 'Viento M ximo Transversal 90§ (Verticales reducidas)' -

33/117


SPECIFICATIONS 'DL' 2. '*I-R' 1.5 - '*VT' 1.5 '*VT12' 1.5 $ LOAD COMBINATION 'II-12R' 'Viento M ximo Longitudinal (Verticales reducidas)' - SPECIFICATIONS 'DL' 2. '*II-R' 1.5 - '*VL' 1.5 '*VL12' 1.5 $ LOAD COMBINATION 'III-12R' 'Viento M ximo angular 45§ (Verticales reducidas)' - SPECIFICATIONS 'DL' 2. '*III-R' 1.5 - '*V45' 1.5 '*V45-12' 1.5 $ $ $ LOAD COMBINATION 'IVx1-0' 'Amarre temporal 0§' - SPECIFICATIONS 'DL' 1.6 '*IVx1-0' 1.2 $ LOAD COMBINATION 'IVx2-0' 'Amarre temporal 0§' - SPECIFICATIONS 'DL' 1.6 '*IVx2-0' 1.2 $ LOAD COMBINATION 'IVx2-30' 'Amarre temporal 30§' - SPECIFICATIONS 'DL' 1.6 '*IVx2-30' 1.2 $ LOAD COMBINATION 'Vg' 'Tendido (0§ - OPGW)' - SPECIFICATIONS 'DL' 2.3 '*Vg' 1.7 $ LOAD COMBINATION 'Vs' 'Tendido ( 0§ - Fase sup.)' - SPECIFICATIONS 'DL' 2.3 '*Vs' 1.7 $ LOAD COMBINATION 'Vi' 'Tendido ( 0§ - Fase inf.)' - SPECIFICATIONS 'DL' 2.3 '*Vi' 1.7 $ LOAD COMBINATION 'VIg' 'Mantenimiento ( OPGW 30§ )' - SPECIFICATIONS 'DL' 2.3 '*VIg' 1.7 $ LOAD COMBINATION 'VIfs' 'Mantenimiento ( Fase sup. 30§ )' - SPECIFICATIONS 'DL' 2.3 '*VIfs' 1.7

34/117


$ LOAD COMBINATION 'VIfi' 'Mantenimiento ( Fase inf. 30§ )' - SPECIFICATIONS 'DL' 2.3 '*VIfi' 1.7 $ LOAD COMBINATION 'VIg2' 'Mantenimiento ( OPGW 30§ )' - SPECIFICATIONS 'DL' 2.3 '*VIg2' 1.7 $ LOAD COMBINATION 'VIfs2' 'Mantenimiento ( Fase sup. 30§ )' - SPECIFICATIONS 'DL' 2.3 '*VIfs2' 1.7 $ LOAD COMBINATION 'VIfi2' 'Mantenimiento ( Fase inf. 30§ )' - SPECIFICATIONS 'DL' 2.3 '*VIfi2' 1.7 $ $

35/117

1 / 4 TMD-graf

4 Esquemas de deformadas

XY

Z

TMD TC P8 - Hip. I x20

36/117

2 / 4 TMD-graf

XY

Z

TMD E12 P8/P2 - Hip. I x20

37/117

3 / 4 TMD-graf

XY

Z

XY

Z

TMD E12 P8 - Hip. IVx1-0 x20

38/117

4 / 4 TMD-graf

XY

Z

XY

Z

TMD E12 P8 - Hip. IVx2-0 x20

39/117

Fuerzas [kg]

28/12/07 11:32TMD 2x230kV SIEPAC - Rev.D - Retención (TMD)500012.7BulonesDIMENSIONAMIENTO ASCE 10-97500015.88disponibles: B U L O N E S+- alas abulonadas Fu Fy [kg/cm²]500019.05 Diám. [mm] F adm.cor.= 0.62Fu/1.13+--(_) = 1 ala abulonada (interm.)+37002400 m ó (_):50000 y+s ó (_)= simple\_/aplast.---- +- x Nº bulones, para sección tracción|+|---------45753515 h:50000 Fu [kg/cm²]|+ d = doble / \corte---- +--(_) = 1.0 x N° bulones, para secc.tracc.||+00 hh:

|| |||bulón %ØssFefec kg/cm² FadmKL/r Area cm²radio Medidasb'/tL/r% capacidabul.curLongiejeFy BARRAS

Fapl.Fcor.necusad.dd trac compkg/cm²traccomp cm mm x mmcomp.trac. va cmx\ntrac./hip.comp./hip. trac. comp.

49.740.3112.7 4984017771612.473.490.87 L45x4 8.51612152 24140n VIg-11232VIg-1-1400C-1C-274.674.9212.7 26845005441921.943.490.87 L45x4 H8.51927692 14167nhVIg2-15203I-12R-1-1746CX-4CX-371.872.0312.7 651159518871033.154.711.83 L60x4 H121031984 11188xhII-12R-12052Vg-1-7510CX-7CX-653.353.5212.7 16912599601452.23.891.52 L50x4 H9.751454827 14220xhVg-13717I-12R-1-1009CT-1CT-332.732.8112.7 1982939601451.863.891.52 L50x4 H9.75145631 14220xhI-12R-1368VIg2-1-1140CL-2CL-188.371.7112.7 15186938951501.643.490.87 L45x4 8.51506377 14130n VIg-12490VIg-1-2418CDT-2CDT-136.154.3212.7 4265479851435.396.911.82 L60x6 H7.671431255 24260xhVIg-12293VIg-1-3777MS-101MS-10240.761.3212.7 4346169851435.396.911.82 L60x6 H7.671431263 24260xhI-0R-172335Vg-1-4260MS-107MS-10653.981.1312.7 70312242473825.396.911.82 L60x6 H7.67822049 21150xhVIg-13785VIfs-1-8457MS-201MS-20254.181.4312.7 75412282473825.396.911.82 L60x6 H7.67822150 21150xhI-0R-174061VIfs-1-8486MS-207MS-20666.399.8312.7 8459822458809.0810.62.76 L90x6 H12.2802440 21220xhIVx1-0-27667VIfs-1-10406MS-304MS-30256.985.6412.7 90711232458809.0810.62.76 L90x6 H12.2802646 21220xhI-0R-158227IVx1-0-15-11904MS-307MS-30665.197.9512.7 147216062458809.0810.62.76 L90x6 H12.2804265 21220xhI-0R-1513362I-12-1-17019MS-311MS-30957.987.1612.7 159517142458809.0810.62.76 L90x6 H12.2804570 21220xhI-0R-1514473I-12-1-18168MS-315MS-31364.296.6712.7 203122162927549.0810.62.76 L90x6 H12.2545876 21150xhI-0R-1518438I-12-1-23492MS-403MS-40175.090.2515.9 222223112927548.710.62.76 L90x6 H12.2546379 21150xhI-0R-1519324I-12-1-24499MS-407MS-40546.392.9615.9 159815772712721619.23.04 L100x10 H7.8724558 21220xhI-3R-1325611I-3-12-30271MS-503MS-50136.992.71012.7 1648167727127216.719.23.04 L100x10 H7.8724762 21220xhI-12R-227456I-3-12-32200MS-507MS-50537.794.51312.7 2181222430275616.719.21.95 L100x10 H7.8566273 21110nhI-12R-236339I-12-1-42708MS-511MS-50939.498.81312.7 2292232530275616.719.21.95 L100x10 H7.8566577 21110nhI-12R-238184I-12-1-44645MS-515MS-51348.396.81015.9 280727383141491619.23.04 L100x10 H7.8498087 21150xhI-12R-244987I-3-12-52570MS-603MS-60149.799.61015.9 289628183141491619.23.04 L100x10 H7.8498290 21150xhI-12R-246411I-3-12-54096MS-607MS-60557.846.9112.7 9934595251961.643.490.87 L45x4 8.51964187 14170n Vg-21629Vg-2-1602DTS-103DTS-10293.976.2212.7 1901112414601152.734.711.18 L60x4 121137977 12133n VIfs-25192VIfs-1-5296DTS-203DTS-20480.865.5212.7 138196711571322.734.711.18 L60x4 121325884 14156n I-12R-13771I-0-15-4554DTS-301DTS-30380.865.5212.7 166780111571322.734.711.18 L60x4 121326969 14156n I-0-154554I-12R-1-3771DTS-312DTS-31099.280.5212.7 204784214601152.734.711.18 L60x4 121138558 12133n IVx1-0-15592IVx1-0-1-3967DTS-403DTS-40485.169.0215.9 1785118813441223.596.311.28 L65x5 10.21227488 14156n I-3R-126401I-12-2-7497DTS-501DTS-50385.169.0215.9 2091101413441223.596.311.28 L65x5 10.21228775 14156n I-12-27497I-3R-12-6401DTS-512DTS-51089.672.7215.9 2202105715661083.596.311.28 L65x5 10.21049267 12133n IVx1-0-87896I-9-8-6667DTS-603DTS-60257.246.4112.7 9804625251961.643.490.87 L45x4 8.51964188 14170n IVx1-0-11607IVx1-0-1-1612DLS-103DLS-10257.246.4112.7 9834605251961.643.490.87 L45x4 8.51964188 14170n IVx1-0-11612IVx1-0-1-1607DLS-106DLS-10756.445.8112.7 11065166911711.413.080.78 L40x4 7.51714675 14133n IVx1-0-11564IVx1-0-1-1590DLS-203DLS-20256.445.8112.7 11245086911711.413.080.78 L40x4 7.51714774 14133n IVx1-0-11590IVx1-0-1-1564DLS-206DLS-20799.880.1115.9 193492411571322.244.711.18 L60x4 H121325580 14156nhIVx1-0-154335IVx1-0-15-4350DLS-303DLS-30299.880.1115.9 194192011571322.244.711.18 L60x4 H121325580 14156nhIVx1-0-154350IVx1-0-15-4335DLS-306DLS-30799.880.1115.9 193492411571322.244.711.18 L60x4 H121325580 14156nhIVx1-0-154335IVx1-0-15-4350DLS-314DLS-31588.571.0115.9 212299110901361.793.890.98 L50x4 H9.751366091 14133nhIVx1-0-153799IVx1-0-15-3856DLS-403DLS-40288.571.0115.9 215497710901361.793.890.98 L50x4 H9.751366190 14133nhIVx1-0-153856IVx1-0-15-3799DLS-406DLS-40781.466.0215.9 2000113613431223.596.311.28 L65x5 10.21228385 14156n IVx1-0-27171IVx1-0-2-7168DLS-503DLS-50281.466.0215.9 1999113613441223.596.311.28 L65x5 10.21228385 14156n IVx1-0-27168IVx1-0-2-7171DLS-506DLS-50781.466.0215.9 2000113613431223.596.311.28 L65x5 10.21228385 14156n IVx1-0-27171IVx1-0-2-7168DLS-514DLS-51571.057.0215.9 2322131414841162.654.711.18 L60x4 H121136689 13133nhIVx1-0-26149IVx1-0-2-6191DLS-603DLS-60271.057.0215.9 2337130614841162.654.711.18 L60x4 H121136688 13133nhIVx1-0-26191IVx1-0-2-6149DLS-606DLS-60772.973.1212.7 598107813911202.734.711.83 L60x4 H121201777 14220xhII-12R-21634Vg-1-5079TTS-8TTS-6

5. D I M E N S I O N A M I E N T O

1 / 6 Rev.D

40/117

Fuerzas [kg]




86.269.2215.9 28361535791862.654.711.18 L60x4 H121868126 14220nhVs-17511I-12R-1-719TTS-111TTS-10963.276.0215.9 313119513761213.876.911.82 L60x6 H7.67121987 14220xhI-0R-151212Vs-15-8257TTS-211TTS-21067.053.7215.9 22031625791862.654.711.18 L60x4 H121866328 14220nhVs-125835II-3R-13-761TTS-317TTS-31940.348.51215.9 25776313761213.876.911.82 L60x6 H7.67121755 14220xhI-12R-2996Vg-12-5270TTS-411TTS-41182.866.5215.9 27252335791862.654.711.18 L60x4 H121867840 14220nhVi-87217II-9R-9-1095TTS-519TTS-51979.896.0215.9 521138514991164.287.531.97 L65x6 H8.331121592 13220xhI-9R-92228Vi-8-10430TTS-612TTS-61045.545.6112.7 112014110111411.413.080.78 L40x4 H7.51413214 14110nhVg-11585II-12R-1-435TLS-6TLS-778.178.4112.7 1637009601451.863.891.52 L50x4 H9.75145573 14220xhI-12R-1304Vs-2-2723TLS-109TLS-11192.993.2112.7 229028710111411.413.080.78 L40x4 H7.51416528 14110nhVs-13240I-12R-2-883TLS-210TLS-21255.655.7112.7 1734989601451.863.891.52 L50x4 H9.75145552 14220xhIVx1-0-15321Vs-15-1937TLS-317TLS-31868.768.9112.7 169328810111411.413.080.78 L40x4 H7.51414828 14110nhIVx1-0-152395I-12R-1-886TLS-410TLS-41278.879.0112.7 2307069601451.863.891.52 L50x4 H9.75145774 14220xhIVx1-0-9428Vi-8-2745TLS-517TLS-51970.871.0215.9 2104122218881033.596.311.28 L65x5 H10.2866065 13110nhI-9-87546I-9R-8-7713TLS-611TLS-60919.419.5112.7 4131946291791.643.490.87 L45x4 H8.51791231 14156nhIVx1-0-1678IVx1-0-1-678DKS-6DKS-531.731.8112.7 6753156291791.643.490.87 L45x4 H8.51791950 14156nhIVx1-0-151106IVx1-0-15-1100DKS-212DKS-20930.530.6112.7 6493046291791.643.490.87 L45x4 H8.51791848 14156nhIVx1-0-21064IVx1-0-2-1060DKS-412DKS-40940.140.2112.7 8523956291791.643.490.87 L45x4 H8.51792463 14156nhIVx1-0-11397IVx1-0-1-1379DKS-612DKS-61176.776.9412.7 29952537801613.574.711.83 L60x4 H121618532 14294xhVs-210696I-12R-1-1194ACS-203ACS-20154.654.73412.7 21302687801613.574.711.83 L60x4 H121616134 14294xhVs-157608IVx1-0-15-1262BCS-402BCS-40180.680.8412.7 31463727861603.574.711.83 L60x4 H121608947 14293xhVi-811236IVx1-0-9-1751CCS-603CCS-60160.873.1315.9 72817242417854.476.911.82 L60x6 H7.67852171 11154xhI-12R-23252Vs-1-11915ACI-212ACI-21045.054.12315.9 73112762417854.476.911.82 L60x6 H7.67852153 11154xhI-9R-83265IVx1-0-15-8818BCI-412BCI-41063.476.3315.9 74018002310894.476.911.82 L60x6 H7.67892178 11161xhI-3R-123306Vi-13-12435CCI-612CCI-61048.492.31215.9 2537258030475520.323.32.51 L127x9.5 H11347285 2284nhI-9R-951461I-9-8-60120MC-703MC-70150.996.91215.9 2653271130905320.323.32.51 L127x9.5 H11537588 21132nhI-3R-1253823I-3-12-63155MC-707MC-70587.183.0715.9 d2620270731694820.323.32.51 L127x9.5 H11487585 21119nhI-9R-853134I-0-15-63065MC-711MC-70967.986.6715.9 d2061214724578326.630.72.5 L127x12.7 H8835987 21208nhI-3R-1254868I-0-15-65797MC-715MC-71389.990.2215.9 2661168318461043.275.821.82 L60x5 H9.4997691 12180xhIVx1-0-98692IVx1-0-13-9793DTC-701DTC-70271.671.8215.9 2386119513041243.275.821.82 L60x5 H9.41246892 14226xhIVx1-0-137795IVx1-0-9-6954DTC-705DTC-70688.689.9212.7 137091311481324.036.842.14 L70x5 11.21325780 14283x IVx1-0-95524IVx1-0-13-6245DTC-709DTC-71070.271.2212.7 12276507311664.036.842.14 L70x5 11.21665189 14355x IVx1-0-134948IVx1-0-9-4444DTC-713DTC-71463.263.4215.9 1941118318461043.275.821.82 L60x5 H9.4995564 12180xhIVx1-0-86340IVx1-0-12-6888DLC-702DLC-70350.350.4215.9 167687313041243.275.821.82 L60x5 H9.41244867 14226xhIVx1-0-125477IVx1-0-8-5078DLC-706DLC-70762.463.2212.7 99864311481324.036.842.14 L70x5 11.21324256 14283x IVx1-0-84027IVx1-0-12-4396DLC-710DLC-71149.350.01212.7 8614757311664.036.842.14 L70x5 11.21663665 14355x IVx1-0-123472IVx1-0-8-3249DLC-714DLC-71593.493.7112.7 11626919141482.314.711.83 L60x4 H121483376 14271xhIVx1-0-152684IVx1-0-15-3255TT-717TT-71867.667.8112.7 8335009141482.314.711.83 L60x4 H121482455 14271xhIVx1-0-141925IVx1-0-14-2355TL-720TL-71970.189.3715.9 d1066221431494926.630.72.5 L127x12.7 H8493070 21122nhIVx2-0-1528382I-0-15-67864MP2-804MP2-80169.688.7715.9 d1017220127717026.630.72.5 L127x12.7 H8702979 21174nhIVx2-0-1627073I-0-16-67451MP3-804MP3-80169.288.2715.9 d970218829885926.630.72.5 L127x12.7 H8592873 21147nhIVx2-0-1725827I-0-17-67061MP4-804MP4-80168.987.8715.9 d928217626917326.630.72.5 L127x12.7 H8732681 21183nhIVx2-0-1824696I-0-18-66705MP5-804MP5-80168.587.3715.9 d888216528476626.630.72.5 L127x12.7 H8662576 21165nhIVx2-0-1923635I-0-19-66372MP6-804MP6-80168.286.9715.9 d851215526077726.630.72.5 L127x12.7 H8772483 21192nhIVx2-0-2022657I-0-20-66063MP7-804MP7-80167.986.5715.9 d1969214627976826.630.72.5 L127x12.7 H8685677 21171nhI-0R-1452398I-0-14-65774MP8-803MP8-80180.281.4212.7 80597113161233.375.821.17 L60x5 9.41233474 14144n IVx1-0-152714IVx1-0-15-5654DTP2-804DTP2-801


2 / 6 Rev.D

41/117

Fuerzas [kg]




82.683.8212.7 68285110971354.036.841.38 L70x5 11.21352878 14187n IVx1-0-162751IVx1-0-16-5823DTP3-804DTP3-80185.586.7212.7 69388112811254.036.841.38 L70x5 11.21252969 14173n IVx1-0-172796IVx1-0-17-6028DTP4-804DTP4-80188.689.8212.7 65384810761374.377.361.48 L75x5 121372779 14202n IVx1-0-182854IVx1-0-18-6243DTP5-804DTP5-80191.392.6212.7 71994112491274.036.841.38 L70x5 11.21273075 14175n IVx1-0-192902IVx1-0-19-6434DTP6-804DTP6-80193.895.1212.7 67489811141344.377.361.48 L75x5 121342881 14199n IVx1-0-202947IVx1-0-20-6608DTP7-804DTP7-80195.997.3212.7 143891910831364.377.362.29 L75x5 121366085 14312x IVx1-0-146284IVx1-0-14-6760DTP8-802DTP8-80171.572.5112.7 61443313161232.855.821.17 L60x5 9.41232633 14144n IVx1-0-151750IVx1-0-15-2520DLP2-801DLP2-80480.581.6112.7 64941510971353.416.841.38 L70x5 11.21352738 14187n IVx1-0-162217IVx1-0-16-2836DLP3-801DLP3-80492.093.3112.7 78847412811253.416.841.38 L70x5 11.21253337 14173n IVx1-0-172689IVx1-0-17-3243DLP4-801DLP4-80452.052.7212.7 71949810761374.377.361.48 L75x5 121373046 14202n IVx1-0-183144IVx1-0-18-3664DLP5-801DLP5-80458.058.8212.7 89059812491274.036.841.38 L70x5 11.21273748 14175n IVx1-0-193591IVx1-0-19-4090DLP6-801DLP6-80463.964.8212.7 91961211141344.377.361.48 L75x5 121343855 14199n IVx1-0-204016IVx1-0-20-4501DLP7-801DLP7-80475.276.2212.7 110372010831364.377.362.29 L75x5 121364667 14312x IVx1-0-144823IVx1-0-14-5299DLP8-803DLP8-80269.488.4715.9 d1969219332614126.630.72.5 L127x12.7 H8415667 21102nhI-3R-1252416I-3-13-67211E3M-719E3M-71770.389.6715.9 d1961222232614126.630.72.5 L127x12.7 H8415668 21102nhI-3R-1252192I-3-13-68092E3M-723E3M-72191.474.1115.9 8656386891713.036.311.98 L65x5 10.21713693 14338x IVx1-0-132623IVx1-0-13-4026E3DT-717E3DT-71883.884.1112.7 15702646061821.863.891.52 L50x4 H9.751824544 14277xhIVx1-0-132921IVx1-0-13-1026E3DT-721E3DT-72491.291.5112.7dd151491119821003.566.981.36 2L45x4 H8.5804346 13109nhIVx1-0-125389IVx1-0-12-6359E3DT-726E3DT-72565.653.2115.9 7104586891713.036.311.98 L65x5 10.21713066 14338x IVx1-0-122154IVx1-0-12-2890E3DL-720E3DL-71941.241.3112.7 7721896061821.863.891.52 L50x4 H9.751822231 14277xhIVx1-0-131435IVx1-0-13-734E3DL-724E3DL-72170.170.3112.7dd119670019821003.566.981.36 2L45x4 H8.5803435 13109nhIVx1-0-124257IVx1-0-12-4888E3DL-727E3DL-72681.081.3112.7 5617268681521.863.890.98 L50x4 H9.751521684 14149nhIVx1-0-131043IVx1-0-13-2824E3TT-724E3TT-72139.439.5112.7 4093538681521.863.890.98 L50x4 H9.751521241 14149nhIVx1-0-13760IVx1-0-13-1372E3TL-721E3TL-72471.290.8715.9 d1007225131494926.630.72.5 L127x12.7 H8492971 21122nhIVx2-0-1326809I-3-13-689913P2-8043P2-8010.00.0115.9 d0027717026.630.72.5 L127x12.7 H87000 21174nhI-12-10I-12-103P3-8013P3-8010.00.0115.9 d0029885926.630.72.5 L127x12.7 H85900 21147nhI-12-10I-12-103P4-8013P4-8010.00.0115.9 d0026917326.630.72.5 L127x12.7 H87300 21183nhI-12-10I-12-103P5-8013P5-8010.00.0115.9 d0028476626.630.72.5 L127x12.7 H86600 21165nhI-12-10I-12-103P6-8013P6-8010.00.0115.9 d0026077726.630.72.5 L127x12.7 H87700 21192nhI-12-10I-12-103P7-8013P7-80168.387.0715.9 d1927215827976826.630.72.5 L127x12.7 H8685577 21171nhI-3R-1251296I-3-12-661463P8-8033P8-80169.270.1212.7 63983813161233.375.821.17 L60x5 9.41232764 14144n IVx1-0-132154IVx1-0-13-48753TP2-8043TP2-8010.00.0112.7 0010971353.416.841.38 L70x5 11.213500 14187n I-12-10I-12-103TP3-8013TP3-8010.00.0112.7 0012811253.416.841.38 L70x5 11.212500 14173n I-12-10I-12-103TP4-8013TP4-8010.00.0112.7 0010761373.77.361.48 L75x5 1213700 14202n I-12-10I-12-103TP5-8013TP5-8010.00.0112.7 0012491273.416.841.38 L70x5 11.212700 14175n I-12-10I-12-103TP6-8013TP6-8010.00.0112.7 0011141343.77.361.48 L75x5 1213400 14199n I-12-10I-12-103TP7-8013TP7-80192.894.2212.7 119688910831364.377.362.29 L75x5 121365082 14312x IVx1-0-125230IVx1-0-12-65443TP8-8023TP8-80163.464.3112.7 57538413161232.855.821.17 L60x5 9.41232429 14144n IVx1-0-131639IVx1-0-13-22333LP2-8013LP2-8040.00.0112.7 0010971353.416.841.38 L70x5 11.213500 14187n I-12-10I-12-103LP3-8013LP3-8010.00.0112.7 0012811253.766.841.38 L70x5 11.21250014173n I-12-10I-12-103LP4-8013LP4-8010.00.0112.7 0010761374.057.361.48 L75x5 121370014202n I-12-10I-12-103LP5-8013LP5-8010.00.0112.7 0012491273.766.841.38 L70x5 11.21270014175n I-12-10I-12-103LP6-8013LP6-8010.00.0112.7 0011141344.057.361.48 L75x5 121340014199n I-12-10I-12-103LP7-8013LP7-80171.972.9212.7 85668910831364.787.362.29 L75x5 12136366414312x IVx1-0-124094IVx1-0-12-50693LP8-8033LP8-80269.087.9715.9 d1721218028106830.730.72.5 L127x12.7 H868497821169nhI-6R-1052762I-6-11-66802E6M-719E6M-717


3 / 6 Rev.D

42/117

Fuerzas [kg]




71.691.2715.9 d1725226132614130.730.72.5 L127x12.7 H841496921102nhI-6R-1052870I-6-11-69303E6M-731E6M-72975.873.8115.9 5844585331944.818.751.47 L75x6 9.83194248614286n IVx1-0-112809IVx1-0-11-4009E6DT-717E6DT-71843.143.3112.7 7032896061822.143.891.52 L50x4 H9.75182204814277xhIVx1-0-111503IVx1-0-10-1124E6DT-729E6DT-72980.780.9112.7dd145680617401083.846.981.36 2L45x4 H8.595414613129nhIVx1-0-105589IVx1-0-10-5626E6DT-734E6DT-73354.853.4115.9 4613315331944.818.751.47 L75x6 9.83194196214286n IVx1-0-102219IVx1-0-10-2899E6DL-720E6DL-71934.734.9112.7 5662156061822.143.891.52 L50x4 H9.75182163514277xhIVx1-0-101211IVx1-0-10-835E6DL-731E6DL-73063.063.2112.7dd11346292211923.846.982.01 2L45x4 H8.564322813129xhIVx1-0-104354IVx1-0-10-4390E6DL-735E6DL-73485.168.3115.9 173384710531382.143.890.98 L50x4 H9.75138498014135nhIVx1-0-103707IVx1-0-10-3296E6TT-729E6TT-73064.751.9115.9 131767910531382.143.890.98 L50x4 H9.75138376414135nhIVx1-0-102818IVx1-0-10-2641E6TL-730E6TL-73172.592.4715.9 d857229031494930.730.72.5 L127x12.7 H849247321122nhIVx2-0-1126282I-6-11-702006P2-8046P2-8010.00.0115.9 d0027717030.730.72.5 L127x12.7 H8700021174nhI-12-10I-12-106P3-8016P3-8010.00.0115.9 d0029885930.730.72.5 L127x12.7 H8590021147nhI-12-10I-12-106P4-8016P4-8010.00.0115.9 d0026917330.730.72.5 L127x12.7 H8730021183nhI-12-10I-12-106P5-8016P5-8010.00.0115.9 d0028476626.630.72.5 L127x12.7 H86600 21165nhI-12-10I-12-106P6-8016P6-8010.00.0115.9 d0026077726.630.72.5 L127x12.7 H87700 21192nhI-12-10I-12-106P7-8016P7-80170.389.5715.9 d1953222127976826.630.72.5 L127x12.7 H8685679 21171nhI-6R-1051973I-6-10-680676P8-8036P8-80157.958.7212.7 56970113161233.375.821.17 L60x5 9.41232453 14144n IVx1-0-111917IVx1-0-11-40806TP2-8046TP2-8010.00.0112.7 0010971353.416.841.38 L70x5 11.213500 14187n I-12-10I-12-106TP3-8016TP3-8010.00.0112.7 0012811253.416.841.38 L70x5 11.212500 14173n I-12-10I-12-106TP4-8016TP4-8010.00.0112.7 0010761373.77.361.48 L75x5 1213700 14202n I-12-10I-12-106TP5-8016TP5-8010.00.0112.7 0012491273.416.841.38 L70x5 11.212700 14175n I-12-10I-12-106TP6-8016TP6-8010.00.0112.7 0011141343.77.361.48 L75x5 1213400 14199n I-12-10I-12-106TP7-8016TP7-80178.879.9212.7 118475510831364.377.362.29 L75x5 121364970 14312x IVx1-0-105176IVx1-0-10-55566TP8-8026TP8-80156.056.8112.7 53133913161232.855.821.17 L60x5 9.41232226 14144n IVx1-0-111515IVx1-0-11-19756LP2-8016LP2-8040.00.0112.7 0010971353.416.841.38 L70x5 11.213500 14187n I-12-10I-12-106LP3-8016LP3-8010.00.0112.7 0012811253.416.841.38 L70x5 11.212500 14173n I-12-10I-12-106LP4-8016LP4-8010.00.0112.7 0010761373.77.361.48 L75x5 1213700 14202n I-12-10I-12-106LP5-8016LP5-8010.00.0112.7 0012491273.416.841.38 L70x5 11.212700 14175n I-12-10I-12-106LP6-8016LP6-8010.00.0112.7 0011141343.77.361.48 L75x5 1213400 14199n I-12-10I-12-106LP7-8016LP7-80162.162.9212.7 91459410831364.377.362.29 L75x5 121363855 14312x IVx1-0-103994IVx1-0-10-43746LP8-8036LP8-80269.288.1715.9 d2006218628106826.630.72.5 L127x12.7 H8685778 21169nhI-9R-853386I-9-9-67004E9M-719E9M-71772.191.8715.9 d2011227730345626.630.72.5 L127x12.7 H8565775 21140nhI-9R-853518I-9-9-69780E9M-731E9M-72972.692.5715.9 d1984229531185126.630.72.5 L127x12.7 H8515674 21127nhI-9R-852804I-9-9-70339E9M-739E9M-73798.199.5112.7 8924705461923.77.362.29 L75x5 121923786 14439x IVx1-0-93298IVx1-0-9-3458E9DT-717E9DT-71877.278.3112.7 7363645501913.77.362.29 L75x5 121913166 14438x IVx1-0-92722IVx1-0-9-2677E9DT-729E9DT-73052.953.1112.7 9923765761871.863.891.52 L50x4 H9.751872865 14284xhIVx1-0-81845IVx1-0-8-1464E9DT-738E9DT-73774.274.5112.7dd144974112171293.566.981.36 2L45x4 H8.51294161 14175nhIVx1-0-85158IVx1-0-8-5176E9DT-742E9DT-74176.577.6112.7 6353665461923.77.362.29 L75x5 121922667 14439x IVx1-0-82350IVx1-0-8-2696E9DL-718E9DL-71960.060.8112.7 5712615501913.77.362.29 L75x5 121912447 14438x IVx1-0-82113IVx1-0-8-1920E9DL-730E9DL-73142.943.0112.7 8042805761871.863.891.52 L50x4 H9.751872349 14284xhIVx1-0-81495IVx1-0-8-1088E9DL-739E9DL-73858.358.5112.7dd114357312171293.566.981.36 2L45x4 H8.51293347 14175nhIVx1-0-84067IVx1-0-8-4002E9DL-743E9DL-74249.549.7112.7 7694445481921.863.890.98 L50x4 H9.751922281 14188nhIVx1-0-81430IVx1-0-8-1725E9TT-737E9TT-73839.940.0112.7 5763585481921.863.890.98 L50x4 H9.751921665 14188nhIVx1-0-81071IVx1-0-8-1391E9TL-738E9TL-73973.693.7715.9 d957232431494926.630.72.5 L127x12.7 H8492774 21122nhIVx2-0-925482I-9-9-712439P2-8049P2-8010.00.0115.9 d0027717026.630.72.5 L127x12.7 H87000 21174nhI-12-10I-12-109P3-8019P3-801


4 / 6 Rev.D

43/117

Fuerzas [kg]




0.00.0115.9 d0029885926.630.72.5 L127x12.7 H85900 21147nhI-12-10I-12-109P4-8019P4-8010.00.0115.9 d0026917326.630.72.5 L127x12.7 H87300 21183nhI-12-10I-12-109P5-8019P5-8010.00.0115.9 d0028476626.630.72.5 L127x12.7 H86600 21165nhI-12-10I-12-109P6-8019P6-8010.00.0115.9 d0026077726.630.72.5 L127x12.7 H87700 21192nhI-12-10I-12-109P7-8019P7-80171.090.4715.9 d1950224227976826.630.72.5 L127x12.7 H8685580 21171nhI-9R-851901I-9-8-687129P8-8039P8-80151.552.2212.7 51962313161233.375.821.17 L60x5 9.41232247 14144n IVx1-0-91750IVx1-0-9-36279TP2-8049TP2-8010.00.0112.7 0010971353.416.841.38 L70x5 11.213500 14187n I-12-10I-12-109TP3-8019TP3-8010.00.0112.7 0012811253.416.841.38 L70x5 11.212500 14173n I-12-10I-12-109TP4-8019TP4-8010.00.0112.7 0010761373.77.361.48 L75x5 1213700 14202n I-12-10I-12-109TP5-8019TP5-8010.00.0112.7 0012491273.416.841.38 L70x5 11.212700 14175n I-12-10I-12-109TP6-8019TP6-8010.00.0112.7 0011141343.77.361.48 L75x5 1213400 14199n I-12-10I-12-109TP7-8019TP7-80172.373.3212.7 109069210831364.377.362.29 L75x5 121364564 14312x IVx1-0-84763IVx1-0-8-50979TP8-8029TP8-80151.352.0112.7 48831013161232.855.821.17 L60x5 9.41232024 14144n IVx1-0-91393IVx1-0-9-18069LP2-8019LP2-8040.00.0112.7 0010971353.416.841.38 L70x5 11.213500 14187n I-12-10I-12-109LP3-8019LP3-8010.00.0112.7 0012811253.416.841.38 L70x5 11.212500 14173n I-12-10I-12-109LP4-8019LP4-8010.00.0112.7 0010761373.77.361.48 L75x5 1213700 14202n I-12-10I-12-109LP5-8019LP5-8010.00.0112.7 0012491273.416.841.38 L70x5 11.212700 14175n I-12-10I-12-109LP6-8019LP6-8010.00.0112.7 0011141343.77.361.48 L75x5 1213400 14199n I-12-10I-12-109LP7-8019LP7-80156.457.2212.7 85154010831364.377.362.29 L75x5 121363550 14312x IVx1-0-83722IVx1-0-8-39779LP8-8039LP8-80269.188.1715.9 d1994218428106826.630.72.5 L127x12.7 H8685778 21169nhI-12R-153088I-12-2-6694812M-71912M-71772.191.8715.9 d2019227725837826.630.72.5 L127x12.7 H8785788 21195nhI-12R-153754I-12-2-6980512M-73112M-72973.093.1715.9 d1993230831185126.630.72.5 L127x12.7 H8515774 21127nhI-12R-153043I-12-2-7074312M-74712M-74569.868.0115.9 7104225411934.298.752.28 L75x6 9.831933078 14439x IVx1-0-23043IVx1-0-2-369112DT-71712DT-71866.981.5112.7 5232315561905.4110.62.76 L90x6 12.21902242 14525x IVx1-0-22831IVx1-0-2-245312DT-72912DT-73071.171.3112.7 12014966951702.064.261.67 L55x4 H10.81703471 14284xhIVx1-0-12479IVx1-0-1-211312DT-74612DT-74573.273.5112.7dd14167328871513.566.981.36 2L45x4 H8.51514082 14205nhIVx1-0-15040IVx1-0-1-510612DT-75012DT-74953.151.7115.9 5253215411934.298.752.28 L75x6 9.831932259 14439x IVx1-0-12251IVx1-0-1-281012DL-72012DL-71950.661.5112.7 3951735561905.4110.62.76 L90x6 12.21901631 14525x IVx1-0-12139IVx1-0-1-183112DL-73012DL-72956.256.4112.7 9493756951702.064.261.67 L55x4 H10.81702754 14284xhIVx1-0-11959IVx1-0-1-159712DL-74712DL-74656.857.0112.7dd10985688871513.566.981.36 2L45x4 H8.51513164 14205nhIVx1-0-13910IVx1-0-1-396212DL-75112DL-75099.279.6115.9 163691810111412.244.711.18 L60x4 H121414791 14166nhIVx1-0-13668IVx1-0-1-432412TT-74512TT-74678.463.0115.9 126072610111412.244.711.18 L60x4 H121413672 14166nhIVx1-0-12823IVx1-0-1-341812TL-74612TL-74774.094.3715.9 d939233831494926.630.72.5 L127x12.7 H8492774 21122nhIVx2-0-224983I-12-2-7164712P2-80412P2-80173.593.6715.9 d907232227717026.630.72.5 L127x12.7 H8702684 21174nhIVx2-0-324129I-12-3-7118312P3-80412P3-80173.193.1715.9 d876230929885926.630.72.5 L127x12.7 H8592577 21147nhIVx2-0-423327I-12-4-7077912P4-80412P4-80172.792.6715.9 d848229826917326.630.72.5 L127x12.7 H8732485 21183nhIVx2-0-522583I-12-5-7042012P5-80412P5-80172.492.2715.9 d822228728476626.630.72.5 L127x12.7 H8662380 21165nhIVx2-0-621882I-12-6-7009512P6-80412P6-80172.191.8715.9 d797227726077726.630.72.5 L127x12.7 H8772387 21192nhIVx2-0-721226I-12-7-6980012P7-80412P7-80171.891.5715.9 d1959226827976826.630.72.5 L127x12.7 H8685681 21171nhI-12R-152140I-12-1-6952812P8-80312P8-80194.695.9112.7 53457313161232.855.821.17 L60x5 9.41232244 14144n IVx1-0-21522IVx1-0-2-333312T2-80412T2-80151.051.7212.7 40352510971354.036.841.38 L70x5 11.21351748 14187n IVx1-0-31624IVx1-0-3-359112T3-80412T3-80154.855.6212.7 42956512811254.036.841.38 L70x5 11.21251844 14173n IVx1-0-41730IVx1-0-4-386412T4-80412T4-80158.559.3212.7 41956010761374.377.361.48 L75x5 121371752 14202n IVx1-0-51831IVx1-0-5-412412T5-80412T5-80161.962.7212.7 47663812491274.036.841.38 L70x5 11.21272051 14175n IVx1-0-61920IVx1-0-6-436112T6-80412T6-80164.965.8212.7 45862111141344.377.361.48 L75x5 121341956 14199n IVx1-0-72000IVx1-0-7-457412T7-80412T7-801


5 / 6 Rev.D

44/117

Fuerzas [kg]




67.668.6212.7 100364710831364.377.362.29 L75x5 121364260 14312x IVx1-0-14384IVx1-0-1-476512T8-80212T8-80147.648.3112.7 43528813161232.855.821.17 L60x5 9.41231822 14144n IVx1-0-21240IVx1-0-2-167812L2-80112L2-80454.955.7112.7 44828310971353.416.841.38 L70x5 11.21351926 14187n IVx1-0-31530IVx1-0-3-193412L3-80112L3-80463.364.2112.7 53932612811253.416.841.38 L70x5 11.21252225 14173n IVx1-0-41840IVx1-0-4-223112L4-80112L4-80472.173.1112.7 58334510761373.77.361.48 L75x5 121372432 14202n IVx1-0-52155IVx1-0-5-253912L5-80112L5-804


6 / 6 Rev.D

45/117

1 / 21 TMD-rea-B Rev.B

6 Reacciones

Las siguientes reacciones han sido calculadas a partir de cargas sin coeficientes de mayoración.

6.1 Extensión +12m patas +3m. 6.1.1 Hipótesis normales. { 4864} > LIST REACTIONS ALL ACTIVE JOINTS 1 **************************** *RESULTS OF LATEST ANALYSES* **************************** PROBLEM - TMD TITLE - TMD 2x230kV SIEPAC - Rev.B torre Retenci¢n ACTIVE UNITS M KG DEG DEGC SEC ----------------------------------------------------------------------- --- LOADING - I-12 Viento M ximo Transversal 90§ --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE 12P8-801 GLOBAL -6437.9 -7004.9 47577.0 12P8-802 GLOBAL 2257.2 -2851.1 -17011.9 12P8-803 GLOBAL -3995.7 -4561.2 -29785.9 12P8-804 GLOBAL 4676.4 -5271.8 34746.8 ----------------------------------------------------------------------- --- LOADING - II-12 Viento M ximo Longitudinal --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE 12P8-801 GLOBAL -5018.8 -4591.7 33527.8 12P8-802 GLOBAL -920.9 380.2 3120.9 12P8-803 GLOBAL -2577.2 -2147.5 -15736.7 12P8-804 GLOBAL 1498.9 -2040.0 14614.0 ----------------------------------------------------------------------- --- LOADING - III-12 Viento M ximo angular 45§ --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE

46/117


12P8-801 GLOBAL -5502.2 -5581.7 38193.8 12P8-802 GLOBAL 1313.5 -2072.2 -12420.2 12P8-803 GLOBAL -3060.1 -3138.0 -20402.8 12P8-804 GLOBAL 3732.8 -4493.0 30155.1 ----------------------------------------------------------------------- --- LOADING - I-12R Viento M ximo Transversal 90§ (Verticales reducidas) ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE 12P8-801 GLOBAL -5726.6 -6293.6 42288.0 12P8-802 GLOBAL 2968.4 -3562.3 -22300.9 12P8-803 GLOBAL -4707.0 -5272.5 -35074.9 12P8-804 GLOBAL 3965.2 -4560.6 29457.8 ----------------------------------------------------------------------- --- LOADING - II-12R Viento M ximo Longitudinal (Verticales reducidas) ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE 12P8-801 GLOBAL -4307.5 -3880.5 28238.8 12P8-802 GLOBAL -209.7 -331.0 -2168.1 12P8-803 GLOBAL -3288.4 -2858.7 -21025.7 12P8-804 GLOBAL 787.6 -1328.8 9325.0 ----------------------------------------------------------------------- --- LOADING - III-12R Viento M ximo angular 45§ (Verticales reducidas) ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE 12P8-801 GLOBAL -4791.0 -4870.5 32904.8 12P8-802 GLOBAL 2024.8 -2783.5 -17709.2 12P8-803 GLOBAL -3771.3 -3849.3 -25691.8 12P8-804 GLOBAL 3021.5 -3781.8 24866.1 6.1.2 Hipótesis excepcionales. ----------------------------------------------------------------------- --- LOADING - IVx1-0 Amarre temporal 0§ --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS

47/117


JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE 12P8-801 GLOBAL -1572.9 -3561.6 17695.5 12P8-802 GLOBAL -3849.2 1790.5 21780.4 12P8-803 GLOBAL -1448.1 27.1 -4224.5 12P8-804 GLOBAL -341.9 1744.0 -8866.4 ----------------------------------------------------------------------- --- LOADING - IVx2-0 Amarre temporal 0§ --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE 12P8-801 GLOBAL -4692.6 -4698.3 34386.1 12P8-802 GLOBAL -4775.1 4588.2 34347.0 12P8-803 GLOBAL -2346.1 -2156.0 -16584.0 12P8-804 GLOBAL -2260.2 2266.1 -16623.1 ----------------------------------------------------------------------- --- LOADING - IVx2-30 Amarre temporal 30§ --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE 12P8-801 GLOBAL -5449.1 -5480.5 40022.0 12P8-802 GLOBAL -3779.6 3573.2 26979.9 12P8-803 GLOBAL -3099.3 -2941.5 -22220.3 12P8-804 GLOBAL -1268.0 1247.7 -9255.6 ----------------------------------------------------------------------- --- LOADING - Vg Tendido (0§ - OPGW) --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE 12P8-801 GLOBAL -1294.3 -1535.5 10388.5 12P8-802 GLOBAL -1503.8 1338.8 10661.2 12P8-803 GLOBAL 1007.3 1132.4 7712.7 12P8-804 GLOBAL 1133.9 -935.7 7342.6 ----------------------------------------------------------------------- --- LOADING - Vs Tendido ( 0§ - Fase sup.) --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/

48/117


X FORCE Y FORCE Z FORCE 12P8-801 GLOBAL -1423.4 -1825.5 11898.2 12P8-802 GLOBAL -1805.4 1470.7 12289.4 12P8-803 GLOBAL 750.7 1027.5 6418.9 12P8-804 GLOBAL 1014.0 -672.8 5901.5 ----------------------------------------------------------------------- --- LOADING - Vi Tendido ( 0§ - Fase inf.) --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE 12P8-801 GLOBAL -1420.7 -1730.1 11129.3 12P8-802 GLOBAL -1808.0 1351.1 11459.7 12P8-803 GLOBAL 750.5 1147.1 7266.8 12P8-804 GLOBAL 1014.2 -768.1 6652.2 ----------------------------------------------------------------------- --- LOADING - VIg Mantenimiento ( OPGW 30§ ) --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE 12P8-801 GLOBAL -1533.5 -1868.0 11212.2 12P8-802 GLOBAL -323.6 -9.4 2285.2 12P8-803 GLOBAL 335.1 2.0 2313.3 12P8-804 GLOBAL 1522.0 -1856.6 11184.2 ----------------------------------------------------------------------- --- LOADING - VIfs Mantenimiento ( Fase sup. 30§ ) --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE 12P8-801 GLOBAL -1539.1 -1892.9 11254.3 12P8-802 GLOBAL -367.7 15.4 2612.7 12P8-803 GLOBAL 379.1 26.9 2640.8 12P8-804 GLOBAL 1527.7 -1881.4 11226.2 ----------------------------------------------------------------------- --- LOADING - VIfi Mantenimiento ( Fase inf. 30§ ) --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE

49/117


12P8-801 GLOBAL -1537.4 -1892.9 11241.8 12P8-802 GLOBAL -369.3 15.4 2625.2 12P8-803 GLOBAL 380.8 26.9 2653.3 12P8-804 GLOBAL 1526.0 -1881.4 11213.7 ----------------------------------------------------------------------- --- LOADING - VIg2 Mantenimiento ( OPGW 30§ ) --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE 12P8-801 GLOBAL -3038.7 -3063.1 22405.5 12P8-802 GLOBAL 567.0 -589.9 -4337.5 12P8-803 GLOBAL -555.5 -578.4 -4309.5 12P8-804 GLOBAL 3027.3 -3051.6 22377.5 ----------------------------------------------------------------------- --- LOADING - VIfs2 Mantenimiento ( Fase sup. 30§ ) --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE 12P8-801 GLOBAL -3082.7 -3087.9 22733.0 12P8-802 GLOBAL 561.3 -565.0 -4295.5 12P8-803 GLOBAL -549.9 -553.6 -4267.5 12P8-804 GLOBAL 3071.3 -3076.5 22704.9 ----------------------------------------------------------------------- --- LOADING - VIfi2 Mantenimiento ( Fase inf. 30§ ) --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE 12P8-801 GLOBAL -3084.4 -3087.9 22745.5 12P8-802 GLOBAL 563.0 -565.0 -4308.0 12P8-803 GLOBAL -551.6 -553.6 -4279.9 12P8-804 GLOBAL 3073.0 -3076.5 22717.4 1 { 4865} > $ { 4866} > UNITS CENTIMETERS { 4867} > OUTPUT DECIMAL 2 { 4868} > COUTPUT 'E12-P8.def'

50/117


6.2 Extensión +12m patas -3/+3m. 6.2.1 Hipótesis normales. { 4948} > LIST REACTIONS ALL ACTIVE JOINTS 1 **************************** *RESULTS OF LATEST ANALYSES* **************************** PROBLEM - TMD TITLE - TMD 2x230kV SIEPAC - Rev.B torre Retenci¢n ACTIVE UNITS M KG DEG DEGC SEC ----------------------------------------------------------------------- --- LOADING - I-12 Viento M ximo Transversal 90§ --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE 12P2-801 GLOBAL -6611.4 -7385.1 47859.6 12P2-804 GLOBAL 4551.5 -5335.7 33200.5 12P8-802 GLOBAL 2339.6 -2700.4 -17479.0 12P8-803 GLOBAL -3779.7 -4131.7 -28325.6 ----------------------------------------------------------------------- --- LOADING - II-12 Viento M ximo Longitudinal --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE 12P2-801 GLOBAL -5249.5 -4819.5 34137.9 12P2-804 GLOBAL 1423.4 -1926.9 13537.2 12P8-802 GLOBAL -713.0 231.7 1817.0 12P8-803 GLOBAL -2342.8 -1884.3 -14236.6 ----------------------------------------------------------------------- --- LOADING - III-12 Viento M ximo angular 45§ --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE 12P2-801 GLOBAL -5588.2 -5805.4 37891.7 12P2-804 GLOBAL 3728.6 -4606.4 29442.0 12P8-802 GLOBAL 1357.6 -1941.0 -12636.0 12P8-803 GLOBAL -2915.9 -2834.2 -19442.1

51/117


----------------------------------------------------------------------- --- LOADING - I-12R Viento M ximo Transversal 90§ (Verticales reducidas) ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE 12P2-801 GLOBAL -5900.1 -6673.9 42570.7 12P2-804 GLOBAL 3840.2 -4624.5 27911.6 12P8-802 GLOBAL 3050.8 -3411.7 -22768.0 12P8-803 GLOBAL -4491.0 -4843.0 -33614.7 ----------------------------------------------------------------------- --- LOADING - II-12R Viento M ximo Longitudinal (Verticales reducidas) ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE 12P2-801 GLOBAL -4538.2 -4108.2 28849.0 12P2-804 GLOBAL 712.0 -1215.6 8248.2 12P8-802 GLOBAL -1.8 -479.6 -3472.0 12P8-803 GLOBAL -3054.1 -2595.6 -19525.6 ----------------------------------------------------------------------- --- LOADING - III-12R Viento M ximo angular 45§ (Verticales reducidas) ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE 12P2-801 GLOBAL -4876.9 -5094.2 32602.7 12P2-804 GLOBAL 3017.2 -3895.1 24153.0 12P8-802 GLOBAL 2068.8 -2652.2 -17925.1 12P8-803 GLOBAL -3627.1 -3545.5 -24731.1 6.2.2 Hipótesis excepcionales. ----------------------------------------------------------------------- --- LOADING - IVx1-0 Amarre temporal 0§ --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE 12P2-801 GLOBAL -1854.7 -4725.4 19631.5 12P2-804 GLOBAL -527.8 2538.3 -11705.2 12P8-802 GLOBAL -3657.8 2122.0 20725.9

52/117


12P8-803 GLOBAL -1171.7 65.0 -2537.6 ----------------------------------------------------------------------- --- LOADING - IVx2-0 Amarre temporal 0§ --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE 12P2-801 GLOBAL -5367.1 -5379.8 37845.9 12P2-804 GLOBAL -2765.7 2894.8 -20443.7 12P8-802 GLOBAL -4191.2 4079.1 30588.3 12P8-803 GLOBAL -1750.0 -1594.0 -12735.0 ----------------------------------------------------------------------- --- LOADING - IVx2-30 Amarre temporal 30§ --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE 12P2-801 GLOBAL -6100.4 -6153.8 43333.9 12P2-804 GLOBAL -1756.6 1840.2 -12976.3 12P8-802 GLOBAL -3219.0 3096.4 23374.4 12P8-803 GLOBAL -2520.0 -2383.8 -18476.4 ----------------------------------------------------------------------- --- LOADING - Vg Tendido (0§ - OPGW) --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE 12P2-801 GLOBAL -1403.2 -1688.2 10505.9 12P2-804 GLOBAL 1188.6 -859.1 6824.4 12P8-802 GLOBAL -1485.5 1391.4 10564.3 12P8-803 GLOBAL 1043.1 1155.9 7940.0 ----------------------------------------------------------------------- --- LOADING - Vs Tendido ( 0§ - Fase sup.) --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE 12P2-801 GLOBAL -1558.7 -2078.0 12262.5 12P2-804 GLOBAL 1040.0 -506.0 5119.9 12P8-802 GLOBAL -1760.6 1535.3 12035.1 12P8-803 GLOBAL 815.3 1048.8 6820.0

53/117


----------------------------------------------------------------------- --- LOADING - Vi Tendido ( 0§ - Fase inf.) --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE 12P2-801 GLOBAL -1537.9 -1951.6 11237.0 12P2-804 GLOBAL 1058.1 -633.8 6125.0 12P8-802 GLOBAL -1781.4 1436.7 11332.1 12P8-803 GLOBAL 797.2 1148.6 7543.5 ----------------------------------------------------------------------- --- LOADING - VIg Mantenimiento ( OPGW 30§ ) --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE 12P2-801 GLOBAL -1576.4 -2077.0 10716.3 12P2-804 GLOBAL 1565.0 -2061.6 10700.9 12P8-802 GLOBAL -371.3 199.3 2640.7 12P8-803 GLOBAL 382.7 207.4 2666.6 ----------------------------------------------------------------------- --- LOADING - VIfs Mantenimiento ( Fase sup. 30§ ) --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE 12P2-801 GLOBAL -1579.7 -2112.2 10740.6 12P2-804 GLOBAL 1568.2 -2096.8 10725.2 12P8-802 GLOBAL -417.7 234.5 2986.0 12P8-803 GLOBAL 429.1 242.6 3011.8 ----------------------------------------------------------------------- --- LOADING - VIfi Mantenimiento ( Fase inf. 30§ ) --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE 12P2-801 GLOBAL -1577.8 -2113.1 10726.5 12P2-804 GLOBAL 1566.3 -2097.7 10711.2 12P8-802 GLOBAL -419.6 235.4 3000.0 12P8-803 GLOBAL 431.0 243.5 3025.8

54/117


----------------------------------------------------------------------- --- LOADING - VIg2 Mantenimiento ( OPGW 30§ ) --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE 12P2-801 GLOBAL -3120.4 -3104.7 22196.0 12P2-804 GLOBAL 3108.9 -3089.4 22180.6 12P8-802 GLOBAL 557.9 -548.5 -4268.5 12P8-803 GLOBAL -546.4 -540.4 -4242.6 ----------------------------------------------------------------------- --- LOADING - VIfs2 Mantenimiento ( Fase sup. 30§ ) --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE 12P2-801 GLOBAL -3166.8 -3119.2 22541.2 12P2-804 GLOBAL 3155.3 -3103.9 22525.9 12P8-802 GLOBAL 554.6 -534.0 -4244.2 12P8-803 GLOBAL -543.1 -525.9 -4218.4 ----------------------------------------------------------------------- --- LOADING - VIfi2 Mantenimiento ( Fase inf. 30§ ) --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE 12P2-801 GLOBAL -3168.7 -3118.3 22555.2 12P2-804 GLOBAL 3157.2 -3103.0 22539.9 12P8-802 GLOBAL 556.5 -534.9 -4258.2 12P8-803 GLOBAL -545.0 -526.8 -4232.4 1 { 4949} > $ { 4950} > UNITS CENTIMETERS { 4951} > OUTPUT DECIMAL 2 { 4952} > COUTPUT '12-P2-8.def'

55/117


6.3 Tronco común patas +3m. 6.3.1 Hipótesis normales. { 5960} > LIST REACTIONS ALL ACTIVE JOINTS 1 **************************** *RESULTS OF LATEST ANALYSES* **************************** PROBLEM - TMD TITLE - TMD 2x230kV SIEPAC - Rev.B torre Retenci¢n ACTIVE UNITS M KG DEG DEGC SEC ----------------------------------------------------------------------- --- LOADING - I-0 Viento M ximo Transversal 90§ --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE AP8-801 GLOBAL -6069.2 -6479.6 44725.1 AP8-802 GLOBAL 2202.2 -2653.0 -16777.9 AP8-803 GLOBAL -3952.1 -4362.5 -29489.4 AP8-804 GLOBAL 4319.1 -4769.9 32012.5 ----------------------------------------------------------------------- --- LOADING - II-0 Viento M ximo Longitudinal --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE AP8-801 GLOBAL -4475.1 -4264.2 30846.2 AP8-802 GLOBAL -438.9 63.8 828.8 AP8-803 GLOBAL -2358.7 -2146.2 -15610.3 AP8-804 GLOBAL 1678.8 -2052.4 14405.8 ----------------------------------------------------------------------- --- LOADING - III-0 Viento M ximo angular 45§ --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE AP8-801 GLOBAL -4938.1 -5051.4 34951.8 AP8-802 GLOBAL 1567.1 -2087.2 -13418.2 AP8-803 GLOBAL -2821.0 -2934.2 -19716.0 AP8-804 GLOBAL 3684.0 -4204.2 28652.9

56/117


----------------------------------------------------------------------- --- LOADING - I-0R Viento M ximo Transversal 90§ (Verticales reducidas) ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE AP8-801 GLOBAL -5357.9 -5768.3 39436.1 AP8-802 GLOBAL 2913.5 -3364.3 -22066.8 AP8-803 GLOBAL -4663.4 -5073.8 -34778.4 AP8-804 GLOBAL 3607.8 -4058.6 26723.5 ----------------------------------------------------------------------- --- LOADING - II-0R Viento M ximo Longitudinal (Verticales reducidas) ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE AP8-801 GLOBAL -3763.8 -3552.9 25557.2 AP8-802 GLOBAL 272.4 -647.5 -4460.2 AP8-803 GLOBAL -3070.1 -2857.5 -20899.4 AP8-804 GLOBAL 967.5 -1341.0 9116.8 ----------------------------------------------------------------------- --- LOADING - III-0R Viento M ximo angular 45§ (Verticales reducidas) ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE AP8-801 GLOBAL -4226.8 -4340.1 29662.7 AP8-802 GLOBAL 2278.4 -2798.6 -18707.2 AP8-803 GLOBAL -3532.3 -3645.5 -25005.1 AP8-804 GLOBAL 2972.7 -3492.9 23363.9 6.3.2 Hipótesis excepcionales. ----------------------------------------------------------------------- --- LOADING - IVx1-0 Amarre temporal 0§ --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE AP8-801 GLOBAL -942.0 -3777.9 15539.1 AP8-802 GLOBAL -4166.3 1228.8 21182.5 AP8-803 GLOBAL -1827.3 273.6 -4296.4

57/117


AP8-804 GLOBAL -276.4 2275.5 -11095.8 ----------------------------------------------------------------------- --- LOADING - IVx2-0 Amarre temporal 0§ --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE AP8-801 GLOBAL -4509.6 -4518.1 32824.8 AP8-802 GLOBAL -4644.5 4375.9 32801.6 AP8-803 GLOBAL -2527.4 -2258.9 -17566.5 AP8-804 GLOBAL -2392.5 2401.1 -17589.7 ----------------------------------------------------------------------- --- LOADING - IVx2-30 Amarre temporal 30§ --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE AP8-801 GLOBAL -5255.7 -5300.8 38388.2 AP8-802 GLOBAL -3659.3 3363.0 25526.7 AP8-803 GLOBAL -3269.0 -3046.5 -23130.6 AP8-804 GLOBAL -1412.0 1383.3 -10313.9 ----------------------------------------------------------------------- --- LOADING - Vg Tendido (0§ - OPGW) --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE AP8-801 GLOBAL -1084.8 -1428.8 9171.3 AP8-802 GLOBAL -1399.7 1162.0 9586.6 AP8-803 GLOBAL 817.9 994.0 6396.4 AP8-804 GLOBAL 1009.6 -727.2 5895.0 ----------------------------------------------------------------------- --- LOADING - Vs Tendido ( 0§ - Fase sup.) --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE AP8-801 GLOBAL -1178.2 -1751.7 10647.9 AP8-802 GLOBAL -1736.9 1257.5 11220.6 AP8-803 GLOBAL 533.3 925.6 5153.3 AP8-804 GLOBAL 917.8 -431.4 4430.5

58/117


----------------------------------------------------------------------- --- LOADING - Vi Tendido ( 0§ - Fase inf.) --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE AP8-801 GLOBAL -1179.5 -1620.8 9578.0 AP8-802 GLOBAL -1735.6 1081.9 10011.3 AP8-803 GLOBAL 538.1 1101.2 6388.6 AP8-804 GLOBAL 913.0 -562.3 5474.5 ----------------------------------------------------------------------- --- LOADING - VIg Mantenimiento ( OPGW 30§ ) --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE AP8-801 GLOBAL -1227.6 -1704.8 8874.9 AP8-802 GLOBAL -315.8 -161.4 2094.8 AP8-803 GLOBAL 315.9 -161.2 2095.3 AP8-804 GLOBAL 1227.5 -1704.6 8874.4 ----------------------------------------------------------------------- --- LOADING - VIfs Mantenimiento ( Fase sup. 30§ ) --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE AP8-801 GLOBAL -1225.1 -1729.6 8856.1 AP8-802 GLOBAL -368.0 -136.5 2483.1 AP8-803 GLOBAL 368.1 -136.4 2483.6 AP8-804 GLOBAL 1225.0 -1729.5 8855.6 ----------------------------------------------------------------------- --- LOADING - VIfi Mantenimiento ( Fase inf. 30§ ) --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE AP8-801 GLOBAL -1222.7 -1729.6 8838.3 AP8-802 GLOBAL -370.4 -136.5 2500.9 AP8-803 GLOBAL 370.5 -136.4 2501.4 AP8-804 GLOBAL 1222.6 -1729.5 8837.8

59/117


----------------------------------------------------------------------- --- LOADING - VIg2 Mantenimiento ( OPGW 30§ ) --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE AP8-801 GLOBAL -2865.1 -2899.8 21050.2 AP8-802 GLOBAL 707.0 -741.8 -5510.1 AP8-803 GLOBAL -706.9 -741.7 -5509.5 AP8-804 GLOBAL 2865.0 -2899.7 21049.7 ----------------------------------------------------------------------- --- LOADING - VIfs2 Mantenimiento ( Fase sup. 30§ ) --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE AP8-801 GLOBAL -2917.3 -2924.7 21438.5 AP8-802 GLOBAL 709.5 -716.9 -5528.8 AP8-803 GLOBAL -709.4 -716.8 -5528.3 AP8-804 GLOBAL 2917.2 -2924.6 21438.0 ----------------------------------------------------------------------- --- LOADING - VIfi2 Mantenimiento ( Fase inf. 30§ ) --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE AP8-801 GLOBAL -2919.7 -2924.7 21456.3 AP8-802 GLOBAL 711.9 -716.9 -5546.6 AP8-803 GLOBAL -711.8 -716.8 -5546.1 AP8-804 GLOBAL 2919.6 -2924.6 21455.8 1 { 5961} > $ { 5962} > UNITS CENTIMETERS { 5963} > OUTPUT DECIMAL 2 { 5964} > COUTPUT 'TC-P8.def'

60/117


6.4 Tronco común patas -3/+3m. 6.4.1 Hipótesis normales. { 6045} > LIST REACTIONS ALL ACTIVE JOINTS 1 **************************** *RESULTS OF LATEST ANALYSES* **************************** PROBLEM - TMD TITLE - TMD 2x230kV SIEPAC - Rev.B torre Retenci¢n ACTIVE UNITS M KG DEG DEGC SEC ----------------------------------------------------------------------- --- LOADING - I-0 Viento M ximo Transversal 90§ --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE AP2-801 GLOBAL -6429.0 -6982.9 45418.0 AP2-804 GLOBAL 4163.5 -4707.6 29831.2 AP8-802 GLOBAL 2378.0 -2598.1 -17740.0 AP8-803 GLOBAL -3612.5 -3840.3 -27309.3 ----------------------------------------------------------------------- --- LOADING - II-0 Viento M ximo Longitudinal --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE AP2-801 GLOBAL -4893.0 -4685.9 31969.3 AP2-804 GLOBAL 1569.9 -1836.8 12576.9 AP8-802 GLOBAL -136.8 -132.1 -956.1 AP8-803 GLOBAL -1998.1 -1744.1 -13390.1 ----------------------------------------------------------------------- --- LOADING - III-0 Viento M ximo angular 45§ --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE AP2-801 GLOBAL -5135.3 -5333.3 34771.7 AP2-804 GLOBAL 3726.5 -4275.5 27609.9 AP8-802 GLOBAL 1629.4 -1975.3 -13699.2 AP8-803 GLOBAL -2630.6 -2594.9 -18482.4

61/117


----------------------------------------------------------------------- --- LOADING - I-0R Viento M ximo Transversal 90§ (Verticales reducidas) ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE AP2-801 GLOBAL -5717.6 -6271.6 40129.1 AP2-804 GLOBAL 3452.2 -3996.3 24542.2 AP8-802 GLOBAL 3089.3 -3309.4 -23029.0 AP8-803 GLOBAL -4323.8 -4551.7 -32598.3 ----------------------------------------------------------------------- --- LOADING - II-0R Viento M ximo Longitudinal (Verticales reducidas) ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE AP2-801 GLOBAL -4181.7 -3974.6 26680.4 AP2-804 GLOBAL 858.6 -1125.5 7287.9 AP8-802 GLOBAL 574.5 -843.4 -6245.2 AP8-803 GLOBAL -2709.4 -2455.4 -18679.2 ----------------------------------------------------------------------- --- LOADING - III-0R Viento M ximo angular 45§ (Verticales reducidas) ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE AP2-801 GLOBAL -4423.9 -4622.0 29482.7 AP2-804 GLOBAL 3015.1 -3564.2 22320.9 AP8-802 GLOBAL 2340.7 -2686.6 -18988.2 AP8-803 GLOBAL -3341.9 -3306.2 -23771.5 6.4.2 Hipótesis excepcionales. ----------------------------------------------------------------------- --- LOADING - IVx1-0 Amarre temporal 0§ --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE AP2-801 GLOBAL -1409.6 -6057.7 18696.0 AP2-804 GLOBAL -573.8 3861.7 -15987.2 AP8-802 GLOBAL -3882.3 1898.7 20012.6

62/117


AP8-803 GLOBAL -1346.3 297.3 -1662.4 ----------------------------------------------------------------------- --- LOADING - IVx2-0 Amarre temporal 0§ --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE AP2-801 GLOBAL -5693.1 -5745.5 38243.0 AP2-804 GLOBAL -3234.0 3540.0 -23465.1 AP8-802 GLOBAL -3644.5 3540.2 26750.8 AP8-803 GLOBAL -1502.3 -1334.6 -11328.7 ----------------------------------------------------------------------- --- LOADING - IVx2-30 Amarre temporal 30§ --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE AP2-801 GLOBAL -6397.4 -6514.7 43558.2 AP2-804 GLOBAL -2226.6 2455.3 -16053.9 AP8-802 GLOBAL -2701.3 2583.9 19740.8 AP8-803 GLOBAL -2270.7 -2125.4 -17045.2 ----------------------------------------------------------------------- --- LOADING - Vg Tendido (0§ - OPGW) --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE AP2-801 GLOBAL -1299.9 -1725.8 9502.1 AP2-804 GLOBAL 1123.9 -563.3 5012.8 AP8-802 GLOBAL -1368.2 1253.2 9459.2 AP8-803 GLOBAL 887.2 1035.9 6804.8 ----------------------------------------------------------------------- --- LOADING - Vs Tendido ( 0§ - Fase sup.) --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE AP2-801 GLOBAL -1436.1 -2244.2 11381.6 AP2-804 GLOBAL 984.0 -90.4 3106.5 AP8-802 GLOBAL -1662.6 1377.2 10874.8 AP8-803 GLOBAL 650.6 957.4 5819.0

63/117


----------------------------------------------------------------------- --- LOADING - Vi Tendido ( 0§ - Fase inf.) --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE AP2-801 GLOBAL -1391.1 -2036.1 9727.8 AP2-804 GLOBAL 1024.9 -301.1 4729.1 AP8-802 GLOBAL -1707.6 1251.7 9968.5 AP8-803 GLOBAL 609.8 1085.4 6756.6 ----------------------------------------------------------------------- --- LOADING - VIg Mantenimiento ( OPGW 30§ ) --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE AP2-801 GLOBAL -1300.7 -2094.1 7917.8 AP2-804 GLOBAL 1300.6 -2093.9 7917.3 AP8-802 GLOBAL -426.3 228.0 2916.6 AP8-803 GLOBAL 426.4 228.1 2917.2 ----------------------------------------------------------------------- --- LOADING - VIfs Mantenimiento ( Fase sup. 30§ ) --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE AP2-801 GLOBAL -1292.6 -2138.7 7857.3 AP2-804 GLOBAL 1292.5 -2138.6 7856.8 AP8-802 GLOBAL -484.1 272.6 3346.6 AP8-803 GLOBAL 484.2 272.7 3347.2 ----------------------------------------------------------------------- --- LOADING - VIfi Mantenimiento ( Fase inf. 30§ ) --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE AP2-801 GLOBAL -1289.7 -2140.5 7835.8 AP2-804 GLOBAL 1289.6 -2140.3 7835.3 AP8-802 GLOBAL -487.0 274.3 3368.1 AP8-803 GLOBAL 487.1 274.4 3368.7

64/117


----------------------------------------------------------------------- --- LOADING - VIg2 Mantenimiento ( OPGW 30§ ) --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE AP2-801 GLOBAL -3029.1 -2969.3 20768.4 AP2-804 GLOBAL 3029.0 -2969.2 20767.9 AP8-802 GLOBAL 687.3 -672.3 -5363.5 AP8-803 GLOBAL -687.2 -672.2 -5362.9 ----------------------------------------------------------------------- --- LOADING - VIfs2 Mantenimiento ( Fase sup. 30§ ) --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE AP2-801 GLOBAL -3087.0 -2974.4 21198.5 AP2-804 GLOBAL 3086.8 -2974.2 21197.9 AP8-802 GLOBAL 695.4 -667.3 -5424.0 AP8-803 GLOBAL -695.3 -667.2 -5423.4 ----------------------------------------------------------------------- --- LOADING - VIfi2 Mantenimiento ( Fase inf. 30§ ) --- ----------------------------------------------------------------------- RESULTANT JOINT LOADS SUPPORTS JOINT /---------------------FORCE---------------------/ X FORCE Y FORCE Z FORCE AP2-801 GLOBAL -3089.9 -2972.6 21219.9 AP2-804 GLOBAL 3089.7 -2972.5 21219.4 AP8-802 GLOBAL 698.3 -669.0 -5445.5 AP8-803 GLOBAL -698.2 -668.9 -5444.9 1 { 6046} > $ { 6047} > UNITS CENTIMETERS { 6048} > OUTPUT DECIMAL 2 { 6049} > COUTPUT 'TC-p2-8.def'

65/117


6.5 Resumen de reacciones.

6.5.1 Hipótesis normales.

TMD - Hipótesis normalespatageometríahipótesishoriz.ZYX

12P2-801E+12m P-3/+3m.I-12991247860-7385-6611Máx. compresión

12P8-803E+12m P+3m.I-12R7068-35075-5273-4707Máx. arrancamiento

12P2-801E+12m P-3/+3m.I-129912-6611-7385-6611Máx. horizontal

6.5.2 Hipótesis excepcionales.

TMD - Hipótesis excepcionalespatageometríahipótesishoriz.ZYX

AP2-801Ecomún P-3/+3m.IVx2-30913143558-6515-6397Máx. compresión

AP2-804Ecomún P-3/+3m.IVx2-04795-234653540-3234Máx. arrancamiento

AP2-801Ecomún P-3/+3m.IVx2-309131-6397-6515-6397Máx. horizontal

$ $ T O P O L O G I A $ E J E S : Z = Vertical - Y = Transversal - X = Longitudinal $ $ longitudinal $ +X (línea) $ | Z vertical $ 2 para cálculo $ 2 | 1 $ | $ - 3 - - - 1 ------- 1 ------- +Y (transversal) $ ' $ 3 ' 4 $ 4 $ ' $

66/117

1 / 50 TMD-def-B Rev.B

7 Deformaciones

Las siguientes deformaciones han sido calculadas a partir de cargas con coeficientes de mayoración.

7.1 Extensión +9m patas +3m. { 5482} > LIST DISPLACEMENTS ALL ACTIVE JOINTS 1

**************************** *RESULTS OF LATEST ANALYSES* **************************** PROBLEM - TMD TITLE - TMD 2x230kV SIEPAC - Rev.B torre Retenci¢n ACTIVE UNITS CM KG DEG DEGC SEC -------------------------------------------------------------------------- --- LOADING - I-9 Viento M ximo Transversal 90§ --- -------------------------------------------------------------------------- RESULTANT JOINT DISPLACEMENTS SUPPORTS JOINT /-----------------DISPLACEMENT-----------------/ X DISP. Y DISP. Z DISP. 9P8-801 GLOBAL 0.00 0.00 0.00 9P8-802 GLOBAL 0.00 0.00 0.00 9P8-803 GLOBAL 0.00 0.00 0.00 9P8-804 GLOBAL 0.00 0.00 0.00 RESULTANT JOINT DISPLACEMENTS FREE JOINTS JOINT /-----------------DISPLACEMENT-----------------/ X DISP. Y DISP. Z DISP. C-1 GLOBAL 8.00 35.96 -3.04 C-2 GLOBAL 8.07 35.89 0.67 C-3 GLOBAL 8.08 35.90 1.47 C-4 GLOBAL 8.02 35.96 -2.24 C-5 GLOBAL 7.28 33.50 -3.03 C-6 GLOBAL 7.28 33.58 0.66 C-7 GLOBAL 7.26 33.56 1.46 C-8 GLOBAL 7.26 33.52 -2.23 CX-1 GLOBAL 8.03 36.19 -12.54 CX-3 GLOBAL 8.05 35.78 8.23 TS-105 GLOBAL 6.64 31.24 -3.00 TS-106 GLOBAL 7.08 31.34 0.65 TS-107 GLOBAL 6.48 31.35 1.45

67/117


TS-108 GLOBAL 6.92 31.23 -2.20 TS-109 GLOBAL 6.28 29.20 -2.97 TS-110 GLOBAL 6.28 29.08 0.65 TS-111 GLOBAL 6.32 29.08 1.44 TS-112 GLOBAL 6.32 29.20 -2.18 TS-205 GLOBAL 6.14 27.93 -2.94 TS-206 GLOBAL 5.84 27.83 0.65 TS-207 GLOBAL 6.20 27.85 1.44 TS-208 GLOBAL 5.90 27.92 -2.15 TS-209 GLOBAL 5.77 26.62 -2.90 TS-210 GLOBAL 5.78 26.71 0.66 TS-211 GLOBAL 5.71 26.70 1.44 TS-212 GLOBAL 5.73 26.63 -2.12 TS-305 GLOBAL 5.24 24.70 -2.85 TS-306 GLOBAL 5.58 24.77 0.64 TS-307 GLOBAL 5.10 24.73 1.41 TS-308 GLOBAL 5.44 24.74 -2.08 TS-309 GLOBAL 4.74 23.05 -2.80 TS-310 GLOBAL 5.20 22.96 0.64 TS-311 GLOBAL 4.65 23.00 1.38 TS-312 GLOBAL 5.11 23.00 -2.05 TS-313 GLOBAL 4.78 21.11 -2.71 TS-314 GLOBAL 4.26 21.19 0.61 TS-315 GLOBAL 4.86 21.20 1.34 TS-316 GLOBAL 4.34 21.09 -1.99 TS-317 GLOBAL 4.16 19.57 -2.62 TS-318 GLOBAL 4.16 19.46 0.59 TS-319 GLOBAL 4.20 19.46 1.28 TS-320 GLOBAL 4.20 19.57 -1.93 TS-405 GLOBAL 3.88 18.39 -2.54 TS-406 GLOBAL 4.08 18.29 0.56 TS-407 GLOBAL 3.77 18.30 1.24 TS-408 GLOBAL 3.98 18.37 -1.86 TS-409 GLOBAL 3.70 17.26 -2.45 TS-410 GLOBAL 3.72 17.34 0.54 TS-411 GLOBAL 3.65 17.33 1.19 TS-412 GLOBAL 3.67 17.27 -1.80 TS-505 GLOBAL 3.56 15.58 -2.37 TS-506 GLOBAL 3.04 15.66 0.50 TS-507 GLOBAL 3.65 15.61 1.13 TS-508 GLOBAL 3.12 15.63 -1.74 TS-509 GLOBAL 3.09 14.27 -2.28 TS-510 GLOBAL 2.77 14.16 0.47 TS-511 GLOBAL 3.22 14.23 1.07 TS-512 GLOBAL 2.90 14.20 -1.68 TS-513 GLOBAL 2.66 12.63 -2.16 TS-514 GLOBAL 2.89 12.71 0.42 TS-515 GLOBAL 2.51 12.73 0.98 TS-516 GLOBAL 2.74 12.61 -1.60 TS-517 GLOBAL 2.38 11.48 -2.03 TS-518 GLOBAL 2.38 11.36 0.38 TS-519 GLOBAL 2.42 11.37 0.90 TS-520 GLOBAL 2.42 11.48 -1.51 TS-605 GLOBAL 2.37 10.56 -1.93 TS-606 GLOBAL 1.99 10.43 0.33 TS-607 GLOBAL 2.42 10.46 0.82 TS-608 GLOBAL 2.05 10.53 -1.44 TS-609 GLOBAL 1.96 9.69 -1.83 TS-610 GLOBAL 2.06 9.80 0.29 TS-611 GLOBAL 1.95 9.78 0.75 TS-612 GLOBAL 2.06 9.71 -1.37

68/117


K-5 GLOBAL 7.27 33.57 -2.48 K-6 GLOBAL 7.24 33.54 -1.21 K-7 GLOBAL 7.27 33.52 0.80 K-8 GLOBAL 7.29 33.54 -0.36 K-109 GLOBAL 6.30 29.09 -2.72 K-111 GLOBAL 6.30 29.19 1.31 K-209 GLOBAL 5.74 26.68 -2.37 K-210 GLOBAL 5.73 26.66 -1.15 K-211 GLOBAL 5.74 26.65 0.78 K-212 GLOBAL 5.76 26.66 -0.35 K-317 GLOBAL 4.18 19.47 -2.13 K-319 GLOBAL 4.18 19.56 0.67 K-409 GLOBAL 3.68 17.31 -2.27 K-410 GLOBAL 3.66 17.30 -1.03 K-411 GLOBAL 3.68 17.28 1.12 K-412 GLOBAL 3.70 17.30 -0.29 K-517 GLOBAL 2.40 11.37 -1.92 K-519 GLOBAL 2.40 11.46 0.89 K-609 GLOBAL 2.02 9.76 -1.45 K-610 GLOBAL 2.01 9.74 -0.84 K-611 GLOBAL 2.02 9.73 0.26 K-612 GLOBAL 2.03 9.74 -0.27 M1-209 GLOBAL 5.86 26.50 -10.39 M1-211 GLOBAL 5.86 26.93 5.83 M2-409 GLOBAL 3.79 17.14 -9.39 M2-411 GLOBAL 3.79 17.56 5.06 M3-609 GLOBAL 2.15 9.58 -7.87 M3-611 GLOBAL 2.15 10.05 3.33 TC-705 GLOBAL 1.93 8.06 -1.78 TC-706 GLOBAL 1.39 7.76 0.36 TC-707 GLOBAL 1.83 7.87 0.83 TC-708 GLOBAL 1.30 7.94 -1.31 TC-709 GLOBAL 1.04 5.92 -1.84 TC-710 GLOBAL 1.30 6.11 0.43 TC-711 GLOBAL 1.11 6.06 0.92 TC-712 GLOBAL 1.36 5.97 -1.35 TC-713 GLOBAL 1.39 4.40 -1.56 TC-714 GLOBAL 0.45 3.92 0.42 TC-715 GLOBAL 1.17 4.12 0.86 TC-716 GLOBAL 0.22 4.20 -1.13 TC-717 GLOBAL 0.01 2.23 -1.61 TC-718 GLOBAL 0.65 2.60 0.45 TC-719 GLOBAL 0.21 2.47 0.90 TC-720 GLOBAL 0.85 2.36 -1.16 E9-729 GLOBAL 1.07 1.25 -1.05 E9-730 GLOBAL -0.46 0.51 0.36 E9-731 GLOBAL 0.68 0.83 0.68 E9-732 GLOBAL -0.86 0.93 -0.74 E9-737 GLOBAL -0.04 0.23 -1.03 E9-738 GLOBAL -0.05 0.25 0.34 E9-739 GLOBAL -0.03 0.25 0.64 E9-740 GLOBAL -0.03 0.23 -0.72 E9-741 GLOBAL -0.61 -0.30 -1.03 E9-742 GLOBAL -0.05 0.31 0.28 E9-743 GLOBAL -0.12 0.20 0.57 E9-744 GLOBAL 0.43 -0.18 -0.74 9K-737 GLOBAL -0.04 0.19 0.18 9K-738 GLOBAL -0.06 0.19 0.06 9K-739 GLOBAL -0.04 0.29 -0.14 9K-740 GLOBAL 0.04 0.19 0.01 9KT-741 GLOBAL -0.25 -0.14 -0.25

69/117


9KT-742 GLOBAL -0.27 0.16 0.03 9KT-743 GLOBAL 0.09 0.04 0.11 9KT-744 GLOBAL 0.08 -0.02 -0.17 9KL-741 GLOBAL -0.45 -0.15 -0.26 9KL-742 GLOBAL 0.11 0.19 0.01 9KL-743 GLOBAL -0.28 0.19 0.11 9KL-744 GLOBAL 0.27 -0.15 -0.17 --------------------------------------------------------------------------- --- LOADING - II-9 Viento M ximo Longitudinal --- --------------------------------------------------------------------------- RESULTANT JOINT DISPLACEMENTS SUPPORTS JOINT /-----------------DISPLACEMENT-----------------/ X DISP. Y DISP. Z DISP. 9P8-801 GLOBAL 0.00 0.00 0.00 9P8-802 GLOBAL 0.00 0.00 0.00 9P8-803 GLOBAL 0.00 0.00 0.00 9P8-804 GLOBAL 0.00 0.00 0.00 RESULTANT JOINT DISPLACEMENTS FREE JOINTS JOINT /-----------------DISPLACEMENT-----------------/ X DISP. Y DISP. Z DISP. C-1 GLOBAL 9.69 17.85 -2.18 C-2 GLOBAL 9.76 17.78 -0.34 C-3 GLOBAL 9.78 17.79 0.61 C-4 GLOBAL 9.71 17.85 -1.23 C-5 GLOBAL 8.80 16.59 -2.18 C-6 GLOBAL 8.80 16.67 -0.34 C-7 GLOBAL 8.78 16.65 0.61 C-8 GLOBAL 8.78 16.61 -1.22 CX-1 GLOBAL 9.71 18.06 -7.33 CX-3 GLOBAL 9.75 17.63 2.98 TS-105 GLOBAL 7.98 15.46 -2.16 TS-106 GLOBAL 8.60 15.57 -0.34 TS-107 GLOBAL 7.83 15.57 0.61 TS-108 GLOBAL 8.43 15.46 -1.21 TS-109 GLOBAL 7.61 14.51 -2.14 TS-110 GLOBAL 7.62 14.38 -0.33 TS-111 GLOBAL 7.66 14.38 0.61 TS-112 GLOBAL 7.66 14.50 -1.20 TS-205 GLOBAL 7.46 13.87 -2.11 TS-206 GLOBAL 7.09 13.77 -0.32 TS-207 GLOBAL 7.53 13.78 0.61 TS-208 GLOBAL 7.15 13.86 -1.18 TS-209 GLOBAL 7.01 13.17 -2.08 TS-210 GLOBAL 7.02 13.25 -0.31 TS-211 GLOBAL 6.96 13.25 0.61 TS-212 GLOBAL 6.96 13.17 -1.16 TS-305 GLOBAL 6.33 12.22 -2.05 TS-306 GLOBAL 6.83 12.29 -0.30 TS-307 GLOBAL 6.18 12.25 0.60

70/117


TS-308 GLOBAL 6.68 12.25 -1.14 TS-309 GLOBAL 5.78 11.43 -2.01 TS-310 GLOBAL 6.35 11.34 -0.29 TS-311 GLOBAL 5.69 11.39 0.59 TS-312 GLOBAL 6.24 11.38 -1.13 TS-313 GLOBAL 5.83 10.42 -1.95 TS-314 GLOBAL 5.25 10.50 -0.29 TS-315 GLOBAL 5.92 10.51 0.57 TS-316 GLOBAL 5.33 10.40 -1.09 TS-317 GLOBAL 5.11 9.70 -1.88 TS-318 GLOBAL 5.11 9.58 -0.27 TS-319 GLOBAL 5.16 9.59 0.54 TS-320 GLOBAL 5.15 9.70 -1.06 TS-405 GLOBAL 4.73 9.10 -1.82 TS-406 GLOBAL 5.06 9.01 -0.27 TS-407 GLOBAL 4.63 9.02 0.52 TS-408 GLOBAL 4.96 9.09 -1.03 TS-409 GLOBAL 4.59 8.50 -1.76 TS-410 GLOBAL 4.60 8.57 -0.26 TS-411 GLOBAL 4.53 8.57 0.50 TS-412 GLOBAL 4.54 8.50 -1.00 TS-505 GLOBAL 4.42 7.65 -1.70 TS-506 GLOBAL 3.83 7.73 -0.26 TS-507 GLOBAL 4.51 7.68 0.47 TS-508 GLOBAL 3.91 7.71 -0.97 TS-509 GLOBAL 3.93 7.04 -1.64 TS-510 GLOBAL 3.45 6.93 -0.26 TS-511 GLOBAL 4.07 7.00 0.43 TS-512 GLOBAL 3.58 6.97 -0.95 TS-513 GLOBAL 3.27 6.17 -1.56 TS-514 GLOBAL 3.72 6.26 -0.27 TS-515 GLOBAL 3.12 6.27 0.39 TS-516 GLOBAL 3.57 6.16 -0.91 TS-517 GLOBAL 3.05 5.65 -1.47 TS-518 GLOBAL 3.05 5.52 -0.26 TS-519 GLOBAL 3.09 5.53 0.34 TS-520 GLOBAL 3.09 5.64 -0.87 TS-605 GLOBAL 3.03 5.19 -1.41 TS-606 GLOBAL 2.61 5.05 -0.27 TS-607 GLOBAL 3.09 5.08 0.30 TS-608 GLOBAL 2.67 5.16 -0.84 TS-609 GLOBAL 2.60 4.69 -1.34 TS-610 GLOBAL 2.65 4.80 -0.27 TS-611 GLOBAL 2.59 4.78 0.26 TS-612 GLOBAL 2.65 4.71 -0.81 K-5 GLOBAL 8.78 16.66 -1.49 K-6 GLOBAL 8.76 16.63 -1.27 K-7 GLOBAL 8.79 16.61 -0.19 K-8 GLOBAL 8.81 16.63 -0.30 K-109 GLOBAL 7.63 14.39 -1.87 K-111 GLOBAL 7.64 14.49 0.46 K-209 GLOBAL 6.98 13.23 -1.42 K-210 GLOBAL 6.97 13.21 -1.22 K-211 GLOBAL 6.98 13.19 -0.17 K-212 GLOBAL 7.00 13.21 -0.28 K-317 GLOBAL 5.13 9.59 -1.26 K-319 GLOBAL 5.13 9.69 -0.19 K-409 GLOBAL 4.56 8.55 -1.59 K-410 GLOBAL 4.54 8.53 -1.07 K-411 GLOBAL 4.56 8.52 0.44 K-412 GLOBAL 4.57 8.53 -0.24

71/117


K-517 GLOBAL 3.07 5.53 -1.38 K-519 GLOBAL 3.07 5.63 0.36 K-609 GLOBAL 2.63 4.76 -0.86 K-610 GLOBAL 2.62 4.74 -0.86 K-611 GLOBAL 2.63 4.73 -0.33 K-612 GLOBAL 2.64 4.74 -0.25 M1-209 GLOBAL 7.04 13.03 -6.31 M1-211 GLOBAL 7.05 13.46 1.75 M2-409 GLOBAL 4.61 8.35 -5.77 M2-411 GLOBAL 4.62 8.78 1.44 M3-609 GLOBAL 2.70 4.55 -5.07 M3-611 GLOBAL 2.70 5.01 0.54 TC-705 GLOBAL 2.35 3.97 -1.28 TC-706 GLOBAL 2.09 3.66 -0.20 TC-707 GLOBAL 2.26 3.79 0.33 TC-708 GLOBAL 1.99 3.84 -0.75 TC-709 GLOBAL 1.62 2.76 -1.31 TC-710 GLOBAL 1.74 2.96 -0.17 TC-711 GLOBAL 1.68 2.90 0.39 TC-712 GLOBAL 1.81 2.82 -0.76 TC-713 GLOBAL 1.60 2.19 -1.09 TC-714 GLOBAL 1.14 1.67 -0.09 TC-715 GLOBAL 1.38 1.90 0.39 TC-716 GLOBAL 0.91 1.95 -0.62 TC-717 GLOBAL 0.58 0.84 -1.13 TC-718 GLOBAL 0.89 1.25 -0.08 TC-719 GLOBAL 0.78 1.08 0.41 TC-720 GLOBAL 1.09 1.01 -0.63 E9-729 GLOBAL 1.02 0.69 -0.71 E9-730 GLOBAL 0.27 -0.13 0.02 E9-731 GLOBAL 0.63 0.27 0.34 E9-732 GLOBAL -0.12 0.29 -0.39 E9-737 GLOBAL 0.32 -0.07 -0.70 E9-738 GLOBAL 0.31 -0.05 0.02 E9-739 GLOBAL 0.33 -0.05 0.31 E9-740 GLOBAL 0.33 -0.07 -0.40 E9-741 GLOBAL -0.11 -0.50 -0.71 E9-742 GLOBAL 0.16 0.14 -0.02 E9-743 GLOBAL 0.37 -0.01 0.25 E9-744 GLOBAL 0.65 -0.36 -0.44 9K-737 GLOBAL 0.28 -0.13 0.07 9K-738 GLOBAL 0.28 -0.07 0.11 9K-739 GLOBAL 0.28 -0.03 -0.03 9K-740 GLOBAL 0.38 -0.07 -0.04 9KT-741 GLOBAL 0.10 -0.34 -0.18 9KT-742 GLOBAL 0.10 -0.02 0.03 9KT-743 GLOBAL 0.45 -0.16 0.03 9KT-744 GLOBAL 0.45 -0.20 -0.18 9KL-741 GLOBAL 0.05 -0.34 -0.15 9KL-742 GLOBAL 0.32 -0.02 0.03 9KL-743 GLOBAL 0.21 0.00 0.00 9KL-744 GLOBAL 0.49 -0.36 -0.19 -------------------------------------------------------------------------- --- LOADING - III-9 Viento M ximo angular 45§ --- -------------------------------------------------------------------------- RESULTANT JOINT DISPLACEMENTS SUPPORTS

72/117


JOINT /-----------------DISPLACEMENT-----------------/ X DISP. Y DISP. Z DISP. 9P8-801 GLOBAL 0.00 0.00 0.00 9P8-802 GLOBAL 0.00 0.00 0.00 9P8-803 GLOBAL 0.00 0.00 0.00 9P8-804 GLOBAL 0.00 0.00 0.00 RESULTANT JOINT DISPLACEMENTS FREE JOINTS JOINT /-----------------DISPLACEMENT-----------------/ X DISP. Y DISP. Z DISP. C-1 GLOBAL 3.40 28.34 -2.41 C-2 GLOBAL 3.47 28.28 0.51 C-3 GLOBAL 3.48 28.28 0.84 C-4 GLOBAL 3.42 28.35 -2.08 C-5 GLOBAL 3.12 26.40 -2.40 C-6 GLOBAL 3.12 26.46 0.51 C-7 GLOBAL 3.10 26.46 0.83 C-8 GLOBAL 3.10 26.40 -2.07 CX-1 GLOBAL 3.43 28.56 -10.34 CX-3 GLOBAL 3.45 28.14 6.02 TS-105 GLOBAL 2.90 24.60 -2.38 TS-106 GLOBAL 3.08 24.71 0.50 TS-107 GLOBAL 2.74 24.71 0.83 TS-108 GLOBAL 2.92 24.60 -2.05 TS-109 GLOBAL 2.69 23.03 -2.35 TS-110 GLOBAL 2.69 22.90 0.50 TS-111 GLOBAL 2.74 22.90 0.82 TS-112 GLOBAL 2.74 23.02 -2.03 TS-205 GLOBAL 2.64 22.02 -2.32 TS-206 GLOBAL 2.51 21.93 0.51 TS-207 GLOBAL 2.70 21.93 0.82 TS-208 GLOBAL 2.57 22.01 -2.01 TS-209 GLOBAL 2.52 20.97 -2.29 TS-210 GLOBAL 2.53 21.05 0.51 TS-211 GLOBAL 2.46 21.05 0.83 TS-212 GLOBAL 2.48 20.97 -1.98 TS-305 GLOBAL 2.34 19.47 -2.25 TS-306 GLOBAL 2.47 19.51 0.50 TS-307 GLOBAL 2.20 19.50 0.81 TS-308 GLOBAL 2.32 19.48 -1.94 TS-309 GLOBAL 2.10 18.15 -2.21 TS-310 GLOBAL 2.32 18.09 0.50 TS-311 GLOBAL 2.00 18.11 0.80 TS-312 GLOBAL 2.22 18.14 -1.91 TS-313 GLOBAL 2.11 16.62 -2.14 TS-314 GLOBAL 1.84 16.71 0.48 TS-315 GLOBAL 2.19 16.71 0.77 TS-316 GLOBAL 1.92 16.61 -1.85 TS-317 GLOBAL 1.84 15.43 -2.07 TS-318 GLOBAL 1.84 15.32 0.46 TS-319 GLOBAL 1.88 15.32 0.74 TS-320 GLOBAL 1.88 15.43 -1.80 TS-405 GLOBAL 1.79 14.49 -2.01 TS-406 GLOBAL 1.85 14.40 0.44 TS-407 GLOBAL 1.68 14.40 0.71

73/117


TS-408 GLOBAL 1.74 14.48 -1.74 TS-409 GLOBAL 1.69 13.59 -1.94 TS-410 GLOBAL 1.70 13.66 0.42 TS-411 GLOBAL 1.64 13.66 0.68 TS-412 GLOBAL 1.65 13.59 -1.68 TS-505 GLOBAL 1.63 12.28 -1.88 TS-506 GLOBAL 1.36 12.32 0.39 TS-507 GLOBAL 1.71 12.30 0.64 TS-508 GLOBAL 1.44 12.29 -1.63 TS-509 GLOBAL 1.38 11.22 -1.81 TS-510 GLOBAL 1.28 11.16 0.36 TS-511 GLOBAL 1.51 11.18 0.60 TS-512 GLOBAL 1.41 11.20 -1.57 TS-513 GLOBAL 1.34 9.92 -1.72 TS-514 GLOBAL 1.38 10.02 0.32 TS-515 GLOBAL 1.19 10.02 0.54 TS-516 GLOBAL 1.23 9.92 -1.49 TS-517 GLOBAL 1.14 9.05 -1.62 TS-518 GLOBAL 1.14 8.92 0.28 TS-519 GLOBAL 1.18 8.93 0.48 TS-520 GLOBAL 1.18 9.04 -1.42 TS-605 GLOBAL 1.16 8.31 -1.54 TS-606 GLOBAL 0.96 8.20 0.24 TS-607 GLOBAL 1.22 8.20 0.44 TS-608 GLOBAL 1.02 8.30 -1.35 TS-609 GLOBAL 0.97 7.61 -1.46 TS-610 GLOBAL 1.06 7.71 0.21 TS-611 GLOBAL 0.97 7.71 0.39 TS-612 GLOBAL 1.05 7.62 -1.29 K-5 GLOBAL 3.11 26.46 -2.21 K-6 GLOBAL 3.08 26.43 -0.96 K-7 GLOBAL 3.11 26.41 0.52 K-8 GLOBAL 3.14 26.43 -0.60 K-109 GLOBAL 2.72 22.91 -2.22 K-111 GLOBAL 2.72 23.01 0.81 K-209 GLOBAL 2.49 21.03 -2.11 K-210 GLOBAL 2.48 21.01 -0.91 K-211 GLOBAL 2.49 20.99 0.52 K-212 GLOBAL 2.51 21.01 -0.59 K-317 GLOBAL 1.86 15.33 -1.91 K-319 GLOBAL 1.86 15.42 0.45 K-409 GLOBAL 1.67 13.64 -1.84 K-410 GLOBAL 1.65 13.62 -0.81 K-411 GLOBAL 1.67 13.61 0.69 K-412 GLOBAL 1.68 13.62 -0.50 K-517 GLOBAL 1.16 8.94 -1.55 K-519 GLOBAL 1.16 9.03 0.53 K-609 GLOBAL 1.02 7.67 -1.35 K-610 GLOBAL 1.00 7.66 -0.68 K-611 GLOBAL 1.02 7.65 0.15 K-612 GLOBAL 1.03 7.66 -0.44 M1-209 GLOBAL 2.49 20.84 -8.68 M1-211 GLOBAL 2.50 21.27 4.11 M2-409 GLOBAL 1.67 13.45 -7.87 M2-411 GLOBAL 1.67 13.88 3.54 M3-609 GLOBAL 1.02 7.48 -6.69 M3-611 GLOBAL 1.02 7.95 2.15 TC-705 GLOBAL 1.12 6.33 -1.41 TC-706 GLOBAL 0.70 6.10 0.28 TC-707 GLOBAL 1.02 6.14 0.46 TC-708 GLOBAL 0.60 6.28 -1.23

74/117


TC-709 GLOBAL 0.58 4.64 -1.45 TC-710 GLOBAL 0.77 4.80 0.34 TC-711 GLOBAL 0.64 4.78 0.53 TC-712 GLOBAL 0.84 4.66 -1.27 TC-713 GLOBAL 1.04 3.44 -1.21 TC-714 GLOBAL 0.30 3.07 0.35 TC-715 GLOBAL 0.81 3.16 0.51 TC-716 GLOBAL 0.07 3.35 -1.06 TC-717 GLOBAL 0.06 1.72 -1.25 TC-718 GLOBAL 0.56 2.03 0.38 TC-719 GLOBAL 0.26 1.97 0.54 TC-720 GLOBAL 0.76 1.79 -1.09 E9-729 GLOBAL 1.08 0.95 -0.79 E9-730 GLOBAL -0.13 0.38 0.33 E9-731 GLOBAL 0.69 0.53 0.42 E9-732 GLOBAL -0.52 0.80 -0.70 E9-737 GLOBAL 0.24 0.15 -0.77 E9-738 GLOBAL 0.24 0.17 0.31 E9-739 GLOBAL 0.26 0.17 0.39 E9-740 GLOBAL 0.26 0.15 -0.69 E9-741 GLOBAL -0.23 -0.30 -0.79 E9-742 GLOBAL 0.21 0.25 0.25 E9-743 GLOBAL 0.25 0.20 0.32 E9-744 GLOBAL 0.69 -0.25 -0.72 9K-737 GLOBAL 0.22 0.10 0.14 9K-738 GLOBAL 0.22 0.13 0.08 9K-739 GLOBAL 0.22 0.20 -0.10 9K-740 GLOBAL 0.32 0.13 -0.02 9KT-741 GLOBAL 0.07 -0.14 -0.17 9KT-742 GLOBAL 0.06 0.09 0.06 9KT-743 GLOBAL 0.42 0.04 0.03 9KT-744 GLOBAL 0.40 -0.09 -0.21 9KL-741 GLOBAL -0.07 -0.18 -0.16 9KL-742 GLOBAL 0.37 0.15 0.07 9KL-743 GLOBAL 0.10 0.16 0.00 9KL-744 GLOBAL 0.53 -0.19 -0.22 -------------------------------------------------------------------------- --- LOADING - I-9RViento Máximo Transversal 90§ Verticales reducidas) --- -------------------------------------------------------------------------- RESULTANT JOINT DISPLACEMENTS SUPPORTS JOINT /-----------------DISPLACEMENT-----------------/ X DISP. Y DISP. Z DISP. 9P8-801 GLOBAL 0.00 0.00 0.00 9P8-802 GLOBAL 0.00 0.00 0.00 9P8-803 GLOBAL 0.00 0.00 0.00 9P8-804 GLOBAL 0.00 0.00 0.00 RESULTANT JOINT DISPLACEMENTS FREE JOINTS JOINT /-----------------DISPLACEMENT-----------------/ X DISP. Y DISP. Z DISP.

75/117


C-1 GLOBAL 8.01 35.92 -2.35 C-2 GLOBAL 8.08 35.94 1.35 C-3 GLOBAL 8.07 35.95 2.15 C-4 GLOBAL 8.01 35.92 -1.56 C-5 GLOBAL 7.27 33.54 -2.35 C-6 GLOBAL 7.27 33.54 1.34 C-7 GLOBAL 7.27 33.52 2.14 C-8 GLOBAL 7.27 33.56 -1.55 CX-1 GLOBAL 8.03 35.90 -9.98 CX-3 GLOBAL 8.05 36.07 10.80 TS-105 GLOBAL 6.62 31.30 -2.33 TS-106 GLOBAL 7.06 31.28 1.32 TS-107 GLOBAL 6.51 31.29 2.12 TS-108 GLOBAL 6.95 31.29 -1.53 TS-109 GLOBAL 6.30 29.13 -2.31 TS-110 GLOBAL 6.30 29.15 1.31 TS-111 GLOBAL 6.30 29.15 2.10 TS-112 GLOBAL 6.30 29.13 -1.52 TS-205 GLOBAL 6.14 27.88 -2.29 TS-206 GLOBAL 5.84 27.88 1.30 TS-207 GLOBAL 6.21 27.89 2.08 TS-208 GLOBAL 5.91 27.87 -1.51 TS-209 GLOBAL 5.74 26.66 -2.28 TS-210 GLOBAL 5.75 26.67 1.28 TS-211 GLOBAL 5.74 26.65 2.06 TS-212 GLOBAL 5.76 26.67 -1.50 TS-305 GLOBAL 5.22 24.72 -2.24 TS-306 GLOBAL 5.56 24.75 1.26 TS-307 GLOBAL 5.12 24.72 2.03 TS-308 GLOBAL 5.46 24.75 -1.47 TS-309 GLOBAL 4.75 23.03 -2.20 TS-310 GLOBAL 5.21 22.98 1.24 TS-311 GLOBAL 4.65 23.03 1.98 TS-312 GLOBAL 5.11 22.98 -1.45 TS-313 GLOBAL 4.77 21.16 -2.13 TS-314 GLOBAL 4.25 21.13 1.19 TS-315 GLOBAL 4.87 21.15 1.92 TS-316 GLOBAL 4.35 21.15 -1.41 TS-317 GLOBAL 4.18 19.51 -2.06 TS-318 GLOBAL 4.18 19.52 1.15 TS-319 GLOBAL 4.17 19.52 1.84 TS-320 GLOBAL 4.17 19.51 -1.37 TS-405 GLOBAL 3.86 18.34 -2.00 TS-406 GLOBAL 4.06 18.33 1.10 TS-407 GLOBAL 3.79 18.35 1.78 TS-408 GLOBAL 4.00 18.32 -1.32 TS-409 GLOBAL 3.67 17.30 -1.93 TS-410 GLOBAL 3.69 17.30 1.06 TS-411 GLOBAL 3.68 17.29 1.71 TS-412 GLOBAL 3.70 17.31 -1.28 TS-505 GLOBAL 3.56 15.59 -1.86 TS-506 GLOBAL 3.03 15.64 1.01 TS-507 GLOBAL 3.65 15.60 1.64 TS-508 GLOBAL 3.13 15.64 -1.23 TS-509 GLOBAL 3.10 14.25 -1.78 TS-510 GLOBAL 2.79 14.18 0.97 TS-511 GLOBAL 3.20 14.25 1.56 TS-512 GLOBAL 2.88 14.18 -1.19 TS-513 GLOBAL 2.63 12.68 -1.68 TS-514 GLOBAL 2.87 12.66 0.90 TS-515 GLOBAL 2.54 12.67 1.46

76/117


TS-516 GLOBAL 2.77 12.67 -1.12 TS-517 GLOBAL 2.40 11.42 -1.57 TS-518 GLOBAL 2.40 11.42 0.83 TS-519 GLOBAL 2.40 11.43 1.35 TS-520 GLOBAL 2.40 11.41 -1.06 TS-605 GLOBAL 2.36 10.50 -1.49 TS-606 GLOBAL 1.99 10.48 0.77 TS-607 GLOBAL 2.43 10.51 1.27 TS-608 GLOBAL 2.05 10.47 -1.00 TS-609 GLOBAL 1.95 9.74 -1.40 TS-610 GLOBAL 2.06 9.75 0.72 TS-611 GLOBAL 1.96 9.73 1.18 TS-612 GLOBAL 2.07 9.76 -0.94 K-5 GLOBAL 7.27 33.53 -1.79 K-6 GLOBAL 7.28 33.54 -0.56 K-7 GLOBAL 7.27 33.55 1.49 K-8 GLOBAL 7.26 33.54 0.29 K-109 GLOBAL 6.30 29.15 -2.07 K-111 GLOBAL 6.30 29.13 1.96 K-209 GLOBAL 5.74 26.66 -1.74 K-210 GLOBAL 5.75 26.66 -0.54 K-211 GLOBAL 5.74 26.67 1.42 K-212 GLOBAL 5.74 26.66 0.26 K-317 GLOBAL 4.18 19.52 -1.56 K-319 GLOBAL 4.18 19.51 1.24 K-409 GLOBAL 3.68 17.30 -1.76 K-410 GLOBAL 3.68 17.30 -0.51 K-411 GLOBAL 3.68 17.30 1.63 K-412 GLOBAL 3.68 17.30 0.23 K-517 GLOBAL 2.40 11.42 -1.47 K-519 GLOBAL 2.40 11.41 1.34 K-609 GLOBAL 2.02 9.74 -1.02 K-610 GLOBAL 2.02 9.74 -0.43 K-611 GLOBAL 2.02 9.75 0.70 K-612 GLOBAL 2.02 9.74 0.14 M1-209 GLOBAL 5.86 26.74 -8.05 M1-211 GLOBAL 5.86 26.69 8.17 M2-409 GLOBAL 3.79 17.38 -7.17 M2-411 GLOBAL 3.79 17.33 7.28 M3-609 GLOBAL 2.15 9.84 -5.53 M3-611 GLOBAL 2.15 9.79 5.67 TC-705 GLOBAL 1.89 7.97 -1.41 TC-706 GLOBAL 1.36 7.85 0.73 TC-707 GLOBAL 1.87 7.96 1.20 TC-708 GLOBAL 1.33 7.86 -0.95 TC-709 GLOBAL 1.06 5.97 -1.50 TC-710 GLOBAL 1.31 6.06 0.78 TC-711 GLOBAL 1.10 6.01 1.27 TC-712 GLOBAL 1.35 6.02 -1.00 TC-713 GLOBAL 1.31 4.29 -1.30 TC-714 GLOBAL 0.37 4.03 0.68 TC-715 GLOBAL 1.24 4.22 1.11 TC-716 GLOBAL 0.30 4.09 -0.87 TC-717 GLOBAL 0.06 2.30 -1.37 TC-718 GLOBAL 0.70 2.53 0.69 TC-719 GLOBAL 0.16 2.40 1.14 TC-720 GLOBAL 0.80 2.43 -0.92 E9-729 GLOBAL 0.94 1.10 -0.93 E9-730 GLOBAL -0.59 0.66 0.49 E9-731 GLOBAL 0.81 0.97 0.80 E9-732 GLOBAL -0.73 0.79 -0.61

77/117


E9-737 GLOBAL -0.04 0.24 -0.90 E9-738 GLOBAL -0.05 0.25 0.46 E9-739 GLOBAL -0.03 0.25 0.77 E9-740 GLOBAL -0.03 0.23 -0.60 E9-741 GLOBAL -0.56 -0.25 -0.91 E9-742 GLOBAL -0.01 0.26 0.40 E9-743 GLOBAL -0.17 0.15 0.69 E9-744 GLOBAL 0.39 -0.13 -0.62 9K-737 GLOBAL -0.04 0.19 0.16 9K-738 GLOBAL -0.06 0.19 0.02 9K-739 GLOBAL -0.04 0.29 -0.16 9K-740 GLOBAL 0.04 0.19 -0.03 9KT-741 GLOBAL -0.25 -0.09 -0.23 9KT-742 GLOBAL -0.27 0.10 0.05 9KT-743 GLOBAL 0.09 -0.01 0.13 9KT-744 GLOBAL 0.08 0.03 -0.15 9KL-741 GLOBAL -0.40 -0.15 -0.24 9KL-742 GLOBAL 0.15 0.19 0.04 9KL-743 GLOBAL -0.33 0.19 0.13 9KL-744 GLOBAL 0.23 -0.15 -0.14 -------------------------------------------------------------------------- --- LOADING - II-9R Viento M ximo Longitudinal (Verticales reducidas) --- -------------------------------------------------------------------------- RESULTANT JOINT DISPLACEMENTS SUPPORTS JOINT /-----------------DISPLACEMENT-----------------/ X DISP. Y DISP. Z DISP. 9P8-801 GLOBAL 0.00 0.00 0.00 9P8-802 GLOBAL 0.00 0.00 0.00 9P8-803 GLOBAL 0.00 0.00 0.00 9P8-804 GLOBAL 0.00 0.00 0.00 RESULTANT JOINT DISPLACEMENTS FREE JOINTS JOINT /-----------------DISPLACEMENT-----------------/ X DISP. Y DISP. Z DISP. C-1 GLOBAL 9.70 17.81 -1.50 C-2 GLOBAL 9.77 17.83 0.34 C-3 GLOBAL 9.77 17.83 1.29 C-4 GLOBAL 9.70 17.81 -0.55 C-5 GLOBAL 8.78 16.63 -1.50 C-6 GLOBAL 8.79 16.63 0.34 C-7 GLOBAL 8.79 16.61 1.29 C-8 GLOBAL 8.79 16.65 -0.54 CX-1 GLOBAL 9.71 17.76 -4.77 CX-3 GLOBAL 9.75 17.92 5.55 TS-105 GLOBAL 7.96 15.53 -1.49 TS-106 GLOBAL 8.58 15.51 0.33 TS-107 GLOBAL 7.85 15.51 1.28 TS-108 GLOBAL 8.46 15.52 -0.54 TS-109 GLOBAL 7.64 14.44 -1.48 TS-110 GLOBAL 7.64 14.45 0.33

78/117


TS-111 GLOBAL 7.63 14.45 1.27 TS-112 GLOBAL 7.63 14.43 -0.54 TS-205 GLOBAL 7.46 13.82 -1.47 TS-206 GLOBAL 7.09 13.82 0.32 TS-207 GLOBAL 7.53 13.83 1.25 TS-208 GLOBAL 7.16 13.81 -0.54 TS-209 GLOBAL 6.98 13.21 -1.45 TS-210 GLOBAL 6.99 13.21 0.32 TS-211 GLOBAL 6.99 13.20 1.24 TS-212 GLOBAL 6.99 13.22 -0.53 TS-305 GLOBAL 6.31 12.23 -1.43 TS-306 GLOBAL 6.81 12.27 0.31 TS-307 GLOBAL 6.21 12.23 1.22 TS-308 GLOBAL 6.71 12.27 -0.53 TS-309 GLOBAL 5.79 11.41 -1.41 TS-310 GLOBAL 6.35 11.36 0.31 TS-311 GLOBAL 5.69 11.41 1.19 TS-312 GLOBAL 6.24 11.36 -0.53 TS-313 GLOBAL 5.82 10.47 -1.37 TS-314 GLOBAL 5.24 10.45 0.29 TS-315 GLOBAL 5.93 10.46 1.15 TS-316 GLOBAL 5.34 10.46 -0.51 TS-317 GLOBAL 5.14 9.64 -1.32 TS-318 GLOBAL 5.14 9.65 0.28 TS-319 GLOBAL 5.13 9.65 1.10 TS-320 GLOBAL 5.13 9.63 -0.50 TS-405 GLOBAL 4.71 9.06 -1.28 TS-406 GLOBAL 5.04 9.05 0.27 TS-407 GLOBAL 4.65 9.06 1.06 TS-408 GLOBAL 4.97 9.04 -0.49 TS-409 GLOBAL 4.56 8.54 -1.24 TS-410 GLOBAL 4.57 8.53 0.26 TS-411 GLOBAL 4.56 8.53 1.02 TS-412 GLOBAL 4.57 8.54 -0.48 TS-505 GLOBAL 4.41 7.67 -1.20 TS-506 GLOBAL 3.82 7.72 0.24 TS-507 GLOBAL 4.51 7.67 0.97 TS-508 GLOBAL 3.92 7.72 -0.46 TS-509 GLOBAL 3.95 7.03 -1.15 TS-510 GLOBAL 3.46 6.95 0.23 TS-511 GLOBAL 4.05 7.02 0.92 TS-512 GLOBAL 3.56 6.95 -0.45 TS-513 GLOBAL 3.24 6.23 -1.08 TS-514 GLOBAL 3.69 6.20 0.21 TS-515 GLOBAL 3.15 6.21 0.86 TS-516 GLOBAL 3.60 6.21 -0.43 TS-517 GLOBAL 3.07 5.59 -1.02 TS-518 GLOBAL 3.07 5.59 0.19 TS-519 GLOBAL 3.07 5.60 0.79 TS-520 GLOBAL 3.07 5.57 -0.42 TS-605 GLOBAL 3.02 5.13 -0.96 TS-606 GLOBAL 2.61 5.11 0.17 TS-607 GLOBAL 3.09 5.14 0.74 TS-608 GLOBAL 2.68 5.10 -0.40 TS-609 GLOBAL 2.59 4.74 -0.91 TS-610 GLOBAL 2.65 4.75 0.16 TS-611 GLOBAL 2.60 4.73 0.69 TS-612 GLOBAL 2.65 4.76 -0.38 K-5 GLOBAL 8.78 16.62 -0.80 K-6 GLOBAL 8.79 16.63 -0.62 K-7 GLOBAL 8.79 16.64 0.50

79/117


K-8 GLOBAL 8.78 16.63 0.35 K-109 GLOBAL 7.63 14.45 -1.22 K-111 GLOBAL 7.64 14.44 1.11 K-209 GLOBAL 6.98 13.21 -0.78 K-210 GLOBAL 6.98 13.21 -0.61 K-211 GLOBAL 6.98 13.21 0.46 K-212 GLOBAL 6.98 13.21 0.33 K-317 GLOBAL 5.13 9.64 -0.70 K-319 GLOBAL 5.13 9.63 0.38 K-409 GLOBAL 4.56 8.53 -1.08 K-410 GLOBAL 4.56 8.53 -0.56 K-411 GLOBAL 4.56 8.54 0.95 K-412 GLOBAL 4.56 8.53 0.27 K-517 GLOBAL 3.07 5.58 -0.93 K-519 GLOBAL 3.07 5.58 0.81 K-609 GLOBAL 2.63 4.74 -0.43 K-610 GLOBAL 2.63 4.74 -0.45 K-611 GLOBAL 2.63 4.75 0.11 K-612 GLOBAL 2.63 4.74 0.16 M1-209 GLOBAL 7.04 13.27 -3.97 M1-211 GLOBAL 7.05 13.22 4.09 M2-409 GLOBAL 4.61 8.59 -3.55 M2-411 GLOBAL 4.62 8.54 3.66 M3-609 GLOBAL 2.70 4.81 -2.74 M3-611 GLOBAL 2.70 4.76 2.88 TC-705 GLOBAL 2.32 3.89 -0.91 TC-706 GLOBAL 2.05 3.75 0.17 TC-707 GLOBAL 2.29 3.88 0.70 TC-708 GLOBAL 2.03 3.76 -0.38 TC-709 GLOBAL 1.63 2.81 -0.97 TC-710 GLOBAL 1.75 2.91 0.18 TC-711 GLOBAL 1.67 2.85 0.74 TC-712 GLOBAL 1.79 2.87 -0.41 TC-713 GLOBAL 1.53 2.08 -0.84 TC-714 GLOBAL 1.06 1.77 0.17 TC-715 GLOBAL 1.45 2.01 0.65 TC-716 GLOBAL 0.99 1.84 -0.36 TC-717 GLOBAL 0.63 0.91 -0.88 TC-718 GLOBAL 0.94 1.18 0.16 TC-719 GLOBAL 0.73 1.01 0.66 TC-720 GLOBAL 1.04 1.08 -0.39 E9-729 GLOBAL 0.89 0.55 -0.59 E9-730 GLOBAL 0.14 0.01 0.15 E9-731 GLOBAL 0.76 0.42 0.46 E9-732 GLOBAL 0.01 0.14 -0.27 E9-737 GLOBAL 0.32 -0.07 -0.57 E9-738 GLOBAL 0.31 -0.05 0.14 E9-739 GLOBAL 0.33 -0.05 0.44 E9-740 GLOBAL 0.33 -0.07 -0.28 E9-741 GLOBAL -0.07 -0.45 -0.59 E9-742 GLOBAL 0.21 0.09 0.10 E9-743 GLOBAL 0.33 -0.06 0.37 E9-744 GLOBAL 0.60 -0.30 -0.32 9K-737 GLOBAL 0.28 -0.13 0.05 9K-738 GLOBAL 0.28 -0.07 0.07 9K-739 GLOBAL 0.28 -0.03 -0.05 9K-740 GLOBAL 0.38 -0.07 -0.08 9KT-741 GLOBAL 0.10 -0.29 -0.16 9KT-742 GLOBAL 0.10 -0.07 0.05 9KT-743 GLOBAL 0.45 -0.22 0.05 9KT-744 GLOBAL 0.45 -0.14 -0.16

80/117


9KL-741 GLOBAL 0.09 -0.35 -0.13 9KL-742 GLOBAL 0.37 -0.01 0.06 9KL-743 GLOBAL 0.17 0.00 0.02 9KL-744 GLOBAL 0.44 -0.36 -0.16 -------------------------------------------------------------------------- --- LOADING - III-9R Viento M ximo angular 45§ (Verticales reducidas) --- -------------------------------------------------------------------------- RESULTANT JOINT DISPLACEMENTS SUPPORTS JOINT /-----------------DISPLACEMENT-----------------/ X DISP. Y DISP. Z DISP. 9P8-801 GLOBAL 0.00 0.00 0.00 9P8-802 GLOBAL 0.00 0.00 0.00 9P8-803 GLOBAL 0.00 0.00 0.00 9P8-804 GLOBAL 0.00 0.00 0.00 RESULTANT JOINT DISPLACEMENTS FREE JOINTS JOINT /-----------------DISPLACEMENT-----------------/ X DISP. Y DISP. Z DISP. C-1 GLOBAL 3.41 28.30 -1.72 C-2 GLOBAL 3.48 28.32 1.19 C-3 GLOBAL 3.47 28.33 1.52 C-4 GLOBAL 3.41 28.30 -1.40 C-5 GLOBAL 3.11 26.44 -1.72 C-6 GLOBAL 3.11 26.42 1.19 C-7 GLOBAL 3.12 26.42 1.51 C-8 GLOBAL 3.11 26.44 -1.39 CX-1 GLOBAL 3.43 28.27 -7.78 CX-3 GLOBAL 3.45 28.44 8.58 TS-105 GLOBAL 2.88 24.67 -1.71 TS-106 GLOBAL 3.06 24.65 1.17 TS-107 GLOBAL 2.77 24.65 1.50 TS-108 GLOBAL 2.94 24.66 -1.38 TS-109 GLOBAL 2.72 22.96 -1.69 TS-110 GLOBAL 2.72 22.97 1.16 TS-111 GLOBAL 2.71 22.97 1.48 TS-112 GLOBAL 2.71 22.95 -1.37 TS-205 GLOBAL 2.64 21.97 -1.68 TS-206 GLOBAL 2.50 21.98 1.15 TS-207 GLOBAL 2.71 21.98 1.47 TS-208 GLOBAL 2.57 21.97 -1.36 TS-209 GLOBAL 2.49 21.02 -1.67 TS-210 GLOBAL 2.50 21.01 1.14 TS-211 GLOBAL 2.49 21.01 1.45 TS-212 GLOBAL 2.51 21.01 -1.35 TS-305 GLOBAL 2.32 19.48 -1.64 TS-306 GLOBAL 2.44 19.50 1.12 TS-307 GLOBAL 2.22 19.48 1.43 TS-308 GLOBAL 2.34 19.50 -1.33 TS-309 GLOBAL 2.10 18.13 -1.61 TS-310 GLOBAL 2.32 18.12 1.10

81/117


TS-311 GLOBAL 2.00 18.13 1.40 TS-312 GLOBAL 2.22 18.11 -1.31 TS-313 GLOBAL 2.10 16.67 -1.56 TS-314 GLOBAL 1.83 16.65 1.06 TS-315 GLOBAL 2.20 16.66 1.35 TS-316 GLOBAL 1.93 16.66 -1.27 TS-317 GLOBAL 1.86 15.37 -1.51 TS-318 GLOBAL 1.86 15.38 1.02 TS-319 GLOBAL 1.86 15.38 1.29 TS-320 GLOBAL 1.86 15.37 -1.24 TS-405 GLOBAL 1.77 14.44 -1.47 TS-406 GLOBAL 1.83 14.45 0.98 TS-407 GLOBAL 1.70 14.45 1.25 TS-408 GLOBAL 1.76 14.44 -1.20 TS-409 GLOBAL 1.66 13.63 -1.42 TS-410 GLOBAL 1.67 13.62 0.94 TS-411 GLOBAL 1.67 13.62 1.20 TS-412 GLOBAL 1.68 13.63 -1.16 TS-505 GLOBAL 1.62 12.29 -1.37 TS-506 GLOBAL 1.35 12.31 0.90 TS-507 GLOBAL 1.72 12.29 1.15 TS-508 GLOBAL 1.45 12.31 -1.12 TS-509 GLOBAL 1.40 11.20 -1.31 TS-510 GLOBAL 1.29 11.18 0.86 TS-511 GLOBAL 1.50 11.20 1.09 TS-512 GLOBAL 1.39 11.18 -1.08 TS-513 GLOBAL 1.31 9.98 -1.24 TS-514 GLOBAL 1.35 9.96 0.80 TS-515 GLOBAL 1.21 9.97 1.02 TS-516 GLOBAL 1.25 9.97 -1.02 TS-517 GLOBAL 1.16 8.98 -1.16 TS-518 GLOBAL 1.16 8.99 0.74 TS-519 GLOBAL 1.16 8.99 0.94 TS-520 GLOBAL 1.16 8.98 -0.96 TS-605 GLOBAL 1.15 8.25 -1.10 TS-606 GLOBAL 0.96 8.25 0.69 TS-607 GLOBAL 1.22 8.26 0.88 TS-608 GLOBAL 1.02 8.24 -0.91 TS-609 GLOBAL 0.97 7.66 -1.04 TS-610 GLOBAL 1.05 7.66 0.64 TS-611 GLOBAL 0.97 7.66 0.81 TS-612 GLOBAL 1.06 7.67 -0.86 K-5 GLOBAL 3.11 26.42 -1.52 K-6 GLOBAL 3.12 26.43 -0.32 K-7 GLOBAL 3.11 26.44 1.21 K-8 GLOBAL 3.10 26.43 0.04 K-109 GLOBAL 2.72 22.97 -1.57 K-111 GLOBAL 2.72 22.96 1.46 K-209 GLOBAL 2.49 21.01 -1.47 K-210 GLOBAL 2.49 21.01 -0.30 K-211 GLOBAL 2.49 21.01 1.16 K-212 GLOBAL 2.49 21.01 0.02 K-317 GLOBAL 1.86 15.38 -1.34 K-319 GLOBAL 1.86 15.37 1.02 K-409 GLOBAL 1.67 13.62 -1.33 K-410 GLOBAL 1.67 13.62 -0.30 K-411 GLOBAL 1.67 13.63 1.20 K-412 GLOBAL 1.67 13.62 0.01 K-517 GLOBAL 1.16 8.99 -1.10 K-519 GLOBAL 1.16 8.98 0.97 K-609 GLOBAL 1.02 7.66 -0.91

82/117


K-610 GLOBAL 1.02 7.66 -0.26 K-611 GLOBAL 1.02 7.66 0.59 K-612 GLOBAL 1.01 7.66 -0.03 M1-209 GLOBAL 2.49 21.08 -6.33 M1-211 GLOBAL 2.50 21.03 6.46 M2-409 GLOBAL 1.67 13.69 -5.65 M2-411 GLOBAL 1.67 13.64 5.76 M3-609 GLOBAL 1.02 7.74 -4.35 M3-611 GLOBAL 1.02 7.69 4.49 TC-705 GLOBAL 1.08 6.24 -1.04 TC-706 GLOBAL 0.66 6.18 0.65 TC-707 GLOBAL 1.06 6.23 0.83 TC-708 GLOBAL 0.64 6.20 -0.86 TC-709 GLOBAL 0.59 4.69 -1.10 TC-710 GLOBAL 0.79 4.75 0.69 TC-711 GLOBAL 0.63 4.72 0.88 TC-712 GLOBAL 0.83 4.71 -0.92 TC-713 GLOBAL 0.96 3.33 -0.96 TC-714 GLOBAL 0.22 3.18 0.61 TC-715 GLOBAL 0.89 3.26 0.77 TC-716 GLOBAL 0.15 3.24 -0.80 TC-717 GLOBAL 0.11 1.80 -1.01 TC-718 GLOBAL 0.61 1.96 0.62 TC-719 GLOBAL 0.21 1.89 0.78 TC-720 GLOBAL 0.71 1.86 -0.85 E9-729 GLOBAL 0.95 0.81 -0.67 E9-730 GLOBAL -0.26 0.53 0.45 E9-731 GLOBAL 0.81 0.68 0.54 E9-732 GLOBAL -0.39 0.66 -0.57 E9-737 GLOBAL 0.24 0.15 -0.65 E9-738 GLOBAL 0.24 0.17 0.43 E9-739 GLOBAL 0.26 0.17 0.51 E9-740 GLOBAL 0.26 0.15 -0.57 E9-741 GLOBAL -0.18 -0.25 -0.66 E9-742 GLOBAL 0.25 0.20 0.37 E9-743 GLOBAL 0.21 0.14 0.44 E9-744 GLOBAL 0.65 -0.19 -0.59 9K-737 GLOBAL 0.22 0.10 0.12 9K-738 GLOBAL 0.22 0.13 0.05 9K-739 GLOBAL 0.22 0.20 -0.12 9K-740 GLOBAL 0.32 0.13 -0.05 9KT-741 GLOBAL 0.07 -0.09 -0.15 9KT-742 GLOBAL 0.06 0.04 0.08 9KT-743 GLOBAL 0.41 -0.01 0.05 9KT-744 GLOBAL 0.40 -0.03 -0.19 9KL-741 GLOBAL -0.03 -0.18 -0.13 9KL-742 GLOBAL 0.41 0.15 0.09 9KL-743 GLOBAL 0.05 0.16 0.03 9KL-744 GLOBAL 0.49 -0.19 -0.20 -------------------------------------------------------------------------- --- LOADING - IVx1-0 Amarre temporal 0§ --- -------------------------------------------------------------------------- RESULTANT JOINT DISPLACEMENTS SUPPORTS JOINT /-----------------DISPLACEMENT-----------------/ X DISP. Y DISP. Z DISP.

83/117


9P8-801 GLOBAL 0.00 0.00 0.00 9P8-802 GLOBAL 0.00 0.00 0.00 9P8-803 GLOBAL 0.00 0.00 0.00 9P8-804 GLOBAL 0.00 0.00 0.00 RESULTANT JOINT DISPLACEMENTS FREE JOINTS JOINT /-----------------DISPLACEMENT-----------------/ X DISP. Y DISP. Z DISP. C-1 GLOBAL 10.78 -5.92 -0.44 C-2 GLOBAL 15.27 -5.96 -1.63 C-3 GLOBAL 15.28 -9.72 -0.34 C-4 GLOBAL 10.78 -9.70 0.84 C-5 GLOBAL 9.94 -5.16 -0.45 C-6 GLOBAL 13.68 -5.12 -1.62 C-7 GLOBAL 13.67 -8.92 -0.33 C-8 GLOBAL 9.94 -8.92 0.83 CX-1 GLOBAL 2.38 -7.81 2.84 CX-3 GLOBAL 23.66 -7.99 -4.81 TS-105 GLOBAL 9.19 -4.57 -0.46 TS-106 GLOBAL 13.64 -4.54 -1.61 TS-107 GLOBAL 12.04 -8.12 -0.31 TS-108 GLOBAL 9.23 -8.18 0.82 TS-109 GLOBAL 8.49 -3.86 -0.47 TS-110 GLOBAL 11.99 -3.91 -1.57 TS-111 GLOBAL 12.03 -7.51 -0.31 TS-112 GLOBAL 8.49 -7.46 0.81 TS-205 GLOBAL 8.06 -3.44 -0.48 TS-206 GLOBAL 11.10 -3.50 -1.55 TS-207 GLOBAL 11.97 -6.99 -0.28 TS-208 GLOBAL 8.07 -6.98 0.79 TS-209 GLOBAL 7.63 -3.14 -0.49 TS-210 GLOBAL 11.10 -3.09 -1.51 TS-211 GLOBAL 11.06 -6.62 -0.26 TS-212 GLOBAL 7.63 -6.63 0.78 TS-305 GLOBAL 7.03 -2.81 -0.49 TS-306 GLOBAL 11.03 -2.74 -1.48 TS-307 GLOBAL 9.65 -5.98 -0.23 TS-308 GLOBAL 7.09 -5.94 0.74 TS-309 GLOBAL 6.54 -2.25 -0.51 TS-310 GLOBAL 10.16 -2.35 -1.42 TS-311 GLOBAL 8.88 -5.46 -0.22 TS-312 GLOBAL 6.54 -5.51 0.71 TS-313 GLOBAL 5.93 -2.01 -0.50 TS-314 GLOBAL 8.30 -2.00 -1.38 TS-315 GLOBAL 9.55 -4.85 -0.19 TS-316 GLOBAL 5.95 -4.91 0.67 TS-317 GLOBAL 5.40 -1.56 -0.50 TS-318 GLOBAL 8.22 -1.61 -1.31 TS-319 GLOBAL 8.25 -4.48 -0.19 TS-320 GLOBAL 5.40 -4.44 0.63 TS-405 GLOBAL 5.03 -1.28 -0.50 TS-406 GLOBAL 8.26 -1.34 -1.26 TS-407 GLOBAL 7.31 -4.03 -0.17 TS-408 GLOBAL 5.06 -4.02 0.60 TS-409 GLOBAL 4.69 -1.08 -0.50 TS-410 GLOBAL 7.37 -1.04 -1.20

84/117


TS-411 GLOBAL 7.33 -3.76 -0.16 TS-412 GLOBAL 4.69 -3.78 0.57 TS-505 GLOBAL 4.22 -0.95 -0.49 TS-506 GLOBAL 6.07 -0.86 -1.16 TS-507 GLOBAL 7.32 -3.26 -0.14 TS-508 GLOBAL 4.24 -3.20 0.52 TS-509 GLOBAL 3.86 -0.53 -0.50 TS-510 GLOBAL 5.27 -0.65 -1.10 TS-511 GLOBAL 6.62 -2.87 -0.14 TS-512 GLOBAL 3.82 -2.96 0.48 TS-513 GLOBAL 3.34 -0.50 -0.48 TS-514 GLOBAL 6.17 -0.48 -1.05 TS-515 GLOBAL 4.79 -2.39 -0.12 TS-516 GLOBAL 3.39 -2.46 0.43 TS-517 GLOBAL 2.97 -0.19 -0.47 TS-518 GLOBAL 4.88 -0.25 -0.97 TS-519 GLOBAL 4.91 -2.18 -0.13 TS-520 GLOBAL 2.97 -2.14 0.38 TS-605 GLOBAL 2.72 -0.03 -0.45 TS-606 GLOBAL 4.09 -0.12 -0.93 TS-607 GLOBAL 4.95 -1.83 -0.12 TS-608 GLOBAL 2.73 -1.83 0.34 TS-609 GLOBAL 2.51 0.04 -0.45 TS-610 GLOBAL 4.08 0.11 -0.87 TS-611 GLOBAL 4.10 -1.67 -0.12 TS-612 GLOBAL 2.50 -1.68 0.31 K-5 GLOBAL 9.94 -7.04 0.20 K-6 GLOBAL 11.81 -5.15 -1.02 K-7 GLOBAL 13.67 -7.02 -1.64 K-8 GLOBAL 11.79 -8.91 0.20 K-109 GLOBAL 8.49 -5.66 0.16 K-111 GLOBAL 12.01 -5.70 -0.28 K-209 GLOBAL 7.64 -4.83 0.15 K-210 GLOBAL 9.31 -3.12 -1.02 K-211 GLOBAL 11.06 -4.91 -1.55 K-212 GLOBAL 9.39 -6.62 0.17 K-317 GLOBAL 5.40 -3.02 0.07 K-319 GLOBAL 8.23 -3.02 -1.41 K-409 GLOBAL 4.69 -2.38 0.02 K-410 GLOBAL 5.98 -1.06 -0.93 K-411 GLOBAL 7.33 -2.44 -0.02 K-412 GLOBAL 6.04 -3.76 0.12 K-517 GLOBAL 2.96 -1.20 -0.05 K-519 GLOBAL 4.89 -1.18 0.11 K-609 GLOBAL 2.48 -0.72 -0.06 K-610 GLOBAL 3.23 0.07 -0.76 K-611 GLOBAL 4.14 -0.88 -1.15 K-612 GLOBAL 3.39 -1.67 0.01 M1-209 GLOBAL 1.38 -4.89 2.17 M1-211 GLOBAL 17.71 -4.71 -4.18 M2-409 GLOBAL -0.23 -2.43 1.53 M2-411 GLOBAL 12.63 -2.26 -3.44 M3-609 GLOBAL -0.91 -0.83 0.87 M3-611 GLOBAL 7.96 -0.64 -2.85 TC-705 GLOBAL 1.85 0.44 -0.45 TC-706 GLOBAL 3.50 0.17 -0.82 TC-707 GLOBAL 3.34 -1.32 -0.06 TC-708 GLOBAL 1.90 -1.42 0.32 TC-709 GLOBAL 1.23 0.41 -0.48 TC-710 GLOBAL 2.69 0.57 -0.82 TC-711 GLOBAL 2.76 -1.09 -0.02

85/117


TC-712 GLOBAL 1.25 -1.09 0.33 TC-713 GLOBAL 0.59 0.91 -0.41 TC-714 GLOBAL 2.19 0.44 -0.68 TC-715 GLOBAL 1.94 -0.78 0.02 TC-716 GLOBAL 0.58 -0.95 0.30 TC-717 GLOBAL -0.05 0.64 -0.44 TC-718 GLOBAL 1.35 1.00 -0.70 TC-719 GLOBAL 1.54 -0.71 0.03 TC-720 GLOBAL 0.01 -0.64 0.30 E9-729 GLOBAL -0.52 1.33 -0.27 E9-730 GLOBAL 1.10 0.57 -0.46 E9-731 GLOBAL 0.73 -0.38 0.05 E9-732 GLOBAL -0.60 -0.67 0.25 E9-737 GLOBAL -0.87 1.08 -0.26 E9-738 GLOBAL 0.74 1.10 -0.46 E9-739 GLOBAL 0.76 -0.50 0.03 E9-740 GLOBAL -0.85 -0.51 0.25 E9-741 GLOBAL -1.12 0.88 -0.29 E9-742 GLOBAL 0.49 1.43 -0.48 E9-743 GLOBAL 0.90 -0.41 -0.01 E9-744 GLOBAL -0.82 -0.59 0.20 9K-737 GLOBAL -0.81 0.27 0.03 9K-738 GLOBAL -0.05 1.02 0.05 9K-739 GLOBAL 0.69 0.31 -0.01 9K-740 GLOBAL -0.04 -0.47 -0.02 9KT-741 GLOBAL -0.52 1.00 0.07 9KT-742 GLOBAL -0.03 1.30 -0.30 9KT-743 GLOBAL 0.25 -0.54 0.06 9KT-744 GLOBAL -0.25 -0.46 -0.03 9KL-741 GLOBAL -1.00 0.43 -0.19 9KL-742 GLOBAL 0.62 0.70 -0.07 9KL-743 GLOBAL 0.77 0.23 -0.15 9KL-744 GLOBAL -0.95 -0.04 0.20 -------------------------------------------------------------------------- --- LOADING - IVx2-0 Amarre temporal 0§ --- -------------------------------------------------------------------------- RESULTANT JOINT DISPLACEMENTS SUPPORTS JOINT /-----------------DISPLACEMENT-----------------/ X DISP. Y DISP. Z DISP. 9P8-801 GLOBAL 0.00 0.00 0.00 9P8-802 GLOBAL 0.00 0.00 0.00 9P8-803 GLOBAL 0.00 0.00 0.00 9P8-804 GLOBAL 0.00 0.00 0.00 RESULTANT JOINT DISPLACEMENTS FREE JOINTS JOINT /-----------------DISPLACEMENT-----------------/ X DISP. Y DISP. Z DISP. C-1 GLOBAL 24.29 0.21 -1.83 C-2 GLOBAL 24.95 0.15 -1.83 C-3 GLOBAL 24.96 -0.21 0.58

86/117


C-4 GLOBAL 24.30 -0.16 0.58 C-5 GLOBAL 22.27 0.14 -1.83 C-6 GLOBAL 22.63 0.23 -1.83 C-7 GLOBAL 22.61 -0.18 0.58 C-8 GLOBAL 22.25 -0.19 0.58 CX-1 GLOBAL 23.47 0.18 -1.76 CX-3 GLOBAL 25.75 -0.18 -1.76 TS-105 GLOBAL 20.39 0.11 -1.82 TS-106 GLOBAL 21.94 0.18 -1.83 TS-107 GLOBAL 20.35 -0.09 0.59 TS-108 GLOBAL 21.25 -0.20 0.58 TS-109 GLOBAL 19.38 0.19 -1.81 TS-110 GLOBAL 19.67 0.10 -1.80 TS-111 GLOBAL 19.70 -0.20 0.58 TS-112 GLOBAL 19.41 -0.09 0.58 TS-205 GLOBAL 18.81 0.19 -1.79 TS-206 GLOBAL 18.39 0.08 -1.79 TS-207 GLOBAL 19.28 -0.15 0.59 TS-208 GLOBAL 18.29 -0.12 0.59 TS-209 GLOBAL 17.75 0.09 -1.77 TS-210 GLOBAL 18.02 0.18 -1.77 TS-211 GLOBAL 17.98 -0.12 0.59 TS-212 GLOBAL 17.71 -0.15 0.60 TS-305 GLOBAL 16.14 0.05 -1.75 TS-306 GLOBAL 17.43 0.18 -1.75 TS-307 GLOBAL 16.08 -0.15 0.59 TS-308 GLOBAL 16.86 -0.08 0.59 TS-309 GLOBAL 14.88 0.20 -1.71 TS-310 GLOBAL 16.13 0.03 -1.70 TS-311 GLOBAL 14.81 -0.07 0.57 TS-312 GLOBAL 15.64 -0.16 0.57 TS-313 GLOBAL 14.52 0.08 -1.66 TS-314 GLOBAL 13.70 0.11 -1.66 TS-315 GLOBAL 14.99 -0.03 0.56 TS-316 GLOBAL 13.74 -0.15 0.56 TS-317 GLOBAL 12.96 0.14 -1.60 TS-318 GLOBAL 13.16 0.05 -1.60 TS-319 GLOBAL 13.19 -0.14 0.53 TS-320 GLOBAL 13.00 -0.05 0.53 TS-405 GLOBAL 11.98 0.14 -1.56 TS-406 GLOBAL 12.87 0.03 -1.56 TS-407 GLOBAL 11.94 -0.09 0.52 TS-408 GLOBAL 12.47 -0.08 0.52 TS-409 GLOBAL 11.50 0.04 -1.51 TS-410 GLOBAL 11.67 0.13 -1.51 TS-411 GLOBAL 11.63 -0.07 0.50 TS-412 GLOBAL 11.46 -0.10 0.50 TS-505 GLOBAL 10.82 -0.01 -1.46 TS-506 GLOBAL 9.94 0.15 -1.46 TS-507 GLOBAL 11.24 -0.13 0.47 TS-508 GLOBAL 10.05 -0.01 0.47 TS-509 GLOBAL 9.72 0.18 -1.40 TS-510 GLOBAL 8.82 -0.04 -1.40 TS-511 GLOBAL 10.16 0.01 0.44 TS-512 GLOBAL 8.99 -0.15 0.44 TS-513 GLOBAL 8.10 0.04 -1.34 TS-514 GLOBAL 9.27 0.07 -1.34 TS-515 GLOBAL 7.91 0.01 0.40 TS-516 GLOBAL 8.82 -0.12 0.40 TS-517 GLOBAL 7.52 0.11 -1.26 TS-518 GLOBAL 7.63 0.00 -1.26

87/117


TS-519 GLOBAL 7.67 -0.09 0.35 TS-520 GLOBAL 7.55 -0.02 0.35 TS-605 GLOBAL 7.20 0.14 -1.21 TS-606 GLOBAL 6.60 -0.04 -1.21 TS-607 GLOBAL 7.49 -0.04 0.32 TS-608 GLOBAL 6.68 -0.05 0.32 TS-609 GLOBAL 6.33 -0.02 -1.15 TS-610 GLOBAL 6.42 0.12 -1.15 TS-611 GLOBAL 6.42 -0.04 0.29 TS-612 GLOBAL 6.32 -0.06 0.29 K-5 GLOBAL 22.25 0.01 -0.25 K-6 GLOBAL 22.42 0.18 -1.83 K-7 GLOBAL 22.61 -0.01 -1.29 K-8 GLOBAL 22.45 -0.18 0.57 K-109 GLOBAL 19.39 -0.04 -0.99 K-111 GLOBAL 19.68 0.04 0.05 K-209 GLOBAL 17.72 0.01 -0.22 K-210 GLOBAL 17.84 0.14 -1.80 K-211 GLOBAL 17.99 -0.01 -1.25 K-212 GLOBAL 17.87 -0.14 0.59 K-317 GLOBAL 12.98 -0.04 -0.16 K-319 GLOBAL 13.17 0.04 -1.20 K-409 GLOBAL 11.47 0.01 -0.88 K-410 GLOBAL 11.54 0.09 -1.60 K-411 GLOBAL 11.64 -0.01 0.16 K-412 GLOBAL 11.56 -0.09 0.53 K-517 GLOBAL 7.53 -0.06 -0.83 K-519 GLOBAL 7.64 0.03 0.21 K-609 GLOBAL 6.35 0.01 -0.06 K-610 GLOBAL 6.39 0.05 -1.25 K-611 GLOBAL 6.45 -0.01 -1.09 K-612 GLOBAL 6.41 -0.05 0.35 M1-209 GLOBAL 17.61 -0.17 -1.83 M1-211 GLOBAL 18.88 0.17 -1.83 M2-409 GLOBAL 11.53 -0.17 -1.73 M2-411 GLOBAL 12.33 0.17 -1.73 M3-609 GLOBAL 6.59 -0.19 -1.81 M3-611 GLOBAL 7.07 0.19 -1.81 TC-705 GLOBAL 5.12 0.29 -1.11 TC-706 GLOBAL 5.21 -0.20 -1.11 TC-707 GLOBAL 5.13 0.05 0.35 TC-708 GLOBAL 5.04 -0.15 0.35 TC-709 GLOBAL 3.77 -0.09 -1.14 TC-710 GLOBAL 3.85 0.18 -1.14 TC-711 GLOBAL 3.91 -0.07 0.40 TC-712 GLOBAL 3.82 -0.02 0.40 TC-713 GLOBAL 2.63 0.46 -0.96 TC-714 GLOBAL 2.71 -0.38 -0.96 TC-715 GLOBAL 2.54 0.15 0.40 TC-716 GLOBAL 2.45 -0.24 0.40 TC-717 GLOBAL 1.28 -0.26 -0.99 TC-718 GLOBAL 1.36 0.35 -0.99 TC-719 GLOBAL 1.52 -0.15 0.42 TC-720 GLOBAL 1.44 0.07 0.42 E9-729 GLOBAL 0.49 0.71 -0.64 E9-730 GLOBAL 0.57 -0.63 -0.64 E9-731 GLOBAL 0.25 0.29 0.34 E9-732 GLOBAL 0.17 -0.38 0.34 E9-737 GLOBAL -0.14 0.04 -0.63 E9-738 GLOBAL -0.05 0.05 -0.63 E9-739 GLOBAL -0.04 -0.04 0.33

88/117


E9-740 GLOBAL -0.12 -0.05 0.33 E9-741 GLOBAL -0.49 -0.34 -0.65 E9-742 GLOBAL -0.40 0.43 -0.65 E9-743 GLOBAL -0.01 -0.03 0.28 E9-744 GLOBAL -0.10 -0.06 0.28 9K-737 GLOBAL -0.13 -0.04 0.01 9K-738 GLOBAL -0.13 0.04 0.10 9K-739 GLOBAL -0.05 0.03 0.02 9K-740 GLOBAL -0.05 -0.04 -0.05 9KT-741 GLOBAL -0.40 -0.21 -0.18 9KT-742 GLOBAL -0.37 0.30 -0.19 9KT-743 GLOBAL -0.09 -0.16 0.07 9KT-744 GLOBAL -0.12 0.06 0.06 9KL-741 GLOBAL -0.36 -0.12 -0.21 9KL-742 GLOBAL -0.27 0.15 -0.20 9KL-743 GLOBAL -0.13 0.12 0.07 9KL-744 GLOBAL -0.23 -0.15 0.09 -------------------------------------------------------------------------- --- LOADING - IVx2-30 Amarre temporal 30§ --- -------------------------------------------------------------------------- RESULTANT JOINT DISPLACEMENTS SUPPORTS JOINT /-----------------DISPLACEMENT-----------------/ X DISP. Y DISP. Z DISP. 9P8-801 GLOBAL 0.00 0.00 0.00 9P8-802 GLOBAL 0.00 0.00 0.00 9P8-803 GLOBAL 0.00 0.00 0.00 9P8-804 GLOBAL 0.00 0.00 0.00 RESULTANT JOINT DISPLACEMENTS FREE JOINTS JOINT /-----------------DISPLACEMENT-----------------/ X DISP. Y DISP. Z DISP. C-1 GLOBAL 23.46 6.27 -2.10 C-2 GLOBAL 24.10 6.22 -1.48 C-3 GLOBAL 24.11 5.87 0.85 C-4 GLOBAL 23.48 5.91 0.22 C-5 GLOBAL 21.51 5.80 -2.10 C-6 GLOBAL 21.86 5.88 -1.48 C-7 GLOBAL 21.84 5.49 0.85 C-8 GLOBAL 21.50 5.48 0.23 CX-1 GLOBAL 22.67 6.25 -3.49 CX-3 GLOBAL 24.87 5.90 0.00 TS-105 GLOBAL 19.70 5.39 -2.09 TS-106 GLOBAL 21.19 5.46 -1.48 TS-107 GLOBAL 19.66 5.20 0.85 TS-108 GLOBAL 20.52 5.09 0.23 TS-109 GLOBAL 18.72 5.11 -2.07 TS-110 GLOBAL 19.00 5.02 -1.46 TS-111 GLOBAL 19.03 4.73 0.84 TS-112 GLOBAL 18.75 4.84 0.23 TS-205 GLOBAL 18.18 4.90 -2.05

89/117


TS-206 GLOBAL 17.76 4.79 -1.45 TS-207 GLOBAL 18.62 4.56 0.85 TS-208 GLOBAL 17.67 4.59 0.25 TS-209 GLOBAL 17.15 4.59 -2.03 TS-210 GLOBAL 17.41 4.68 -1.43 TS-211 GLOBAL 17.37 4.39 0.85 TS-212 GLOBAL 17.11 4.36 0.25 TS-305 GLOBAL 15.60 4.23 -2.00 TS-306 GLOBAL 16.83 4.35 -1.41 TS-307 GLOBAL 15.54 4.03 0.85 TS-308 GLOBAL 16.28 4.10 0.26 TS-309 GLOBAL 14.37 4.08 -1.96 TS-310 GLOBAL 15.58 3.91 -1.37 TS-311 GLOBAL 14.30 3.82 0.82 TS-312 GLOBAL 15.11 3.73 0.24 TS-313 GLOBAL 14.03 3.64 -1.90 TS-314 GLOBAL 13.22 3.67 -1.34 TS-315 GLOBAL 14.49 3.54 0.80 TS-316 GLOBAL 13.27 3.42 0.24 TS-317 GLOBAL 12.52 3.43 -1.84 TS-318 GLOBAL 12.71 3.34 -1.29 TS-319 GLOBAL 12.74 3.16 0.77 TS-320 GLOBAL 12.56 3.25 0.22 TS-405 GLOBAL 11.58 3.23 -1.79 TS-406 GLOBAL 12.42 3.12 -1.26 TS-407 GLOBAL 11.54 3.00 0.75 TS-408 GLOBAL 12.03 3.02 0.22 TS-409 GLOBAL 11.11 2.96 -1.73 TS-410 GLOBAL 11.28 3.04 -1.22 TS-411 GLOBAL 11.23 2.85 0.72 TS-412 GLOBAL 11.07 2.82 0.21 TS-505 GLOBAL 10.46 2.61 -1.68 TS-506 GLOBAL 9.59 2.78 -1.19 TS-507 GLOBAL 10.87 2.50 0.69 TS-508 GLOBAL 9.70 2.62 0.20 TS-509 GLOBAL 9.38 2.57 -1.61 TS-510 GLOBAL 8.52 2.34 -1.14 TS-511 GLOBAL 9.81 2.40 0.64 TS-512 GLOBAL 8.70 2.24 0.17 TS-513 GLOBAL 7.85 2.16 -1.53 TS-514 GLOBAL 8.94 2.19 -1.09 TS-515 GLOBAL 7.66 2.13 0.59 TS-516 GLOBAL 8.50 2.01 0.15 TS-517 GLOBAL 7.26 2.02 -1.44 TS-518 GLOBAL 7.37 1.91 -1.03 TS-519 GLOBAL 7.41 1.82 0.53 TS-520 GLOBAL 7.30 1.89 0.12 TS-605 GLOBAL 6.96 1.88 -1.38 TS-606 GLOBAL 6.37 1.71 -0.99 TS-607 GLOBAL 7.24 1.71 0.49 TS-608 GLOBAL 6.44 1.70 0.10 TS-609 GLOBAL 6.10 1.60 -1.30 TS-610 GLOBAL 6.21 1.74 -0.94 TS-611 GLOBAL 6.19 1.58 0.44 TS-612 GLOBAL 6.12 1.57 0.08 K-5 GLOBAL 21.50 5.68 -0.58 K-6 GLOBAL 21.66 5.84 -1.79 K-7 GLOBAL 21.84 5.65 -0.96 K-8 GLOBAL 21.68 5.49 0.54 K-109 GLOBAL 18.73 4.89 -1.28 K-111 GLOBAL 19.01 4.97 0.34

90/117


K-209 GLOBAL 17.12 4.52 -0.53 K-210 GLOBAL 17.23 4.64 -1.76 K-211 GLOBAL 17.38 4.49 -0.93 K-212 GLOBAL 17.26 4.37 0.55 K-317 GLOBAL 12.53 3.25 -0.45 K-319 GLOBAL 12.72 3.33 -0.90 K-409 GLOBAL 11.08 2.93 -1.12 K-410 GLOBAL 11.15 3.00 -1.56 K-411 GLOBAL 11.24 2.90 0.39 K-412 GLOBAL 11.17 2.83 0.50 K-517 GLOBAL 7.27 1.86 -1.02 K-519 GLOBAL 7.38 1.94 0.39 K-609 GLOBAL 6.14 1.64 -0.25 K-610 GLOBAL 6.17 1.67 -1.22 K-611 GLOBAL 6.23 1.61 -0.89 K-612 GLOBAL 6.19 1.58 0.33 M1-209 GLOBAL 17.01 4.34 -3.19 M1-211 GLOBAL 18.23 4.69 -0.46 M2-409 GLOBAL 11.14 2.76 -2.96 M2-411 GLOBAL 11.91 3.10 -0.51 M3-609 GLOBAL 6.37 1.45 -2.77 M3-611 GLOBAL 6.83 1.82 -0.86 TC-705 GLOBAL 4.99 1.59 -1.27 TC-706 GLOBAL 4.99 1.11 -0.90 TC-707 GLOBAL 5.00 1.36 0.51 TC-708 GLOBAL 4.82 1.17 0.14 TC-709 GLOBAL 3.62 0.89 -1.31 TC-710 GLOBAL 3.74 1.15 -0.92 TC-711 GLOBAL 3.75 0.92 0.57 TC-712 GLOBAL 3.72 0.96 0.18 TC-713 GLOBAL 2.62 1.11 -1.11 TC-714 GLOBAL 2.55 0.29 -0.76 TC-715 GLOBAL 2.53 0.80 0.54 TC-716 GLOBAL 2.29 0.43 0.20 TC-717 GLOBAL 1.18 0.10 -1.14 TC-718 GLOBAL 1.37 0.70 -0.79 TC-719 GLOBAL 1.42 0.22 0.57 TC-720 GLOBAL 1.44 0.42 0.21 E9-729 GLOBAL 0.60 0.79 -0.75 E9-730 GLOBAL 0.42 -0.52 -0.50 E9-731 GLOBAL 0.37 0.37 0.45 E9-732 GLOBAL 0.03 -0.26 0.20 E9-737 GLOBAL -0.13 0.02 -0.74 E9-738 GLOBAL -0.05 0.03 -0.50 E9-739 GLOBAL -0.03 -0.05 0.43 E9-740 GLOBAL -0.12 -0.07 0.19 E9-741 GLOBAL -0.53 -0.39 -0.75 E9-742 GLOBAL -0.34 0.36 -0.52 E9-743 GLOBAL -0.05 -0.08 0.38 E9-744 GLOBAL -0.04 -0.13 0.15 9K-737 GLOBAL -0.13 -0.06 0.03 9K-738 GLOBAL -0.12 0.02 0.09 9K-739 GLOBAL -0.05 0.01 0.00 9K-740 GLOBAL -0.04 -0.06 -0.04 9KT-741 GLOBAL -0.39 -0.26 -0.21 9KT-742 GLOBAL -0.36 0.23 -0.15 9KT-743 GLOBAL -0.09 -0.21 0.10 9KT-744 GLOBAL -0.11 0.00 0.02 9KL-741 GLOBAL -0.40 -0.18 -0.24 9KL-742 GLOBAL -0.22 0.09 -0.16 9KL-743 GLOBAL -0.17 0.06 0.10

91/117


9KL-744 GLOBAL -0.17 -0.21 0.05 -------------------------------------------------------------------------- --- LOADING - Vg Tendido (0§ - OPGW) --- -------------------------------------------------------------------------- RESULTANT JOINT DISPLACEMENTS SUPPORTS JOINT /-----------------DISPLACEMENT-----------------/ X DISP. Y DISP. Z DISP. 9P8-801 GLOBAL 0.00 0.00 0.00 9P8-802 GLOBAL 0.00 0.00 0.00 9P8-803 GLOBAL 0.00 0.00 0.00 9P8-804 GLOBAL 0.00 0.00 0.00 RESULTANT JOINT DISPLACEMENTS FREE JOINTS JOINT /-----------------DISPLACEMENT-----------------/ X DISP. Y DISP. Z DISP. C-1 GLOBAL 2.95 -0.61 -1.01 C-2 GLOBAL 4.63 -0.71 -1.27 C-3 GLOBAL 4.65 -1.69 -0.83 C-4 GLOBAL 2.97 -1.60 -0.57 C-5 GLOBAL 2.65 -0.51 -1.03 C-6 GLOBAL 3.61 -0.40 -1.26 C-7 GLOBAL 3.58 -1.41 -0.82 C-8 GLOBAL 2.63 -1.48 -0.58 CX-1 GLOBAL 0.77 -0.89 -1.77 CX-3 GLOBAL 6.81 -1.54 -4.24 TS-105 GLOBAL 2.41 -0.50 -1.02 TS-106 GLOBAL 4.08 -0.37 -1.24 TS-107 GLOBAL 2.45 -1.14 -0.79 TS-108 GLOBAL 2.40 -1.27 -0.59 TS-109 GLOBAL 2.15 -0.24 -1.02 TS-110 GLOBAL 2.92 -0.39 -1.20 TS-111 GLOBAL 2.97 -1.15 -0.78 TS-112 GLOBAL 2.20 -1.02 -0.59 TS-205 GLOBAL 2.04 -0.23 -1.00 TS-206 GLOBAL 2.34 -0.33 -1.17 TS-207 GLOBAL 3.21 -1.05 -0.76 TS-208 GLOBAL 2.03 -0.95 -0.58 TS-209 GLOBAL 1.93 -0.26 -0.98 TS-210 GLOBAL 2.65 -0.18 -1.14 TS-211 GLOBAL 2.58 -0.90 -0.74 TS-212 GLOBAL 1.87 -0.99 -0.57 TS-305 GLOBAL 1.73 -0.24 -0.96 TS-306 GLOBAL 3.07 -0.17 -1.11 TS-307 GLOBAL 1.70 -0.80 -0.72 TS-308 GLOBAL 1.71 -0.82 -0.58 TS-309 GLOBAL 1.56 -0.09 -0.95 TS-310 GLOBAL 2.78 -0.18 -1.07 TS-311 GLOBAL 1.48 -0.75 -0.71 TS-312 GLOBAL 1.57 -0.73 -0.57 TS-313 GLOBAL 1.40 -0.18 -0.92

92/117


TS-314 GLOBAL 1.32 -0.08 -1.04 TS-315 GLOBAL 2.58 -0.57 -0.69 TS-316 GLOBAL 1.37 -0.68 -0.57 TS-317 GLOBAL 1.20 -0.01 -0.89 TS-318 GLOBAL 1.72 -0.14 -0.99 TS-319 GLOBAL 1.76 -0.63 -0.67 TS-320 GLOBAL 1.25 -0.51 -0.57 TS-405 GLOBAL 1.14 -0.01 -0.86 TS-406 GLOBAL 2.08 -0.11 -0.96 TS-407 GLOBAL 1.14 -0.56 -0.65 TS-408 GLOBAL 1.12 -0.47 -0.56 TS-409 GLOBAL 1.06 -0.07 -0.84 TS-410 GLOBAL 1.52 0.01 -0.92 TS-411 GLOBAL 1.46 -0.44 -0.64 TS-412 GLOBAL 1.00 -0.52 -0.55 TS-505 GLOBAL 0.92 -0.06 -0.82 TS-506 GLOBAL 0.68 0.00 -0.90 TS-507 GLOBAL 1.97 -0.40 -0.62 TS-508 GLOBAL 0.90 -0.41 -0.55 TS-509 GLOBAL 0.79 0.05 -0.80 TS-510 GLOBAL 0.47 -0.04 -0.86 TS-511 GLOBAL 1.82 -0.37 -0.61 TS-512 GLOBAL 0.81 -0.36 -0.54 TS-513 GLOBAL 0.70 -0.06 -0.77 TS-514 GLOBAL 1.71 0.05 -0.83 TS-515 GLOBAL 0.34 -0.23 -0.60 TS-516 GLOBAL 0.66 -0.35 -0.54 TS-517 GLOBAL 0.55 0.10 -0.74 TS-518 GLOBAL 0.86 -0.04 -0.79 TS-519 GLOBAL 0.91 -0.33 -0.58 TS-520 GLOBAL 0.60 -0.20 -0.53 TS-605 GLOBAL 0.53 0.09 -0.72 TS-606 GLOBAL 0.36 -0.03 -0.77 TS-607 GLOBAL 1.23 -0.28 -0.57 TS-608 GLOBAL 0.51 -0.17 -0.52 TS-609 GLOBAL 0.46 -0.01 -0.69 TS-610 GLOBAL 0.70 0.10 -0.74 TS-611 GLOBAL 0.70 -0.16 -0.56 TS-612 GLOBAL 0.46 -0.26 -0.51 K-5 GLOBAL 2.64 -0.93 -0.80 K-6 GLOBAL 3.09 -0.46 -1.10 K-7 GLOBAL 3.59 -0.97 -1.70 K-8 GLOBAL 3.13 -1.44 -0.72 K-109 GLOBAL 2.17 -0.76 -0.80 K-111 GLOBAL 2.95 -0.64 -0.33 K-209 GLOBAL 1.90 -0.56 -0.78 K-210 GLOBAL 2.24 -0.22 -1.11 K-211 GLOBAL 2.61 -0.60 -1.60 K-212 GLOBAL 2.28 -0.94 -0.68 K-317 GLOBAL 1.22 -0.39 -0.73 K-319 GLOBAL 1.74 -0.26 -1.50 K-409 GLOBAL 1.03 -0.24 -0.69 K-410 GLOBAL 1.24 -0.03 -0.94 K-411 GLOBAL 1.49 -0.27 -0.12 K-412 GLOBAL 1.28 -0.48 -0.62 K-517 GLOBAL 0.58 -0.18 -0.63 K-519 GLOBAL 0.88 -0.06 -0.03 K-609 GLOBAL 0.46 -0.06 -0.61 K-610 GLOBAL 0.56 0.04 -0.76 K-611 GLOBAL 0.71 -0.10 -1.31 K-612 GLOBAL 0.60 -0.21 -0.55

93/117


M1-209 GLOBAL 0.57 -0.83 -2.22 M1-211 GLOBAL 3.94 -0.34 -3.02 M2-409 GLOBAL 0.19 -0.50 -2.26 M2-411 GLOBAL 2.32 -0.02 -2.70 M3-609 GLOBAL -0.05 -0.35 -2.47 M3-611 GLOBAL 1.22 0.18 -2.71 TC-705 GLOBAL 0.38 0.19 -0.62 TC-706 GLOBAL 0.63 -0.06 -0.66 TC-707 GLOBAL 0.50 -0.26 -0.49 TC-708 GLOBAL 0.28 -0.09 -0.45 TC-709 GLOBAL 0.16 0.00 -0.60 TC-710 GLOBAL 0.39 0.17 -0.64 TC-711 GLOBAL 0.47 -0.08 -0.47 TC-712 GLOBAL 0.24 -0.22 -0.43 TC-713 GLOBAL 0.20 0.30 -0.47 TC-714 GLOBAL 0.44 -0.09 -0.50 TC-715 GLOBAL 0.16 -0.26 -0.35 TC-716 GLOBAL -0.04 0.01 -0.32 TC-717 GLOBAL -0.14 -0.04 -0.47 TC-718 GLOBAL 0.07 0.28 -0.50 TC-719 GLOBAL 0.31 0.02 -0.36 TC-720 GLOBAL 0.08 -0.22 -0.33 E9-729 GLOBAL 0.09 0.42 -0.26 E9-730 GLOBAL 0.33 -0.16 -0.28 E9-731 GLOBAL -0.14 -0.28 -0.17 E9-732 GLOBAL -0.35 0.11 -0.15 E9-737 GLOBAL -0.19 0.14 -0.26 E9-738 GLOBAL 0.04 0.16 -0.28 E9-739 GLOBAL 0.06 -0.08 -0.18 E9-740 GLOBAL -0.17 -0.10 -0.16 E9-741 GLOBAL -0.48 -0.15 -0.31 E9-742 GLOBAL -0.24 0.46 -0.33 E9-743 GLOBAL 0.33 0.18 -0.23 E9-744 GLOBAL 0.07 -0.36 -0.21 9K-737 GLOBAL -0.17 -0.02 0.03 9K-738 GLOBAL -0.12 0.14 0.04 9K-739 GLOBAL 0.05 0.09 0.02 9K-740 GLOBAL -0.01 -0.08 0.04 9KT-741 GLOBAL -0.32 0.04 -0.08 9KT-742 GLOBAL -0.25 0.28 -0.13 9KT-743 GLOBAL 0.15 0.00 -0.06 9KT-744 GLOBAL 0.08 -0.18 -0.08 9KL-741 GLOBAL -0.30 -0.13 -0.13 9KL-742 GLOBAL -0.06 0.27 -0.10 9KL-743 GLOBAL 0.14 0.19 -0.09 9KL-744 GLOBAL -0.11 -0.20 -0.04 -------------------------------------------------------------------------- --- LOADING - Vs Tendido ( 0§ - Fase sup.) --- -------------------------------------------------------------------------- RESULTANT JOINT DISPLACEMENTS SUPPORTS JOINT /-----------------DISPLACEMENT-----------------/ X DISP. Y DISP. Z DISP. 9P8-801 GLOBAL 0.00 0.00 0.00 9P8-802 GLOBAL 0.00 0.00 0.00

94/117


9P8-803 GLOBAL 0.00 0.00 0.00 9P8-804 GLOBAL 0.00 0.00 0.00 RESULTANT JOINT DISPLACEMENTS FREE JOINTS JOINT /-----------------DISPLACEMENT-----------------/ X DISP. Y DISP. Z DISP. C-1 GLOBAL 4.28 -0.76 -1.07 C-2 GLOBAL 5.75 -0.84 -1.33 C-3 GLOBAL 5.77 -2.20 -0.80 C-4 GLOBAL 4.30 -2.12 -0.56 C-5 GLOBAL 4.02 -0.67 -1.07 C-6 GLOBAL 5.38 -0.60 -1.33 C-7 GLOBAL 5.36 -1.97 -0.79 C-8 GLOBAL 4.00 -2.05 -0.55 CX-1 GLOBAL 1.27 -1.23 -1.86 CX-3 GLOBAL 8.78 -1.73 -3.22 TS-105 GLOBAL 3.82 -0.54 -1.06 TS-106 GLOBAL 5.16 -0.40 -1.32 TS-107 GLOBAL 4.95 -1.80 -0.79 TS-108 GLOBAL 3.60 -1.96 -0.54 TS-109 GLOBAL 3.38 -0.25 -1.06 TS-110 GLOBAL 4.70 -0.40 -1.30 TS-111 GLOBAL 4.77 -1.82 -0.78 TS-112 GLOBAL 3.43 -1.65 -0.53 TS-205 GLOBAL 3.18 -0.15 -1.05 TS-206 GLOBAL 4.50 -0.29 -1.28 TS-207 GLOBAL 4.57 -1.64 -0.75 TS-208 GLOBAL 3.27 -1.54 -0.51 TS-209 GLOBAL 3.07 -0.20 -1.04 TS-210 GLOBAL 4.40 -0.08 -1.25 TS-211 GLOBAL 4.32 -1.46 -0.72 TS-212 GLOBAL 3.01 -1.55 -0.49 TS-305 GLOBAL 2.88 -0.18 -1.02 TS-306 GLOBAL 4.12 -0.11 -1.23 TS-307 GLOBAL 3.91 -1.28 -0.69 TS-308 GLOBAL 2.71 -1.30 -0.49 TS-309 GLOBAL 2.66 0.00 -1.02 TS-310 GLOBAL 3.68 -0.10 -1.19 TS-311 GLOBAL 3.55 -1.21 -0.68 TS-312 GLOBAL 2.51 -1.17 -0.48 TS-313 GLOBAL 2.25 -0.12 -0.99 TS-314 GLOBAL 3.32 -0.02 -1.16 TS-315 GLOBAL 3.41 -0.94 -0.64 TS-316 GLOBAL 2.39 -1.05 -0.48 TS-317 GLOBAL 2.07 0.07 -0.96 TS-318 GLOBAL 3.01 -0.06 -1.10 TS-319 GLOBAL 3.06 -0.98 -0.63 TS-320 GLOBAL 2.12 -0.86 -0.47 TS-405 GLOBAL 2.01 0.07 -0.94 TS-406 GLOBAL 2.91 -0.03 -1.07 TS-407 GLOBAL 2.77 -0.87 -0.60 TS-408 GLOBAL 1.88 -0.78 -0.47 TS-409 GLOBAL 1.82 0.02 -0.91 TS-410 GLOBAL 2.67 0.10 -1.03 TS-411 GLOBAL 2.61 -0.74 -0.59 TS-412 GLOBAL 1.76 -0.83 -0.46 TS-505 GLOBAL 1.53 0.01 -0.89

95/117


TS-506 GLOBAL 2.32 0.07 -1.00 TS-507 GLOBAL 2.43 -0.65 -0.57 TS-508 GLOBAL 1.67 -0.65 -0.46 TS-509 GLOBAL 1.34 0.14 -0.87 TS-510 GLOBAL 1.98 0.04 -0.96 TS-511 GLOBAL 2.16 -0.60 -0.57 TS-512 GLOBAL 1.52 -0.60 -0.46 TS-513 GLOBAL 1.33 0.01 -0.83 TS-514 GLOBAL 1.98 0.11 -0.93 TS-515 GLOBAL 1.77 -0.42 -0.55 TS-516 GLOBAL 1.14 -0.53 -0.46 TS-517 GLOBAL 1.05 0.17 -0.80 TS-518 GLOBAL 1.61 0.03 -0.88 TS-519 GLOBAL 1.66 -0.50 -0.54 TS-520 GLOBAL 1.09 -0.37 -0.46 TS-605 GLOBAL 0.93 0.16 -0.78 TS-606 GLOBAL 1.45 0.03 -0.85 TS-607 GLOBAL 1.53 -0.43 -0.53 TS-608 GLOBAL 1.02 -0.33 -0.46 TS-609 GLOBAL 0.88 0.06 -0.75 TS-610 GLOBAL 1.33 0.18 -0.82 TS-611 GLOBAL 1.33 -0.31 -0.52 TS-612 GLOBAL 0.88 -0.41 -0.46 K-5 GLOBAL 4.01 -1.30 -0.89 K-6 GLOBAL 4.67 -0.64 -1.20 K-7 GLOBAL 5.37 -1.35 -1.14 K-8 GLOBAL 4.71 -2.01 -0.67 K-109 GLOBAL 3.41 -1.05 -0.71 K-111 GLOBAL 4.73 -1.00 -0.96 K-209 GLOBAL 3.04 -0.78 -0.85 K-210 GLOBAL 3.65 -0.15 -1.15 K-211 GLOBAL 4.34 -0.87 -1.07 K-212 GLOBAL 3.73 -1.50 -0.67 K-317 GLOBAL 2.09 -0.52 -0.80 K-319 GLOBAL 3.04 -0.39 -0.94 K-409 GLOBAL 1.80 -0.35 -0.61 K-410 GLOBAL 2.20 0.06 -1.05 K-411 GLOBAL 2.64 -0.38 -0.73 K-412 GLOBAL 2.23 -0.78 -0.56 K-517 GLOBAL 1.07 -0.24 -0.55 K-519 GLOBAL 1.64 -0.10 -0.63 K-609 GLOBAL 0.87 -0.09 -0.68 K-610 GLOBAL 1.08 0.12 -0.85 K-611 GLOBAL 1.34 -0.14 -0.74 K-612 GLOBAL 1.13 -0.36 -0.51 M1-209 GLOBAL 0.63 -1.08 -2.03 M1-211 GLOBAL 7.14 -0.50 -3.84 M2-409 GLOBAL 0.23 -0.60 -2.18 M2-411 GLOBAL 4.21 -0.12 -2.80 M3-609 GLOBAL -0.07 -0.38 -2.43 M3-611 GLOBAL 2.28 0.14 -2.77 TC-705 GLOBAL 0.70 0.29 -0.68 TC-706 GLOBAL 1.15 0.01 -0.73 TC-707 GLOBAL 1.01 -0.38 -0.44 TC-708 GLOBAL 0.60 -0.24 -0.39 TC-709 GLOBAL 0.38 0.08 -0.67 TC-710 GLOBAL 0.79 0.26 -0.72 TC-711 GLOBAL 0.88 -0.19 -0.42 TC-712 GLOBAL 0.46 -0.33 -0.37 TC-713 GLOBAL 0.32 0.42 -0.52 TC-714 GLOBAL 0.75 -0.02 -0.56

96/117


TC-715 GLOBAL 0.46 -0.34 -0.31 TC-716 GLOBAL 0.07 -0.12 -0.27 TC-717 GLOBAL -0.12 0.04 -0.53 TC-718 GLOBAL 0.27 0.39 -0.57 TC-719 GLOBAL 0.52 -0.09 -0.31 TC-720 GLOBAL 0.10 -0.30 -0.27 E9-729 GLOBAL 0.03 0.57 -0.30 E9-730 GLOBAL 0.46 -0.10 -0.32 E9-731 GLOBAL -0.03 -0.33 -0.14 E9-732 GLOBAL -0.41 -0.02 -0.11 E9-737 GLOBAL -0.30 0.25 -0.30 E9-738 GLOBAL 0.14 0.28 -0.33 E9-739 GLOBAL 0.16 -0.17 -0.15 E9-740 GLOBAL -0.29 -0.19 -0.12 E9-741 GLOBAL -0.61 -0.04 -0.35 E9-742 GLOBAL -0.16 0.60 -0.37 E9-743 GLOBAL 0.41 0.07 -0.20 E9-744 GLOBAL -0.06 -0.44 -0.17 9K-737 GLOBAL -0.28 -0.01 0.03 9K-738 GLOBAL -0.12 0.25 0.04 9K-739 GLOBAL 0.14 0.10 0.02 9K-740 GLOBAL -0.02 -0.17 0.03 9KT-741 GLOBAL -0.37 0.14 -0.07 9KT-742 GLOBAL -0.24 0.41 -0.16 9KT-743 GLOBAL 0.16 -0.11 -0.03 9KT-744 GLOBAL 0.03 -0.25 -0.08 9KL-741 GLOBAL -0.43 -0.08 -0.15 9KL-742 GLOBAL 0.02 0.31 -0.10 9KL-743 GLOBAL 0.23 0.18 -0.10 9KL-744 GLOBAL -0.24 -0.21 -0.01 -------------------------------------------------------------------------- --- LOADING - Vi Tendido ( 0§ - Fase inf.) --- -------------------------------------------------------------------------- RESULTANT JOINT DISPLACEMENTS SUPPORTS JOINT /-----------------DISPLACEMENT-----------------/ X DISP. Y DISP. Z DISP. 9P8-801 GLOBAL 0.00 0.00 0.00 9P8-802 GLOBAL 0.00 0.00 0.00 9P8-803 GLOBAL 0.00 0.00 0.00 9P8-804 GLOBAL 0.00 0.00 0.00 RESULTANT JOINT DISPLACEMENTS FREE JOINTS JOINT /-----------------DISPLACEMENT-----------------/ X DISP. Y DISP. Z DISP. C-1 GLOBAL 0.99 -0.44 -0.92 C-2 GLOBAL 1.59 -0.52 -0.99 C-3 GLOBAL 1.60 -1.03 -0.92 C-4 GLOBAL 1.01 -0.95 -0.84 C-5 GLOBAL 1.00 -0.46 -0.92 C-6 GLOBAL 1.52 -0.40 -0.99

97/117


C-7 GLOBAL 1.50 -0.91 -0.91 C-8 GLOBAL 0.98 -0.98 -0.84 CX-1 GLOBAL -0.12 -0.49 -2.32 CX-3 GLOBAL 2.72 -0.98 -2.72 TS-105 GLOBAL 1.04 -0.45 -0.91 TS-106 GLOBAL 1.56 -0.32 -0.98 TS-107 GLOBAL 1.37 -0.84 -0.90 TS-108 GLOBAL 0.86 -0.97 -0.83 TS-109 GLOBAL 0.88 -0.27 -0.90 TS-110 GLOBAL 1.40 -0.41 -0.97 TS-111 GLOBAL 1.44 -0.93 -0.89 TS-112 GLOBAL 0.93 -0.79 -0.82 TS-205 GLOBAL 0.84 -0.27 -0.88 TS-206 GLOBAL 1.36 -0.37 -0.95 TS-207 GLOBAL 1.43 -0.88 -0.88 TS-208 GLOBAL 0.91 -0.78 -0.80 TS-209 GLOBAL 0.88 -0.33 -0.86 TS-210 GLOBAL 1.40 -0.25 -0.93 TS-211 GLOBAL 1.34 -0.77 -0.86 TS-212 GLOBAL 0.82 -0.85 -0.78 TS-305 GLOBAL 0.90 -0.27 -0.85 TS-306 GLOBAL 1.41 -0.24 -0.92 TS-307 GLOBAL 1.25 -0.75 -0.84 TS-308 GLOBAL 0.73 -0.79 -0.77 TS-309 GLOBAL 0.83 -0.19 -0.83 TS-310 GLOBAL 1.35 -0.24 -0.91 TS-311 GLOBAL 1.24 -0.76 -0.83 TS-312 GLOBAL 0.72 -0.71 -0.76 TS-313 GLOBAL 0.69 -0.23 -0.81 TS-314 GLOBAL 1.21 -0.13 -0.88 TS-315 GLOBAL 1.30 -0.65 -0.81 TS-316 GLOBAL 0.78 -0.75 -0.73 TS-317 GLOBAL 0.67 -0.08 -0.79 TS-318 GLOBAL 1.19 -0.21 -0.86 TS-319 GLOBAL 1.24 -0.73 -0.78 TS-320 GLOBAL 0.72 -0.60 -0.71 TS-405 GLOBAL 0.73 -0.07 -0.76 TS-406 GLOBAL 1.25 -0.16 -0.84 TS-407 GLOBAL 1.13 -0.68 -0.76 TS-408 GLOBAL 0.61 -0.59 -0.69 TS-409 GLOBAL 0.68 -0.13 -0.74 TS-410 GLOBAL 1.19 -0.05 -0.82 TS-411 GLOBAL 1.13 -0.57 -0.74 TS-412 GLOBAL 0.62 -0.65 -0.67 TS-505 GLOBAL 0.57 -0.06 -0.73 TS-506 GLOBAL 1.07 -0.04 -0.81 TS-507 GLOBAL 1.17 -0.58 -0.73 TS-508 GLOBAL 0.67 -0.59 -0.66 TS-509 GLOBAL 0.51 0.01 -0.71 TS-510 GLOBAL 1.00 -0.03 -0.79 TS-511 GLOBAL 1.15 -0.56 -0.71 TS-512 GLOBAL 0.66 -0.54 -0.64 TS-513 GLOBAL 0.64 -0.03 -0.69 TS-514 GLOBAL 1.12 0.10 -0.77 TS-515 GLOBAL 0.95 -0.45 -0.69 TS-516 GLOBAL 0.46 -0.59 -0.62 TS-517 GLOBAL 0.49 0.15 -0.67 TS-518 GLOBAL 0.96 0.00 -0.75 TS-519 GLOBAL 1.03 -0.57 -0.67 TS-520 GLOBAL 0.54 -0.40 -0.60 TS-605 GLOBAL 0.46 0.19 -0.66

98/117


TS-606 GLOBAL 0.92 0.04 -0.73 TS-607 GLOBAL 0.98 -0.47 -0.65 TS-608 GLOBAL 0.52 -0.35 -0.58 TS-609 GLOBAL 0.47 0.07 -0.64 TS-610 GLOBAL 0.91 0.21 -0.71 TS-611 GLOBAL 0.90 -0.33 -0.63 TS-612 GLOBAL 0.47 -0.44 -0.57 K-5 GLOBAL 0.99 -0.66 -0.95 K-6 GLOBAL 1.22 -0.43 -0.95 K-7 GLOBAL 1.51 -0.72 -1.02 K-8 GLOBAL 1.28 -0.95 -0.88 K-109 GLOBAL 0.90 -0.66 -0.79 K-111 GLOBAL 1.42 -0.54 -0.87 K-209 GLOBAL 0.85 -0.53 -0.89 K-210 GLOBAL 1.09 -0.29 -0.92 K-211 GLOBAL 1.37 -0.57 -0.97 K-212 GLOBAL 1.13 -0.81 -0.84 K-317 GLOBAL 0.70 -0.45 -0.82 K-319 GLOBAL 1.22 -0.35 -0.89 K-409 GLOBAL 0.65 -0.33 -0.64 K-410 GLOBAL 0.88 -0.09 -0.81 K-411 GLOBAL 1.16 -0.37 -0.72 K-412 GLOBAL 0.93 -0.61 -0.74 K-517 GLOBAL 0.52 -0.22 -0.57 K-519 GLOBAL 0.99 -0.18 -0.64 K-609 GLOBAL 0.46 -0.06 -0.67 K-610 GLOBAL 0.63 0.14 -0.68 K-611 GLOBAL 0.92 -0.18 -0.74 K-612 GLOBAL 0.75 -0.38 -0.65 M1-209 GLOBAL -0.07 -0.79 -2.45 M1-211 GLOBAL 2.29 -0.31 -2.78 M2-409 GLOBAL -0.27 -0.59 -2.31 M2-411 GLOBAL 2.09 -0.11 -2.65 M3-609 GLOBAL -0.51 -0.39 -2.39 M3-611 GLOBAL 2.30 0.22 -3.47 TC-705 GLOBAL 0.42 0.30 -0.58 TC-706 GLOBAL 0.86 0.04 -0.64 TC-707 GLOBAL 0.74 -0.43 -0.54 TC-708 GLOBAL 0.33 -0.23 -0.48 TC-709 GLOBAL 0.23 0.09 -0.58 TC-710 GLOBAL 0.64 0.29 -0.63 TC-711 GLOBAL 0.72 -0.21 -0.51 TC-712 GLOBAL 0.30 -0.35 -0.46 TC-713 GLOBAL 0.27 0.41 -0.45 TC-714 GLOBAL 0.70 0.01 -0.49 TC-715 GLOBAL 0.42 -0.38 -0.38 TC-716 GLOBAL 0.02 -0.10 -0.34 TC-717 GLOBAL -0.09 0.06 -0.46 TC-718 GLOBAL 0.32 0.40 -0.50 TC-719 GLOBAL 0.56 -0.08 -0.38 TC-720 GLOBAL 0.13 -0.33 -0.34 E9-729 GLOBAL 0.13 0.55 -0.25 E9-730 GLOBAL 0.57 -0.06 -0.27 E9-731 GLOBAL 0.09 -0.38 -0.19 E9-732 GLOBAL -0.31 0.01 -0.16 E9-737 GLOBAL -0.16 0.26 -0.25 E9-738 GLOBAL 0.30 0.29 -0.28 E9-739 GLOBAL 0.32 -0.17 -0.20 E9-740 GLOBAL -0.14 -0.20 -0.17 E9-741 GLOBAL -0.45 -0.02 -0.29 E9-742 GLOBAL 0.02 0.60 -0.32

99/117


E9-743 GLOBAL 0.59 0.08 -0.25 E9-744 GLOBAL 0.10 -0.46 -0.22 9K-737 GLOBAL -0.14 -0.01 0.03 9K-738 GLOBAL 0.03 0.26 0.06 9K-739 GLOBAL 0.29 0.09 0.02 9K-740 GLOBAL 0.13 -0.17 0.02 9KT-741 GLOBAL -0.20 0.16 -0.04 9KT-742 GLOBAL -0.06 0.41 -0.13 9KT-743 GLOBAL 0.34 -0.10 -0.06 9KT-744 GLOBAL 0.19 -0.27 -0.11 9KL-741 GLOBAL -0.27 -0.08 -0.12 9KL-742 GLOBAL 0.20 0.31 -0.06 9KL-743 GLOBAL 0.41 0.18 -0.14 9KL-744 GLOBAL -0.08 -0.22 -0.05 -------------------------------------------------------------------------- --- LOADING - VIg Mantenimiento ( OPGW 30§ ) --- -------------------------------------------------------------------------- RESULTANT JOINT DISPLACEMENTS SUPPORTS JOINT /-----------------DISPLACEMENT-----------------/ X DISP. Y DISP. Z DISP. 9P8-801 GLOBAL 0.00 0.00 0.00 9P8-802 GLOBAL 0.00 0.00 0.00 9P8-803 GLOBAL 0.00 0.00 0.00 9P8-804 GLOBAL 0.00 0.00 0.00 RESULTANT JOINT DISPLACEMENTS FREE JOINTS JOINT /-----------------DISPLACEMENT-----------------/ X DISP. Y DISP. Z DISP. C-1 GLOBAL -0.04 -3.00 -0.10 C-2 GLOBAL 0.02 -3.06 -1.08 C-3 GLOBAL 0.05 -3.05 -1.08 C-4 GLOBAL -0.04 -2.99 -0.10 C-5 GLOBAL 0.00 -2.34 -0.13 C-6 GLOBAL 0.02 -2.29 -1.05 C-7 GLOBAL -0.02 -2.29 -1.05 C-8 GLOBAL 0.00 -2.34 -0.13 CX-1 GLOBAL -0.01 -2.99 2.10 CX-3 GLOBAL 0.01 -3.37 -5.85 TS-105 GLOBAL 0.02 -1.84 -0.15 TS-106 GLOBAL 0.15 -1.77 -1.02 TS-107 GLOBAL -0.15 -1.77 -1.02 TS-108 GLOBAL -0.02 -1.84 -0.15 TS-109 GLOBAL 0.00 -1.27 -0.17 TS-110 GLOBAL -0.02 -1.35 -0.98 TS-111 GLOBAL 0.02 -1.35 -0.98 TS-112 GLOBAL 0.00 -1.27 -0.17 TS-205 GLOBAL -0.04 -0.90 -0.19 TS-206 GLOBAL -0.04 -0.95 -0.94 TS-207 GLOBAL 0.04 -0.96 -0.94 TS-208 GLOBAL 0.04 -0.90 -0.19

100/117


TS-209 GLOBAL 0.00 -0.70 -0.21 TS-210 GLOBAL 0.04 -0.66 -0.90 TS-211 GLOBAL -0.03 -0.66 -0.90 TS-212 GLOBAL 0.00 -0.71 -0.21 TS-305 GLOBAL 0.01 -0.41 -0.24 TS-306 GLOBAL 0.14 -0.38 -0.85 TS-307 GLOBAL -0.14 -0.38 -0.85 TS-308 GLOBAL -0.01 -0.41 -0.24 TS-309 GLOBAL 0.04 -0.09 -0.26 TS-310 GLOBAL 0.08 -0.12 -0.81 TS-311 GLOBAL -0.08 -0.12 -0.81 TS-312 GLOBAL -0.04 -0.09 -0.26 TS-313 GLOBAL -0.05 0.08 -0.28 TS-314 GLOBAL -0.05 0.14 -0.76 TS-315 GLOBAL 0.05 0.14 -0.76 TS-316 GLOBAL 0.05 0.08 -0.28 TS-317 GLOBAL 0.00 0.37 -0.29 TS-318 GLOBAL -0.02 0.31 -0.72 TS-319 GLOBAL 0.02 0.31 -0.72 TS-320 GLOBAL 0.00 0.37 -0.29 TS-405 GLOBAL 0.01 0.60 -0.31 TS-406 GLOBAL 0.09 0.55 -0.68 TS-407 GLOBAL -0.09 0.55 -0.68 TS-408 GLOBAL -0.01 0.60 -0.31 TS-409 GLOBAL 0.00 0.67 -0.32 TS-410 GLOBAL 0.04 0.71 -0.64 TS-411 GLOBAL -0.03 0.71 -0.64 TS-412 GLOBAL 0.00 0.67 -0.32 TS-505 GLOBAL -0.05 0.77 -0.34 TS-506 GLOBAL -0.06 0.80 -0.61 TS-507 GLOBAL 0.06 0.79 -0.61 TS-508 GLOBAL 0.05 0.77 -0.34 TS-509 GLOBAL -0.03 0.92 -0.35 TS-510 GLOBAL -0.11 0.89 -0.58 TS-511 GLOBAL 0.11 0.89 -0.58 TS-512 GLOBAL 0.03 0.92 -0.35 TS-513 GLOBAL 0.03 0.93 -0.36 TS-514 GLOBAL 0.12 0.99 -0.55 TS-515 GLOBAL -0.12 0.99 -0.55 TS-516 GLOBAL -0.03 0.93 -0.36 TS-517 GLOBAL 0.00 1.08 -0.36 TS-518 GLOBAL -0.02 1.01 -0.52 TS-519 GLOBAL 0.02 1.01 -0.52 TS-520 GLOBAL 0.00 1.08 -0.36 TS-605 GLOBAL -0.03 1.19 -0.36 TS-606 GLOBAL -0.05 1.12 -0.49 TS-607 GLOBAL 0.05 1.12 -0.49 TS-608 GLOBAL 0.03 1.19 -0.36 TS-609 GLOBAL 0.00 1.16 -0.37 TS-610 GLOBAL 0.00 1.22 -0.47 TS-611 GLOBAL 0.00 1.22 -0.47 TS-612 GLOBAL 0.00 1.16 -0.37 K-5 GLOBAL 0.00 -2.29 -0.16 K-6 GLOBAL -0.02 -2.31 -0.53 K-7 GLOBAL 0.00 -2.34 -1.15 K-8 GLOBAL 0.02 -2.31 -0.66 K-109 GLOBAL 0.00 -1.33 -0.13 K-111 GLOBAL 0.00 -1.27 -0.89 K-209 GLOBAL 0.00 -0.67 -0.25 K-210 GLOBAL -0.01 -0.68 -0.53 K-211 GLOBAL 0.00 -0.69 -1.00

101/117


K-212 GLOBAL 0.01 -0.68 -0.64 K-317 GLOBAL 0.00 0.32 -0.33 K-319 GLOBAL 0.00 0.37 -0.82 K-409 GLOBAL 0.00 0.70 -0.29 K-410 GLOBAL -0.01 0.69 -0.47 K-411 GLOBAL 0.00 0.68 -0.55 K-412 GLOBAL 0.01 0.69 -0.56 K-517 GLOBAL 0.00 1.02 -0.33 K-519 GLOBAL 0.00 1.08 -0.42 K-609 GLOBAL 0.00 1.20 -0.40 K-610 GLOBAL -0.01 1.19 -0.42 K-611 GLOBAL 0.00 1.19 -0.56 K-612 GLOBAL 0.01 1.19 -0.48 M1-209 GLOBAL 0.00 -0.71 1.28 M1-211 GLOBAL 0.00 -0.43 -4.28 M2-409 GLOBAL 0.00 0.66 0.45 M2-411 GLOBAL 0.00 0.94 -3.29 M3-609 GLOBAL 0.00 1.16 -0.16 M3-611 GLOBAL 0.00 1.46 -2.78 TC-705 GLOBAL 0.02 1.19 -0.37 TC-706 GLOBAL 0.05 1.06 -0.38 TC-707 GLOBAL -0.05 1.06 -0.38 TC-708 GLOBAL -0.02 1.19 -0.37 TC-709 GLOBAL -0.04 0.94 -0.40 TC-710 GLOBAL -0.02 1.05 -0.34 TC-711 GLOBAL 0.02 1.05 -0.34 TC-712 GLOBAL 0.04 0.94 -0.40 TC-713 GLOBAL 0.12 0.94 -0.33 TC-714 GLOBAL 0.07 0.72 -0.24 TC-715 GLOBAL -0.07 0.72 -0.24 TC-716 GLOBAL -0.12 0.94 -0.33 TC-717 GLOBAL -0.12 0.53 -0.36 TC-718 GLOBAL -0.06 0.74 -0.23 TC-719 GLOBAL 0.06 0.74 -0.23 TC-720 GLOBAL 0.12 0.53 -0.36 E9-729 GLOBAL 0.25 0.63 -0.19 E9-730 GLOBAL 0.08 0.28 -0.12 E9-731 GLOBAL -0.08 0.28 -0.12 E9-732 GLOBAL -0.25 0.63 -0.19 E9-737 GLOBAL -0.01 0.40 -0.19 E9-738 GLOBAL -0.01 0.42 -0.13 E9-739 GLOBAL 0.01 0.42 -0.13 E9-740 GLOBAL 0.01 0.40 -0.19 E9-741 GLOBAL -0.29 0.13 -0.23 E9-742 GLOBAL -0.23 0.66 -0.19 E9-743 GLOBAL 0.23 0.66 -0.19 E9-744 GLOBAL 0.29 0.13 -0.23 9K-737 GLOBAL 0.00 0.35 0.07 9K-738 GLOBAL -0.04 0.38 0.02 9K-739 GLOBAL 0.00 0.47 -0.05 9K-740 GLOBAL 0.08 0.38 0.02 9KT-741 GLOBAL -0.19 0.32 -0.02 9KT-742 GLOBAL -0.21 0.47 -0.13 9KT-743 GLOBAL 0.21 0.47 -0.13 9KT-744 GLOBAL 0.19 0.32 -0.02 9KL-741 GLOBAL -0.10 0.20 -0.04 9KL-742 GLOBAL -0.05 0.60 -0.11 9KL-743 GLOBAL 0.05 0.60 -0.11 9KL-744 GLOBAL 0.10 0.20 -0.04

102/117


-------------------------------------------------------------------------- --- LOADING - VIfs Mantenimiento ( Fase sup. 30§ ) --- -------------------------------------------------------------------------- RESULTANT JOINT DISPLACEMENTS SUPPORTS JOINT /-----------------DISPLACEMENT-----------------/ X DISP. Y DISP. Z DISP. 9P8-801 GLOBAL 0.00 0.00 0.00 9P8-802 GLOBAL 0.00 0.00 0.00 9P8-803 GLOBAL 0.00 0.00 0.00 9P8-804 GLOBAL 0.00 0.00 0.00 RESULTANT JOINT DISPLACEMENTS FREE JOINTS JOINT /-----------------DISPLACEMENT-----------------/ X DISP. Y DISP. Z DISP. C-1 GLOBAL -0.04 -3.83 -0.10 C-2 GLOBAL 0.03 -3.87 -1.15 C-3 GLOBAL 0.05 -3.86 -1.15 C-4 GLOBAL -0.04 -3.82 -0.10 C-5 GLOBAL 0.00 -3.15 -0.11 C-6 GLOBAL 0.01 -3.11 -1.13 C-7 GLOBAL -0.01 -3.11 -1.13 C-8 GLOBAL 0.00 -3.15 -0.12 CX-1 GLOBAL -0.01 -3.82 2.20 CX-3 GLOBAL 0.01 -4.04 -5.00 TS-105 GLOBAL 0.05 -2.61 -0.12 TS-106 GLOBAL 0.12 -2.51 -1.11 TS-107 GLOBAL -0.12 -2.51 -1.11 TS-108 GLOBAL -0.05 -2.61 -0.12 TS-109 GLOBAL 0.00 -1.93 -0.13 TS-110 GLOBAL -0.04 -2.04 -1.09 TS-111 GLOBAL 0.04 -2.04 -1.09 TS-112 GLOBAL 0.00 -1.93 -0.13 TS-205 GLOBAL -0.04 -1.45 -0.15 TS-206 GLOBAL -0.02 -1.53 -1.04 TS-207 GLOBAL 0.02 -1.53 -1.04 TS-208 GLOBAL 0.05 -1.45 -0.15 TS-209 GLOBAL 0.00 -1.23 -0.17 TS-210 GLOBAL 0.05 -1.16 -1.00 TS-211 GLOBAL -0.05 -1.16 -1.00 TS-212 GLOBAL 0.00 -1.23 -0.17 TS-305 GLOBAL 0.02 -0.87 -0.20 TS-306 GLOBAL 0.13 -0.82 -0.95 TS-307 GLOBAL -0.13 -0.82 -0.95 TS-308 GLOBAL -0.02 -0.87 -0.20 TS-309 GLOBAL 0.06 -0.47 -0.23 TS-310 GLOBAL 0.05 -0.52 -0.89 TS-311 GLOBAL -0.05 -0.52 -0.89 TS-312 GLOBAL -0.06 -0.47 -0.23 TS-313 GLOBAL -0.07 -0.25 -0.25 TS-314 GLOBAL -0.03 -0.20 -0.84 TS-315 GLOBAL 0.03 -0.20 -0.84 TS-316 GLOBAL 0.07 -0.25 -0.25

103/117


TS-317 GLOBAL 0.00 0.09 -0.27 TS-318 GLOBAL -0.02 0.02 -0.79 TS-319 GLOBAL 0.02 0.02 -0.79 TS-320 GLOBAL 0.00 0.09 -0.27 TS-405 GLOBAL 0.02 0.34 -0.29 TS-406 GLOBAL 0.08 0.29 -0.75 TS-407 GLOBAL -0.08 0.29 -0.75 TS-408 GLOBAL -0.02 0.34 -0.29 TS-409 GLOBAL 0.00 0.44 -0.31 TS-410 GLOBAL 0.04 0.48 -0.70 TS-411 GLOBAL -0.03 0.48 -0.70 TS-412 GLOBAL 0.00 0.44 -0.31 TS-505 GLOBAL -0.06 0.58 -0.32 TS-506 GLOBAL -0.04 0.60 -0.66 TS-507 GLOBAL 0.04 0.60 -0.66 TS-508 GLOBAL 0.06 0.58 -0.32 TS-509 GLOBAL -0.04 0.77 -0.34 TS-510 GLOBAL -0.09 0.73 -0.63 TS-511 GLOBAL 0.09 0.73 -0.63 TS-512 GLOBAL 0.04 0.77 -0.34 TS-513 GLOBAL 0.04 0.80 -0.35 TS-514 GLOBAL 0.11 0.86 -0.59 TS-515 GLOBAL -0.11 0.86 -0.59 TS-516 GLOBAL -0.04 0.80 -0.35 TS-517 GLOBAL 0.00 0.98 -0.35 TS-518 GLOBAL -0.02 0.90 -0.56 TS-519 GLOBAL 0.02 0.90 -0.56 TS-520 GLOBAL 0.00 0.98 -0.35 TS-605 GLOBAL -0.03 1.10 -0.36 TS-606 GLOBAL -0.03 1.03 -0.53 TS-607 GLOBAL 0.03 1.03 -0.53 TS-608 GLOBAL 0.03 1.10 -0.36 TS-609 GLOBAL 0.00 1.09 -0.37 TS-610 GLOBAL 0.00 1.15 -0.50 TS-611 GLOBAL 0.00 1.15 -0.50 TS-612 GLOBAL 0.00 1.09 -0.37 K-5 GLOBAL 0.00 -3.11 -0.16 K-6 GLOBAL -0.02 -3.13 -0.60 K-7 GLOBAL 0.00 -3.15 -1.21 K-8 GLOBAL 0.02 -3.13 -0.68 K-109 GLOBAL 0.00 -2.02 -0.08 K-111 GLOBAL 0.00 -1.93 -1.01 K-209 GLOBAL 0.00 -1.18 -0.22 K-210 GLOBAL -0.02 -1.20 -0.51 K-211 GLOBAL 0.00 -1.21 -1.08 K-212 GLOBAL 0.02 -1.20 -0.70 K-317 GLOBAL 0.00 0.03 -0.32 K-319 GLOBAL 0.00 0.09 -0.87 K-409 GLOBAL 0.00 0.47 -0.26 K-410 GLOBAL -0.01 0.46 -0.50 K-411 GLOBAL 0.00 0.45 -0.62 K-412 GLOBAL 0.01 0.46 -0.58 K-517 GLOBAL 0.00 0.92 -0.31 K-519 GLOBAL 0.00 0.97 -0.48 K-609 GLOBAL 0.00 1.13 -0.41 K-610 GLOBAL -0.01 1.12 -0.44 K-611 GLOBAL 0.00 1.11 -0.58 K-612 GLOBAL 0.01 1.12 -0.49 M1-209 GLOBAL 0.00 -1.24 1.66 M1-211 GLOBAL 0.00 -0.84 -5.55 M2-409 GLOBAL 0.00 0.44 0.62

104/117


M2-411 GLOBAL 0.00 0.72 -3.50 M3-609 GLOBAL 0.00 1.08 -0.07 M3-611 GLOBAL 0.00 1.39 -2.91 TC-705 GLOBAL 0.02 1.14 -0.36 TC-706 GLOBAL 0.06 1.01 -0.41 TC-707 GLOBAL -0.06 1.01 -0.41 TC-708 GLOBAL -0.02 1.14 -0.36 TC-709 GLOBAL -0.04 0.91 -0.39 TC-710 GLOBAL -0.02 1.02 -0.37 TC-711 GLOBAL 0.02 1.02 -0.37 TC-712 GLOBAL 0.04 0.91 -0.39 TC-713 GLOBAL 0.12 0.93 -0.33 TC-714 GLOBAL 0.08 0.70 -0.26 TC-715 GLOBAL -0.08 0.70 -0.26 TC-716 GLOBAL -0.12 0.93 -0.33 TC-717 GLOBAL -0.12 0.54 -0.36 TC-718 GLOBAL -0.07 0.75 -0.25 TC-719 GLOBAL 0.07 0.75 -0.25 TC-720 GLOBAL 0.12 0.54 -0.36 E9-729 GLOBAL 0.24 0.65 -0.19 E9-730 GLOBAL 0.09 0.30 -0.13 E9-731 GLOBAL -0.09 0.30 -0.13 E9-732 GLOBAL -0.24 0.65 -0.19 E9-737 GLOBAL -0.01 0.42 -0.19 E9-738 GLOBAL -0.01 0.45 -0.15 E9-739 GLOBAL 0.01 0.45 -0.15 E9-740 GLOBAL 0.01 0.42 -0.19 E9-741 GLOBAL -0.29 0.16 -0.23 E9-742 GLOBAL -0.23 0.69 -0.20 E9-743 GLOBAL 0.23 0.69 -0.20 E9-744 GLOBAL 0.29 0.16 -0.23 9K-737 GLOBAL 0.00 0.38 0.08 9K-738 GLOBAL -0.04 0.40 0.02 9K-739 GLOBAL 0.00 0.49 -0.05 9K-740 GLOBAL 0.08 0.40 0.02 9KT-741 GLOBAL -0.19 0.35 -0.01 9KT-742 GLOBAL -0.21 0.51 -0.14 9KT-743 GLOBAL 0.21 0.51 -0.14 9KT-744 GLOBAL 0.19 0.35 -0.01 9KL-741 GLOBAL -0.10 0.23 -0.04 9KL-742 GLOBAL -0.05 0.63 -0.12 9KL-743 GLOBAL 0.05 0.63 -0.12 9KL-744 GLOBAL 0.10 0.23 -0.04 -------------------------------------------------------------------------- --- LOADING - VIfi Mantenimiento ( Fase inf. 30§ ) --- -------------------------------------------------------------------------- RESULTANT JOINT DISPLACEMENTS SUPPORTS JOINT /-----------------DISPLACEMENT-----------------/ X DISP. Y DISP. Z DISP. 9P8-801 GLOBAL 0.00 0.00 0.00 9P8-802 GLOBAL 0.00 0.00 0.00 9P8-803 GLOBAL 0.00 0.00 0.00 9P8-804 GLOBAL 0.00 0.00 0.00

105/117


RESULTANT JOINT DISPLACEMENTS FREE JOINTS JOINT /-----------------DISPLACEMENT-----------------/ X DISP. Y DISP. Z DISP. C-1 GLOBAL -0.04 -2.81 -0.19 C-2 GLOBAL 0.03 -2.84 -1.00 C-3 GLOBAL 0.05 -2.84 -1.00 C-4 GLOBAL -0.04 -2.80 -0.19 C-5 GLOBAL 0.00 -2.28 -0.20 C-6 GLOBAL 0.01 -2.24 -0.98 C-7 GLOBAL -0.01 -2.24 -0.98 C-8 GLOBAL 0.00 -2.28 -0.21 CX-1 GLOBAL -0.01 -2.79 1.58 CX-3 GLOBAL 0.01 -3.02 -4.32 TS-105 GLOBAL 0.04 -1.86 -0.21 TS-106 GLOBAL 0.12 -1.80 -0.96 TS-107 GLOBAL -0.12 -1.80 -0.96 TS-108 GLOBAL -0.04 -1.86 -0.21 TS-109 GLOBAL 0.00 -1.36 -0.22 TS-110 GLOBAL -0.02 -1.43 -0.94 TS-111 GLOBAL 0.02 -1.43 -0.94 TS-112 GLOBAL 0.00 -1.36 -0.22 TS-205 GLOBAL -0.04 -1.02 -0.24 TS-206 GLOBAL -0.03 -1.07 -0.91 TS-207 GLOBAL 0.03 -1.07 -0.91 TS-208 GLOBAL 0.04 -1.02 -0.24 TS-209 GLOBAL 0.00 -0.85 -0.25 TS-210 GLOBAL 0.04 -0.80 -0.88 TS-211 GLOBAL -0.03 -0.80 -0.88 TS-212 GLOBAL 0.00 -0.85 -0.25 TS-305 GLOBAL 0.03 -0.58 -0.27 TS-306 GLOBAL 0.12 -0.55 -0.84 TS-307 GLOBAL -0.12 -0.55 -0.84 TS-308 GLOBAL -0.03 -0.58 -0.27 TS-309 GLOBAL 0.05 -0.28 -0.29 TS-310 GLOBAL 0.06 -0.31 -0.80 TS-311 GLOBAL -0.06 -0.31 -0.80 TS-312 GLOBAL -0.05 -0.28 -0.29 TS-313 GLOBAL -0.06 -0.12 -0.30 TS-314 GLOBAL -0.05 -0.07 -0.77 TS-315 GLOBAL 0.05 -0.07 -0.77 TS-316 GLOBAL 0.06 -0.12 -0.30 TS-317 GLOBAL 0.00 0.16 -0.31 TS-318 GLOBAL -0.02 0.09 -0.73 TS-319 GLOBAL 0.02 0.09 -0.73 TS-320 GLOBAL 0.00 0.16 -0.31 TS-405 GLOBAL 0.02 0.38 -0.32 TS-406 GLOBAL 0.08 0.33 -0.70 TS-407 GLOBAL -0.08 0.33 -0.70 TS-408 GLOBAL -0.02 0.38 -0.32 TS-409 GLOBAL 0.00 0.46 -0.33 TS-410 GLOBAL 0.04 0.50 -0.66 TS-411 GLOBAL -0.03 0.50 -0.66 TS-412 GLOBAL 0.00 0.46 -0.33 TS-505 GLOBAL -0.06 0.58 -0.34 TS-506 GLOBAL -0.05 0.58 -0.64 TS-507 GLOBAL 0.05 0.58 -0.64 TS-508 GLOBAL 0.06 0.58 -0.34

106/117


TS-509 GLOBAL -0.04 0.72 -0.36 TS-510 GLOBAL -0.09 0.71 -0.61 TS-511 GLOBAL 0.09 0.71 -0.61 TS-512 GLOBAL 0.04 0.72 -0.36 TS-513 GLOBAL 0.04 0.74 -0.36 TS-514 GLOBAL 0.10 0.83 -0.58 TS-515 GLOBAL -0.10 0.82 -0.58 TS-516 GLOBAL -0.04 0.74 -0.36 TS-517 GLOBAL 0.00 0.94 -0.36 TS-518 GLOBAL -0.04 0.84 -0.56 TS-519 GLOBAL 0.04 0.84 -0.56 TS-520 GLOBAL 0.00 0.94 -0.36 TS-605 GLOBAL -0.03 1.11 -0.36 TS-606 GLOBAL -0.04 1.01 -0.53 TS-607 GLOBAL 0.04 1.01 -0.53 TS-608 GLOBAL 0.03 1.11 -0.36 TS-609 GLOBAL 0.00 1.07 -0.37 TS-610 GLOBAL 0.01 1.16 -0.51 TS-611 GLOBAL -0.01 1.16 -0.51 TS-612 GLOBAL 0.00 1.07 -0.37 K-5 GLOBAL 0.00 -2.24 -0.25 K-6 GLOBAL -0.01 -2.26 -0.57 K-7 GLOBAL 0.00 -2.27 -1.06 K-8 GLOBAL 0.01 -2.26 -0.65 K-109 GLOBAL 0.00 -1.42 -0.18 K-111 GLOBAL 0.00 -1.36 -0.86 K-209 GLOBAL 0.00 -0.81 -0.30 K-210 GLOBAL -0.01 -0.82 -0.53 K-211 GLOBAL 0.00 -0.83 -0.96 K-212 GLOBAL 0.01 -0.82 -0.65 K-317 GLOBAL 0.00 0.10 -0.36 K-319 GLOBAL 0.00 0.16 -0.81 K-409 GLOBAL 0.00 0.49 -0.29 K-410 GLOBAL -0.01 0.48 -0.48 K-411 GLOBAL 0.00 0.47 -0.59 K-412 GLOBAL 0.01 0.48 -0.58 K-517 GLOBAL 0.00 0.85 -0.31 K-519 GLOBAL 0.00 0.94 -0.48 K-609 GLOBAL 0.00 1.12 -0.41 K-610 GLOBAL -0.01 1.11 -0.39 K-611 GLOBAL 0.00 1.10 -0.58 K-612 GLOBAL 0.01 1.11 -0.52 M1-209 GLOBAL 0.00 -0.85 1.08 M1-211 GLOBAL 0.00 -0.57 -4.10 M2-409 GLOBAL 0.00 0.45 0.44 M2-411 GLOBAL 0.00 0.73 -3.30 M3-609 GLOBAL 0.00 1.07 -0.02 M3-611 GLOBAL 0.00 1.50 -3.88 TC-705 GLOBAL 0.02 1.15 -0.36 TC-706 GLOBAL 0.06 0.99 -0.41 TC-707 GLOBAL -0.06 0.99 -0.41 TC-708 GLOBAL -0.02 1.15 -0.36 TC-709 GLOBAL -0.04 0.90 -0.39 TC-710 GLOBAL -0.02 1.03 -0.37 TC-711 GLOBAL 0.02 1.03 -0.37 TC-712 GLOBAL 0.04 0.90 -0.39 TC-713 GLOBAL 0.12 0.94 -0.32 TC-714 GLOBAL 0.07 0.70 -0.26 TC-715 GLOBAL -0.07 0.70 -0.26 TC-716 GLOBAL -0.12 0.94 -0.32 TC-717 GLOBAL -0.12 0.53 -0.36

107/117


TC-718 GLOBAL -0.06 0.76 -0.25 TC-719 GLOBAL 0.06 0.76 -0.25 TC-720 GLOBAL 0.12 0.53 -0.36 E9-729 GLOBAL 0.24 0.66 -0.19 E9-730 GLOBAL 0.09 0.30 -0.13 E9-731 GLOBAL -0.09 0.30 -0.13 E9-732 GLOBAL -0.24 0.66 -0.19 E9-737 GLOBAL -0.01 0.43 -0.18 E9-738 GLOBAL -0.01 0.45 -0.15 E9-739 GLOBAL 0.01 0.45 -0.15 E9-740 GLOBAL 0.01 0.43 -0.18 E9-741 GLOBAL -0.28 0.16 -0.23 E9-742 GLOBAL -0.23 0.69 -0.20 E9-743 GLOBAL 0.23 0.69 -0.20 E9-744 GLOBAL 0.29 0.16 -0.23 9K-737 GLOBAL 0.00 0.38 0.08 9K-738 GLOBAL -0.04 0.41 0.03 9K-739 GLOBAL 0.00 0.50 -0.05 9K-740 GLOBAL 0.08 0.41 0.02 9KT-741 GLOBAL -0.19 0.35 -0.01 9KT-742 GLOBAL -0.21 0.51 -0.14 9KT-743 GLOBAL 0.21 0.51 -0.14 9KT-744 GLOBAL 0.19 0.35 -0.01 9KL-741 GLOBAL -0.10 0.24 -0.04 9KL-742 GLOBAL -0.05 0.63 -0.12 9KL-743 GLOBAL 0.05 0.63 -0.12 9KL-744 GLOBAL 0.10 0.24 -0.04 -------------------------------------------------------------------------- --- LOADING - VIg2 Mantenimiento ( OPGW 30§ ) --- -------------------------------------------------------------------------- RESULTANT JOINT DISPLACEMENTS SUPPORTS JOINT /-----------------DISPLACEMENT-----------------/ X DISP. Y DISP. Z DISP. 9P8-801 GLOBAL 0.00 0.00 0.00 9P8-802 GLOBAL 0.00 0.00 0.00 9P8-803 GLOBAL 0.00 0.00 0.00 9P8-804 GLOBAL 0.00 0.00 0.00 RESULTANT JOINT DISPLACEMENTS FREE JOINTS JOINT /-----------------DISPLACEMENT-----------------/ X DISP. Y DISP. Z DISP. C-1 GLOBAL -0.05 18.87 -1.97 C-2 GLOBAL 0.03 18.77 0.12 C-3 GLOBAL 0.05 18.78 0.13 C-4 GLOBAL -0.02 18.88 -1.97 C-5 GLOBAL 0.02 17.39 -1.95 C-6 GLOBAL 0.01 17.48 0.11 C-7 GLOBAL -0.01 17.48 0.11

108/117


C-8 GLOBAL -0.02 17.39 -1.96 CX-1 GLOBAL -0.01 19.25 -9.48 CX-3 GLOBAL 0.01 18.58 3.36 TS-105 GLOBAL 0.14 16.13 -1.92 TS-106 GLOBAL 0.05 16.25 0.10 TS-107 GLOBAL -0.05 16.25 0.10 TS-108 GLOBAL -0.14 16.12 -1.92 TS-109 GLOBAL -0.02 15.07 -1.89 TS-110 GLOBAL -0.02 14.93 0.09 TS-111 GLOBAL 0.02 14.93 0.09 TS-112 GLOBAL 0.02 15.07 -1.89 TS-205 GLOBAL -0.04 14.37 -1.86 TS-206 GLOBAL -0.03 14.27 0.10 TS-207 GLOBAL 0.03 14.27 0.10 TS-208 GLOBAL 0.04 14.37 -1.86 TS-209 GLOBAL 0.03 13.61 -1.82 TS-210 GLOBAL 0.04 13.70 0.10 TS-211 GLOBAL -0.04 13.70 0.10 TS-212 GLOBAL -0.03 13.61 -1.82 TS-305 GLOBAL 0.13 12.60 -1.78 TS-306 GLOBAL 0.05 12.65 0.10 TS-307 GLOBAL -0.05 12.65 0.10 TS-308 GLOBAL -0.13 12.60 -1.78 TS-309 GLOBAL 0.06 11.73 -1.75 TS-310 GLOBAL 0.06 11.67 0.09 TS-311 GLOBAL -0.06 11.67 0.09 TS-312 GLOBAL -0.06 11.72 -1.75 TS-313 GLOBAL -0.03 10.66 -1.69 TS-314 GLOBAL -0.06 10.77 0.08 TS-315 GLOBAL 0.06 10.77 0.08 TS-316 GLOBAL 0.03 10.66 -1.69 TS-317 GLOBAL -0.02 9.91 -1.63 TS-318 GLOBAL -0.02 9.79 0.07 TS-319 GLOBAL 0.02 9.79 0.07 TS-320 GLOBAL 0.02 9.91 -1.63 TS-405 GLOBAL 0.10 9.28 -1.58 TS-406 GLOBAL 0.03 9.18 0.06 TS-407 GLOBAL -0.03 9.18 0.06 TS-408 GLOBAL -0.10 9.28 -1.58 TS-409 GLOBAL 0.03 8.65 -1.52 TS-410 GLOBAL 0.04 8.72 0.05 TS-411 GLOBAL -0.04 8.72 0.05 TS-412 GLOBAL -0.03 8.65 -1.52 TS-505 GLOBAL -0.04 7.80 -1.47 TS-506 GLOBAL -0.07 7.83 0.03 TS-507 GLOBAL 0.07 7.83 0.03 TS-508 GLOBAL 0.04 7.80 -1.47 TS-509 GLOBAL -0.12 7.10 -1.42 TS-510 GLOBAL -0.04 7.05 0.01 TS-511 GLOBAL 0.04 7.05 0.01 TS-512 GLOBAL 0.12 7.10 -1.42 TS-513 GLOBAL 0.15 6.22 -1.36 TS-514 GLOBAL 0.03 6.33 -0.01 TS-515 GLOBAL -0.03 6.33 -0.01 TS-516 GLOBAL -0.15 6.22 -1.36 TS-517 GLOBAL -0.02 5.69 -1.29 TS-518 GLOBAL -0.02 5.56 -0.04 TS-519 GLOBAL 0.02 5.56 -0.04 TS-520 GLOBAL 0.02 5.69 -1.29 TS-605 GLOBAL -0.02 5.21 -1.23 TS-606 GLOBAL -0.05 5.09 -0.06

109/117


TS-607 GLOBAL 0.05 5.09 -0.06 TS-608 GLOBAL 0.02 5.21 -1.23 TS-609 GLOBAL -0.03 4.71 -1.18 TS-610 GLOBAL 0.03 4.81 -0.08 TS-611 GLOBAL -0.03 4.81 -0.08 TS-612 GLOBAL 0.03 4.71 -1.18 K-5 GLOBAL 0.00 17.47 -2.04 K-6 GLOBAL -0.04 17.44 -0.95 K-7 GLOBAL 0.00 17.40 0.06 K-8 GLOBAL 0.04 17.44 -0.87 K-109 GLOBAL 0.00 14.95 -1.80 K-111 GLOBAL 0.00 15.06 0.15 K-209 GLOBAL 0.00 13.68 -1.91 K-210 GLOBAL -0.02 13.66 -0.88 K-211 GLOBAL 0.00 13.64 0.05 K-212 GLOBAL 0.02 13.66 -0.89 K-317 GLOBAL 0.00 9.80 -1.72 K-319 GLOBAL 0.00 9.90 0.01 K-409 GLOBAL 0.00 8.70 -1.44 K-410 GLOBAL -0.02 8.69 -0.77 K-411 GLOBAL 0.00 8.67 0.10 K-412 GLOBAL 0.02 8.68 -0.76 K-517 GLOBAL 0.00 5.57 -1.20 K-519 GLOBAL 0.00 5.68 0.01 K-609 GLOBAL 0.00 4.77 -1.27 K-610 GLOBAL -0.01 4.76 -0.66 K-611 GLOBAL 0.00 4.75 -0.13 K-612 GLOBAL 0.01 4.76 -0.64 M1-209 GLOBAL 0.00 13.44 -7.04 M1-211 GLOBAL 0.00 13.93 1.79 M2-409 GLOBAL 0.00 8.47 -6.28 M2-411 GLOBAL 0.00 8.96 1.32 M3-609 GLOBAL 0.00 4.53 -5.48 M3-611 GLOBAL 0.00 5.06 0.31 TC-705 GLOBAL 0.20 3.92 -1.11 TC-706 GLOBAL -0.08 3.71 0.00 TC-707 GLOBAL 0.08 3.71 0.00 TC-708 GLOBAL -0.19 3.92 -1.11 TC-709 GLOBAL -0.10 2.77 -1.12 TC-710 GLOBAL 0.02 2.93 0.05 TC-711 GLOBAL -0.02 2.93 0.05 TC-712 GLOBAL 0.10 2.77 -1.12 TC-713 GLOBAL 0.37 2.07 -0.92 TC-714 GLOBAL -0.11 1.74 0.10 TC-715 GLOBAL 0.11 1.74 0.10 TC-716 GLOBAL -0.37 2.07 -0.92 TC-717 GLOBAL -0.27 0.88 -0.94 TC-718 GLOBAL 0.04 1.16 0.12 TC-719 GLOBAL -0.04 1.16 0.12 TC-720 GLOBAL 0.27 0.88 -0.94 E9-729 GLOBAL 0.61 0.49 -0.59 E9-730 GLOBAL -0.15 0.00 0.16 E9-731 GLOBAL 0.15 0.00 0.16 E9-732 GLOBAL -0.61 0.49 -0.59 E9-737 GLOBAL -0.01 -0.11 -0.59 E9-738 GLOBAL -0.01 -0.08 0.14 E9-739 GLOBAL 0.01 -0.08 0.14 E9-740 GLOBAL 0.01 -0.11 -0.59 E9-741 GLOBAL -0.42 -0.51 -0.62 E9-742 GLOBAL -0.14 0.07 0.08 E9-743 GLOBAL 0.14 0.07 0.08

110/117


E9-744 GLOBAL 0.42 -0.50 -0.62 9K-737 GLOBAL 0.00 -0.15 0.07 9K-738 GLOBAL -0.06 -0.10 0.04 9K-739 GLOBAL 0.00 -0.04 -0.03 9K-740 GLOBAL 0.06 -0.10 0.04 9KT-741 GLOBAL -0.20 -0.32 -0.20 9KT-742 GLOBAL -0.20 -0.11 0.03 9KT-743 GLOBAL 0.20 -0.11 0.03 9KT-744 GLOBAL 0.20 -0.32 -0.20 9KL-741 GLOBAL -0.23 -0.41 -0.19 9KL-742 GLOBAL 0.04 -0.02 0.01 9KL-743 GLOBAL -0.04 -0.02 0.01 9KL-744 GLOBAL 0.24 -0.41 -0.19 -------------------------------------------------------------------------- --- LOADING - VIfs2 Mantenimiento ( Fase sup. 30§ ) --- -------------------------------------------------------------------------- RESULTANT JOINT DISPLACEMENTS SUPPORTS JOINT /-----------------DISPLACEMENT-----------------/ X DISP. Y DISP. Z DISP. 9P8-801 GLOBAL 0.00 0.00 0.00 9P8-802 GLOBAL 0.00 0.00 0.00 9P8-803 GLOBAL 0.00 0.00 0.00 9P8-804 GLOBAL 0.00 0.00 0.00 RESULTANT JOINT DISPLACEMENTS FREE JOINTS JOINT /-----------------DISPLACEMENT-----------------/ X DISP. Y DISP. Z DISP. C-1 GLOBAL -0.05 19.68 -2.04 C-2 GLOBAL 0.03 19.60 0.13 C-3 GLOBAL 0.05 19.61 0.13 C-4 GLOBAL -0.03 19.69 -2.04 C-5 GLOBAL 0.01 18.22 -2.03 C-6 GLOBAL 0.01 18.29 0.12 C-7 GLOBAL -0.01 18.29 0.13 C-8 GLOBAL -0.01 18.22 -2.03 CX-1 GLOBAL -0.01 19.93 -8.63 CX-3 GLOBAL 0.01 19.42 3.46 TS-105 GLOBAL 0.11 16.86 -2.01 TS-106 GLOBAL 0.08 17.02 0.13 TS-107 GLOBAL -0.08 17.02 0.13 TS-108 GLOBAL -0.11 16.86 -2.02 TS-109 GLOBAL -0.04 15.76 -2.00 TS-110 GLOBAL -0.02 15.59 0.13 TS-111 GLOBAL 0.02 15.59 0.13 TS-112 GLOBAL 0.04 15.76 -2.00 TS-205 GLOBAL -0.02 14.95 -1.96 TS-206 GLOBAL -0.04 14.82 0.14 TS-207 GLOBAL 0.04 14.82 0.14 TS-208 GLOBAL 0.02 14.95 -1.96 TS-209 GLOBAL 0.04 14.12 -1.92

111/117


TS-210 GLOBAL 0.04 14.23 0.14 TS-211 GLOBAL -0.04 14.23 0.14 TS-212 GLOBAL -0.04 14.12 -1.92 TS-305 GLOBAL 0.12 13.05 -1.88 TS-306 GLOBAL 0.05 13.11 0.13 TS-307 GLOBAL -0.05 13.10 0.13 TS-308 GLOBAL -0.12 13.05 -1.88 TS-309 GLOBAL 0.04 12.12 -1.83 TS-310 GLOBAL 0.07 12.05 0.12 TS-311 GLOBAL -0.07 12.05 0.12 TS-312 GLOBAL -0.04 12.12 -1.83 TS-313 GLOBAL -0.01 11.00 -1.76 TS-314 GLOBAL -0.08 11.10 0.11 TS-315 GLOBAL 0.08 11.10 0.11 TS-316 GLOBAL 0.01 11.00 -1.76 TS-317 GLOBAL -0.02 10.20 -1.70 TS-318 GLOBAL -0.02 10.07 0.09 TS-319 GLOBAL 0.02 10.07 0.09 TS-320 GLOBAL 0.02 10.20 -1.70 TS-405 GLOBAL 0.09 9.53 -1.64 TS-406 GLOBAL 0.03 9.44 0.08 TS-407 GLOBAL -0.03 9.44 0.08 TS-408 GLOBAL -0.09 9.53 -1.64 TS-409 GLOBAL 0.03 8.87 -1.58 TS-410 GLOBAL 0.04 8.95 0.07 TS-411 GLOBAL -0.04 8.95 0.07 TS-412 GLOBAL -0.03 8.87 -1.58 TS-505 GLOBAL -0.02 7.99 -1.53 TS-506 GLOBAL -0.08 8.02 0.04 TS-507 GLOBAL 0.08 8.02 0.04 TS-508 GLOBAL 0.02 7.99 -1.53 TS-509 GLOBAL -0.11 7.26 -1.47 TS-510 GLOBAL -0.05 7.21 0.02 TS-511 GLOBAL 0.05 7.21 0.02 TS-512 GLOBAL 0.11 7.26 -1.47 TS-513 GLOBAL 0.14 6.35 -1.40 TS-514 GLOBAL 0.03 6.46 0.00 TS-515 GLOBAL -0.03 6.46 0.00 TS-516 GLOBAL -0.14 6.35 -1.40 TS-517 GLOBAL -0.02 5.80 -1.33 TS-518 GLOBAL -0.02 5.66 -0.03 TS-519 GLOBAL 0.02 5.66 -0.03 TS-520 GLOBAL 0.02 5.80 -1.33 TS-605 GLOBAL -0.01 5.29 -1.27 TS-606 GLOBAL -0.06 5.18 -0.05 TS-607 GLOBAL 0.06 5.18 -0.05 TS-608 GLOBAL 0.01 5.29 -1.27 TS-609 GLOBAL -0.03 4.78 -1.21 TS-610 GLOBAL 0.03 4.89 -0.07 TS-611 GLOBAL -0.03 4.89 -0.07 TS-612 GLOBAL 0.03 4.78 -1.21 K-5 GLOBAL 0.00 18.28 -2.11 K-6 GLOBAL -0.03 18.25 -0.96 K-7 GLOBAL 0.00 18.22 0.06 K-8 GLOBAL 0.03 18.25 -0.94 K-109 GLOBAL 0.00 15.61 -1.92 K-111 GLOBAL 0.00 15.75 0.20 K-209 GLOBAL 0.00 14.20 -2.00 K-210 GLOBAL -0.02 14.18 -0.94 K-211 GLOBAL 0.00 14.15 0.08 K-212 GLOBAL 0.02 14.18 -0.87

112/117


K-317 GLOBAL 0.00 10.08 -1.77 K-319 GLOBAL 0.00 10.19 0.03 K-409 GLOBAL 0.00 8.93 -1.51 K-410 GLOBAL -0.02 8.91 -0.79 K-411 GLOBAL 0.00 8.90 0.13 K-412 GLOBAL 0.02 8.91 -0.79 K-517 GLOBAL 0.00 5.68 -1.26 K-519 GLOBAL 0.00 5.79 0.03 K-609 GLOBAL 0.00 4.85 -1.29 K-610 GLOBAL -0.01 4.83 -0.67 K-611 GLOBAL 0.00 4.82 -0.14 K-612 GLOBAL 0.01 4.83 -0.66 M1-209 GLOBAL 0.00 13.85 -8.31 M1-211 GLOBAL 0.00 14.46 2.18 M2-409 GLOBAL 0.00 8.70 -6.49 M2-411 GLOBAL 0.00 9.18 1.49 M3-609 GLOBAL 0.00 4.61 -5.61 M3-611 GLOBAL 0.00 5.13 0.39 TC-705 GLOBAL 0.20 3.97 -1.14 TC-706 GLOBAL -0.08 3.76 0.00 TC-707 GLOBAL 0.08 3.76 0.00 TC-708 GLOBAL -0.20 3.97 -1.14 TC-709 GLOBAL -0.10 2.80 -1.15 TC-710 GLOBAL 0.02 2.96 0.05 TC-711 GLOBAL -0.02 2.96 0.05 TC-712 GLOBAL 0.10 2.80 -1.15 TC-713 GLOBAL 0.38 2.08 -0.94 TC-714 GLOBAL -0.11 1.75 0.10 TC-715 GLOBAL 0.11 1.75 0.10 TC-716 GLOBAL -0.38 2.08 -0.94 TC-717 GLOBAL -0.28 0.87 -0.97 TC-718 GLOBAL 0.04 1.15 0.12 TC-719 GLOBAL -0.04 1.15 0.12 TC-720 GLOBAL 0.28 0.87 -0.97 E9-729 GLOBAL 0.62 0.48 -0.60 E9-730 GLOBAL -0.15 -0.02 0.16 E9-731 GLOBAL 0.15 -0.02 0.16 E9-732 GLOBAL -0.62 0.48 -0.60 E9-737 GLOBAL -0.01 -0.14 -0.60 E9-738 GLOBAL -0.01 -0.11 0.15 E9-739 GLOBAL 0.01 -0.11 0.15 E9-740 GLOBAL 0.01 -0.13 -0.60 E9-741 GLOBAL -0.42 -0.54 -0.63 E9-742 GLOBAL -0.14 0.04 0.09 E9-743 GLOBAL 0.14 0.04 0.09 E9-744 GLOBAL 0.42 -0.54 -0.63 9K-737 GLOBAL 0.00 -0.18 0.07 9K-738 GLOBAL -0.06 -0.12 0.04 9K-739 GLOBAL 0.00 -0.07 -0.03 9K-740 GLOBAL 0.06 -0.12 0.04 9KT-741 GLOBAL -0.20 -0.35 -0.21 9KT-742 GLOBAL -0.20 -0.14 0.03 9KT-743 GLOBAL 0.20 -0.14 0.03 9KT-744 GLOBAL 0.20 -0.35 -0.21 9KL-741 GLOBAL -0.24 -0.44 -0.19 9KL-742 GLOBAL 0.04 -0.05 0.01 9KL-743 GLOBAL -0.04 -0.05 0.01 9KL-744 GLOBAL 0.24 -0.44 -0.19

113/117


-------------------------------------------------------------------------- --- LOADING - VIfi2 Mantenimiento ( Fase inf. 30§ ) --- -------------------------------------------------------------------------- RESULTANT JOINT DISPLACEMENTS SUPPORTS JOINT /-----------------DISPLACEMENT-----------------/ X DISP. Y DISP. Z DISP. 9P8-801 GLOBAL 0.00 0.00 0.00 9P8-802 GLOBAL 0.00 0.00 0.00 9P8-803 GLOBAL 0.00 0.00 0.00 9P8-804 GLOBAL 0.00 0.00 0.00 RESULTANT JOINT DISPLACEMENTS FREE JOINTS JOINT /-----------------DISPLACEMENT-----------------/ X DISP. Y DISP. Z DISP. C-1 GLOBAL -0.05 18.66 -1.89 C-2 GLOBAL 0.03 18.58 0.04 C-3 GLOBAL 0.05 18.59 0.04 C-4 GLOBAL -0.03 18.66 -1.89 C-5 GLOBAL 0.01 17.35 -1.88 C-6 GLOBAL 0.01 17.41 0.03 C-7 GLOBAL -0.01 17.41 0.04 C-8 GLOBAL -0.01 17.35 -1.89 CX-1 GLOBAL -0.01 18.90 -7.95 CX-3 GLOBAL 0.01 18.39 2.84 TS-105 GLOBAL 0.11 16.15 -1.87 TS-106 GLOBAL 0.08 16.28 0.04 TS-107 GLOBAL -0.08 16.27 0.04 TS-108 GLOBAL -0.11 16.15 -1.87 TS-109 GLOBAL -0.02 15.16 -1.85 TS-110 GLOBAL -0.02 15.02 0.04 TS-111 GLOBAL 0.02 15.02 0.04 TS-112 GLOBAL 0.02 15.16 -1.85 TS-205 GLOBAL -0.03 14.48 -1.82 TS-206 GLOBAL -0.04 14.39 0.05 TS-207 GLOBAL 0.04 14.39 0.05 TS-208 GLOBAL 0.03 14.48 -1.82 TS-209 GLOBAL 0.03 13.76 -1.80 TS-210 GLOBAL 0.04 13.84 0.06 TS-211 GLOBAL -0.04 13.84 0.06 TS-212 GLOBAL -0.03 13.76 -1.80 TS-305 GLOBAL 0.10 12.78 -1.77 TS-306 GLOBAL 0.06 12.82 0.06 TS-307 GLOBAL -0.06 12.81 0.06 TS-308 GLOBAL -0.10 12.78 -1.77 TS-309 GLOBAL 0.05 11.92 -1.74 TS-310 GLOBAL 0.07 11.86 0.06 TS-311 GLOBAL -0.07 11.86 0.06 TS-312 GLOBAL -0.05 11.91 -1.74 TS-313 GLOBAL -0.02 10.87 -1.69 TS-314 GLOBAL -0.07 10.97 0.05 TS-315 GLOBAL 0.07 10.97 0.05 TS-316 GLOBAL 0.02 10.87 -1.69

114/117


TS-317 GLOBAL -0.02 10.13 -1.64 TS-318 GLOBAL -0.02 10.00 0.05 TS-319 GLOBAL 0.02 10.00 0.05 TS-320 GLOBAL 0.02 10.13 -1.64 TS-405 GLOBAL 0.08 9.49 -1.59 TS-406 GLOBAL 0.04 9.40 0.04 TS-407 GLOBAL -0.04 9.40 0.04 TS-408 GLOBAL -0.08 9.49 -1.59 TS-409 GLOBAL 0.03 8.86 -1.54 TS-410 GLOBAL 0.04 8.94 0.04 TS-411 GLOBAL -0.04 8.94 0.04 TS-412 GLOBAL -0.03 8.86 -1.54 TS-505 GLOBAL -0.03 8.01 -1.50 TS-506 GLOBAL -0.08 8.02 0.02 TS-507 GLOBAL 0.08 8.02 0.02 TS-508 GLOBAL 0.03 8.01 -1.50 TS-509 GLOBAL -0.10 7.28 -1.46 TS-510 GLOBAL -0.05 7.26 0.01 TS-511 GLOBAL 0.05 7.25 0.01 TS-512 GLOBAL 0.10 7.28 -1.46 TS-513 GLOBAL 0.13 6.38 -1.39 TS-514 GLOBAL 0.04 6.52 -0.01 TS-515 GLOBAL -0.04 6.52 -0.01 TS-516 GLOBAL -0.13 6.38 -1.39 TS-517 GLOBAL -0.04 5.87 -1.33 TS-518 GLOBAL -0.02 5.70 -0.03 TS-519 GLOBAL 0.02 5.70 -0.03 TS-520 GLOBAL 0.04 5.87 -1.33 TS-605 GLOBAL -0.01 5.31 -1.27 TS-606 GLOBAL -0.06 5.17 -0.05 TS-607 GLOBAL 0.06 5.17 -0.05 TS-608 GLOBAL 0.01 5.31 -1.27 TS-609 GLOBAL -0.02 4.78 -1.22 TS-610 GLOBAL 0.03 4.90 -0.07 TS-611 GLOBAL -0.03 4.90 -0.07 TS-612 GLOBAL 0.02 4.78 -1.22 K-5 GLOBAL 0.00 17.41 -1.96 K-6 GLOBAL -0.03 17.38 -0.93 K-7 GLOBAL 0.00 17.35 -0.03 K-8 GLOBAL 0.03 17.38 -0.91 K-109 GLOBAL 0.00 15.03 -1.78 K-111 GLOBAL 0.00 15.15 0.10 K-209 GLOBAL 0.00 13.82 -1.87 K-210 GLOBAL -0.02 13.80 -0.89 K-211 GLOBAL 0.00 13.78 0.00 K-212 GLOBAL 0.02 13.80 -0.89 K-317 GLOBAL 0.00 10.01 -1.71 K-319 GLOBAL 0.00 10.12 -0.01 K-409 GLOBAL 0.00 8.92 -1.47 K-410 GLOBAL -0.02 8.90 -0.79 K-411 GLOBAL 0.00 8.88 0.10 K-412 GLOBAL 0.02 8.90 -0.77 K-517 GLOBAL 0.00 5.71 -1.26 K-519 GLOBAL 0.00 5.85 0.03 K-609 GLOBAL 0.00 4.86 -1.29 K-610 GLOBAL -0.02 4.84 -0.70 K-611 GLOBAL 0.00 4.82 -0.14 K-612 GLOBAL 0.02 4.84 -0.61 M1-209 GLOBAL 0.00 13.59 -6.85 M1-211 GLOBAL 0.00 14.07 1.60 M2-409 GLOBAL 0.00 8.69 -6.29

115/117


M2-411 GLOBAL 0.00 9.17 1.31 M3-609 GLOBAL 0.00 4.50 -6.58 M3-611 GLOBAL 0.00 5.15 0.45 TC-705 GLOBAL 0.20 3.99 -1.14 TC-706 GLOBAL -0.08 3.75 0.00 TC-707 GLOBAL 0.08 3.75 0.00 TC-708 GLOBAL -0.20 3.99 -1.14 TC-709 GLOBAL -0.10 2.79 -1.15 TC-710 GLOBAL 0.02 2.97 0.05 TC-711 GLOBAL -0.02 2.97 0.05 TC-712 GLOBAL 0.10 2.79 -1.15 TC-713 GLOBAL 0.37 2.09 -0.95 TC-714 GLOBAL -0.11 1.74 0.11 TC-715 GLOBAL 0.11 1.74 0.11 TC-716 GLOBAL -0.37 2.09 -0.95 TC-717 GLOBAL -0.28 0.86 -0.97 TC-718 GLOBAL 0.04 1.16 0.12 TC-719 GLOBAL -0.04 1.16 0.12 TC-720 GLOBAL 0.28 0.86 -0.97 E9-729 GLOBAL 0.62 0.48 -0.60 E9-730 GLOBAL -0.15 -0.03 0.16 E9-731 GLOBAL 0.15 -0.03 0.16 E9-732 GLOBAL -0.62 0.48 -0.60 E9-737 GLOBAL -0.01 -0.14 -0.60 E9-738 GLOBAL -0.01 -0.11 0.15 E9-739 GLOBAL 0.01 -0.11 0.15 E9-740 GLOBAL 0.01 -0.14 -0.60 E9-741 GLOBAL -0.42 -0.54 -0.63 E9-742 GLOBAL -0.14 0.04 0.09 E9-743 GLOBAL 0.14 0.04 0.09 E9-744 GLOBAL 0.42 -0.54 -0.63 9K-737 GLOBAL 0.00 -0.18 0.07 9K-738 GLOBAL -0.06 -0.13 0.04 9K-739 GLOBAL 0.00 -0.07 -0.03 9K-740 GLOBAL 0.06 -0.13 0.04 9KT-741 GLOBAL -0.20 -0.36 -0.21 9KT-742 GLOBAL -0.20 -0.14 0.04 9KT-743 GLOBAL 0.20 -0.14 0.04 9KT-744 GLOBAL 0.20 -0.36 -0.20 9KL-741 GLOBAL -0.24 -0.45 -0.19 9KL-742 GLOBAL 0.04 -0.05 0.01 9KL-743 GLOBAL -0.04 -0.05 0.01 9KL-744 GLOBAL 0.24 -0.45 -0.20

116/117

1 / 1 TMD-stub -

8. Cálculo de travesaños del "stub" (barra de anclaje).

El esfuerzo introducido a la fundación de la columna nueva a través del perfil de anclaje se transmite a través de 4 pequeños travesaños en cada pata. Se desprecia la colaboración del rozamiento, el cual queda como margen adicional. Los travesaños se verifican de acuerdo al Manual N°52 del ASCE. Se conserva el total de pernos de uniones de montante. MATERIALES: Hormigón de resistencia 180 kg/cm² Acero de fluencia 3515 kg/cm² (ASTM A572 Gr.50). ESFUERZO: 71712.8 kg x 1.0179 = 72995 kg (Reac.Hip.I, geom.2, apoyo 12P2-801, desproyectada s/montante). GEOMETRÍA: VERIFICACIÓN CONTACTO CON HORMIGÓN: Se verifican 4 perfiles L127x12.7H de longitud b = 20 cm:

x = t √(Fy /(1.19 f’c)) = 12.7 √(3515 /(1.19 180)) = 51.3 mm

bnec. = P / ( 1.19f’c (t + r + x/2)) = = 72995 / (1.19 180 (1.27+1.27+2.57)) = 66.7cm < 4 x 20 = 80cm.

b x r+t

r t

117/117

I N D I C E. - appcenter.grupoice.com · El dimensionamiento de barras y uniones se efectúa de...

Documents

Transcript of I N D I C E. - appcenter.grupoice.com · El dimensionamiento de barras y uniones se efectúa de...